Have Line 6 REALLY improved the POD with the GO? | comparing all generations of POD products
HTML-код
- Опубликовано: 28 июл 2024
- So now that the Line 6 Pod Go is out, it seems a fitting question. How much have they really improved the pod line over all 4 generations of POD products? In this video, I'm going to talk about the history, playthrough a unit from each generation, and OF COURSE there is a shootout at the end!
0:00 Introduction
1:05 Pod History
8:54 POD 2.0
13:43 POD X3 PRO
16:59 POD HD PRO
21:44 POD GO
24:23 SHOOTOUT TIME!
27:22 Final Thoughtz
Stuff I use or have demoed, if you purchase from these links it helps the channel!
picks - amzn.to/2ZWGbzj
strings - amzn.to/3iMj2qR
Modelers:
ge150 - amzn.to/2FTVJgn
GP100 - amzn.to/3iS2kXb
ge200 - amzn.to/33L1XHG
POD GO - amzn.to/3j4KFM9
HX STOMP - amzn.to/2ZZz09H
🙌Support via Patreon!🙌 - / taylordanley
😈DISCORD!😈 - / discord
🤘Sacrificer (my band) merch!🤘 - sacrificer.bigcartel.com
SPECIAL THANKS TO THE PATRONS!
Barry Prosser
David L
Kevin Puumala
Ronny Webster
Apoplexia
Here's the link to download patches and IR's associated with my videos!
www.dropbox.com/sh/i2f8i20n3i...
Thank you so much for checking out my videos. Follow me on Social Media!
Facebook:
/ doubleddose
/ cellarwitch-2410072533...
/ sacrificerofficial
Instagram:
/ taylordanley
/ sacrificerpdx
/ sacrificerofficial
Instagram:
/ taylordanley
/ sacrificerpdx
#Line6 #POD #PODGO 
Хобби
Which was your preferred POD? Have you owned any? Let me know below!! 👇
Owned a POD X3 and a VOX Tonelab SE. Not nice. Now I own a MOOER GE-150. Not Nice. Shyte!
@@InTheSh8 cab sim off, and a good cab? How complicated are your signal chains? I do not have a mooer modeler besides a preamp pedal. It sounds good but i prefer my tone on the pod hd500x vs my mooer prwamp pedal (the brown sound 3(5153). I'm using the fx return of a joyo zombie to power them. I'm boosting them with a precision drive.
@@AaronMorgan666 With the Mooer Flux150G Extended I tried to put several of my favorite IRs, but still SHYTE! Good that I didn't buy it and just swapped it against a preamp that I didn't like either. I don't like complex chains. Right now I use an AMT K2 pedal boosted with a Behringer TO800 into audio interface and NadIR. That Mojer GFlux15 "lives" somewhere in a filthy corner of my house, haha! Really, it's shyte, sounds like an amp with a wah, every preset.
@@InTheSh8 I'd get a new boost if you can. Doesn't have to be the precision drive but maybe the earthquake devices plumes or the joyo overdrive. I've been debating on replacing my precision drive with either an airis effects boost or the plumes. The plumes is only $100 but the airis effects boosts are like $220 and higher
@@InTheSh8 also. I learned that when I was boosting my mooer "5153" pedal that if I backed the mids to around 12 or 1 o'clock it didn't sound weird. I guess like a cocked wah.
I really hope you blow up soon dude. Your content is so well made and you deserve so much more recognition for the obvious effort you put into this. Just keep goin my dude! You’ll have my support along the way
Thank you! I try to make the videos a little bit better each time. I appreciate the support 🙌
Agreed
This was easily one of the most informative videos I've watched on RUclips. Really appreciate your research, presentation and the work you put into it. Thank you!
POD HD for me. The dual amps i can create are amazing. Sounds better than the POD go to me. Great Video!
Great job on this video. Probably the best comparison video I've seen on RUclips. I've owned POD products for years and you're exactly right. The stock IRs is what hurt them until recently. I always ended up using the POD or PODHD into an amp and cabinet using the FX return and used the POD for a pre-amp and effects. I run it through a pair of Marshalls and delay one side 20ms. It's a very nice stereo effect.
Wow! Great demo!!! That was awesome to hear all those products. The Custom IR is the way to go for sure. Rock on!
🤘🤘
It feels so good to see how far the technology has evolved. Great demo!❤️
🤘thanks!🙌
Nice video! I was just digging through my buddies garage and found a pod HD pro sitting there, I consider hooking it up just to see what tones were in there. My friend insisted that there were no good tones in that thing, I will have to show him this video, thanks for the shootout!
You can get really good tones out of it! Just have to know how to work it... also if you aren't going into a real cab, get a mooer radar or something and run it through the FX loop.
Aloud me to aplaude you, this is very interesting and entertaining content man. I guess you can fill in the void on the market.
Much appreciated!
This is the exact video i was looking for. Excellent 👍. Thank you
some Funeral for a Friend-ish Riffs there! 😊
Congrats on the 5k mark! Keep it up! 😊
🙌
2023 and i am about to buy one of them, best video i've seen, most helping. Thanks for the good job!
My first modeler was the pod 2.0 and just got the pod go.
The sound quality is so improved in the pod go over the 2.0 .
I was amazed at the sound of the 2.0 with the third party ir.
Sounded killer to me.
A really well-made video! Really enjoyed it!
I got a POD X3 Live a few years back for not much money, and have loved it ever since! I got mine mainly because it's great for the early Tesseract and Monuments tones, but it does so many other things great as well. It's really versatile for both live and especially the studio, and is much more flexible than the HD series IMHO.
And with a good IR, I think it can still hold its own today!
For whatever reason and to my personal taste the best IR sounds in this video are those of the X3. I'm probably buying one.
OK, years later to respond, but yeah, I still have an X3 Live and I still 'X3 Love' it.
Awesome demo! Love your riffs man
🙌🤘🤘
Love this review! I'm still on X3 Pro, still happy with it but the one thing that would entice me to upgrade is sonic quality. It's a bit difficult for me to hear the differences until toward the end when he strings them up one after another...WOW! Now I'm contemplating moving to their latest generation. Just keep in mind this is testing the sound for only one genre of music. One of the things I love about all of the PODs is the versatility. In a set I have to go from full-out heavy to a ballad and many tones in between and the POD X3 does it for me superbly. I spent quite a bit of time programming and dialing in all the tones I needed but after that, smooth sailing!
so sick! im buying the pod x3 pro soon and i really loved that dual rectifier tone
nice video, my favorite in the shoot out is the x3 and the 2.0 while mixed with drums and bass.
Man excellent video! Your riffs are brutal!!!
I’ve been waiting for this video!
i remember when this channel started.....glad to see its growing.... nice vid chap
Thanks!
That Line6 history bit was really interesting! I had an XT live and an HD500 after, sold them both when I stopped gigging. I still have the bean XT, and still like some of the tones from it. I know a couple of pro guys over here who preferred the XT over HD for live. Congrats on 5k! :)
Thanks!! 🙌
I use pod xt + fcb1010 for live, Nice combination and no latency between patch changes!
First time I see a youtube review where the reviewer knows and really appreciates the awesome original Line 6 models!
Dude, I just found your channel and MY GOD! You are a MONSTER! So metal. 🤘🏾🤘🏾🤘🏾
🤘🤘
Wow! This is a fantastic explanation of Line 6 origins and background info. Most Excellent! I got Pod Go a while back and (like you) have a number of previous Line 6 hardware items (GuitarPort, TonePort UX2, TonePort UX10, Spider IV 150 w/ (upgraded Eminence 2X12" speakers). So far, I've been really impressed w/ Pod Go. I don't necessarily love EVERYTHING about it (footpedal could be better) - but it's mostly GREAT otherwise! Seems to deliver a wide variety of tones and textures for ALL types of music! Always loved this company and happy to see they've still got (at least) most of their MOJO from the last 2 decades of cutting-edge audio technology.
Great historic video. Don't miss at 24:23. It's funny because i don't listen to this kind of music but for my taste the POD 2.0 with custom IR was my favorite. Fat sound with smooth top end. I knew it but now i know it better : IR impulse are SO important. Thanks man
This is a great informative and cool video. (Grindage, LOL!) X3 and HD Pro are kool but I really do like the gigging capable layout of the Pod Go as it's really an all in one ready to (PodGo) unit. I'm ready to pull the trigger on one of these. Coming from an old broken Boss GT6 (yes 6!) This will be my 1st Pod product. It seems to have everything I need (except the dual amp capability.) it should be quite an ear popping experience. IR comparison at the end was awesome!
Thank you so much! 🙌
Really enjoyed this vid man 🤘🤘
🙌🙌🙌
Dude you are over 5k!! Congrats dude.
Thanks!!
Sick! Great content 👌 my buddy sent me this link, watched and had to subscribe 🤘. I started out with a 75 watt line 6 spider 🕷. Lets say I Had a love hate relationship with it .... loved all the options, but hated how the amp sounded like it's stuffed under 50 blankets 😑. I ended up selling it a year later for 300 bucks and bought a peavey valve king . Started my love for tube amps. Anyhow, it's been 15 years or so and I just got turned onto the pod go ! Doood! Insanely happy with it for a on the run rig. Has some glitches but I'm more than happy with it.
Growing up, my first and only amp was a Line 6 Flextone II...essentially the POD 2.0 tech in an amp body. I owe the versatility and variety of sounds on that thing to a lot of my early excitement for the guitar. Fast forward 12 years, and after messing with “real” amps for a short time, I’ve got the POD Go and honestly, am pretty happy with that as my main rig
I own an XT Live, HD500 and I actually prefer the tones on the XT Live a little more. When you were doing the demo at the end, I think some of the stock IR's sounded better than the custom ones....but it might be just my 57 yar old ears. Great video
I bought one of the last X3Pro's when the HDPro had already come out. I still use it, but about two years ago I put a Mooer Cab X2 - IR-Loader into the FX-Loop of the X3Pro. I don't use any other effects in the loop, so I can program to either use the built in IRs, which I do for clean tones or, for my heavy distorted tones I run through some "Mesa Oversized V30" IRs. As the Mooer Cab X2 is stereo/2-channel, I put one center-cone mic'd and one edge mic'd IR in the two channels. So when I send the two main XLR outs of the X3Pro directly to FOH, the sound guy can mix the two channels as needed, similar to moving the mic in front of the cab.
I also have a 200W mono class-D Amp in the back of my rack to drive a 4x12 cab, which gets a mix of the two channels.
And yes, I compared with and without the IR-loader into the class-D and the 4x12, and I prefer it with the IRs.
Great demo.
The POD Go sounds much much better to me. I had one of the POD red rack effects. I just used it to practice and I don't remember what amps I used. Believe it or not digi tech I thought back in the day had the best modeler at the time. Today AxeFx is killer and I love it, but don't own it. Kemper too, but I am playing thru a Katana mk2 and love it with the fine studio once I adjusted parametric eq and got rid of the 800mhz and 8kz and I changed the air, etc. It rocks and has all the sounds I need and I change everything with a foot switch. Great review sir.
Dig that Ibanez S series. I have an old SV that I holoflashed that is killer!.
I need a good harmonizer to get that Sfeve Vai crossroads lead tone now!!!
🙌
Big fan of ur channel been scrolling and watching everything
Really well done.
Thanx, I love it. I had just the POD HD PRO and 500... just fur fun I stil keep my amplifi 75 and I love it... :) but I have toured with POD HD pro straight to the mixer... but stereo paned amps.... that was cool. right side 20ml seconds delay...
Soubds huge that way
Thanks a lot man, very helpful.
Still use my HD Pro every day, most of the time with 3rd party IRs though and it's brought it along modern sound quality nicely.
🤘
did anyone else get blown away at how good the pod HD Pro sounds? like it kinda sounds better than the helix at some models.
HD is darker, GO is brighter. Both need to be tweaked with EQ.
I have Helix Native, Pod Go, Spider V 240HC (overall get around and most user features favorite) and an Amplifi 150 which I still think sounds great because of it's stereo Hi Mid coaxial squeakers and it's common 12" Celestion woofer gives it like a custom IR sound. 🤘
FINALLY! I am considering changing the POD XT after 20 years...but not sure if the extra money is worth it. Thanks for the video.
🙌
If Line6 opened the POD HD line for custom IR's, the Helix line would never have moved off the shelf! This was an awesome demo and will be pairing some IR's with my POD HD 500 to see what it sounds like
Cool, good luck 🤘
Fantastic video! I seriously think the X3 Live is the best when using a custom IR. All the other units, even the pod GO, sounded plastic and cardboardy in comparison.
Think I'll get a cheap X3 to replace my Korg AX3000G instead of a hd500x.
Thanks for the lesson! 😆
🙌
Excellent comparison and indeed, the biggest problem with the Line 6 products are the included IR/cabs. I also think the overdrive and distortion pedals are a bit meh...
A year ago I bought the Mooer Radar pedal and I run it with my Pod HD500 in the FX Loop. Loaded with the Bogren or Mendel IR it sounds really good.
You can get a used HD500 for a really good price and if you load it with a IR pedal/loader you’ve a solid piece of gear for gigs or recording.
The Gain Boost on the 2.0 doesn't really act like a pedal. It just adds more distortion. Add a proper Tube Screamer to the chain and the POD 2.0 metal tones start to come alive. Especially if you can find the old Deftones and Fear Factory patches.
Great overview. I sometimes feel bad for Spider owners who are constantly being told that their amp is crap. If you're using it as a practice bedroom amp, who cares? But I've seen people gig with them, and well, they're terrible at high volumes. I did a video where I put a Floor Pod Go through an IR file in the HX Stomp (and nothing else) and it made the Floor Pod sound pretty good! So old Pod plus new IR = not bad, but you're better off getting the Pod Go IMHO.
IRs always held back Line 6 modelers. A lot of people still don't seem to realize how much a half decent IR can improve your tone. I used to run my desktop Pod HD thru a Panama 2x12 and it sounded amazing. On the HX Stomp now and Line 6 really started listening
Been seeing a lot of pod 2.0 for sale lately, and now I know why, lol. Sounds like there's a blanket over the speakers. The HD sounded the best to me. I've been using modelers for over 20 years from Zoom to Digitech to Vox to line 6. Thinking of getting a HeadRush next 😊
Wow man I’m impressed! Been a fan of your vids for awhile and so far this is the most informative one yet, good work!
P.S. It might be heresy but I thought the older pods with custom IRs actually fit better in the mix than the pod go (idk why but to my ear it has this boxy characteristic)
Thanks! 🙌
Agreed. The bean punched above it's weight with the custom IR!
I’ve been using my pod pro rack unit using the modern high gain. I believe it’s based on a soldano. I still love that thing. It’s pure nostalgia lol… as a pod owner of the 2.0 bean pod pro rack, xt bean, xt live and pod go owner. I’m in with the bricks lol
POD XT: big bottom amp was the amp both Tesseract and Periphery used at the time of their inception. Monuments aswell
I 100% believe it. Great amp.
I never owned a pod, but I feel like from having a Spider IV 75 watt amp, I assumed Line 6 was quantity over quality until I started seeing the Helix products come out. The POD range was definitely a pretty revolutionary step in modeling and the PODgo is a device that I honestly want to get my hands on. The Achilles heel is definitely the cab emulation, as you've said, but with the third party IRs, the sound of these units really comes to life. I was honestly pretty surprised at how much better even the pod 2.0 sounded with custom IRs.
Significantly, right? I was pretty surprised at how it sounded when I got it (the 2.0), I don't remember them sounding good, but there are a few good amps in there!
@@TaylorDanley I've noticed this a lot with gear and even other subjects, gaming. I've noticed that quite a few people see the big name RUclips channels express a view on a topic and rather than formulate their own opinion, they echo the sentiment of the channels they watched. It's nice to see some content which eschews such bias.
Ive always thought the pods suffered from sounding dull when you played by yourself in a bedroom, which is ironically what they were marketed for. In a mix, they always sounded really good. Even your shootout at the end, thd custom ir sounds better but not by leaps and miles.
My favorite way to learn to record back in the day was with pod farm and i would dual amp and dual cabinet mix my guitars. Mixing the rectifier with the jcm 800 was my favorite tone.
You know what id love to see you.look at?
The spider V head. There aren't many videos over it
Nice video, well done! Putting aside how it feels for the person playing, I think if you made a blind comparison of all of these units with a good IR in a mix, people's preference would come down to how well it was eq'd for the mix, and not the specific generation of POD. Even though there are definitely differences in quality been each gen, I think we crossed the point where most people can hear those differences in a mix yeeeears ago. Even in this vid, though I know the GO is superior, I preferred other ones in the mix because they were just eq'd better for it. Generational improvements now matter only to the person playing, IMUO (in my useless opinion!) ;)
I agree!
Great points here.
I have The Floor Pod Plus and it is good stuff if you RUN IT THROUGH YOUR EFX LOOP and keep the amp modeling effects off ! ..if know how to tweek the effects settings just right (compressor, noise gate, chorus, delay, reverb ext.) have a good ear and a good sounding amp you can really get it sounding HUGE!!!!
How was or is the POD 2 for some clean sounds or light break up going into my amps power amp section. Thanks for the video as well.
I have been a pod user going all the way back to the original bean. I agree fully that the cab IR's is where every generation has suffered. That being said while I still use mainly IR's with my Helix i must say the stock IR's while not perfect are lightyears better than they used to be. I have a few custom patches I have made that use stock cabs and they sound great. The secret I find in using stock cabs with the Helix is really taking time to take time and really edit the cab settings. That being said while I can usually get a great tone with stock cabs it's a lot easier to just load in great 3rd party IR a get instant great tone.
Yeah, they definitely have improved. I'd still prefer 3rd party IRs that sound great rather than trying to polish a mediocre one though
I appreciate the effort I wish you could have cover more tones then just the Heavy Metal end of the POD. never the less thank you.
very awesome video!
Thank you very much!
I feel so cool when I had PODxt Live. Even though I only perform live once a year 😅 ...
Hey, those things were SUPER cool!
Same. I was actually at Guitar Center in February looking for the old POD XT LIVE, saw a Helix Floor for $900 and snagged it. Never looked back.
Time stamps! It's the little things that make videos so much more watchable!
Former POD XT Live church player here. Really loved it for what it did at the time, and I've got a POD Go on the way. Oh, and the history lesson was awesome, thanks!
@@sublyme2157 I am on that dilemma if is worth to replace the XT live for the POD Go to play at church, or maybe used them combined? What would you recommend in your experience?
@@Gabriel.Jarelys If you're using the Pod XT Live, and you like it, there's no reason to replace. However, the Pod Go is a better unit in my opinion. Good luck and God bless!
@@sublyme2157 thank you for responding to my message. Sorry if I ask more questions but if you don’t mind to share some reasons that makes the POD GO better in your experience. I like the XT alive but there are no many presets available compared to the POD GO that seems to be everywhere thanks in advance!
@@sublyme2157 thank you for responding to my message. Sorry if I ask more questions but if you don’t mind to share some reasons that makes the POD GO better in your experience. I like the XT alive but there are no many presets available compared to the POD GO that seems to be everywhere thanks in advance!
I picked up a Pod Go back in September to replace my 10-year-old Floor Pod Plus. I had generally gone ampless over the past few years, using the Floor Pod live and in the studio, after getting tired of dragging a half stack or my Evil Twin around. If I want to run FOH and a speaker cab I run the Pod Go into my Evil Twin (as a powered cab). The Pod Go gives me all the horsepower I need for shows or recording, with more amp/cab choices than I would ever need, plus I can add IR's if I need more. The biggest complaint I've heard in reviews is a lack of routing options but I don't need to run complicated signal paths. Is the Pod Go a Boogie Triple Crown? Nope. Does it offer killer tones for 1/4 of the price of a Helix or Kemper? Yep. If you like spending tons of money and spending all day programming get one of those. If you want killer tone and simplicity, get a Pod Go.
Thanks for the video and all the best from the Bay Area!
MK
love this comparisons.
i owned a hd400,500,300 and i hate them for the cabs xD
that`s the reason why start to make IRs
Is that the Seacow Cabs origin story?? 😂 legit! I knew nothing about IRs until my friend showed me how much better his POD XT/rewirez IR was than my HD pro 😂
@@TaylorDanley yeah that's the reason I had that pod hd and hate them for the cab sound, sell them and bought a xt and also hate it too because the cab sounds like cardboard, reading some things I learn about the IRs on reverb and how they works for EQs and Cabinets, and had the same thing about people saying that pod xt, x3, hd sounds better with IRs or "if you play my xt with a Mooer radar vs your helix you can't notice which one is the helix" hahaha also the helix sounds a lot better with IRs, I don't know why the people refuse to use them or prefer spend hours and hours to make the stock cab sounds good
please do try a Video of Multi-Effects units through FRFR Speakers (Headrush, etc) thanks! 😊
still using my POD XT pro, sometimes with stock IR and some others with GGD Zilla Cab! or both!
I have a pocket pod and it’s my guilty pleasure, for a small on the go practice device, it’s pretty impressive. The only sad thing is line 6 seems to be lagging in innovation, mooer and nux are giving them a run for they’re money.
I still have my pod hd pro x, I did exactly what you said, I disable cabs and use a mooer radar! I don't feel like I need to upgrade to helix with this setup considering that, yes the helix sounds better, just not 1000$ better.
That's the way to go with it!
Excellent - thanks. So, basically .. find a way to output through an apprpriate IR .. and they can all walk the walk.:)
I have a Pod X3 Live floor unit. I know its limitations, but with some tweaking and when just using it to enjoy playing - and not A/B'ing with anything .. it literally rocks.
I’ve owned the Pod X3 Live and last week got the Pod Go. I’ve also used a Flextone and Flextone 3, as well as the Podx2 and the Pod HD. I was much more of a tone snob back when I tried out the others. My first real venture into the Line6 was the Pod x3 live. It was pretty easy to navigate and for the most part made good classic rock tones. I also made acoustic presets that were nice to use. It had a microphone input and was a decent vocal processor. I enjoyed using the Dual amp simulation because it really filled out the sound. My only issue with it was this high frequency hiss I could hear. But once I was in n a mix I never noticed it. It also felt like if I were bending string the strings sounded like the wave formed were boxy somehow. I can’t really explain it other than it was boxy. If I played normal it was fine.
My Pod Go I have only had a few hours of play time with it but I already love it better than any other digital processor I’ve owned. It sounds fantastic. My only complaint is it’s a little more complicated with the learning curve. I’ve had to to watch more videos on how to use this device than I care to admit.
Thanks for the comment! I agree, the XT/X3 series did sound boxy... sort of flat, and lots of high end hiss. I think you can tame it, but it was a bit bright.
@@TaylorDanley My solution was to sell the X3 and get the Pod Go :P
BOOM! 🙌
Aliasing is what it's called
@@robertreynolds9961 I had to look this one up! You win the prize my friend! That is exactly what it is. I think of it like a box around a note and it shifts as the pitch changes, say if I were to bend a string. Its unnatural. But in a live mix it never bothered me, even some horrible home recordings I've done the aliasing never bothered me. Only when I would play by myself with nothing behind it.
When I save a factory preset into a user patch, it won't let me exit user banks/patches,
and get back to factory presets.
All of the problems I had with the original Pod are still present on the Helix. They still have that digital noise in the mids you can't dial out.
I traded my Peavey Bandit 112 for a POD GP back in 2003. Then got a PODXT, X3Live and a PODHD (which I sold cause of terrible DSP issues). Still use the X3 Live for just playing now and again, but for recording I'm using 90% free VSTs. Loved the Helix Native, but just can't justify the $500+ price tag. The POD GO is sure on my radar tho, since it's half the price of a Helix LT.
It's a really cool entry into the helix modeling if you dont need complex signal chains or the I/O
A vid on your favorite IRs would be cool
Honestly, I don't have a favorite. I usually use my own, but that's out of convenience. I've actually been looking around for a really good mesa 4x12 IR that I can refer people to, so an IR vid is probably due once I figure that out!
Great vid!, I think I like POD X3 PRO the most, I feel dirty xd
😂😂😂
Adding a third party I.r is the missing link imo. Great vid man
I’d say the Pod Go largely addresses your issues with the less than stellar Line 6 impulse responses and cab simulations, as like the Helix, one can upload third party IRs on the Pod Go.
Did you used the same settings on all amps for the comparison?
Hi Taylor,
Great video is a video that a lot of people desired so much. I used to have line 6 pod x3 live, hd500 and I used to run through these in fx return of my amps as well 4 cable method to my experience sounded very well especially hd500. Now, i have a pod Go running through a frfr speaker and can't be more happy about the sound.
Will you do the same thing with effects?
Saludos desde México!
Thanks for sharing! I could probably make an entire video on just delay, since there are so many effects in each one 😂 But maybe one day I'll do it!
@@TaylorDanley maybe the most interesting are simple delay, chorus and tube screamer
Great video bro! But, no Firehawk?
Line 6 pod through a 100 watt fender champ. Shockingly very decent sound
The trick with the Pod HDs was to run two cabinets with different mics. I liked the Uber cab the best.
When I owned a Helix, I always went for the BE100, Mark IV, or Badonk. The Badonk didn't need a boost at all and just sounded great right away.
Any chance we can get a part 2 of the Budget Modeler shootout including the POD go and 3rd party IRs?
YES!
@@TaylorDanley I love you man.
Working my way into one metal heads heart at a time 😂😭😂😭
@@TaylorDanley Most of us are easy to please at least. Lol.
🍿 🤘 I still have the old rack XT, just a memory from a simpler time lol.
Haha, I know I cant part with some gear for that reason 😂😂😂😭😭
@@TaylorDanley I put the pod XT pro into the an fx loop in the axe fx III, it doesn't sound that bad with good IR. The big bottom model still warms my heart a little.
😂 amazing.
@@TaylorDanley monuments recorded their debut album with big bottom+criminal models quad tracked I think, let me see if I can find any evidence.... 🤔
@@TaylorDanley ruclips.net/video/er_U7VYwhNA/видео.html here you go from the man himself, it's actually 8 tracked
Love my hd but eventually want a helix . But both are sick and your complaints on the HD I like wise agree with. I want a 5150 but 50 bux
The hd cuts throoygh the mic so well. Rge custom ir makes all the diffetence n brings them closer
My POD 2.0 expired within the last two weeks. It was a trusty sidekick for nearly 20 years. I'm trying to decide on whether a POD GO is a suitable replacement or whether I should be more spendy and get a Helix LT. Not really likely that I need 32 blocks, so the GO is probably enough.
😪 the pod go will definitely cover the bases from the 2.0 and then some!
Repair it man! It's probably easy to fix it, if you can solder.
@@johanndaart7326 I can solder, but good luck soldering surface-mount optical sensors. Not an easy fix by any stretch and, well, in 2020 just not worth it. Still haven't replaced it. I've just been enjoying some quality time with my DSL.
would you do a video showcasing the pod xt live in 2020 and do a review? That's what I've been using for almost 4 years, I would like to see a comparison of thepod go, and the pod xt live!
I dont have a pod xt anymore... but I do plan to do something here with the X3 (which is almost the same thing) and HD VERY SOON
i use on stage a pod hd 500 i can use two amps same time and a lot option of pedals, a big problem is gabinets the options really sucks, ... i prefer uses without and direct on return sounds much better
I had a POD HD that I sold because I got bored of having to use with my mooer radar since stock cabs were terrible and before the radar was released, I NEVER went direct with it, always a power amp and a cab. I owned the thing for 9 years and sold it to buy a mooer ge250.
So now do you still like the mooer ge 250 do you recommend it, or you use something else?
Am I crazy, or does the stock IR in the POD HD sound better than the stock IR in the POD GO? The only Line 6 product I have is a DT25 combo, which is only because it was an incredible deal. It has the HD amp models built into it, and sounds decent for what it is.
You could probably spend some time with the IR in the POD GO to get a better sound, I didn't do much to it... but yeah, they aren't that great :(
HD Pro sounds absolutely killer here, but it is also a solid workhorse and been on a lot of big productions, actually think a lot of these now old gear is worth another chance since now even the hX stomp is almost 900 dollars new in scandinavia :-(
Overall: POD HD RACK
MIDS: POD BEAN
i vote the pod 2.0 with custom iR. i was pod 2.0 user upgrade to xtLive and then X3 live each time i upgrade always regret it, the built quality get worse and it’s really buggy. esp the x3live. since then i never look at line 6 product. even when they release the hd. all this game play of ir i think there’s plenty better option with more affordable price. currently i’m using bias fx 2 iOS and i am quite happy with it for now. since you bring this video. i’m thinking about buying used pod 2.0 for nostalgia. lol. thanks for the amazing video.
🙌
I still ha e a pod xt bean and yea sounds good with a decent IR.
In the shootout at the end i thought the pod HD sounded the best here.
In the mix with the custom IR the bean sounds shit-hot and the Go sounds a bit boxy, but I'm sure the definition is probably much better. All about the mix for sound quality. I'm just now selling an XT that I've had for a couple of years as I tried to get back into guitar (I've favoured bass for most of the past 2 decades) and this week I just got an HX Stomp. I can't explain how but it definitely sounds better in general. I'm not sure what it is about it - it could be a lot of placebo, but it definitely makes playing the instrument more fun, which is worth all of the money.
Then again I also just changed my strings for the first time in a 2 months, so which is the biggest factor here?
I bought the POD 2.0 back when it came out and still have it. It was pretty cool, but never used it LIVE (mostly for practicing with headphones on). I have to agree with you that China has come a long way. I have the Hotone Ampero and it f#ckin' Rocks! BUT, the Ampero isn't built great, because I've already sent it in for a warranty repair (ie: Touchscreen when to sh!t). China needs to work on QA. I recorded through a Rackmount POD Pro in a studio once. That sounded pretty good in Post.
Bummer on the ampero, I've never had issues, but have heard some people say the same with the screen