Hi Janamejaya, I appreciate your passion and good carreer progress. Good luck. Btw, what tool do you use for block diagrams? It is not easy to draw and write text in/on the blocks with latex. I am curious what tool you are using. Kind regards.
I used inkscape, you can also edit any vector graphics file with it (.svg extention). Inkscape has extensions called TexText which are useful for entering formulae in the drawings.
Dear sir, Thank you very much for sharing your experience. I have been looking for those courses on Coursera that you had stated in the video but I still couldn't find them. Could you please show me some links to those online courses? I would be very appreciate. Best Regard
Sir can you tell how much of embedded system skill is required for a power electronics engineer..can i learn it on my own or should i join embedded course in a training institute (i completed btech in electrical..i am interested in doing research in power electronics field)
You can start by buying any inexpensive Launchpad board by Texas Instruments and start configuring it. You can look at boards at in.element14.com. You can learn most of it on your own if you work on these skills for 10 to 12 hours everyday (if you have such time right now.)
@@Janamejaya.Channegowda thank you sir..Can you also tell me the list of most common and useful software or programming languages i should learn that will be helpful when i do masters and phd in power electronics
@@vishwanathhebbalad5967 You can start basic simulation, job will depend on companies requirement and the skill set they want. I would suggest you start with basic simulation to improve your skills.
@@Janamejaya.Channegowda Sir, I know basic simulations like matlab for power electronics designing.Sir are you from karnataka.I am interested to in power electronics designing for electric vehicle.how is this domain sir.
I Recently started my job as an pcb designer working as schematic and layout both working with memory interface spi i2c and little power electronics Is there any way to get in big companies like Texas instrument or any other companies I have done my BE from Mumbai college
I completed my Engineering in electrical and electronics and I have interest to work on power electronics hardware circuit designing for electric vehicles.please tell me how is the future in this domain.
You can start by auditing these courses: 1) www.coursera.org/specializations/power-electronics 2) www.coursera.org/learn/battery-management-systems 3) ruclips.net/video/P0MK7sWfs9k/видео.html 4) ruclips.net/video/khzMZ8VL8Q4/видео.html
Which skills should I develop , so that I can get a power electronics or even a power system job in India ?? Please, Sir guide me.. I am doing MS(Research) in power electronics domain.
I would suggest building a low power DC/DC converter and testing it in the lab. Google "Texas instruments Reference design". Select a design and build it in your lab.
Sir what is the pre requirements things that i should done for job in power electronic company.... Please suggest I am 2020 pass out student from normal college and i have more interests in power electronic...
Hello Rahul, basic understanding of magnetics is very important, please go through NPTEL lectures of Prof V Ramanarayanan and L Umanand first. Start with basic simulations using LTSpice or any other simulation software. After this, you can start with basic hardware experiments.
Sir , is it possible to get job in India for Power Engineering domain through LinkedIn ? Is it a good option in India to use a premium version of LinkedIn ?
Yes, but it will take time, around 3 to 6 months. I would recommend reaching out to people and applying to jobs on LinkedIn. If you can afford it, yes, I used LinkedIn premium for around 6 months.
Hi sir I completed diploma in Electronics and I am having 2 years of working experience in Vsat field. I fed up with my job .now I am planning to do post diploma in power electronics is my decision is good??
What is Vsat?. Personally I wouldn't recommend one more diploma. If you want to improve your credentials, complete engineering. Bachelor of Engineering is more than enough for industries.
There are jobs related to power supply/ EV Charger and there are jobs related to battery management system/State-of-Charge estimation. Focus on one sub area and try to start of with basic simulation and then build some hardware to gain expertise.
Very Nice the way of explaining your past technical experiences.
thank you very much sir for sharing your experiences.
Hi Janamejaya, I appreciate your passion and good carreer progress. Good luck.
Btw, what tool do you use for block diagrams? It is not easy to draw and write text in/on the blocks with latex. I am curious what tool you are using.
Kind regards.
I used inkscape, you can also edit any vector graphics file with it (.svg extention). Inkscape has extensions called TexText which are useful for entering formulae in the drawings.
@@Janamejaya.Channegowda Many thanks Janmay
Dear sir,
Thank you very much for sharing your experience.
I have been looking for those courses on Coursera that you had stated in the video but I still couldn't find them.
Could you please show me some links to those online courses? I would be very appreciate.
Best Regard
Hello, those courses were offline/in-person courses, not available on Coursera.
What are the upcoming topology or configuration for EVs ?
Which power converter topology are you referring to?. Motor drive or on board charger?.
Sir can you tell how much of embedded system skill is required for a power electronics engineer..can i learn it on my own or should i join embedded course in a training institute (i completed btech in electrical..i am interested in doing research in power electronics field)
You can start by buying any inexpensive Launchpad board by Texas Instruments and start configuring it. You can look at boards at in.element14.com. You can learn most of it on your own if you work on these skills for 10 to 12 hours everyday (if you have such time right now.)
@@Janamejaya.Channegowda thank you sir..Can you also tell me the list of most common and useful software or programming languages i should learn that will be helpful when i do masters and phd in power electronics
@@KG_001 LTspice
Iam ready to do specialozation in power electronics and automation.pls suggest the useful couses like python,pcb any one useful my career.pls sir
nptel lectures by Prof v ramanarayanan. Coursera, power electronics www.coursera.org/specializations/power-electronics
Sir tell me which are the best softwares used for power electronics circuit designing and that are also used by designing companies.
LTspice: www.analog.com/en/design-center/design-tools-and-calculators/ltspice-simulator.html
@@Janamejaya.Channegowda Thank you for your reply inspite of your busy time.
Can I get a job by learning Lt-Spice software.
@@vishwanathhebbalad5967 You can start basic simulation, job will depend on companies requirement and the skill set they want. I would suggest you start with basic simulation to improve your skills.
@@Janamejaya.Channegowda Sir, I know basic simulations like matlab for power electronics designing.Sir are you from karnataka.I am interested to in power electronics designing for electric vehicle.how is this domain sir.
What are the design software course for power electronics sir.
ruclips.net/channel/UC4fShOOg9sg_SIaLAeVq19Q
Check this.
I Recently started my job as an pcb designer working as schematic and layout both working with memory interface spi i2c and little power electronics
Is there any way to get in big companies like Texas instrument or any other companies I have done my BE from Mumbai college
Definitely possible, check for vacancies on their official career page and apply to relevant positions.
Please share the link of your website. It is not opening.
Hello, I don't have a website right now, let me know if you needed anything specific.
There is no course which named as electrification and transportation in coursera
It was the one taken at my University, in person class, it's not in coursera.
I completed my Engineering in electrical and electronics and I have interest to work on power electronics hardware circuit designing for electric vehicles.please tell me how is the future in this domain.
You can start by auditing these courses:
1) www.coursera.org/specializations/power-electronics
2) www.coursera.org/learn/battery-management-systems
3) ruclips.net/video/P0MK7sWfs9k/видео.html
4) ruclips.net/video/khzMZ8VL8Q4/видео.html
Hi sir,
Is their any courses, softwares are required to learn for a power electronics engineer.
You can start with LTSpice for simulation.
Which skills should I develop , so that I can get a power electronics or even a power system job in India ??
Please, Sir guide me..
I am doing MS(Research) in power electronics domain.
I would suggest building a low power DC/DC converter and testing it in the lab. Google "Texas instruments Reference design". Select a design and build it in your lab.
@@Janamejaya.Channegowda Thank You, very much, sir.
Would you please provide the links for the courses sir
The courses were offline/in person courses.
@@Janamejaya.Channegowda thanks for your reply sir , May I know are the opportunities in the field of Power electronics in Canada ?
@@sanjusrinivas980 Murata, Borg Warner, Continental, GM, Rockwell are some of the companies in Canada.
@@Janamejaya.Channegowda thanks a lot sir
Which subject is good fir specialization in Electrical engineering? Can Power electronics and drives be better?
Yes PE and Drives are good, there will be more jobs in the future due to push for EVs.
@@Janamejaya.Channegowda sir is there any scope for specialization in power systems
@@rameshsai6078 Yes, significant amount of work is being done on power quality issues and you can find jobs in smart grid/microgrid areas.
Sir what is the pre requirements things that i should done for job in power electronic company.... Please suggest I am 2020 pass out student from normal college and i have more interests in power electronic...
Hello Rahul, basic understanding of magnetics is very important, please go through NPTEL lectures of Prof V Ramanarayanan and L Umanand first. Start with basic simulations using LTSpice or any other simulation software. After this, you can start with basic hardware experiments.
@@Janamejaya.Channegowda thanku sir
Sir , is it possible to get job in India for Power Engineering domain through LinkedIn ?
Is it a good option in India to use a premium version of LinkedIn ?
Yes, but it will take time, around 3 to 6 months. I would recommend reaching out to people and applying to jobs on LinkedIn.
If you can afford it, yes, I used LinkedIn premium for around 6 months.
Thank You, Sir
Hi Sir, I've done B.E in POWER ELECTRONICS and I'm planning to do mtech in Power Electronics. Which is best company for Power Electronics?
Many are there like:
Mahindra Electric Mobility
Ola Electric
Ather
Delta Electronics
Texas instruments
You can search more on indeed.com as well.
@@Janamejaya.Channegowda Thank you
Very useful channel for power electronics student.
Hello sir, I am doing my mtech in power electronics from iit Delhi can I get any chance of placement
What is your project about?. Are you building any hardware?.
Hi sir I completed diploma in Electronics and I am having 2 years of working experience in Vsat field. I fed up with my job .now I am planning to do post diploma in power electronics is my decision is good??
What is Vsat?. Personally I wouldn't recommend one more diploma. If you want to improve your credentials, complete engineering. Bachelor of Engineering is more than enough for industries.
VSAT (Very small aperture terminal) is a satellite communication system.
Now I am planning to join post diploma in power electronics course in NTTF Clg
@@Janamejaya.Channegowda thanks sir for your reply
@@dhanushm.s9608 what is the end goal?. I would recommend to complete Engineering, you will have more opportunities than one more diploma.
Sir, I how to get job in power electronics company's
There are jobs related to power supply/ EV Charger and there are jobs related to battery management system/State-of-Charge estimation. Focus on one sub area and try to start of with basic simulation and then build some hardware to gain expertise.
Sir reply madi
I did, you deleted your comment.