The siege Starscream had quite a number too. Thundercracker, Skywarp, Redwing, 3 rainmakers, sparkless seeker, hotlink, nacelle, senator shockwave, SG starscream. Making 12, I think.
It’s crazy just how much use they’ve gotten out of that Sideswipe mold. He really is the Autobot Seeker which is pretty funny because in Shattered Glass he is a former Seeker. However you really gotta hand it to that Megatron mold because at least the other molds mentioned were at least used to make a variety of different characters. There aren’t 12 Sideswipes or 12 Starscreams.
I find it hilarious that every video I've watched about this 2-Pack says Megatron is a siege retool and misses the obvious that it's just a repaint of Miner Megatron. Did people forget that 2-pack with Senator Ratbat?
I mean is it wrong to say kingdom red alert is the siege sideswipe mold On top of that miner megatron kills on its deco not its retooling, it look like siege megs in its normal colors, i wouldn’t have even noticed If not for his weapons
When I saw that announcement of the SDCC two-pack, I felt like a bowl of petunias that suddenly appeared in the sky over an alien planet next to a sperm whale, because I thought "oh no, not again."
Let’s see. Skids Burn Out Crankcase Crosscut Cannonball (with Red Alert soon to follow) It’s only been used six times- half as much as both Megatron and Starscream’s WFC-era molds.
@@EternityKingdomsHeadHoncho Do you know how many characters who shares Sideswipe's body-type are there? Ranging from: Sideswipe G2 Sideswipe (Black/Red) G2 Sideswipe (Yellow/Teal) Red Alert Deep Cover Clampdown Tigertrack Gigawatt SG Sideswipe (later Armada Wheeljack) Earth modes of the same characters And a blue generic Lamborghini robot who's a repaint with a similar name to Deep Cover
Technically the extensive cel-shading work on the 35th Anniversary Megatron is more Devastation accurate than G1, unless you count the higher animation budget the '86 movie had for showing the reflection of light on their armour.
If you're interested in the Toxitron Sideswipe, I did see four of them in the clearance area at a Walmart near me. Also Kingdom Red Alert was a Walgreens exclusive, and I've seen a few Walgreens that each have a different exclusive. One has three Red Alerts, there's one with a single Minerva, and a third with two Medix figures.
And you didn't even mention the SIEGE Seekers, which by my count are up to 13 versions between the normal 3, the Rainmakers, the 2 Netflix ones, the 2 in the Legacy Evolution Amazon sets, Redwing and both SG and Premium Edition Starscream. I hope we Bitstream and Sunstorm to at least complete the Welcoming Committee. And I can't believe we have gotten ZERO Spychangers out of Sideswipe.
They could probably still squeeze the Sideswipe mold for a RID Sideswipe to compliment the Strongarm we previously got. I could see the 86 Jazz mold get a few more reuses.
here's how they can get more uses out of the Sideswipe mold; retool the windshield and chest, retool the arms, and then they can pull off the Classics Sideswipe/Sunstreaker thing.
Still waiting on Sunstorm and an earth mode Nacelle. Using the siege toy makes sense for the cartoon, but the Earth mode will give him the features that made him distinct.
technically the earthrise seeker mould was also the classics seeker mould but bigger, with ankles and no partsforming. so you technically can count all those as well.
Siege Soundwave got a lot of use. Original, Walmart/35th Soundblaster, Takara Soundblaster, Legacy "clean" Soundwave. Plus Earthrise Netflix, Shattered Glass, Takara 3-pack, United Leader.
I could imagine the Sideswipe mold being used for more in Cyberverse, a Takara set piece, a cartoon accurate deco that comes with the Jetpack, maybe into a RiD/Car Robots Prowl, of which I am hoping will be done into a Universe Inferno.
The factory has returned the wrong color before, Mark Weber was disappointed with the Joe Crossover Powerglide Rattler coming back off red. If I recall right, during an interview he said one of his biggest regrets was not being able to make the factory re run or fix it. I would believe that the seeker suffered the same, it makes sense.
There are still plenty of figures I want to see done in the Earthrise Seeker mold. The classic Deluxe singer was done in over 30 different colors. We still need all those.
Got the Red Alerts backwards. Siege was general retail, Kingdom was Walgreens. Plus we could still get Earth versions of Tigerstripe, Deep Cover, and G2 Sideswipe.
I think what sets Siege Megatron apart from all these other mold reuses, and what makes him far more egregious, is that, unlike the others on this list, they're ALL Megatron! ALL! OF! THEM! The others are 90% different characters, and are meant to be collected en masse for army building. But Megatron? All variations of the exact same guy. Ironically, his most creative and arguably best use are his (currently) final two uses before 86 Megs shows up, the Miner/Gladiator versions. But because they're ALL Megatron, his case is more exacerbated than the other reused molds.
14 repaints and retools for Sideswipe??!! That's insane!! I have the Siege version in my collection, but I wasn't aware of most of the others, mind blown !
What about Sunstreaker? Is he another use of the Sideswipe mold? And what about Hotspot, Onslaught, Wheeljack, are these guys multiplying just like the four guys you talked about?
They already said it will be an entirely new mold, that's why they're milking this one right now. And it will also not be a gun, so not screen accurate. So what's the point?
I kind of expect an SS86 springer treatment, take the ER figure as a base, take out the partsforming weapon, clean him up a bit, don't have the feet blatently sticking out the back of the tank, and stuff in all the random weapons he picked up while fighting optimus
The blue deep cover is homage to diaclone powered convoy, as a blue sideswipe came with that figure Reason for the name? Probably not wanting to get an extra trademark
He was talking about the theme of the collection, which was decos that went unreleased during G2 in the 90s. The exception being Toxitron himself because he was a planned Universe 03 toy that never got released.
Hmm an over used mold i haven't been able to get hold of a copy of, this is if you live outside USA, I want a megatron earth mode which i can get for a cheap price here in Sweden.
Bumblebee got a new mold for the SS86 line, Sideswipe’s mold might just be his definitive mold. Although, we’re far from getting photos of the SS86 Megatron, it should be cartoon accurate but it’s going to be a tank, hopefully the tank will look like Megatron from Transformers: Devastation where the tank looks like an actual M1 Abrams with all the armor looking silver and the treads being only black.
A couple other molds that came to mind for me at MP-10 Optimus Prime There are like 19 uses of that mold. Siege Impactor also came to mind except that mold has actually only been used 5 times. Surprising Combiner Wars Impactor actually has more uses at 11. It was originally Rook. Oh and all the Sideswipes being retooled into Giggawatt made me want to check how many times Ectotron got reused. 13... or 12 cause the recent rerelease of Ectotron is unchanged from the original except the packaging was changed because they have the release year on the box in the Collaborative logo and the 2019 version was also the anniversary year for when the original Ghostbusters movie released so that was marked on the packaging as well. The 2024 version doesn't have that. And technically Ectotron is also an extensive retool since it does share parts and engineering with Hot Spot. They basically just flipped it around so what was the front on Hot Spot and Onslaught is now the back of Ectrotron. Similar to Giggawat it's impossible to tell they're the same toy in vehicle mode but then you get into robot mode and you see all the robot parts that carried over from the original. Ectotron can not be used as a combiner torso because those connector parts were removed in the retooling but he does retain some hinges on his biceps that I assume were transformation joints to get Hot Spot/Onslaught into torso mode because they don't seem to be used for anything on the Ectotron version. I mean I can kind of fake a double elbow bend but that joint is a little high for an elbow bend and just makes the arm look broken. Funny enough I've never owned the original versions of either collaborative figure but I just got Ectotron in yesterday.
I was honestly expecting the whole team of Throttlebots to be made from the Earthrise Cliffjumper mold. Hasbro's bound to make them sometime, and their design is practically the same as Bumblebee / Cliffjumper.
All sideswipe is missing is orange, green, purple and maybe even brown, gold, silver and pink, then we could literally do almost every sentai just using sideswipes
Megatron mould should have been put to rest right after ER release. That release already had weak knee joints while ankles angled slightly backwards make it very prone to tip back (made worse because of quite hefty backpack). Rise of Tyranny version is literally ragdoll, without going nuts with floor polish (or transparent acrylic paint) the best place for it is storage box. Siege tetrajet mould got quite a few (mostly, as far as I remember, it sports 2 or 3 head variants) repaints, I think senator Shockwave is 9th use. Weird thing with Red Alert, in my case Siege version was part of general retail (2nd or 3rd wave) while Kingdom one was some sort of exclusive. Old habits die hard, though Hasbro seems to be a little smarter with repaints then back in CW/TR days. On side note, I suppose Legacy Dirge repack is test run, probably coneheads won't get general retail re-release since Dirge is horribly shelfwarming.
I know the Sideswipe mold is over used, but I've been enjoying collecting them. I normally don't go for repaints all that often, but I got all the versions of Earthrise Sunstreaker and really wanted the matching Sideswipes and it gave me the collecting bug for that mold. I'm actually still hoping they put out earth modes for Tigertrack, Deep Cover and black G2, since they remain the odd ones out at this point.
I prefer the siege Seeker mold, and I have been TRYING to get ahold of Siege Skywarp. Favorite mold in my favorite color scheme. Like you’ve said previously black and purple is a good color scheme.
Considering the fact the Transformers card game had Slicer repainted with Armada Wheeljack colors, I get the feeling the Earthrise Wheeljack mold will be repainted into those colors just like the Siege Sideswipe mold
@uainjansun wheeljack was repainted as action master slicer(blue and black, also functions as SG wheeljack)...what he is talking about is a slicer that looks like an armada wheeljack which is black and yellow...
Saw this reveal, said the same thing, exactly the same thing, while i do have earthrise megs I'll be hinest and say the siege (any version, siege, netflix or the 'leader class' 3 pack) is better. Prime is cool because its 1 a use of a mold that hasnt been used til now with the obvious little updates
Sideswipe is one of my favorite molds zero kibble I do wish they would change the weapons from time to time. The Prowl family my biggest complaint is the clear plastic legs overall very good aesthetics. Next. the Seekers tend to have the same Robot and Vehicle appearance to make them troop builders. All of the Insecticons have the body with different chests models.
I talked about the Earthrise Seeker in the video, it's tied with Siege Megatron. I didn't mention the Siege Seeker but I should have, it also ties those two.
You know you can keep going with some other characters that use the same mold. I am waiting for a part 2 to this when they come out with another release using some more of the same molds not mentioned in this video lol
Eh I'm fine with mold reuses if it's a good mold like Sideswipe. At least it's not Universe Galvatron; that thing was trash from day 1 and it didn't stop Hastak from using it SEVEN TIMES, with the last time nearly TEN YEARS after its initial release.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Decepticon Seeker: "I look like... Thundercracker."
Armada Starscream: "Hey, that's my line!"
Too many people argue about G1 vs Bayverse to realize Armada is superior
TJ saw the new two pack and immediately got to work
Thats how everyone felt atm after the reveal
We really need a new G1 Megatron.
@@samurexatlas7373 The brief Chronicles toy-line from Dark of the Moon was a great idea. But as always, Hasbro fumbled it.
I thought he was gonna make a video just about how overused Siege Megatron was lol
The siege Starscream had quite a number too. Thundercracker, Skywarp, Redwing, 3 rainmakers, sparkless seeker, hotlink, nacelle, senator shockwave, SG starscream. Making 12, I think.
it just barely beats megatron, as theres a 13th in the premium finish starscream
We need more of that tetrajet imho. It's my favorite siege mold, only one I'm missing is skywarp.
The mold became different characters...this is 11 megatrons from the same mold
@@purplewolfranger22 yeah theres the other skywarp in tetrajet thats rare too...hot link ofc
@@uainjansun see that one I'm good on, got him chillin on the shelf.
It’s crazy just how much use they’ve gotten out of that Sideswipe mold. He really is the Autobot Seeker which is pretty funny because in Shattered Glass he is a former Seeker. However you really gotta hand it to that Megatron mold because at least the other molds mentioned were at least used to make a variety of different characters. There aren’t 12 Sideswipes or 12 Starscreams.
I find it hilarious that every video I've watched about this 2-Pack says Megatron is a siege retool and misses the obvious that it's just a repaint of Miner Megatron. Did people forget that 2-pack with Senator Ratbat?
Miner Megatron itself is just a Siege retool, so it's not wrong to call this one a siege retool too.
I like that two pack tbh. Still hate that mold
I mean is it wrong to say kingdom red alert is the siege sideswipe mold
On top of that miner megatron kills on its deco not its retooling, it look like siege megs in its normal colors, i wouldn’t have even noticed If not for his weapons
A: Miner Megatron itself is a retool of Siege Megatron.
B: He mentions this in the video.
and yet nothing will ever beat the classics seeker mold, the most used mold in transformers history with like, 30+ uses
When I saw that announcement of the SDCC two-pack, I felt like a bowl of petunias that suddenly appeared in the sky over an alien planet next to a sperm whale, because I thought "oh no, not again."
Sideswipe, Megatron, and Starscream are all reused very often
Skids mold....
Let’s see.
Skids
Burn Out
Crankcase
Crosscut
Cannonball (with Red Alert soon to follow)
It’s only been used six times- half as much as both Megatron and Starscream’s WFC-era molds.
@@EternityKingdomsHeadHoncho
Do you know how many characters who shares Sideswipe's body-type are there?
Ranging from:
Sideswipe
G2 Sideswipe (Black/Red)
G2 Sideswipe (Yellow/Teal)
Red Alert
Deep Cover
Clampdown
Tigertrack
Gigawatt
SG Sideswipe (later Armada Wheeljack)
Earth modes of the same characters
And a blue generic Lamborghini robot who's a repaint with a similar name to Deep Cover
@@jeffreytempleton3213
We kinda have TFP Arcee in Legacy, which will make every female robot who used her 2012 toy
@@EternityKingdomsHeadHonchoThey haven't even made Reboost yet
Remember the leaked up coming figures include a Devastation Seeker Commander. He would be a black and red Conehead with a sword.
I see your choices, and raise you Combiner Wars Dead End
Elita has, what, 3 or 4?
So she's dipping her toe into the water to be a heavy use mold.
Lancer, Novastar, Greenlight, Moonracer, Chromia (x2), Tentakil, Scylla/Skyulle, Nightbird, Kaskade.
@@Black_Knight767 what are you saying?
I'm talking uses of her recent mold.
@@samurexatlas7373 I was giving another example of a heavily reused mold
Technically the extensive cel-shading work on the 35th Anniversary Megatron is more Devastation accurate than G1, unless you count the higher animation budget the '86 movie had for showing the reflection of light on their armour.
How did I predict he was gonna talk about this exact topic today?!
If you're interested in the Toxitron Sideswipe, I did see four of them in the clearance area at a Walmart near me. Also Kingdom Red Alert was a Walgreens exclusive, and I've seen a few Walgreens that each have a different exclusive. One has three Red Alerts, there's one with a single Minerva, and a third with two Medix figures.
I still find it comedic that toxitron sideswipe has red alerts head
They're going through all this just so they can't give us a gun Megatron
I will say the legacy skids mold should get a shoutout here for how many times it’s been reused and remolded in only two or so years
8:10 - Just a Trivia: the "Hanging Meme" mentioned was from an anthology film entitled "The Ballad of Buster Scruggs"
TLDR; Hasbro hates wasting a mold.
That said, I don't think any mold will ever dethrone the Classics Seeker one as the most used ever.
And you didn't even mention the SIEGE Seekers, which by my count are up to 13 versions between the normal 3, the Rainmakers, the 2 Netflix ones, the 2 in the Legacy Evolution Amazon sets, Redwing and both SG and Premium Edition Starscream. I hope we Bitstream and Sunstorm to at least complete the Welcoming Committee.
And I can't believe we have gotten ZERO Spychangers out of Sideswipe.
They could probably still squeeze the Sideswipe mold for a RID Sideswipe to compliment the Strongarm we previously got. I could see the 86 Jazz mold get a few more reuses.
Very suprised we didnt see the Skids mold, that thing is done to death
I like to refer to the Netflix Deep Cover as Blown Cover, just to keep them straight in my head.
I want Hasbro to give us Individual packaged versions of Skywarp and Thundercracker , and NOT make it exclusive.
here's how they can get more uses out of the Sideswipe mold; retool the windshield and chest, retool the arms, and then they can pull off the Classics Sideswipe/Sunstreaker thing.
Still waiting on Sunstorm and an earth mode Nacelle. Using the siege toy makes sense for the cartoon, but the Earth mode will give him the features that made him distinct.
Seeing Megatron holding his Fusion Cannon is always off putting
I thought that the seeker was the most used but nope it is the Swipe mold that is King
It's about as jarring as Seekers holding their null rays as handheld weapons lmao.
@jeebus2313
Ikr, I'm just glad that no version of Hotrod has had removable arm Blasters. That would be jarring
20:26 There's that word again, heavy. Why are things so heavy in the future? Is there a problem with Earth's gravitational pull?
technically the earthrise seeker mould was also the classics seeker mould but bigger, with ankles and no partsforming. so you technically can count all those as well.
Would cordon and spinout count as lambros molds too?
There a so many Sideswipe repaints that they might as well be the Autobots' equivalent to the seekers.
Siege tetrajet and its thirteen uses (so far) over here feeling left out.
An Autobot car mold been used more than a seeker mold!? Unbelievable!
All these reuses and not once has Siege Megatron been made into a new character…
Not even Archforce.
I could see them using the recent Skids mold more too.
This is why HasBro didn't hire highly experienced toy engineers, and not creating Leader-sized comic-accurate redesigns from IDW 2009 proves it.
I have the Ghost Starscream. It’s a solid figure. Love the G1 episode of Starscream’s Ghost and where he scares the Spark out of Tankor.
12 Megatron’s and NOT ONCE did we get a head with his IDW “blue hair.”
Siege Soundwave got a lot of use. Original, Walmart/35th Soundblaster, Takara Soundblaster, Legacy "clean" Soundwave. Plus Earthrise Netflix, Shattered Glass, Takara 3-pack, United Leader.
I'm also surprised you didn't add in the Siege Seeker mold. We had so many uses of it
1:29 Is it bad that I think the hammer looks more like Megatron is holding a piece of bubblegum w/ a trash cleaning stick?
I could imagine the Sideswipe mold being used for more in Cyberverse, a Takara set piece, a cartoon accurate deco that comes with the Jetpack, maybe into a RiD/Car Robots Prowl, of which I am hoping will be done into a Universe Inferno.
The factory has returned the wrong color before, Mark Weber was disappointed with the Joe Crossover Powerglide Rattler coming back off red. If I recall right, during an interview he said one of his biggest regrets was not being able to make the factory re run or fix it. I would believe that the seeker suffered the same, it makes sense.
There are still plenty of figures I want to see done in the Earthrise Seeker mold. The classic Deluxe singer was done in over 30 different colors. We still need all those.
Got the Red Alerts backwards. Siege was general retail, Kingdom was Walgreens. Plus we could still get Earth versions of Tigerstripe, Deep Cover, and G2 Sideswipe.
I think what sets Siege Megatron apart from all these other mold reuses, and what makes him far more egregious, is that, unlike the others on this list, they're ALL Megatron! ALL! OF! THEM!
The others are 90% different characters, and are meant to be collected en masse for army building.
But Megatron? All variations of the exact same guy. Ironically, his most creative and arguably best use are his (currently) final two uses before 86 Megs shows up, the Miner/Gladiator versions. But because they're ALL Megatron, his case is more exacerbated than the other reused molds.
14 repaints and retools for Sideswipe??!! That's insane!! I have the Siege version in my collection, but I wasn't aware of most of the others, mind blown !
What about Sunstreaker? Is he another use of the Sideswipe mold? And what about Hotspot, Onslaught, Wheeljack, are these guys multiplying just like the four guys you talked about?
Actually Sunstreaker is an ER Wheeljack retool
I think they kept releasing RiD 15 Starscream through cyberverse and earthspark, even though it was a notoriously bad figure
I customizing an Acid Storm and Sun Storm.
There are still several earth mode seekers I would take, but always had issues with the cyberronian version breaking up the faux canopy
Imagine the leaked SS 86 Megatron is just earthirse again except with slightly better paint and extra accessories
They already said it will be an entirely new mold, that's why they're milking this one right now. And it will also not be a gun, so not screen accurate. So what's the point?
Would be a flop. And strangely we got that already not even long ago with the throne ser with a good repaint and another great fig
I kind of expect an SS86 springer treatment, take the ER figure as a base, take out the partsforming weapon, clean him up a bit, don't have the feet blatently sticking out the back of the tank, and stuff in all the random weapons he picked up while fighting optimus
I honestly thought Alpha Bravo was going to be on this list.
Then I remembered when Combiner Wars came out...... I feel old.
They’ve made like like 12 megatrons out of the siege molds and I have never owned a single one
Im surprised you didnt bring up Skids, with 2 repaints, a retool, a repaint, and a retool of THAT
actually the siege rewd alert was regular retail and the kingdom one was walgreens
The blue deep cover is homage to diaclone powered convoy, as a blue sideswipe came with that figure
Reason for the name? Probably not wanting to get an extra trademark
I just use it as Devcon’s earth mode. I actually do like the figure though.
Cloud cover from the toxitron series was released, I know because I own one . They were released through wallmart .
He was talking about the theme of the collection, which was decos that went unreleased during G2 in the 90s. The exception being Toxitron himself because he was a planned Universe 03 toy that never got released.
they really need to reissue the shattered glass figures in mass retail, similar to the new legacy wave with the velocitron 500 wave
Hmm an over used mold i haven't been able to get hold of a copy of, this is if you live outside USA, I want a megatron earth mode which i can get for a cheap price here in Sweden.
I really really hope the Earthrise seeker mold gets used for Sunstorm.
Bumblebee got a new mold for the SS86 line, Sideswipe’s mold might just be his definitive mold. Although, we’re far from getting photos of the SS86 Megatron, it should be cartoon accurate but it’s going to be a tank, hopefully the tank will look like Megatron from Transformers: Devastation where the tank looks like an actual M1 Abrams with all the armor looking silver and the treads being only black.
*look at my only siege Megatron, no other version of the mold* “Huh I guess we got too many of them eh?”
A couple other molds that came to mind for me at MP-10 Optimus Prime There are like 19 uses of that mold.
Siege Impactor also came to mind except that mold has actually only been used 5 times. Surprising Combiner Wars Impactor actually has more uses at 11. It was originally Rook.
Oh and all the Sideswipes being retooled into Giggawatt made me want to check how many times Ectotron got reused. 13... or 12 cause the recent rerelease of Ectotron is unchanged from the original except the packaging was changed because they have the release year on the box in the Collaborative logo and the 2019 version was also the anniversary year for when the original Ghostbusters movie released so that was marked on the packaging as well. The 2024 version doesn't have that. And technically Ectotron is also an extensive retool since it does share parts and engineering with Hot Spot. They basically just flipped it around so what was the front on Hot Spot and Onslaught is now the back of Ectrotron. Similar to Giggawat it's impossible to tell they're the same toy in vehicle mode but then you get into robot mode and you see all the robot parts that carried over from the original. Ectotron can not be used as a combiner torso because those connector parts were removed in the retooling but he does retain some hinges on his biceps that I assume were transformation joints to get Hot Spot/Onslaught into torso mode because they don't seem to be used for anything on the Ectotron version. I mean I can kind of fake a double elbow bend but that joint is a little high for an elbow bend and just makes the arm look broken.
Funny enough I've never owned the original versions of either collaborative figure but I just got Ectotron in yesterday.
I love my Miner Megatron, but it does feel loose in some place out of the box.
I was honestly expecting the whole team of Throttlebots to be made from the Earthrise Cliffjumper mold. Hasbro's bound to make them sometime, and their design is practically the same as Bumblebee / Cliffjumper.
Would we rather have had them wait until 2025 to reuse the new if-it-is-a-tank SS86 Megatron mold?
All sideswipe is missing is orange, green, purple and maybe even brown, gold, silver and pink, then we could literally do almost every sentai just using sideswipes
Siege Megatron and Sideswipe are good molds. Earthrise Starscream should’ve ceased to be used the second they finished the Coneheads.
Shattered glass Megs has great colors, but that attempt at a jet mode killed it for me
Megatron mould should have been put to rest right after ER release. That release already had weak knee joints while ankles angled slightly backwards make it very prone to tip back (made worse because of quite hefty backpack). Rise of Tyranny version is literally ragdoll, without going nuts with floor polish (or transparent acrylic paint) the best place for it is storage box.
Siege tetrajet mould got quite a few (mostly, as far as I remember, it sports 2 or 3 head variants) repaints, I think senator Shockwave is 9th use.
Weird thing with Red Alert, in my case Siege version was part of general retail (2nd or 3rd wave) while Kingdom one was some sort of exclusive.
Old habits die hard, though Hasbro seems to be a little smarter with repaints then back in CW/TR days.
On side note, I suppose Legacy Dirge repack is test run, probably coneheads won't get general retail re-release since Dirge is horribly shelfwarming.
So many seeker uses, and I still could never get my hands on earthrise thundercracker.
Now if only they would crank out those Lightning Collection figures the way they crank out these Transformers molds.
I know the Sideswipe mold is over used, but I've been enjoying collecting them. I normally don't go for repaints all that often, but I got all the versions of Earthrise Sunstreaker and really wanted the matching Sideswipes and it gave me the collecting bug for that mold. I'm actually still hoping they put out earth modes for Tigertrack, Deep Cover and black G2, since they remain the odd ones out at this point.
How many uses did they get out of the Energon Arcee mold?
is it bad that i still kinda wanna get an earth mode tiger track?
I prefer the siege Seeker mold, and I have been TRYING to get ahold of Siege Skywarp. Favorite mold in my favorite color scheme. Like you’ve said previously black and purple is a good color scheme.
I recently saw G2 Ramjet in Walmart a couple of days ago.
Or, was it Cloud Cover? Probably that one.
The Siege Starscream mold could have been included in this if they did the Coneheads.
repeat molds is why they only really have like 20 mps, while some 3rd parties have season 1-3 almost complete
I feel like the Battle Masters Firedrive and Aimless had a lot of reuses.
I got the Siege Megatron mold in cell shaded Cartoon Colors because I like the those Colors on Megatron. And it has become my default G1 Megatron.
Yay , Sideswipes! I have them all, lol.
Tetra jet seekers are probably close, too. Legacy Skids is up to 5, I think.
They never released a plain version of Siege Megatron... that's just nuts.
Cliffjumper’s cannon is perfect for Core Megatron’s tank mode.
I’d buy a Blackout. Also with all the Sideswipes it’s surprising we haven’t gotten green yet.
Considering the fact the Transformers card game had Slicer repainted with Armada Wheeljack colors, I get the feeling the Earthrise Wheeljack mold will be repainted into those colors just like the Siege Sideswipe mold
Lol it did get repainted. Not a figure talked about but the slicer has a cool paint scheme and i think it fixed the knee qc the wheeljack figs had
@uainjansun wheeljack was repainted as action master slicer(blue and black, also functions as SG wheeljack)...what he is talking about is a slicer that looks like an armada wheeljack which is black and yellow...
Saw this reveal, said the same thing, exactly the same thing, while i do have earthrise megs I'll be hinest and say the siege (any version, siege, netflix or the 'leader class' 3 pack) is better. Prime is cool because its 1 a use of a mold that hasnt been used til now with the obvious little updates
Sideswipe is one of my favorite molds zero kibble I do wish they would change the weapons from time to time.
The Prowl family my biggest complaint is the clear plastic legs overall very good aesthetics.
Next. the Seekers tend to have the same Robot and Vehicle appearance to make them troop builders.
All of the Insecticons have the body with different chests models.
Siege Seeker has 13 I think.
The Siege and earthrise Seekers are up there, if not equal. You should have done Earthrise Prime. He's got a lot too.
I talked about the Earthrise Seeker in the video, it's tied with Siege Megatron. I didn't mention the Siege Seeker but I should have, it also ties those two.
@@TJOmega Yeah, I posted before the video reached that point. Disagree on dead Starscream LOL
what about the ironhide mold?
You know you can keep going with some other characters that use the same mold. I am waiting for a part 2 to this when they come out with another release using some more of the same molds not mentioned in this video lol
6:08 But flat is justice!
Eh I'm fine with mold reuses if it's a good mold like Sideswipe. At least it's not Universe Galvatron; that thing was trash from day 1 and it didn't stop Hastak from using it SEVEN TIMES, with the last time nearly TEN YEARS after its initial release.
How many retools and reuses does Siege Ironhide have?
I need to get my hands on the Netflix Megatron.
It’s fairly easy to remove all the battle damage off of the original Siege Megatron.
It was already a 6/10 the first time
Legacy Arcee and Skids should have honorable mention