VACUUM CLEANER MOTOR ??? DO NOT THROW AWAY YOUR OLD and DAMAGED VACUUM CLEANER MOTOR
HTML-код
- Опубликовано: 19 мар 2020
- For more DIY Videos press the link ..
• SIMPLE HOMEMADE ELECTR...
And here ....
• MAKE A USEFUL DIY TOOL...
Homemade belt sander using old and damaged Vacuum Cleaner Motor,old bike part and battery angle grinder
DIY Belt Sander
DIY machine for sharpening knife
by Mr.DK DIY
SUBSCRIBE LIKE AND SHARE !!!!
My FB Mr. DK DIY page: / youtubecrator
My Twitter page : / dejan_bmb
My Instagram : / mr.dkdiy
All of my DIY videos I have done for experiment and my challenge, if you make these videos at home and something happens to you I will not be responsible for anything !!!
Welcome to Mr. DK DIY channel
My channel include of guiding videos:
-DIY
-How to make
-Awesome ideas
-Tips....
#mrdkdiy #vaccumcleanermotor #diybeltsander Хобби
Wouldn’t just using two bicycle wheel hubs have been more efficient?
I sat through this torture imagining that he is going to make something interesting. Heck, he does a sander. Why would someone need an armature for that?
Spoke facts to a whole new level
While I admire your industrial arts skills, I can't believe you threw away most of a working motor to make a pulley bracket out of it. It reminds me of nuclear energy - the most expensive way imaginable to boil water. Of course, you could have figured a way to do it with Legos and an old tin can. That would have been more economical.
Can you make a High Speed Hand dryer using a Vacuum cleaner motor, Metal cover, Heating element, and a Sensor? that would be loud and cool
I'm just happy I saw the inside of a vaccum motor.
😏😏... judging from that giant ass industrial metal lathe you have... something tells me you didn't NEED to build a belt sander....can anyone say..."look at me, I have a shit load of tools and time on my hands and I'm bored outta my mind"..😂😂😂😂😂😂😂😂
❄U just got Freezed!❄😯
These can be found pretty fuckin cheap my man, that "industrial metal lathe" is a pretty antiquated piece of hardware that's probably been given a hot dinner for years and years. These things are built to last for general use but in industrial settings they are stuck abiding by tolerances a home-shop probably wouldn't even notice. Once they reach that point business tend to sell em off, you can get them at hardware auctions for dirt money.
Used engine lathes like the one he's got with a small bed can be bought generally under 2k, if you even mildly make cash on the side for a hobby being able to turn metal will pay for it in no time.
Dude this was epic and everything. It's really clever and you've done an awesome job but all this video made me want to do is throw my old hoover away.
That moment when you measure by hand and use precision lathe for the cut, great 😀
Thanks for NICE comment bro ... coffe when ??
@@MrDKDIY As soon as the people return to normal I guess 😀
have seen videos on how to make a sander that were quicker and less complicated
Y para cambiar la luja hay que soltarle del bastidor?valido para muy poquitas cosas
It was nice to watch...I enjoy the music no talking with the visual step by steps. Thank you for your skillful work.
"Too much time on my... tss tss tss tss tss tss... Hands..." lol.
More good stuff.
Good job brother soon i Will make the similar belt sander.
Wonder if a vacuum motor is strong enough to put on a bike to make your regular bike into a E-bike
I’m wondering the same thing, I pulled a 1900w motor out of an old vacuum cleaner and my plan is to use it on a go kart, my only concern is torque, since I’m sure it spins fast enough, but I might be able to use a gearbox to make up for the lack of torque, if any.
I love the idea and the video. I hated the fact that this video had 7 commercial breaks way tooo many. I think!
Even more now
Great job
Grinder motor that burnt from using it not intended for ?? Do not throw away your old and damaged grinder motor and broke the next appliance
I brought a new vacuum cleaner but I found it’s too loud. It is 850W. My old one is 400W but it’s adequate for me. Is that possible to change to a less powerful engine or anything to reduce the noise?
Why not just use another bike sprocket with the axle still on it instead of the vacuum motor? It would be a lot easier to make l would think.
using 2 bicycle hubs would have been much easier an cleaner construction .. but cool video never took a vacuum apart to see the motor an inducer impeller thing that makes the ''vacuum''
Ok a lot of time wasted watching this why not buy a sanding wheel for the grinder ?
I was thinking you where gonna make a bike with a vacuum motor mounted
Hahah no bro
Me too🤦🏽♂️.. but I stayed anyway..🤣
Hi, thanks for your excellent video!
I want to ask one problem I am facing with my vacuum cleaner (model: Eureka Forbes Trendy Steel Vacuum Cleaner). One day the zip of the dust bag was open and I used the vacuum cleaner in a dusty area and I immediately smelled something wrong. So, I switched off the machine immediately. Then after some days in opened and cleaned the motor of the vacuum cleaner and cleaned all dust and debris. There was no smell of coil getting burnt. I dropped few drops of machine oil on both the bearings. After starting, I could see lots of sparks near the bushes and different smell coming from the machine.
Kindly, suggest the probable problem and its solution.
Thanks
Sturdy lathe!
I have question that.. What motor that the vacuum used?? DC or AC.. im soo confused can anyone helped me out?? 😅
This guy in the video is incredible! Way to go man. I like this video
From old motor to nice bearing
cool video you deserve more views
I'm fucken dying right now, i thought this guy was gonna throw a capacitor on a bike with that motor but noooo, he made a fucken belt sander LMAOO!
Why use an armature of a vacuum motor?
GIVE UP THE WELDING! Not much any good about the rest. Watched till I guessed what you were doing. Don't stand very close when it's running.
Crazy, the guy must have had a belt sander already coz he had the belt. What? He went out and bought it? A grinding wheel might have been better, longer lasting & easier to build (sanding attachment for drill available in shops.)
Yeah this is trash... didn't even need the motor........
What is this use motor for spin not for power?
Anyone want the motor to my really old clamshell canister Hoover? It's powerful motor locked into a really sorry canister design. I was thinking maybe someone could mount it into a blown shopvac or something. A sander. huh.
vejam so o comprimento de parafusos que ele usou para segurar as partes do motor .por favor stop de mostra coisas sem entereco e faz coisa de jeito nao e esse disparate sem prestar,brinquedo de criancas
What if I reverse the terminals of the motor ?
Spins the other way
on en reviens toujours a la même chose ! ponceuse et encore ponceuse
I believe I will throw mine in the bin
Il faut mettre une table dessous la bande de ponçage !
Instead of that motor would have used 1 more cycle hub for that end
Silly me. What was I thinking throwing away my damaged motor.
Here let me throw the motor housing on my manual lathe.
Well you can throw away your grinder now
Only I see the steampunk rabbit on preview ?
I thought it was gonna be a mini lathe
Washing machine ki motor se bana ke dakho bhai vaccum cleaner
bad attempt at a belt sander yo could have used 2 of those wheel spindles and some metal work. bad use of a vacuum cleaner motor
My cordless grinder is more useful as a grinder
Плечевая нагрузка в болгарке. ресурс маловатый
That result was a bit underwhelming. Why not just use anything that can turn on a rod ?? This 'gadget' seems completely unreasonable considering the work, and the materials.
I thought this would be some practical application that most anyone could do until he hooked it up to a lathe. Not so many people have a lathe in their garage.
Со станком и дурак сделает. Ты попробуй на коленках
what a waist of parts ! could have made that belt sander out of much less parts an time !
2 bicycle nav
Hát ez csak egy tákolmány...
.
Just buy a belt sander....what is wrong with you! Or better yet...use 10'000 rom vacuum cleaner motor...mount a 10 inch circular saw blade. And handle to it and have a hedge trimmer...
About 20 yrs ago in the town just 4 miles from me did it...worked great...till it snapped blade in 2
And disembowel him.....that sucked
???
That was 15 min wasted
Mi
Lets break up the angle grinder
Too much work and effort, too little and complicated result. Sharpen knives on a fine grade sharpening stone. Complete waste of time, sanders of this quality are cheap enough and readily off the shelf. Guaranteed too!
Глупость
So what’s the point of using a vacuum cleaner engine when it is being run my a angle grinder. This video is nothing but a big waist of time.
Well Golly Gee! What a waist of time!!
I really hate sound tracks! I think it’s so stupid and annoying who listen to those kinda annoying music while you watch someone wanna learn something new
Really guy? Is your time worth anything to you?
What a complete waste of time!!!!
and I wasted a bunch of time watching the beginning of this, glad I stopped and read the blogs,
waste of my time to watch