MASSEY 3000 SERIES 3PT AND A SHOUTOUT
HTML-код
- Опубликовано: 12 сен 2024
- A more in depth look at the electronic hitch controls on the 3000 series massey. (Autotronic not Datatronic) and a shoutout to my buddy Andrew, check out his channel One O.A.K here: / @farmerjacked9079
CLICK TO SUBSCRIBE: goo.gl/Y2RD5W
My Recent Videos: goo.gl/lAtNZN
Snow Plowing: goo.gl/cih5Fv
Silage Making: goo.gl/Cu9MPH
Spreading Manure: goo.gl/ewmnyw
My family owns a small dairy farm in Nova Scotia Canada, this video is just one of many I have created over the last couple years depicting life on our farm. Thanks for taking the time to watch, without viewers like you none of these video's would be possible.
Do you like quad video's too? Don't forget to check out my other channel KillerATV: goo.gl/TldpJP
Follow me on Instagram: goo.gl/m9gmNU
Follow me on Twitter: goo.gl/TFeXj0
Follow me on Facebook: goo.gl/QyZ4Zd
Agco, Massey Ferguson, John Deere, New Holland, Case, International, Kubota, Tractors, Cows, Dairy, Farming, Equipment
Bottom right is depth control, bottom left is draper control, middle on the top is the dampener fit carrying weights up the road
The big nob sets the 3pt depth. You set your toggle switch to the down position and turn the nob to the height you want. Then use the toggle switch to put it up and down and it will only go down to were you set it.
Perfect. Thanks bud, makes sense.
I have a massey ferguson 3050 with the same controles. The big left nob is for the auto depth control. The right big nob is for de manual depth control so to say. And the little nob controls the swiftness of the auto depth control thats for work such as plowing, when you set it on the little waves then is the correction Quick. When it is on the longer waves than is the correction slower for a smoofer resolt. When the tractor auto corrects you see that also in th two up and down Lights.
Nice review thanks for that, it is pretty silent inside, at first I thought the engine is not running.
+Jan Kotze haha I must confess I turned down the background noise in my editing software so you could hear me talking better. It cuts out a lot of the engine noise. These cabs are very quiet though.
OK, never mind it stays a nice review!!
Hello Sir. I have a Massey 3060 with the same controls. I do have a pdf document in english that could be useful regarding the control panel. Basically the middle top knob is your draft control. The lower left one is to choose wether you have implements working above or below ground level, and the big one on the lower right sets your depth. If turned past 8 it will make the implement float. let me know if you want the pdf, and I'll mail it to you.
+Norseman220 thanks. I found the owners manual for the tractor that was actually quite helpful. Feel free to email me that pdf though. Mac102004farms@gmail.com thanks
What I have is a scanned user/owners manual, so I think it contains the same info you already have. Nice to see that you use a Kverneland plough. Norwegian product. I live in Norway myself.
Best ploughs made. Can't go wrong there. No surprise your from Norway, your username gave it away. haha Thanks.
+Norseman220, i have just bought mf3060 and am not sure how to used all of the controls, would it be possible to have the pdf document you have mentioned? Greetings from croatia
hi I have a 3070 massey ferguson tractor . can you please email the PDF documents to rabadimaan@yahoo.com would truly appreciate your help.Thanks
Soon as I seen shout out I was like that better be for me lol thanks man !
haha it was a long time coming. Just had to wait for it to come to mind when making a video
I have a Massey Ferguson 3650, but unfortunately the computer is not working. Can I convert it to manual?
If it's anything like the 3050 there are two electronically controlled hydraulic valves under the tractor. We had the same issue with the computer and I ended up wiring the valves to a separate toggle switch just to get it working.
nice review thanks unfortunately mine 3120 is stuck in low ,any ideas please ?
Whenever we ran into that it ended up being the computer needing replacing. But it could just be a wiring issue.
I have tie rods locked the control panel works and tie rods work but after a period of inactivity it doesn't pick up what it has
pls help
how much horsepower is the massey ferguson 3060?
Just under 70 PTO hp I think
I have a 3120 best tractor ever, great for ploughing and carting sugar beat or wheat
+TiddleVlogs 3120’s are nice, don’t see them come up for sale often around here
Mac Farms yeah shes a rear gem
Hello. I need your help on the 3060 tractor gear repair, please reply to me quickly
I have a 3070 best tractor ever
3060 is the best
3075 is the best 😉
3070’s are the way to go!
I just bought a 3070 it seems to be ok . I hope it does me good.
Well I had my 3070 10 months. It's a solid made tractor. It has the weight to handle situations a lot better then my John Deere 5320 cab loader tractor 2 wheel drive 18.4x28 rears. My MF 3070 also is a 2 wheel drive 18.4x34 rears tractor with a loader. Both tractors with fluid in the rear tires. The Massey will out weigh the Deere by at least 2,000 lbs and the Massey with much larger rear wheel and tires can pull itself out of a hang up situation much better then the Deere and can handle the round bales of hay on the front loader much better then the Deere in the mud. I really like the bigger tractor ride better also.
How activeited 4x4?
One of the green buttons on that same console as the 3pt, one is going to be your 4x4 the other is for the speed shift
@@macfarms at the gear lever is the phase with the frog and the rabbit and I don't really know how to change them between them please answer
@@danut1223 just bump the shifter to that side it will shift between rabbit and turtle
@@macfarms I tried several times in the end I managed to hook the rabbit but it has something to do with the clutch when I change?
Have to be stopped to change I don’t think clutch has to be pressed. If it works sometimes then maybe switch or wiring is bad, usually if it doesn’t work at all it’s the computer that’s bad.
Ihave the massey ferguson 3090
3090's are a good tractor as well. 6 cylinder.
Mac102004 Farms yes the 3090 have a good motor
Mac102004 Farms It has a worries these the gearbox
The 32 speed people have had problems with, you just have to be careful with it. 16 speed were strong.
@@macfarms yes the 16 speed is better and my tractor have a datatronic this is very good