He actually lived in a home for boys for 6yrs, then with a foster-family where he was beaten almost daily for 5yrs,🤕, he's over-came so much in his short life, he should write a book about it.
I must say, when I first watched your channel a number of years ago when you were a young kid, I was in absolute awe of you knowledge and expertise at such a young age and still am. Diesel definitely flows through your veins buddy. I, like many others I am sure, are always excited to see when a new episode comes up. Regards from South Africa
Andrew, the first look at that track loader did not look so good but you looked it over and used your thinking skills to get it running. Good for you!!! Blessings to you,
Your videos are always excellent but I found that this particular one highlights how good a problem solver you are becoming, which is very good and important. In my opinion your future looks bright, your work ethic is great, you will be highly successful. Good luck and god bless you and yours.
That homeowner seemed like a really genuine cool guy, and you did a great job getting this going! I think me and you have a lot in common we work on things pretty much the same way great job man looking foreward to part 2
When Andrew mentioned, he enjoyed your channel Also I knew it would be something I might enjoy as well so I darted over to your channel thehomepros6221 to subscribe and found out I was Already subscribed. You caught my attention somewhere in the past. Is for Andrew, He is certainly someone special. 🙂🇺🇲
andrew, it'snot the machine, it 's the mechanic. wow. you have become one of the best. every step is with logic and reason. bravo. you should be so proud, and your folks should be very proud too. best wishes, keep reaching up
Gotta say ~ Thank you for putting a face to those Expert pair of hands. My dad used to tell me, there is nothing like "Hands-On" experience, to to broaden your learning. When you get in there; and get your hands soiled and learning by trial & error is Rewarding!! Keep learning as much as possible. You're still young and as the years pass, you'll be Mega successful. As usual, A.H., Well Done!!
Andrew. I've been watching your videos now for about A week and certainly have enjoyed each one. Thanks for taking the time to make them, please Keep on doing it, Jim 🙂🇺🇲
Good tip just cause an engine is stuck does not mean you can't get it unstruck with a little penetrating oil and job. She sounds amazing I know you still have a ways to go, but keep up the awesome work you do.
This could become my new favorite channel real quick,😁👍, this guy sure seems to know his stuff good enough,😉👌, awesome video Andrew, and thanks for sharing.
My Hats off to you young man! I watch A LOT OF HEAVY EQUIPMENT WILL IT START VIDEOS as well as maintenance videos by the top names in this field and you sir rate right up there with the best! Your get her done attitude speaks volumes of your character! I just subscribed! Got my eye on you! KEEP ON KEEPING ON!
Quick tip. First time viewer and loved your channel. Have an air compressor and some pressure in the fuel tank. That will push all the air out of the lines
With the damage until you moved it with the bar on the teeth it was not going to go. Then ya'll discovered ya'll still had the crank pully wrench on. Seeing as how it had moved and sprang back it was going to go.
…….. oh right, you also got yourself a white plastic garden chair in the cab to comfortably sit on Bet your helper, who got stuck with a cat dozer in his garden, must be very pleased with someone who knows what he’s doing.
I’m impressed by your ability to fix old equipment! Someone raised you right bud!👍
He actually lived in a home for boys for 6yrs, then with a foster-family where he was beaten almost daily for 5yrs,🤕, he's over-came so much in his short life, he should write a book about it.
@@jerryb1234
Is this true?
I love the white plastic chair in the operating station
I must say, when I first watched your channel a number of years ago when you were a young kid, I was in absolute awe of you knowledge and expertise at such a young age and still am. Diesel definitely flows through your veins buddy. I, like many others I am sure, are always excited to see when a new episode comes up.
Regards from South Africa
Congratulations, you've just taught a 67 year old man a whole load of useful stuff!
Thaks to the old fella who helped you out, sounds like a really good old fashioned guy. cheers.
Ford truck + Right Stuff user shows this young man is a head of the game.
Nothing but the best!
Andrew, the first look at that track loader did not look so good but you looked it over and used your thinking skills to get it running. Good for you!!! Blessings to you,
Great rescue!
✅. Good job Andrew
Really enjoyed watching your exploration right to the end
Greetings from the Netherlands
Stay safe, be humble and be blessed
These videos are addicting! Can't wait for the next one!
Your videos are always excellent but I found that this particular one highlights how good a problem solver you are becoming, which is very good and important. In my opinion your future looks bright, your work ethic is great, you will be highly successful. Good luck and god bless you and yours.
That homeowner seemed like a really genuine cool guy, and you did a great job getting this going! I think me and you have a lot in common we work on things pretty much the same way great job man looking foreward to part 2
Thanks, Yes he’s definitely a great guy. I enjoy your videos as well, keep em coming.
When Andrew mentioned, he enjoyed your channel Also I knew it would be something I might enjoy as well so I darted over to your channel thehomepros6221 to subscribe and found out I was Already subscribed. You caught my attention somewhere in the past. Is for Andrew, He is certainly someone special. 🙂🇺🇲
andrew, it'snot the machine, it 's the mechanic. wow. you have become one of the best. every step is with logic and reason. bravo. you should be so proud, and your folks should be very proud too. best wishes, keep reaching up
Gotta say ~ Thank you for putting a face to those Expert pair of hands.
My dad used to tell me, there is nothing like "Hands-On" experience, to
to broaden your learning. When you get in there; and get your hands soiled
and learning by trial & error is Rewarding!! Keep learning as much as possible.
You're still young and as the years pass, you'll be Mega successful.
As usual, A.H., Well Done!!
You have come a long way since your first videos! Keep up the good work and keep the videos coming! Thanks so much!
Nice job full restro on that would be cool keep them coming
You are amazing for a young man
good to see you not afraid to get your hands dirty and fix things well done!
Andrew. I've been watching your videos now for about A week and certainly have enjoyed each one. Thanks for taking the time to make them, please Keep on doing it, Jim 🙂🇺🇲
I knew you could put some life in that Cummins
If anyone would be able to fix it it would be you. Love your videos
The old gal running great the hydraulic system is working out good good job fellas 💪
Good tip just cause an engine is stuck does not mean you can't get it unstruck with a little penetrating oil and job. She sounds amazing I know you still have a ways to go, but keep up the awesome work you do.
This could become my new favorite channel real quick,😁👍, this guy sure seems to know his stuff good enough,😉👌, awesome video Andrew, and thanks for sharing.
Good job!! Your perseverance is great and you fixed it the rite way!!
Great job!!! Very persistent and methodical. Keep up the good work!
My Hats off to you young man! I watch A LOT OF HEAVY EQUIPMENT WILL IT START VIDEOS as well as maintenance videos by the top names in this field and you sir rate right up there with the best! Your get her done attitude speaks volumes of your character! I just subscribed! Got my eye on you! KEEP ON KEEPING ON!
👌👌👍👍 Good work! Thanks for the video.
Love the videos keep them coming 😊
Quick tip. First time viewer and loved your channel. Have an air compressor and some pressure in the fuel tank. That will push all the air out of the lines
Very smart young guy! Great job!!
Great video Thanks, keep us along as you work on it.
Awesome job Andrew.You never disappointed good job
You are awesome I didn't think that loader was going to run awesome video thank you
Great job young man
Awesome job 👍
PRETTY DAMN COOL !!! KEEP AT IT !!
Good work 👍
Nice work Andrew !
Keep up the good work
Nicely done
Well played youngin!
Good job man
Lucky boy finding the missing part!
well done.
Great job. Get some grease in those tracks too!
Nice CB ya have there bro,👍, I've been trying to gather-up all my CB stuff for a few weeks now.🤞🙄
Thanks, I don’t really use it much but looks cool at least.
One thing to tell you : 👍
You are very smart😅
A crawler doesn’t have a drivers seat…it has an operators seat😂😂😂
Good job as a 99year old 20 year old
Nice job mate. Engine oil and filter change maybe ? Regards Chris Bailey
Well done, Wes (WWW) should see this one, Bruce in AUS as well
How is your prybar that you left on the right track? 😉
With the damage until you moved it with the bar on the teeth it was not going to go. Then ya'll discovered ya'll still had the crank pully wrench on. Seeing as how it had moved and sprang back it was going to go.
…….. oh right, you also got yourself a white plastic garden chair in the cab to comfortably sit on
Bet your helper, who got stuck with a cat dozer in his garden, must be very pleased with someone who knows what he’s doing.
You should build or buy a flatbed for your truck
Wasn't the alternator spacer in the cardboard box with the injectors
I wonder if soaking a cylinder like that with Evaporust then siphoning out the liquid, would speed up the process?
Get that on a trailer and @ home before someone buys it out from under you.
I have it listed for sale, I am the current owner.
👏🍻👍🇺🇦
He's like 12!
voi alte chei fixe inelare nu aveti? sau asa va place sa va complicati cu aia reglabila.
1st
Definitely skipping, only running on 3