How to assemble Tecline Comfort Harness? Step-by-step guide
HTML-код
- Опубликовано: 19 окт 2024
- ℹ️ Tecline Comfort Harness is a perfect solution for scuba divers who like to instantly adjust their BCD.
"One-size-fits-all" - our harness is an excellent tool for diving instructors and dive centres. Using this solution one size BCD can be used by any diver.
⚠️ Important note:
The full range of adjustment can be modified by changing the length of loose straps.
If you find that the waist strap and/or crotch strap have too long loose ends please follow the procedure:
1️⃣ Install your pre-adjusted backplate and comfort harness to your diving gear.
2️⃣ Double-check if all the components were installed properly
3️⃣ Perform a check-dive to verify the lengths of all straps.
4️⃣ Re-adjust the length of waist strap / shoulder straps / crotch strap if needed.
5️⃣ Cut the excess length of all straps and carefully burn the jagged ends with a lighter.
In case you have any doubts or questions - please contact your Local Tecline Dealer: teclinediving....
But still exist an adjustable DIR harness ? how to set it up ? it would be nice to view some tutorial.
Czy nie dałoby się jakoś zastosować po jednej taśmie dla każdego ramiona zamiast dwóch, ale żeby zachować możliwość regulacji? pozdrawiam serdecznie
How about a video showing how to thread the comfort webbing for ladies edition? The ladies edition does not comes with a one piece, long shoulder webbing as shown in the video here. I have just bought the ladies comfort kit (T15060-2) to upgrade my wife’s Peanut 21, but I’m astonished to see how different is the shoulder webbing in comparing with the standard one, and I couldn’t move on.
Caesar, here is the video: ruclips.net/video/zZ-3gHqWV-g/видео.html
We hope you eventually did manage to assemble the lady harness?
D ring seems to be located quite low compared with DIR setup? Why?
The upper D ring can be actually located also higher if needed. It is a matter of personal choice.