When you take the KCl conditioning vial of the pH probe, you have to hold the clear vial part and twist the white part anti-clockwise, therefore the vile will be gently released. When you finish analysis put it back on and twist it clockwise direction to seal it.
at 2:05 you don't have to pull out the probe from the 3M KCL soaking tube. Simply rotate the upper flexible screw of the soaking tube and the probe will come out itself without any forced rotation of the soaking tube from the bottom. Else it may damage the probe bulb in process.
Hello I hope you are doing well May I ask that why u didn't press End after that Save Also I have problem with my ph meter which one of the puffer always can not be celebrated
Hi Dr Fun thanks for the education video. I'd like to ask you about: (#good safety habit), is it just a hashtag on twitter or there is a youtube video channel dedicated to safety habits videos? thanks in advance
Seriously do you think you did it right? You calibrated your instrument by standard buffer 4.01, followed by 9.21 and finally by 7.00. And after calibration you pressed exit button without even pressing END button hence not saving your calibration into your instrument. Consequently no slope can be displayed by your instrument since you didn't even ended your calibration and saved it. Correct me if I am wrong if you disagree.
Good Question. Would you please, refer me some of best companies to purchase a Ph meter? One reliable, robust too for industrial use. Thanks! (hafizusamma@mpcl.com.pk)
Great and clear explanation, i love that, but I have a question, what we have to do if the pH meter measure wrongly or inaccurate when calibrating the buffer solution, like when the actual pH value of the buffer is 4.01 but the pH meter show the value of 4.51 then what should we do?
@@chemfunman I don't mean the probe itself, I mean the buffer solution. Is it still as accurate as the original measurements before callibrating the meter?
when i select Menu structure of pH/ion, the display only show two mode 1 Sensor ID/ IM and 2 Calibration Setting. I choose mode 2 but the machine don't show mode Buffer Group/ Standard. On the other hand, at the main display, the machine in Router mode, i can't calibration the group buffer 4, 7, 9.21 because this machine mesure not exactly. Can you help me the method to this machine return as originally, when i press menu structure of pH/ion have 7 mode. Thank you!!
SUBSCRIBE NOW to this channel now to receive more great chem videos! Connect with me on Facebook | facebook.com/chemfunman/ Twitter @chemfunman (twitter.com/chemfunman) Stay safe! “Ever tried. Ever failed. No Matter. Try again. Fail again. Fail better.” - Samuel Beckett
what if my first two calibrations go well and the third one shows 10.01 instead of 9.21?? what could go wrong?? possibly it does not measure properly above 7???
great explanation, got my pH meter calibrated with your help. Thanks
When you take the KCl conditioning vial of the pH probe, you have to hold the clear vial part and twist the white part anti-clockwise, therefore the vile will be gently released. When you finish analysis put it back on and twist it clockwise direction to seal it.
thank you very much!
Very clear explanation. Thank you so much sir
You are welcome
Interesti9ng how they do things in different countries. I always learn something New. Hello from the USA!
appreciate your comment! hello from Singapore, James!
at 2:05 you don't have to pull out the probe from the 3M KCL soaking tube. Simply rotate the upper flexible screw of the soaking tube and the probe will come out itself without any forced rotation of the soaking tube from the bottom. Else it may damage the probe bulb in process.
afzal shahbaz that’s right!
Very useful video, thanks teacher!
most welcome!
Very well demonstrated
Thank you!
Thanks! I already missed these videos.
you are most welcome :')
it would be helpful though if you told us why we do certain things like taking steps to remove the bubbles
would you like to chip in , appreciate if all do out part ! ^^
Very well explained. Thanks.
thank you very much! please subscribe and share this video with your friends!
thanks for the video...it's really useful
You are most welcome
thanks a lot, it was amazing.
just a question, how I can prepare the buffers (4,9, and 7)?
we bought them from the store.
I think you can rotate white plastic top to unscrew it from the KCl container
Daniel Arroyo you are right!
thank you very much!!^^
Hello
I hope you are doing well
May I ask that why u didn't press End after that Save
Also I have problem with my ph meter which one of the puffer always can not be celebrated
I don’t understand your last sentence
Sorry I meant calibrated @4&7ok but when I come to 10 display showed out of the range
Hi Dr Fun
thanks for the education video.
I'd like to ask you about: (#good safety habit), is it just a hashtag on twitter or there is a youtube video channel dedicated to safety habits videos?
thanks in advance
Both!
thank you...
thanks a lot
Seriously do you think you did it right? You calibrated your instrument by standard buffer 4.01, followed by 9.21 and finally by 7.00. And after calibration you pressed exit button without even pressing END button hence not saving your calibration into your instrument. Consequently no slope can be displayed by your instrument since you didn't even ended your calibration and saved it. Correct me if I am wrong if you disagree.
Good Question. Would you please, refer me some of best companies to purchase a Ph meter? One reliable, robust too for industrial use. Thanks! (hafizusamma@mpcl.com.pk)
he calibrated the buffer ph7 first 😏 lmao don't comment when you can't comprehend.. and one more thing, not all ph meter are the same...
A good video
Glad you enjoyed it
Great and clear explanation, i love that, but I have a question, what we have to do if the pH meter measure wrongly or inaccurate when calibrating the buffer solution, like when the actual pH value of the buffer is 4.01 but the pH meter show the value of 4.51 then what should we do?
plot a calibration curve, and adjust accordingly
Won't we risk contaminating the buffer solutions if we were to directly dip the proble into the buffer solution storage?
can wipe quickly
@@chemfunman I don't mean the probe itself, I mean the buffer solution. Is it still as accurate as the original measurements before callibrating the meter?
Wow..
Muntaha Fazal that’s an old game
Muntaha Fazal legendary
Nice
Thank's but I have a problem when l calibration read only one calibration 1 don't read calibration 2
reset?
when i select Menu structure of pH/ion, the display only show two mode 1 Sensor ID/ IM and 2 Calibration Setting. I choose mode 2 but the machine don't show mode Buffer Group/ Standard. On the other hand, at the main display, the machine in Router mode, i can't calibration the group buffer 4, 7, 9.21 because this machine mesure not exactly. Can you help me the method to this machine return as originally, when i press menu structure of pH/ion have 7 mode. Thank you!!
Do you need a buffer with higher pH value for solution to be measured at a higher pH ?
need it for calibration.
How to plot pH graph with different buffer solution
Sir telugu mediam sir please
What type of error gave the PH meter to find out PH..?
Sir I want slope calculation on 3 buffers calibration ND u miss the slope value in this video...
slope is the measure of the linearity of the calibration - is it accurate? can we believe the readings? with what type of precisions?
Hello, I have a problem with Cal2, it show wrong buffer, what could be wrong?
the comments show "wrong buffer"? check if the buffer is new. because it is prone to pH change when used for a long time.
SUBSCRIBE NOW to this channel now to receive more great chem videos!
Connect with me on
Facebook | facebook.com/chemfunman/
Twitter @chemfunman (twitter.com/chemfunman)
Stay safe!
“Ever tried. Ever failed. No Matter. Try again. Fail again. Fail better.”
- Samuel Beckett
Please tell what does offset and slope mean in pH meter?
offset is the variance - inherent error by any instrument
slope is the measure of the linearity of the calibration - is it accurate? can we believe the readings? with what type of precisions?
Can u explain hau to change temperature setting from fareinheit to celcius on display, please share
Let me figure out
What is purpose of slop and offset limit?
slope is the measure of the linearity of the calibration - is it accurate? can we believe the readings? with what type of precisions?
@@chemfunman After calibration u can verify by buffer
Do you only need to calibrate once or every use? Or just after every session?
Yes per session
please what's the role of Kcl
prevent leaching of water via osmosis. if this happens, the KCl crystallize. forming an ionic salt. immobilized ions
prevent leaching of water via osmosis. if this happens, the KCl crystallize. forming an ionic salt. immobilized ions
prevent leaching of water via osmosis. if this happens, the KCl crystallize. forming an ionic salt. immobilized ions
why use pH 7 first?
neutrality is always unbiased. that is the best reference.
I need this machine
This machine is BEAST.
what if my first two calibrations go well and the third one shows 10.01 instead of 9.21?? what could go wrong?? possibly it does not measure properly above 7???
did you try again?
My favourite part of my job is staring at the screen as it... slowly... calibrates. Weighing scales are even worse :/
oh dear!
haha Slam dunk enthusiast??
Syifaq Azlan not bad you recognise!
Syifaq Azlan very good series
@@chemfunman childhood anime