Dear, if your oem interface is the ID4 NBT, Pls buy following link: www.amazon.com/dp/B08VHVSHY1?ref=myi_title_dp if your oem interface is the ID 6 EVO, You need buy this one: www.amazon.com/dp/B09KXYR4R5?ref=myi_title_dp You can refer to the 5th picture to determine whether your car is ID4 or ID6
You shouldn’t put the GPS and the 4G antenna together like that. They interfere with each other. They should be far apart from each other. The GPS in the glovebox and the 4G behind the facia above the air vents or vice versa. They both should be hidden out of sight and not on display on the dashboard like that. 🤔
Is it possible to replace an original 8,8 inch screen with this unit and connect only the LVDS cable, to get a bigger display for the original/native BMW Entry/Evo system?
Sorry, our product is Android system. It needs to be connected to power supply etc. What you mentioned should be the 8.8" display from the BMW factory. I don't sell it.
Maybe I can explain my question in another way. The BMW F30 entryevo doss not allow to install a lager original display than 8,8 inch. Otherwise the „no signal“ message appears. If my understand is correct, your 10.2“ system can display the original UI (parallel to the android mode) if I install it with the shown/complete wiring. Is that correct?
@@user-yn8tj3pt3b your 10.2“ system can display the original UI (parallel to the android mode) if I install it with the shown/complete wiring. Is that correct? Reply: Yes
Dear,You can refer to the video below, which is a demonstration of the operation of the PEMP Android screen. ruclips.net/video/IlIB2aWuZlM/видео.html The following video may also help: ruclips.net/video/YjlEotgRyyo/видео.html Their models are different, but the functions of the Android system are the same.
@@pempcar yes, thats will do nicely. thats the one thing about aftermarket stuff, they tend to make the car look non factory and sloppy with things hanging out of everywhere. we can lose that g4 box too or place it in a less conspicuous area. thank you
After transferring the USB interface, the Android sound channel takes up your original USB, and your armrest box USB becomes the Android USB interface.
@@vanilla1st The PEMP bmw f30 evo sold now is Version B, and the android sound will take up the armrest USB port. So I suggest you use the PEMP android USB to charge your phone .
This problem is very good, if you have to use the original car's USB to upgrade, you can only pull out the Android plug, and then restore it after the upgrade.
hola tengo un bmw evo finales 2018 dentro del apoyabrazos no tengo entrada auxiliar solo USB es compatible, pues e tenido otra y tenia prblema con las llamadas con eco gracias.
Dear, does your armrest box have an AUX input port? Does the original car interface have an AUX menu? If not, you need to follow the video to use the original car USB port as the audio input of the Android. And every time before entering Android, you need to select the usb menu of the original car.
Dear, your 2013 bnw 328i is a NBT ID4, You need buy following product. www.amazon.com/dp/B08VHVSHY1?ref=myi_title_dp or www.amazon.com/dp/B09L4TQ8G8?ref=myi_title_dp If your purchase is correct, please contact our after sales team:service@pempcar.com
Hello i installed yesterday and the screen and zlink auto connect is amazing ! Im.not sure what i did wrong the screen shows music playing but i dont have sound in my car at all. Also i get no car info access .. help pls 🙏
This may be because the iso socket on the back of the OEM radio is not inserted in place. Please contact our after-sales service team（service@pempcar.com) to solve it for you. Thanks
Hello, I bought this screen and installed this screen in my BMW F30 2017 worked perfectly but i gave the car back because of a bad bargain. Does this screen fit in a BMW F34 from 2015 with NBT EVO ID4?
Dear, if the EVO you purchased is type B, you need to connect the USB aux audio box to the USB port of the armrest box. Please refer to the product details description on Amazon. If you still can't solve it, please contact our after-sales service team service@pempcar.com
Hello. I have exacly the same product, and i have Connect to my bmw, but there is Sound issues, there is no Sound when i PLAY Music on the Android (Apple CarPlay) and i have benn try all thing, but its still not Worning. Can u help?
Well, let your after-sales team try it. You send the questions about the products you purchased and the photos of the wiring to our after-sales team. Service@pempcar.com, they may have a solution to your problem.
@@nytan22 Because the audio of the bmw EVO system is input from the USB to the OEM Radio, the USB transfer is very important, please pay attention to the USB transfer process starting at 10:03 of the video. I would like you to send the picture of the connecting cable to our after-sales team email service@pempcar.com, we will deal with your problem quickly.
whats the point????????? You can simply get a big screen and code the existing HU, and for carplay you just need activation, this entrynav2 in the video already had a WLAN port for carplay
If you want to use 4G network and use PEMP Android navigation, you need to install these 2 antennas. If you don't use 4G, and always use your phone's navigation, you can leave it installed.
Dear, this one only support NBT-EVO. you need check the OEM interface is ID4 nbt or ID6 nbt-evo. If your oem interface is id4 nbt,you need buy following link product. www.amazon.com/dp/B08VHVSHY1?ref=myi_title_dp
No, this one cam mot support your 2016 f22, following link fit your car: Android 11: www.amazon.com/dp/B09L4TQ8G8?ref=myi_title_dp Android 10: www.amazon.com/dp/B08VHVSHY1?ref=myi_title_dp
Your car is ID5, it should have AUX jack in the armrest box. You need to change the wiring harness connector and also update the product software. To be compatible with your 2017 340 ID5. If you want to do so, please contact our after-sales service team at service@pempcar.com to learn how to make changes before purchasing.
Great upgrade - we also install these over here in the UK!
Just ordered it for my 2016 bmw 328i and I’ll keep you guys posted and yes I will follow very carefully step by step
Dear, if your oem interface is the ID4 NBT, Pls buy following link:
www.amazon.com/dp/B08VHVSHY1?ref=myi_title_dp
if your oem interface is the ID 6 EVO, You need buy this one:
www.amazon.com/dp/B09KXYR4R5?ref=myi_title_dp
You can refer to the 5th picture to determine whether your car is ID4 or ID6
Do you recommend I follow this video for the installation and yes I did buy the one from the link you sent me
@@Official_MichaelBustos your oem car is nbt id4 or id6 NBT-EVO? Which one?
@@Official_MichaelBustos if you oem interface is the NBT ID4, pls refer following video install:
ruclips.net/video/gG0oaqmKK9k/видео.html
This screen works in a f36 2018 id6?
You shouldn’t put the GPS and the 4G antenna together like that. They interfere with each other. They should be far apart from each other. The GPS in the glovebox and the 4G behind the facia above the air vents or vice versa. They both should be hidden out of sight and not on display on the dashboard like that. 🤔
Your suggestion is very good! It can benefit many car owners.
Is it possible to replace an original 8,8 inch screen with this unit and connect only the LVDS cable, to get a bigger display for the original/native BMW Entry/Evo system?
Sorry, our product is Android system. It needs to be connected to power supply etc.
What you mentioned should be the 8.8" display from the BMW factory. I don't sell it.
Maybe I can explain my question in another way. The BMW F30 entryevo doss not allow to install a lager original display than 8,8 inch. Otherwise the „no signal“ message appears. If my
understand is correct, your 10.2“ system can display the original UI (parallel to the android mode) if I install it with the shown/complete wiring. Is that correct?
@@user-yn8tj3pt3b your 10.2“ system can display the original UI (parallel to the android mode) if I install it with the shown/complete wiring. Is that correct?
Reply: Yes
Where did you buy the retrofit from? Will it work with 2018 320i with no navigation?
Yes，if your car is a EVO system, you can buy it from pemp store
www.pempcar.com/products/bmw-f30-evo-android-screen
We need more on how the screen works, the features, etc.
Sorry, I just found the exact video on your profile, great
Dear,You can refer to the video below, which is a demonstration of the operation of the PEMP Android screen.
ruclips.net/video/IlIB2aWuZlM/видео.html
The following video may also help:
ruclips.net/video/YjlEotgRyyo/видео.html
Their models are different, but the functions of the Android system are the same.
why cant you use the factory gps antenna? having the gps antenna on the dash looks sloppy
Dear. if your have the oem gps antenna, You can purchase a PEMP antenna adapter.
www.amazon.com/dp/B0CN12J6VR?ref=myi_title_dp
@@pempcar yes, thats will do nicely. thats the one thing about aftermarket stuff, they tend to make the car look non factory and sloppy with things hanging out of everywhere. we can lose that g4 box too or place it in a less conspicuous area. thank you
Does this share the factory USB port in the armrest or do you need to have a separate cable hanging out under the dash?
After transferring the USB interface, the Android sound channel takes up your original USB, and your armrest box USB becomes the Android USB interface.
@@pempcar so can you still use the armrest box USB to charge your phone if thats the case? or no electricity comes out of it anymore
@@vanilla1st The PEMP bmw f30 evo sold now is Version B, and the android sound will take up the armrest USB port. So I suggest you use the PEMP android USB to charge your phone .
@@pempcar Is there a way we can communicate a bit? I'd like to order one of these and I have some more questions.
@@vanilla1st Please send our afer-sales team email at Service@pempcar.com
Hi, I see this is replacement for EVO head unit, which I need. But your link only has for NBT and CIC. How do I buy literally this one from the video?
Now that this product is sold out, it will arrive in warehouses around March 5th. You can repurchase.
If the original USB input now routes to the Android unit, how would I be able to do map updates for the BMW iDrive navigation system (for example)?
This problem is very good, if you have to use the original car's USB to upgrade, you can only pull out the Android plug, and then restore it after the upgrade.
hola tengo un bmw evo finales 2018 dentro del apoyabrazos no tengo entrada auxiliar solo USB es compatible, pues e tenido otra y tenia prblema con las llamadas con eco gracias.
Sí, el EVO 2018 obtiene su sonido a través de USB. Este producto se adapta a tu coche.
Will there be a version for the touchscreen NBT EVO head unit?
this is a good question, if your oem was touch screen, after install, you can not use touch on OEM interface. only use the touch on android interface.
My problem is (with no signal). Is this cable only for audio or does it solve this problem of lack of signal?
if your oem info no signal, should be the LVDS cable issue.
What I can do? i installed on my f36 2018 id6 and i have no sound. I have to solve with the auxiliary cable?
Dear, does your armrest box have an AUX input port? Does the original car interface have an AUX menu? If not, you need to follow the video to use the original car USB port as the audio input of the Android. And every time before entering Android, you need to select the usb menu of the original car.
Hello when I switch to Apple CarPlay my music isn’t working but my original radio is why is that? My car is 2013 bmw 328i xdrive
Dear, your 2013 bnw 328i is a NBT ID4, You need buy following product.
www.amazon.com/dp/B08VHVSHY1?ref=myi_title_dp
or
www.amazon.com/dp/B09L4TQ8G8?ref=myi_title_dp
If your purchase is correct, please contact our after sales team:service@pempcar.com
Hello i installed yesterday and the screen and zlink auto connect is amazing ! Im.not sure what i did wrong the screen shows music playing but i dont have sound in my car at all. Also i get no car info access .. help pls 🙏
This may be because the iso socket on the back of the OEM radio is not inserted in place. Please contact our after-sales service team（service@pempcar.com) to solve it for you. Thanks
Can you use CarPlay without wireless. Like wired connection
it built-in wireless CarPlay function. if you want wired carplay, you need update the zlink app to 5.3.28 version.
Hello,
I bought this screen and installed this screen in my BMW F30 2017 worked perfectly but i gave the car back because of a bad bargain.
Does this screen fit in a BMW F34 from 2015 with NBT EVO ID4?
this one can not fit your bmw f34 from 2015 with nbt, following product fit it.
www.amazon.com/dp/B09L4TQ8G8?ref=myi_title_dp
Wy no sound en Apple car play?
Dear, if the EVO you purchased is type B, you need to connect the USB aux audio box to the USB port of the armrest box. Please refer to the product details description on Amazon.
If you still can't solve it, please contact our after-sales service team service@pempcar.com
Great video, I want one now.
You can buy it from amazon.
@@pempcar Yes I looked but am not sure about the specifications yet. Thank you.
@@pempcar No it is not on Amazon France.
@@TheBioniXman Yes, there are no sales in France for the time being
Hi when will this be available to buy from amazon uk
It could be as soon as June, as Amazon's UK policy is different. We are preparing.
Hello. I have exacly the same product, and i have Connect to my bmw, but there is Sound issues, there is no Sound when i PLAY Music on the Android (Apple CarPlay) and i have benn try all thing, but its still not Worning. Can u help?
Well, let your after-sales team try it. You send the questions about the products you purchased and the photos of the wiring to our after-sales team. Service@pempcar.com, they may have a solution to your problem.
I have the same issue. Does it need an aux cable to sound?
@@nytan22 Because the audio of the bmw EVO system is input from the USB to the OEM Radio, the USB transfer is very important, please pay attention to the USB transfer process starting at 10:03 of the video. I would like you to send the picture of the connecting cable to our after-sales team email service@pempcar.com, we will deal with your problem quickly.
What if I have no fiber optic cable¿ EVO 2018
If you don't have fiber, you don't need to move it. This product will still fit your car.
whats the point????????? You can simply get a big screen and code the existing HU, and for carplay you just need activation, this entrynav2 in the video already had a WLAN port for carplay
How to upload a logo and set it to start with?
if your product is a android 12 or 13, you can refer below video made the start Logo.
ruclips.net/video/pImJ7w8lyZ8/видео.html
Is this compatibile with ENAVEVO?
What year was your car made and what model is it.
@@pempcar 2019 april. F31 320d.
@@boghybb Yes, this one fit your car.
Hello will this work on a 320d 2017 RL Entrynav system?
Tnx
if your 2017 320d is a nbt id4, this one can not fit it. you need buy following NBT System.
www.amazon.com/dp/B08VHVSHY1?ref=myi_title_dp&th=1
Is putting the antenna and gps necessary
If you want to use 4G network and use PEMP Android navigation, you need to install these 2 antennas. If you don't use 4G, and always use your phone's navigation, you can leave it installed.
Hello thanks for the video. Would this work on my bmw 1 series F20 2016 model?
Bryan, this one can not fit your 2016 f20. The product linked below is suitable for your F20
www.amazon.com/dp/B08VHVSHY1?ref=myi_title_dp
Does this fit my 2016 bmw 328i
Dear, this one only support NBT-EVO.
you need check the OEM interface is ID4 nbt or ID6 nbt-evo. If your oem interface is id4 nbt,you need buy following link product.
www.amazon.com/dp/B08VHVSHY1?ref=myi_title_dp
Will this fit an f22 2016?
No, this one cam mot support your 2016 f22, following link fit your car:
Android 11:
www.amazon.com/dp/B09L4TQ8G8?ref=myi_title_dp
Android 10:
www.amazon.com/dp/B08VHVSHY1?ref=myi_title_dp
Will this fit my 2018 bmw 330i??
Yes, it fit your 2018 bmw 330i
I've got the same of similar screen and it runs hot at the rear of the screen does anyone know if this is bad or if its the same as theirs?
Working in summer, the screen surface temperature does not exceed 65 degrees Celsius. The product does not fail. Then it should be fine.
Are the 4g antenna and GPS antenna required?
Yes, you are right. It supports 4g netwrok and gps function. There are two accessories（4g antenna and GPS antenna） in the product box.
Nice just can't live seeing when it shows android and not BMW 🤮
Do you mean you want the bmw logo to be displayed on boot? You can contact our technical service to solve it for you. service@pempcar.com
@@pempcar Thank You!
Will this be wired connection only for my 2018 330i? No Bluetooth?
PEMP Android are Bluetooth-enabled and it supports wireless Carplay connection.
Will this work on a 2017 340i with id5?
Your car is ID5, it should have AUX jack in the armrest box. You need to change the wiring harness connector and also update the product software. To be compatible with your 2017 340 ID5.
If you want to do so, please contact our after-sales service team at service@pempcar.com to learn how to make changes before purchasing.
@@pempcar I checked and dont have a aux jack in the armrest box. I have 1 usb under the climate control and that seems to be it
@@semtexs2178 OK, our after-sales team will reply you. thanks