No es un video sobre cómo construir una fresadora es un video de un chico mostrando su fresadora. Gente como tu NO hace falta aquí. El muestra sus resultados para que uno aprenda a no cometa sus errores.
nice job. a few suggestions for you: accuracy is low because of loose timing belts and weak stepper motors. use a spring to stop backleash between two nuts on Z axis. use same const. on X-Y axis. have bigger stepper motors. use a smaller bit on rotary tool with a softer wood, maybe better to start with some foam.
screws falling out, bit wobbling, good idea but not your finest work, I think this would have been better suited for laser engraving, no vibration and less torque for the stepper motors to deal with. Clearly you have learned from past mistakes, your more recent projects have been awesome :)
Hi! How are you? I'm having trouble setting up my 28byj-48 motors, I don't go a few steps pressing to make it record 1mm. I would be very grateful. Ex: $ 0 = XXX.XXX (x step / mm) on the x and y axes, what values did you put? Thanks greetings.
5mm pulleys on stepper motors ? can you give me the amazon link ? i already saw them but i'm not convinced because they look too deep, anyway they works (al least in your cnc :) )
Big step missing here. Those motors will not work with those drivers as the motors are unipolar. They need to be modified. OR use ULN2003 drivers and modified grbl
oahh thank you for sharing but impossible to achieve if we do not have a 3D printer it's a shame ... In french below merci pour le partage mais impossible à réaliser si on n'a pas d'imprimante 3D c'est dommage...
Belt needs to be paralel otherwise it will get loose at center and tight in the extremity. Your screws are loose. Those motors are very weak for this purpose. Your cutting tool is not well centered.
Help me my cnc is not working but my cnc is a other type that is......I have done with dvd player and one servo motor like (creative channel) u can search the above channel
Świetny film jak nie budować frezarki. Jeszcze nie zaczęła ,a śruby same się odkręcają. Brawo
No es un video sobre cómo construir una fresadora es un video de un chico mostrando su fresadora. Gente como tu NO hace falta aquí. El muestra sus resultados para que uno aprenda a no cometa sus errores.
20 seconds in and my mind goes straight to catastrophic failure. Nice work, I hope to build one soon. Thumbs up.
nice job. a few suggestions for you:
accuracy is low because of loose timing belts and weak stepper motors.
use a spring to stop backleash between two nuts on Z axis.
use same const. on X-Y axis.
have bigger stepper motors.
use a smaller bit on rotary tool with a softer wood, maybe better to start with some foam.
For its simplicity, the most beautiful work I've ever seen!
ruclips.net/video/0OEZiJNIVvw/видео.html
Чётко замутил) поржал когда в начале шайбы с болтами сыпались ))
I love how it's falling apart during the demonstration. That's pretty much how my projects go.
es macht richtig Spass dir beim arbeiten zuzusehen, ☺
Great video
A lot of hard work in making CNC machine
I chuckled when the washer and nut came loose. Not because I was taking pleasure in it, but I've been there and had that happen to me.
A Total genius. beyond I was watching, this the nicest CNC ever build. Thank you for sharing
thank you very much for your kind words
ohhhh my god, each of the parts of the machine is falling i think so..... that's too scary. good work but fix screws
screws falling out, bit wobbling, good idea but not your finest work, I think this would have been better suited for laser engraving, no vibration and less torque for the stepper motors to deal with. Clearly you have learned from past mistakes, your more recent projects have been awesome :)
Tussi great ho pra gi....
Hi! How are you? I'm having trouble setting up my 28byj-48 motors, I don't go a few steps pressing to make it record 1mm. I would be very grateful.
Ex: $ 0 = XXX.XXX (x step / mm) on the x and y axes, what values did you put? Thanks greetings.
I REALLY APPERICITE YOUR WORK ..DUDE ...
THANKS FOR THE VEDIO DUDE..KEEP GROWING..I AM WITH U BUDDY
😊😊😊
thank u very much
Bro can u tell me the specifications of spindle motor and connection to the cnc shield. thanks in advance..
Nice work for How did you connect the drilling developer? How to increase dimensions cnc??
Great job, but can you tell me the vref of these little motors thank you
what voltage did you set for the A4988 driver?
amazing - well done - where did the red plastic components come from?
Para que no deforme tienes que hacer más lento el avance de la herramienta, es un secreto
Good morning Mr. Innovative, your video is really well done, congratulations.
Greetings from Raffaele from Parma
I love how from the first second it started to loose nuts and bolts
thaks for share whith us your job , please can tell me the measurements of the pieces
and how many nuts and bolts do you use please:3
Мне понравилась эта работа как развлечение. Большой работы на этом станке не сделаешь, но можно изучить основы станков этого типа.
nice work sir have to make cnc mini wire bending like that
I love the project, please can you tell me what is the height of the metal angles of the Z axis, I would like to do it also with the 3D printer
Can't wait to see you perfecting this machine :)
soon...
Hey basically this cnc board also has 4 ports so can we not make 3d printer out of it
Good job, but your tool is vibrating to much :)
5mm pulleys on stepper motors ? can you give me the amazon link ? i already saw them but i'm not convinced because they look too deep, anyway they works (al least in your cnc :) )
Big step missing here. Those motors will not work with those drivers as the motors are unipolar. They need to be modified. OR use ULN2003 drivers and modified grbl
Hi at how much did you calibrate the drivers? please
never give up
They ALL have THIER STRONG SUITS. and apps they are BEST FOR!!
Muy bueno. Great job. It´s going to help me a lot, when I will made my own cnc machine, Thanks a lot.
That machine its good but you need use other drill and try not use the flex tool to improve more prefection
yes i must have to use lead screw instead of belt and linear bearing as well
Great job.I also appreciate your work.
GOOD WORK... needs a lot improvement..
yes lead screw are must for engraving
Colocou para a maquina ir muito rapido quase quebra a fresa
What is the red thing used for making X axis and Y axis?
need some software and hardware alignment. otherwise nice built
Nice project dude.
I always praise you work...
thanks
Can it do router job? Please answer me sir
I want to diy a plotter for cylindercal object. Want to etch somrhing on a cylindrical surface. Can you pls help?
oahh thank you for sharing but impossible to achieve if we do not have a 3D printer it's a shame ... In french below
merci pour le partage mais impossible à réaliser si on n'a pas d'imprimante 3D c'est dommage...
grbl controller Nu-i mai bun decât această competiție o poți găsi pe Magazin Play
What are these x axis y axis and z axis
nice man
bro what is the power u had supplied to the cnc engraver shield iam using neema 17 stepper motors
Use a 12vdc supply.
Bravo but these motors are slow and not very fast or powerful.i would use nema23 ones for this
boa tarde onde eu encontro esta estruturas para fazer esta cnc
AWESOME THANKS BROTHER FOR UR WORK
che marca e questa cnc x favore
Are those red parts made by using 3Dprinter ?
Yes
на этих шаговых двигателях пять проводов. Какой провод Вы отрезали?
Hello
The list of component is not complete ( ex:R1 ), please complete the description
Awsm dude 🙌
thanks
Can you tel me how can I get code or program for cnc .with nena 17 stepper motor
what is controlling this miller not this XYZ
Latest version in your video was not 1.61. but 1.65 :)
Nice! I will try !
All tings falling😂😂😂in0:11
great effort. everything is perfect seems perfect but why is not giving you a straight lines
its because timing belt they are not so perfect in tension
good
Well done
Can you upload STL Files for Y motor and the otherside for the belt (you put in with acrilyc)
Belt needs to be paralel otherwise it will get loose at center and tight in the extremity.
Your screws are loose.
Those motors are very weak for this purpose.
Your cutting tool is not well centered.
mr.innovative can u please help me with the programming. I'm intrested in doing this project.
Help me my cnc is not working but my cnc is a other type that is......I have done with dvd player and one servo motor like (creative channel) u can search the above channel
Oh my, that screw on the left!!!
Price for this machine
SCREWS AND NUTS ARE DANCING,LOL.
Sir mera cnc plotter kaam nahi kar raha hai koi solution bataiye
Very gud
Bro please make a CNC machine programmed and controlled with (Bluetooth) Android mobile phone.please..
this balance explode your machine, but good work
Starting with a washer and a locking nut flying, i would have stopped and checked it
how can it be a mini ....bit over kill with the rotary tool cud of just used a nice 3phase motor instead lol very good build keep it up
Can you tell me the dimensions on the machine please
i like the video
Heyy sir how to modify this to automatic solder machine
Is the engraving video played at original speed?
how many parts did you lose during demonstration 😒
I'm also working on same project but i need some help
.😢😢
needs work but a good start :)
Nice work
thanks
Very Nice !! Like !!
Судя по результату фрезеровки, это хлам.
Lo de la tuerca y la arandela cayendose es para partirse!!!!!
Can u say the dimesions of 3d files
bravo
thanks
nice
sorryy i was jokingggg hahaha its so cool i like it
;)
WTF! Things coming apart! SELF DESTRUCT! in 3, 2, 1
OMG! PRESS THE ''EMO'' BUTTON!!!
too fast... feedrate dikurangi...
mereko cnc banakar chahihe