What an excellent series. I just finished rebuilding my ms 250 thanks to you. I can't believe how you got the impulse line and your camera in such a tiny space. Well done video! I appreciate you taking the time to put it together for those of us who don't know chain saws.
Hi Dony! Thanks for for the tutoring! Your videos are always a great help. Just an observation, when you install the intake boot, you can wrap a string around it and pulled it thru the casing hole. It is a lot easy to install it! Thx!
thanks donny, this video in particular helped me rebuild an ms 250 for my brothers company, its 1:00 in the morning and i spent hours scratching my head trying to figure out the switch configuration and in seconds you solved it by saying the metal spring goes on-top of the plastic... you are a legend amongst men!!
Thanks for the video. I took the carburetor on my MS250 apart 6 months ago, since the saw was running really bad last year. I only put everything back together yesterday, after buying a new carb repair kit on Ebay. After so long, I wasn't 100% sure how everything went back together but your video helped a lot. I put new gas in it, cranked it a couple of times, and it worked right away, with as much power as the day I bought it. Just had to adjust the idle a little. Works great now.
donyboy.I couldn`t start my saw, went to check the spark plug,and noticed a loose wire.2.21 on your video tells me this works as part of the switch and showed me where this should go.Followed your instructions,now the chainsaw works fine.You`ve probably saved me a lot of trouble and money.Many thanks for such a informative video.
Great, thanks to your vid I found out how the kill switch arrangement should be like. Now my saw can be shut down without letting it run out of gas, lol. Thanks !
hi i have saw 25 inch shil when i spray crburator cleaner is never work at all what shall i do before what good then when i turn its stop bye self then i pust carburator clean is never running thanks for youif you could help me for problem
just bought a used ms250 and i opened it to check the air filter, i saw a tube with a small looking plastic filter... i just saw it on your video when you mentioned "adjusting screw boot cover" looks like its attached to that rubber boot...MY saw does not have that boot, so the filter is sitting in the housing, is this ok or does it need that boot cover to hold it???
What an excellent series. I just finished rebuilding my ms 250 thanks to you. I can't believe how you got the impulse line and your camera in such a tiny space. Well done video! I appreciate you taking the time to put it together for those of us who don't know chain saws.
Hi Dony! Thanks for for the tutoring! Your videos are always a great help. Just an observation, when you install the intake boot, you can wrap a string around it and pulled it thru the casing hole. It is a lot easy to install it! Thx!
thanks donny, this video in particular helped me rebuild an ms 250 for my brothers company, its 1:00 in the morning and i spent hours scratching my head trying to figure out the switch configuration and in seconds you solved it by saying the metal spring goes on-top of the plastic... you are a legend amongst men!!
Thanks for the video. I took the carburetor on my MS250 apart 6 months ago, since the saw was running really bad last year. I only put everything back together yesterday, after buying a new carb repair kit on Ebay. After so long, I wasn't 100% sure how everything went back together but your video helped a lot. I put new gas in it, cranked it a couple of times, and it worked right away, with as much power as the day I bought it. Just had to adjust the idle a little. Works great now.
donyboy.I couldn`t start my saw, went to check the spark plug,and noticed a loose wire.2.21 on your video tells me this works as part of the switch and showed me where this should go.Followed your instructions,now the chainsaw works fine.You`ve probably saved me a lot of trouble and money.Many thanks for such a informative video.
THANKS FOR WATCHING
your videos have pretty well touched on every part of the chainsaw, thanks for sharing your knowledge in a very learnable way...
Very well done boss thank you so much for the time and knowledge it's much appreciated couldn't have done it without ya!!!
Me too.... I'm not sure how that spring thing managed to get around the back! Works a treat now! Thanks very much..
Great, thanks to your vid I found out how the kill switch arrangement should be like. Now my saw can be shut down without letting it run out of gas, lol. Thanks !
Thank you for sharing these excellent videos and instructions. I am VERY grateful.
you're welcome sir!
hi i have saw 25 inch shil when i spray crburator cleaner is never work at all what shall i do before what good then when i turn its stop bye self then i pust carburator clean is never running thanks for youif you could help me for problem
Its already been said but thanks for showing how the choke switch goes together.
@aaronac8 around .030 usually ok out of package,
@vzarou probably needs a new carburetor rebuild kit
@dragevo2 you're welcome
Very nice video
goo job!
just bought a used ms250 and i opened it to check the air filter, i saw a tube with a small looking plastic filter... i just saw it on your video when you mentioned "adjusting screw boot cover" looks like its attached to that rubber boot...MY saw does not have that boot, so the filter is sitting in the housing, is this ok or does it need that boot cover to hold it???
Muy buen video.
HI,where would you say do the wires for the coil go,they all have to touch some kind of metal?
What is the gap for the spark plug?
i would prefer a bosch spark plug