yes, a little raise is needed. The second rail is slightly off the base and needs support. now it didn't hurt, because those planks go separately to the planer
thank you. the saw is a Jonsered 2171 and the cubic capacity is 71CC. The sawmill was purchased from the uittokalusto.fi online store. find your local Norwood dealer at norwoodsawmills.com the blade chain is a special blade intended for splitting. you can find these types of blades in stores that sell well-equipped saws.
Pra ser perfeito, precisa saber dividir a peça, tirou uma casca muito grossa de um lado e bem fina do outro, com isso o corte ficou meio que de diagonal.
Hello. I bought the saw from the Uittokalusto online store. The sawmill paid 1,400 euros. I built the rails myself. I had the chainsaw ready. If you buy this package now, depending on the chainsaw, the total price is around 3000-4500 euros.
I would like to ask you about the dimensions of the rails. What are the dimensions and thickness of the profile? It is U profile, right. And is that okay? Without twisting?
U-Profile steel S235J2C+N 40X80X40X3MM 6000MM Yes this material has been suitable for this purpose. It is recommended to put a cross bar in between the profile to support it, so you get a stiffer structure. I don't have cross iron for support and the rails can wobble a bit, and that's not good.
Thank you for answer. I would like to use the rails elsewhere than at home, I'm thinking about a lighter version. What do you think about U-profile aluminium 40x80x40x4mm with cross bar. Will it be enough?
I believe that the aluminum structure will last well. Norwood advertises that normal aluminum ladders can be used as rails and they are much weaker than the U profile you mentioned.
a list of dealers can be found on the manufacturer's website www.norwoodsawmills.com/fi_fi/?GA_adgroup=112164103845&GA_campaign=11713486031&GA_creative=482478894708&GA_device=m&GA_extension=&GA_keyword=lumberman%20mn26&GA_landingpage=https%3A%2F%2Fget.norwoodsawmills.com%2Ffinland-quote%2F&GA_loc_physical_ms=1005600&GA_network=g&GA_placement=&GA_target=&gclid=Cj0KCQiAjbagBhD3ARIsANRrqEu-8LOH0B0Qd4xpzIFLudSxKzcRAAPZ_0EXzFL9XtO-jOQmoEx19JwaAhWKEALw_wcB&BN%5D%20%5BFinland%5D%20%5BSearch%5D%20%5BPurchase%5D%20%5BGoogle%5D&
good morning. I couldn't translate your language and I don't quite understand your question. more information about the sawmill can be found on the manufacturer's website www.norwoodsawmills.com
You can inquire about the price on the NorWood.com website. there you can see the price for some countries. I have no information other than prices and availability in Finland. I do not represent the NorWood company, but I am their customer / consumer
You can inquire about the price on the NorWood.com website. there you can see the price for some countries. I have no information other than prices and availability in Finland. I do not represent the NorWood company, but I am their customer / consumer
Très bien fait et sécuritaires, ça me donne envie de m en procurer une
Thanks
Tks for sharing, 'tis a lot of work, lots of dust and 2 stroke smoke. My asthma and doing that just don't go together:)
Yes, this one is laborious, but larger timber is also valuable. There will be dust and smoke from this.
Классная пилорама для домашнего использования. Благодарю что поделился видео роликом.
Thanks
Nicely done. Enjoyed a full-watch. Have a fine week. 👍🏽🤠 3/20/23
Thanks nice to hear 😃
Great little machine. Looks like you may need a level and some shims to keep your two ends level.
yes, a little raise is needed. The second rail is slightly off the base and needs support. now it didn't hurt, because those planks go separately to the planer
@@klapisika914v
Привет! Отличный аппарат для домашнего использования!👍
Thanks 😉
Nice real time video, what is the. CC of the saw. Where did you buy the mill? And what type of chain? Great job!!! Thanks. Steve
thank you. the saw is a Jonsered 2171 and the cubic capacity is 71CC. The sawmill was purchased from the uittokalusto.fi online store. find your local Norwood dealer at norwoodsawmills.com
the blade chain is a special blade intended for splitting.
you can find these types of blades in stores that sell well-equipped saws.
, thanks for sharing, you did not let us see how you fix the machine, you think it is possible to fix a Dolmar machine?
The chainsaw looks like a Dolmar brand, but is Jonsered. This spring, I will make a video going through the adjustments of the machine.
Terveytta! 💪👍
👍
Muito inteligente, parabéns vc que construiu????parabéns
This facility is not built by me. The manufacturer of the device is Norwood.
Pra ser perfeito, precisa saber dividir a peça, tirou uma casca muito grossa de um lado e bem fina do outro, com isso o corte ficou meio que de diagonal.
Exactly. The tree support should be adjustable. This would enable direct sawing and the best end result.
Hallo wo hast du gekauft oder hast du selber gemacht stamm durch zu schneiden was kosten das alles zusammen. Liebe Grüße aus Deutschland
Hello. I bought the saw from the Uittokalusto online store. The sawmill paid 1,400 euros. I built the rails myself. I had the chainsaw ready. If you buy this package now, depending on the chainsaw, the total price is around 3000-4500 euros.
I would like to ask you about the dimensions of the rails. What are the dimensions and thickness of the profile? It is U profile, right. And is that okay? Without twisting?
U-Profile steel S235J2C+N 40X80X40X3MM 6000MM
Yes this material has been suitable for this purpose. It is recommended to put a cross bar in between the profile to support it, so you get a stiffer structure. I don't have cross iron for support and the rails can wobble a bit, and that's not good.
Thank you for answer. I would like to use the rails elsewhere than at home, I'm thinking about a lighter version. What do you think about U-profile aluminium 40x80x40x4mm with cross bar. Will it be enough?
I believe that the aluminum structure will last well. Norwood advertises that normal aluminum ladders can be used as rails and they are much weaker than the U profile you mentioned.
@@klapisika914для подъёма/опускания пилы - можно использовать дрель или Импакт
Please show us how you modified it and cut
in the next few weeks I will be sawing boards again and at the same time I will shoot a video of the saw
Saludos desde dominica cuántas tablas puedes hacer por día
I can't say. this is mainly a hobby and the boards come for your own use. I don't make boards for sale.
Saludos desde Costa Rico, cual es el precio de ese equipo
I can't say how much this costs in Costa Rica. In Finland, the price is €1,290 without chain saw and saw rails.
C est papire le vidéo combien ça coûte ça pas de scie
The price in Finland without saw and ladders is 1250€
Nice 😎
Thanks
Onde comprar esse equipamento?
a list of dealers can be found on the manufacturer's website
www.norwoodsawmills.com/fi_fi/?GA_adgroup=112164103845&GA_campaign=11713486031&GA_creative=482478894708&GA_device=m&GA_extension=&GA_keyword=lumberman%20mn26&GA_landingpage=https%3A%2F%2Fget.norwoodsawmills.com%2Ffinland-quote%2F&GA_loc_physical_ms=1005600&GA_network=g&GA_placement=&GA_target=&gclid=Cj0KCQiAjbagBhD3ARIsANRrqEu-8LOH0B0Qd4xpzIFLudSxKzcRAAPZ_0EXzFL9XtO-jOQmoEx19JwaAhWKEALw_wcB&BN%5D%20%5BFinland%5D%20%5BSearch%5D%20%5BPurchase%5D%20%5BGoogle%5D&
Q.acessorio top gostaria de saber a onde encontrar
Norwood Website local dealer 👍
Opa
🤔
Mình đang cần mua 1 cái như vậy về cưa gỗ của nhà
yes this is a good buy
I am sri lanka
Ok
Bom dia Como concequi um suporte desses
good morning. I couldn't translate your language and I don't quite understand your question. more information about the sawmill can be found on the manufacturer's website www.norwoodsawmills.com
Cuanto cuesta aquí en el Perú
You can inquire about the price on the NorWood.com website. there you can see the price for some countries. I have no information other than prices and availability in Finland. I do not represent the NorWood company, but I am their customer / consumer
How much this mill
The price is around 1400 euros without the chainsaw.
Ide yang cemerlang
thanks
How much thi😢mashine sold for TSH?
3:41 cuanto cuesta aquí en el peru
You can inquire about the price on the NorWood.com website. there you can see the price for some countries. I have no information other than prices and availability in Finland. I do not represent the NorWood company, but I am their customer / consumer
Kitane ka he masin
Now I didn't get the question translated correctly. I think you meant to ask about the price of the saw. it is about 1400$
อยากได้แบบจังคับ
Yes it is
stonise
🤷🏻♂️