In the Garage with KJ Raycing Vol 2: Racing Slicks and Track Setup
HTML-код
- Опубликовано: 2 окт 2024
- Check the description for more Information.
Track day was a blast and I want the second go around to be spectacular. Proper tires and proper gearing should make good use of the high horsepower to weight ratio. Also a custom intermediate pipe for an aftermarket exhaust made for free 99. I hope this helps you guys with your projects and tune in for the biggest of big announcements coming soon!
-Kyle
Plans Available Here: kj-raycing.dpd...
100+hp Build Series Here: • 100+HP Crosskart Build...
Easy Affordable No Lathe Chain Driven Spool Here: • Making an IRS Center s...
Budget Build Series Here: • Inexpensive Crosskart ...
2 Seat Crosskart Build Series Here: • Two Seat Crosskart Bui...
Plans detail and Materials needed
• Crosskart Plans: KJ Ra...
Custom length chassis
• Inexpensive Crosskart ...
Preferred tubing bender and notcher
www.Roguefab.com
Facebook KJ Raycing
Once you have the plans come join the build discussion
Facebook Build Group (KJ Raycing VF-1 and VF-2 Kart Builders) / 905565813954510
Instagram @kjraycing
Storefront kj-raycing.dpdcart.com
DISCLAIMER
Videos are for entertainment only, work performed in the video should only be accomplished by a professional technician. KJ Raycing will not be held liable for ANY personal injuries.
It's the quality of the build, not were it's built. Time to learn Tig for those beautiful welds.😁 Bye the way your neighbor seems to be mowing their lawn a lot of the times your filming. 🤔
Sounds Sweet
She's a BEAST
Having no back pressure doesn't hurt the valves... it's a super old saying from back in the day when having the engine flow out more air would lean out the afrs and the undesirable exhaust valve materials would suffer from excessive heat due to the engine running leaner and not being tuned correctly. Let it breath! Increasing back pressure also increases cyl temps and risk of detonation... which damages rod Bearings or potentially throws a rod out also
Can you adjust the high speed on your shocks? I would do that first before spending the money to revalve. You might not have too
man youve inspired me to not only build one of these but completely design my own version scaled up. think awd and close to 1000hp, to compete with the performance of the hoonicorn. love the vids mate keep it up, inspiring the next generations here :)
There’s some room there for a turbo
I’m thinking of buying your plans and doing your buggy set up. Awesome video and thankyou for everything!!!!!
Edit-I have a 100mph buggy already
Looks and sounds great!
Can't wait to see you out on the track!
It’s going to be so fun!
Hey I love your builds man, I’m trying to build something similar, where do you get your heim joints?
LOVE it! The new exhaust sounds so mean!
My brain wraps around the wheel size as 25.4mm positive offset! The Australian V8 Supercars (touring cars) have a race where they hit 300km/h (185mph) on ONE straight during the race... During qualifying, which is the fastest they go the entire weekend, they have might hit 190mph and that is where the rev limiter kicks in, sometimes they hit it during qualifying, sometimes they don't, so if you are hitting 127mph, I would say to gear it so the rev limiter kicks in at 130mph
I figured there were some offset guys in the crowd 🤓.
I spoke with some guys that run 600cc bikes on that track and they are hitting 120 on the straight. I figure my kart can’t be faster than a bike. Cars that run that track get just over triple digits. Like last time I hope to have fun and learn things for next time. Thank you for the insights 👍
Have you thought of going to Hurricane Utah and playing along side the UTV's at Sand Hollow? and even taking it into the 4WDriving trails out there? don't worry about getting stuck, Matt's Off Road Recovery would be more than happy to "Get Em Out", plus there are other cool people in the Area like Paul from Fab Rats
Brother if my channel had more subscribers or gas wasn’t so expensive and if I didn’t have so many military obligations I would go all over so guys could check these out. I think we are soon going to to see them showing up all over the world. There are so many being built!
Matt’s Off Road Recovery is so cool btw 👍
Can’t wait!! 🎉🎉🎉🎉
Another great video! I can't wait to see it on the track again.
Man I can’t wait to go again and I can’t wait to share it with you guys!
If anyone knows how to get one of these let me know
You build it, bud. I show you every step and it’s proven that you can do it 👍
@@KJRaycing what you don't know is in in stage 3 having COPD from working in a shop and then owning my owen auto repair shop of a total of 45 years. I tried welding but the smoke kills me. It's a bucket list thing.
Of course no reply
I’m sorry.
Sierra Karts will sell you one, they start at about $60K. KJ Raycing will help you build your own for a whole lot less, but you have to get your hands dirty in the process.
Trying to buy one of these is a joke
No, you just don’t want to pay $70k for a sierra car and you don’t want to build one. You want me to sell you $6,000 in parts and 6 months worth of work for how much again? Oh and what is the 15 years of research and planning that went into all of this? Is it that hard to just say something nice?
@@KJRaycing you're wrong. I have a ton of respect for you and your talent as a builder. I have left messages also with my phone number asking to speak to someone in regards to buying one of your chassis.
@russellafowler7403
He has stated in more than one video that he's not interested in selling these. Just the plans and he's donating those proceeds!
He's sharing his knowledge, plans, and talent with the DIY crowd.
If you're not interested in building one from scratch for yourself then maybe this isn't the channel for you.
@@4legdfishman you must of voted for Biden.
Besides who ask you .....