Ich hätte noch in den Griff ein Loch rein gemacht damit man eine längere Stange dran machen kann für bessere Hebelwirkung aber ansonsten schnell gebaut erfüllt den Zweck! Weiter so
So I watched the video waiting for the "NEW TOOL". All I got was a 200 year old screw jack that was built to break. You welded the wrong type of bearing to start with. The althread is not rated for that type of load. And it won't take long for it all to end up seized. But you will get a good grad in 6th grade metal shop class. 🤣🤣
I want you to know something this is new if you can find someone who have build or some store that they sold like this with bearing I will quick second one this bearing is most powerful bearing you can fine that’s why I use this one which will make very easy to lift the car almost with one hand
Reminds me of a similar device I saw loooong ago. My only concern is this design can collapse sideways. Needs bracing on the sides. Nicely done otherwise.
More like a triangulated or boxed footing which could increase stability would make it more safer and probably a second nut to serve as a locking nut to prevent colllapse from sheared threads of shaft under heavy weiht
Ok it's something different. But I do not think it is easy to use, it is difficult to operate there! Besides, it is only for the workshop, it is too bulky to have it in the trunk
Nice try, I can see that you are thinking and I really hate to burst your bubble, but...it's possible that the bearing centers will punch out under load. They were not designed for vertical stress use. You need a tapered thrust roller bearing, or better yet a spherical thrust roller bearing. For your use the bearings should be corrosion resistant. For goodness sake, NEVER weld on a bearing cage , you WILL compromise the bearing's integrity. Also, the ready rod you have used will most likely gall and seize in time, under the weight of a vehicle. An ACME threaded rod would be much better to use. Nor is your stand triangulated for stability, it would have been better to put in four braces reaching to the ends of the angle iron feet. If the jack center welds are compromised in some fashion and it leans, ALL the weld will let go and the vehicle will come down...FAST! This isn't a new invention by a long ways. Vertical screw jacks have existed for many many many decades, some were made with bearings. I know this becasue I have four of them made from cast iron that were once building jacks, they incorporate not one but two bearings, have a wide square base and are serviceable. They are capable of holding up a five ton truck completely off the ground. Very nice paint job by the way...
this, but make it possible to use whatever 1/2" tool to lift it. Also making different sizes so that you can have taller jack stands. The one you made is great for whatever tire change there needs to be done, but the next step is to do a step up to something that will allow you to change oil or do work under the car.
...para mi gusto, solo le faltó ser plegable ya que en esa posición resulta algo incómoda y estorbosa para portar en la cajuela. Le doy un 8 Con total respeto. Saludos 👋😃
Ok great idea but poorly executed. The bearing type used is great for radial load but not axial load. Welding bearing shells is a huge no no. You will crack the bearing. So, using a radial type bearing and installing it in a way that is likely to crack then using it to support a car while you work under it is really unsafe. Find a thrust bearing to take axial load and fit it so you don't have to weld it and you'll be much safer
Do you think he understands the difference between radial and axial load? Hope this comment moves him to ask, learn something and stop putting himself on such a risk. .
You can use this in different ways example to haul your car or to lift your car I think it’s amazing idea because the bearing helps very much to move easier
those kind of jacks have been invented many, many years ago and they are very strong and will last forever the way they made it. I still have one from my dad.
Hello, do not be tired. It is great. Thank you. But I have a suggestion: I think it would be better if you welded 4 handles crosswise instead of 2. Thank you. Ali from Tabriz
Thank you very much Ali Your idea is wonderful and I think with the four handle it will be much better but it work very nice with two and he’s very easy but I think with four it will be much easier thank you very much have a wonderful day
It's funny. Because I've bought a Chevrolet Jack since Sunday many times 2 pounds first has two tons of power and climbs on the outside with the handle.
I would rather use your jack for something else other than lifting something as big as a car. I would think of using that jack ok modified of course to maybe lift heavy fridge or organ that needs to be moved.
I think this is a great idea for light vehicles but very dangerous for cars. your hands are inside the car area. look at a standard hydraulic jack your hands are basically outside the car area.
If you open your trunk and lift up the spare tire cover you will be amazed with the newer tool that comes with your car...yes it is a futuristic car jack that the aliens brought to this earth millenials ago and compared to this tool it is safe
Hahahahaha. If its supplied by factory yes it should be safe. Some jacks made by factories are crap. My dad used the scissor jack and the damn thing like flew out from under the car and that was on level ground! But yes haha. The ones usually coming with the car is lot safer than one in video. And its quicker.
Repent to Jesus Christ! Are you a sinner? Mark 2:17 King James Version 17 When Jesus heard it, he saith unto them, They that are whole have no need of the physician, but they that are sick: I came not to call the righteous, but sinners to repentance.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
MUITO bom gostei 👍👍
Great ideas not fabrications it's really mantaince free 👍
Yes, thanks
what a fantastic invention ,,, how about inventing a round thing that could go on each corner of a car or wagon , so it would roll along easier ...
This is a good idea. I like it too much!
Thank you
Good idea. Did you put a stopper at the end of the thread for safety?
Thank you no I didn’t I miss that
Que ideia boa gostei de mais,só faltou o pino que encaixa no carro ter aquela cruzeta que vai no facão
Amazing ide...well done👏💪❤
Thank you 🙏
Es buenisimo esto amigo gracias x el video saludos
درودوسپاس.واقعازیباوجالب بود.ممنونم🎉
Thank you very much and thank you for your being here
Ich hätte noch in den Griff ein Loch rein gemacht damit man eine längere Stange dran machen kann für bessere Hebelwirkung aber ansonsten schnell gebaut erfüllt den Zweck! Weiter so
Show.👏👏 Magnífico você é o Cara... Parabéns... BH MG.. Brasil..
So I watched the video waiting for the "NEW TOOL". All I got was a 200 year old screw jack that was built to break. You welded the wrong type of bearing to start with. The althread is not rated for that type of load. And it won't take long for it all to end up seized. But you will get a good grad in 6th grade metal shop class. 🤣🤣
Absolutely agree with all of that.
I want you to know something this is new if you can find someone who have build or some store that they sold like this with bearing I will quick
second one this bearing is most powerful bearing you can fine that’s why I use this one which will make very easy to lift the car almost with one hand
At the beginning first, i need a good welding machine. Can you tell us your welding machine brand name and model number using in your plant.
Mig
Ö0000
Reminds me of a similar device I saw loooong ago. My only concern is this design can collapse sideways. Needs bracing on the sides. Nicely done otherwise.
More like a triangulated or boxed footing which could increase stability would make it more safer and probably a second nut to serve as a locking nut to prevent colllapse from sheared threads of shaft under heavy weiht
I'd be more concerned about that thread, anything less than trapezoidal (acme) thread simply won't do for that application.
Ok it's something different.
But I do not think it is easy to use, it is difficult to operate there!
Besides, it is only for the workshop, it is too bulky to have it in the trunk
Nice try, I can see that you are thinking and I really hate to burst your bubble, but...it's possible that the bearing centers will punch out under load. They were not designed for vertical stress use.
You need a tapered thrust roller bearing, or better yet a spherical thrust roller bearing. For your use the bearings should be corrosion resistant. For goodness sake, NEVER weld on a bearing cage , you WILL compromise the bearing's integrity. Also, the ready rod you have used will most likely gall and seize in time, under the weight of a vehicle. An ACME threaded rod would be much better to use. Nor is your stand triangulated for stability, it would have been better to put in four braces reaching to the ends of the angle iron feet. If the jack center welds are compromised in some fashion and it leans, ALL the weld will let go and the vehicle will come down...FAST! This isn't a new invention by a long ways. Vertical screw jacks have existed for many many many decades, some were made with bearings. I know this becasue I have four of them made from cast iron that were once building jacks, they incorporate not one but two bearings, have a wide square base and are serviceable. They are capable of holding up a five ton truck completely off the ground. Very nice paint job by the way...
Оригинальное изобритение. Имеет право на жизнь.👏👍
this, but make it possible to use whatever 1/2" tool to lift it. Also making different sizes so that you can have taller jack stands. The one you made is great for whatever tire change there needs to be done, but the next step is to do a step up to something that will allow you to change oil or do work under the car.
god job👍
Thank you
...para mi gusto, solo le faltó ser plegable ya que en esa posición resulta algo incómoda y estorbosa para portar en la cajuela. Le doy un 8
Con total respeto.
Saludos 👋😃
what's wrong with a standard jack?
Wow they should really use some kind of mechanism to jack up cars. That would make fixing cars a lot easier. Alert the press!
Ok great idea but poorly executed. The bearing type used is great for radial load but not axial load. Welding bearing shells is a huge no no. You will crack the bearing. So, using a radial type bearing and installing it in a way that is likely to crack then using it to support a car while you work under it is really unsafe. Find a thrust bearing to take axial load and fit it so you don't have to weld it and you'll be much safer
Do you think he understands the difference between radial and axial load?
Hope this comment moves him to ask, learn something and stop putting himself on such a risk. .
And maybe an acme threaded rod. Why all jacks and vises use that thread?
Exelente idea y una herramienta muy práctica
Thank you
I prefer the default scissor jack! Proven & tested! Cheers
I think it’s a cool idea, maybe it could use a different type of bearing that would be more suitable to take the weight but otherwise I like it.
New to you, rickety as hell to me!
Опасный домкрат! Под машину руки совать при подъеме - такое себе...
Looks like it is a little bit on the weak side for safety.
You can use this in different ways example to haul your car or to lift your car I think it’s amazing idea because the bearing helps very much to move easier
Perfec 👍👍👍🇲🇽🇲🇽🇲🇽🇲🇽
Thank you
Muy inseguro, los hilos no aguantan tanto peso!!!... el hidráulico es mejor, pero felicitaciones por el intento!!
Nice made...but where is the invention?😐 And the top should be U shaped so the car doesn't fall/slip off. Now it's dangerous to use!
Cordial saludo desde CDMX 🇲🇽. Exelente inventó
those kind of jacks have been invented many, many years ago and they are very strong and will last forever the way they made it. I still have one from my dad.
Hello my friend, I gust want to know what kind of bearing you use
And what safety standards does this fall under? Will insurance cover damages, injury or death when this invention fails?
overtime if the thread fails then bye bye car. It'll be cool if u show us taking off the wheel and u working under the car.
Congratulations friend , it was very good , this type of jack , are identical to those used to lift aircraft , of course in much larger sizes !!!
Rất mong được đồng hành cùng bạn nhé ❤️ cảm ơn bạn đã chia sẻ líp 👍 đã 👉 bat chuông 🔔👉 lịke 👍 đăng ký..
Top muito bom esse vide
genial idea un gato hidraulico casero
Muito bom vc tá de parabéns
Hello, do not be tired. It is great. Thank you. But I have a suggestion: I think it would be better if you welded 4 handles crosswise instead of 2. Thank you. Ali from Tabriz
Thank you very much Ali
Your idea is wonderful and I think with the four handle it will be much better but it work very nice with two and he’s very easy but I think with four it will be much easier thank you very much have a wonderful day
@@DIY.Invented
I kiss the hands of artists. I love creativity and I do art myself. I wish you always be happy and healthy.👏💋👍🤲💐🙏
@@DIY.Invented de
Are you supposed to weld on bearings? I think I would have used 4 pc of angle iron, made a square. Used 4 more, went each corner to the pipe.
É incrível esse macaco, gostei muito!!!
It's funny. Because I've bought a Chevrolet Jack since Sunday many times 2 pounds first has two tons of power and climbs on the outside with the handle.
Lemme guess... you visited a boatyard and saw dozens of these things.
Genial invento.
I would rather use your jack for something else other than lifting something as big as a car. I would think of using that jack ok modified of course to maybe lift heavy fridge or organ that needs to be moved.
Parabéns adorei essa ideia
What about the height when the tire is flat ??
Enhorabuena Arquímedes.
Мало рычагов, короткие , резьбу завтра отрыгнет
Not quite a new invention. Something like that is called a screw jack. The starting height limits how high it can go.
exelente ,,
O macaco hidráulico é mais simples, e prático e não ocupa muito espaço
FINALLY some one built a jack stand that function properly
Thank you for watching
what name bearing?
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
ótima ideia . alguém sabe o código deste rolamento?
con el gato es mas rápido .. y esa creación es muy peligrosa
Looks like it got enchanted in minecraftlol
I think this is a great idea for light vehicles but very dangerous for cars. your hands are inside the car area. look at a standard hydraulic jack your hands are basically outside the car area.
I would use a jack it quicker🤔
Yes but if you don’t have this will be a good idea to have home or you can use this like holder
@@DIY.Invented yeah but if i dont have a jack the i need a welder angle iron and evey thing else💯❤️u bro and i was taking the piss
@@DIY.Invented try popping an air ram in there and hook it up bro🤔😉
If you open your trunk and lift up the spare tire cover you will be amazed with the newer tool that comes with your car...yes it is a futuristic car jack that the aliens brought to this earth millenials ago and compared to this tool it is safe
Hahahahaha. If its supplied by factory yes it should be safe. Some jacks made by factories are crap. My dad used the scissor jack and the damn thing like flew out from under the car and that was on level ground! But yes haha. The ones usually coming with the car is lot safer than one in video. And its quicker.
Fantastic
Thank you! Cheers!
Super sir
i had something similar think it was called a jack lol
🆗 👍
Debería ser un tornillo más grueso.
machine rate
Bang beli dimana alat lasx
Você não botou os centímetros a grossura do parafuso
its a dangerous...😮
No it’s not
👍👍👍
A patentarlo👍😃
Una semana mas tarde logro levantar el auto!
Repent to Jesus Christ!
Are you a sinner?
Mark 2:17
King James Version
17 When Jesus heard it, he saith unto them, They that are whole have no need of the physician, but they that are sick: I came not to call the righteous, but sinners to repentance.
🤔🤔🤔🤔... мммммм-... уета! 🤦👏👏
👍🏾
Just a screw bottle jack.
Absolutely terrible and unsafe idea! That bearing fails, whatever is underneath is gonna get crushed.
it's a car jack big deal
Сопланетники,смотрите Доктора Дью. Спасибо.
No me convence. Muy fragil
Roda linda
Method ok but no strong
Next Ingenius tool ruclips.net/video/mcF2yrMSR7A/видео.html
Gostaria de ver levantar a parte do motor
esa cosa es prehistorica,
holy cow shit danger
👍
Очень долго
Not a new idea!
Megusta
Topyzera
Es mucho pedo y roba mucho espacio en la cajuela
NNNAAAAAAA
Выкинь эту хрень на помойку !
markenyot muter weer keek nyut croot