Ford is the best car manufacturing in UNITED STATES I can't wait to get the Ford bronco, greetings from the super ancient megalithic city of TIAHUANAKU BOLIVIA 🇧🇴
Always on duty...2017 F350 super duty xlt 6.7L power stroke scorpion diesel reporting at 73,500 miles and counting...it hauls a 32 feet rv trailer all the time in the Nevada desert...thank you men and women at ford Kentucky plant for a fine product.
I'm trying to learn more about manufacturing at large scale. Simple "plant tour" footage like this is in many ways better than an expensive in-person visit. Thanks.
31:22 That's where my 2000 Explorer was built. The transmission lasted 314,000 miles before it started leaking, but it still shifted fine if I added fluid. The engine is still going strong even though I overheated it really bad in 2015 when my heater hose broke and I lost all my coolant. One of the cylinders finally started leaking in 2018 because one of the heads was slightly warped from the overheating. I put on new heads and the engine still runs like new.
@@charliehicks5676 Yes it has. It lost all the electronics after an auto update and had to get updated at the dealer for everything to come back alive. It currently has a dead backup camera and it’s going in tomorrow for broken drivers side window switches. It has a little over 4,000 miles. Lots of problems but my wife likes the vehicle itself.
I love those trucks in spite I can't afford a single one. I used to love the North american enterpreneurship spirit. Thanks you guys over there. I hope corporations keep up with their workers spirits and drive.
Унас был Ford transit 1992года выпуска микроавтобус, отличная машина,двигатель дизельный 2,5l. 4FA .Звук матора просто технический-приятно было слышать.
Ford switching to aluminum bodied pickup trucks a few years ago was really brave move. Never checked if it has hurt their sales share. Ford pickups have a cult following, so probably not.
@@BartStar009 Idk to much about transmissions or whatever you just said but my father owns a F150 with the ten soeed and can confirm it’s garbage shifts like shit it’s like a old ass 4 speed that’s been rebuilt more than it’s should just garbage
@@ghostmofo5829 No rust at all. Ford better get themselves a new transmission. I haven't seen a rusty dodge since the model year 2008. If you don't know what you're talking about then shut up.
Can I use clips from this in my own RUclips video about the truck I drive? I would keep the bug in the corner and attribute the footage to the wheel network.
I'm I the only person that noticed the assembler with a STX badge is his hand at 2:42 into the video, with a XLT badge installed a couple seconds later?
From my experience working at a Japanese car manufacturer in America, things are done more differently at Ford. I also seen workers wearing headphones while they work, which is a big no no for us. Even tho things are done a lot differently between the two, the equipment we use is pretty similar to what you see in this video.
@@rons4778 I understand that they might be used for hearing protection but at some points of the video you see them wearing their wireless earbuds with only one plugged in. They don’t serve much hearing protection especially if the volume of the music is turned all the way up. Not to mention that hanging headphone could get caught on equipment or could scratch a car if they are working close enough to the vehicles body.
Hello, I'm Youssef. Can you help me, I have a suggestion for an internal combustion engine with a new system that differs from the traditional system. I invented it
I'm a cnc machining manufacturer, I make product for all sorts of companies it's the higher end heads that want more money and us to suffer to make product faster cheaper less quality checks because it's a sellers market
Worked for Ford for 31 years, Cleveland engine and foundry, Minnesota truck plant, and Avon Assembly. Great job. I appreciate those years.
My 72 Ranchero with a 351 Cleveland is still running strong today thanks to people like you
Ford is the best car manufacturing in UNITED STATES I can't wait to get the Ford bronco, greetings from the super ancient megalithic city of TIAHUANAKU BOLIVIA 🇧🇴
Luis , i work for Ford for 25 years in Europe ,
@@robertneven7563 awesome
You are very wrong I work there 30 years there are the biggest lying cheating organization known to man except for Enron
uawsux @ Just a disgruntled employee, or should I say past employee? They must have shit canned you.
My 2014 F-150 made in Kansas City just turned 133k miles, going strong!
Always on duty...2017 F350 super duty xlt 6.7L power stroke scorpion diesel reporting at 73,500 miles and counting...it hauls a 32 feet rv trailer all the time in the Nevada desert...thank you men and women at ford Kentucky plant for a fine product.
I'm trying to learn more about manufacturing at large scale. Simple "plant tour" footage like this is in many ways better than an expensive in-person visit. Thanks.
Glad it was helpful!
Antonmursid
🇮🇩🙏🙏🙏🙏🙏
31:22 That's where my 2000 Explorer was built. The transmission lasted 314,000 miles before it started leaking, but it still shifted fine if I added fluid. The engine is still going strong even though I overheated it really bad in 2015 when my heater hose broke and I lost all my coolant. One of the cylinders finally started leaking in 2018 because one of the heads was slightly warped from the overheating. I put on new heads and the engine still runs like new.
Just ordered my 2021 F-150 - Thank you all for your dedication and hard work! 💪🏾
I got a 20 Explorer and a 20 F150 last year. It’s fun getting to see how they built them both.
Has the Explorer broken down yet?
@@charliehicks5676 Yes it has. It lost all the electronics after an auto update and had to get updated at the dealer for everything to come back alive. It currently has a dead backup camera and it’s going in tomorrow for broken drivers side window switches. It has a little over 4,000 miles. Lots of problems but my wife likes the vehicle itself.
@@JohnnyLally Jesus Christ. I guess I'm going with a Durango.
I’m an engine mechanic, asset certified and I work for a Ford dealership. I bet I’ve had one of these vehicles apart. Cool to see them made
I love those trucks in spite I can't afford a single one. I used to love the North american enterpreneurship spirit. Thanks you guys over there. I hope corporations keep up with their workers spirits and drive.
Crazy how you see how the process on certain things hasn't changed over the years.
Just got my second Ford I'm very happy
what Ford models you have?
SO ENJOYABLE AND INTERESTING TO WATCH,,, THAT THE DOCUMENTARY COULD HAVE 3 HOURS. GRATEFUL.
I own 1975 ford f-100 and a 2014 raptor. Both are built great 👍
Nice to see Ford still producing the Police Interceptor.
The tastiest part of the video,,, is the very end,, with images in black and white (gray...), when most of us weren't born. Congratulations!!! ( = (
It amazes me is how much cordless tools have become the tools of choice for many professions.
Beautiful professional team working together . Ford my favorite SUV .
Унас был Ford transit 1992года выпуска микроавтобус, отличная машина,двигатель дизельный 2,5l. 4FA .Звук матора просто технический-приятно было слышать.
Workers thoughts as they drive them off the line...." I wonder what dumb azz is going to wreck this nice ford"
I wish I could get an assembly line job at Ford but they don’t have any where I live.
Be careful what you wish for!...it's busy work
@@thebolt5681 i don’t have a problem with that, I work hard. M
Read my commentary they have a lottery for jobs you missed out at $150,000 a year for sleeping you can afford to move
If you’re not a tree you can move
Robotics, 3D Printing, Exoskeleton suits... oh my!
Ford the best American industry!!
Ford sucks, I prefer Chevrolet
@@bmwautobots2492
I like chevrolet too!!
@@bmwautobots2492 you're a bot
@@bmwautobots2492 lol bot your German cars are ass
@@yellowmom2875
German cars are piece of junk.
Fine looking pieces of machinery.
So much robotic and computer timing involved in building of cars. 👍
Awesome and cool it's so rare to see this
FIRST in the Planet to make trucks with aircraft Grade Aluminum ! way to Go Ford
Ford rangers are very popular now on uk roads
Ford switching to aluminum bodied pickup trucks a few years ago was really brave move. Never checked if it has hurt their sales share. Ford pickups have a cult following, so probably not.
Thanks to the Dearborn truck F-150 plant for making my 2018 xlt 2.7 sport 4x4
go back and notice the honeycomb clutch bans inside your 10 speed transmission that makes it junk
@@BartStar009 Idk to much about transmissions or whatever you just said but my father owns a F150 with the ten soeed and can confirm it’s garbage shifts like shit it’s like a old ass 4 speed that’s been rebuilt more than it’s should just garbage
@@anthonyrizzo255 To be fair, it is a GM transmission😂. Tell him to get a RAM 1500. I can't even feel it shift.
@@gasolinediesel972 Your fca product will be rusting through in 6-7 years. Enjoy that.
@@ghostmofo5829 No rust at all. Ford better get themselves a new transmission. I haven't seen a rusty dodge since the model year 2008. If you don't know what you're talking about then shut up.
Impressive Huge Manufacturing and wow technology using Robots!!
Ford built without your tax dollars👍
స్జ్ఫజిఫజే
Except all those sweet government sales and service contracts.
You'd have to pay taxes first.
just imagine the cost of equipment and tools just to build these vehicles .
Well the reality is robots pay for themselves with the people they don't have to pay to do the same tasks. Painting and welds are perfect examples
The Best Never Rest!
Just enough paint to cover the dark spots and just enough clear to make it look good.
Anyone else watch the whole thing?
Just one word AWESOME !!! THANKS !
Fantastic and magnífic the Ford vehícles...
Why on earth did i just watch over an hour of how they make fords LOL. interesting video, seems like a cool job to have.
Do they stop for lunch
Sou do Brasil e amo a Ford F 150 e show.
To many interruptions with commercials.
I Love Ford!! Built Ford Tough!!
do they make 1/2 and 3/4 ton trks.all i see at the dealers are 4 door cars with open trunks.a trk has a cab and a 8ft.bed.
Watched this right after watching the Skoda one.
I want a Skoda...
26:41 Hehhehheh Hey Bevis, they just polished the knob.......
Can I use clips from this in my own RUclips video about the truck I drive? I would keep the bug in the corner and attribute the footage to the wheel network.
I love Ford! 💖👍
Siempre es necesario la mano de obra de la gente las máquinas no nos reemplazan en todo eso es bueno las familias obtienen sus ingresos
God ☝️ BLESS 🙏 UNITED STATES 🇺🇲💪
so which robot made my doors not latch properly on my f150 lol
I'm I the only person that noticed the assembler with a STX badge is his hand at 2:42 into the video, with a XLT badge installed a couple seconds later?
Yes this is what I'm talking about Ford All American Maiden built in America
Always wondered, in lots of these videos there are weird electronic tunes playing in some clips. What are these?
I'm guessing it's a general announcement for the employees.
Great work ethic now I know why fords come to the dealer incomplete check out all the bsers slacking.
From my experience working at a Japanese car manufacturer in America, things are done more differently at Ford. I also seen workers wearing headphones while they work, which is a big no no for us. Even tho things are done a lot differently between the two, the equipment we use is pretty similar to what you see in this video.
The head phones are hearing protection you use plugs but some people cannot handle them in their ears so noise cancelling head phones are used
@@rons4778 I understand that they might be used for hearing protection but at some points of the video you see them wearing their wireless earbuds with only one plugged in. They don’t serve much hearing protection especially if the volume of the music is turned all the way up. Not to mention that hanging headphone could get caught on equipment or could scratch a car if they are working close enough to the vehicles body.
Ford's latest rules allow 1 ear bud, the other ear must remain open or have ear plug.
Hello, I'm Youssef. Can you help me, I have a suggestion for an internal combustion engine with a new system that differs from the traditional system. I invented it
Whats with all the 'muzak" like beeping tones playing through the various plants?
7:22 Ford transit Gray is company Amazon
Awesome video
Ich bin Hisham aus Ägypten, Automechaniker und habe ein Handelsdiplom. Gibt es eine Arbeitsmöglichkeit?
I will take that King Ranch also.
Henry Ford would be impressed!!
Henry would call Charlie Sorensen and say why can’t we do this
One finish F150 vehicle off assembly line every 58 seconds, 1200 vehicles a day at the Rouge,
Amazing!
Where Ford Explorer manufactured? I need their address ?
2008 Ford did not take a bailout
No they denied warranty coverage's to Powerjoke and other vehicle owners and made billions in savings sticking the repairs on buyers.
Very nice of USA
Why isn’t the Maverick being made in USA?🤔
I love my explorer!
Where Ford cars are built ? I need their address ?
where are the robottics made??
Why in the thunder did Ford use a clutch style, cooling fan.... on ranger
I love it good jobs 😌 ☺ 👌
I'm a cnc machining manufacturer, I make product for all sorts of companies it's the higher end heads that want more money and us to suffer to make product faster cheaper less quality checks because it's a sellers market
Gracias por la ilustración.
I'm pleased with my Mustang.
How much pay per hour?
Wow. . .amazing great😃😃😃ford company😃👏👏😃yeah. . .woe so great😃
Ford trucks and cars are the best in Nord America.
Good to watch
I work in Ford of Oakville Ont Canada. We are required to wear a mask in the plant why is it different in the US?
This was filmed at different locations at different times. Look at the description that shows the model year.
@@jamesrobinson1022 thanks brother for that info.
What are those musical notes in the back ground noise?
They are alerts to an issue. It could be a machine faulted out or low parts.
@@ghostmofo5829 cool, Thanks.
2:48 Evidently Ford forgot to tell this guy to lose the Apple Q-tips.
Nice!
Было бы круто здесь работать !
Hell yea
I will take an F-150. Thank you.
I will take a Ranger.
ส่วนตัวชอบครับ
Why are all the employees still wearing masks?
Hello, I am a truck driver. I live in Iraq. I want to work in your country, I have enough experience
Cool US do it with care
I don't think my country would do it so cleanly and carefully (My country don't make cars)
Exelente
Because at Ford, Quality is something we design out of the products to keep our dealerships happy.....
Design out as is it's missing to keep the dealer service dept happy?
ใส่เทดนิดเช่นกล้องถอยจอดอัดโนมัต
We make those front bumpers
Very neat
These clips are aaaaall mixed up
Am thinking in selling my 2011 f150 and getting a 2021 Tacoma 💁🏼♂️
هاذي جميعها المنتجات والصناعات تمت عادل. اشواء فكرته احد غيري ."
"."