Glad to see you are settling in, must have been a hell of an undertaking moving all that stuff alone lol. Family must be so happy to have Dad around again. Good video, thanks for sharing, AC is one thing I am clueless about haha. Can't wait for the compound 6.0 build!
Very happy you’re settled in Josh! But I will like to put some pointers out for those who are watching your video. When you’re doing your refilling AC, leave the high closed as there is a potential to when your compressor kicks on, It’ll throw over 200 psi to your can and make it a literal bomb. When ever you’re refilling your AC just open the low side and it’ll be fine. Also, 10 minutes is fine for a vacuum, but if you live in a high moisture environment, it’s good practice to vacuum more than 10 minutes and closer to an hour if possible so you’re able to boil the moisture out of the AC system. Leaks are one thing but moisture can kill a compressor. Another good practice is to go ahead and throw a little dye in there for future leaks if you ever need to find one. last, but not least, I see that you were using refrigerant that has a sealer in it. Definitely a big no-no as that sealant can cause major problems within your system.
You forgot to bleed out the air in the yellow/suction every time you changed the cans… you remove the center cap on the manifold (like at (17:38) and a shredder valve is there, press it until some refrigerant comes out - you will be surprised. Air inside the system will break down a compressor over time
love the videos, typically when I use cans, I puncture it until I hear refrigerant escaping and then remember to bleed air out of the yellow line by unscrewing it at the manifold or else you will introduce air into the system
Nice work. When i pulled my cab, i pulled the compressor and kept it with the cab so I didn't have to mess with it. Pain but it worked. I should buy the tools too. Place lioks pretty nice. I hope it stays nice and safe.
Not that I like correcting thing's but the vac test you should've shut the valves then waited 10min also the yellow hose is backwards and yes you can hold the can upside-down when filling sounds like it's full with those kinda numbers great video bro happy wife happy life josh 😅
Your neighborhood reminds me of my old stomping grounds growing up in NW LV. Everyone were pretty chill but as a teen with I still found ways to piss everyone off. lol Mostly from me and my lil bro making to much noise 24/7 with the daily burnouts and before school revving our primered out shitboxes with straight headers lol Mis those days Now I live in Communist state of California
Awesome video. Love the content you put out. I have 2 questions. My 2006 f250 6.0. The AC blows out of the defrost only. And my truck doesn't cool while In idle . But when I take off, it cools. Do you know what these problems might be?? Thx
hey you need to look up the cods in caif,, utoo was helping you,, you can not vam, like what u are doing, the gas need to go in a bottle, not atmosphere ps take it shop too vacuum. just heads up,,
ive got a buddy who does industrial hvac. 1200+lb systems. The company will let a leak go over the weekend and have it all vent to atmosphere because they didnt want to pay for ot. No one cares about the epa its all for show and the little guy cant leak enough to atmosphere in a lifetime what these guys leak in a month.
Glad to see you are settling in, must have been a hell of an undertaking moving all that stuff alone lol. Family must be so happy to have Dad around again. Good video, thanks for sharing, AC is one thing I am clueless about haha. Can't wait for the compound 6.0 build!
It really was! and thank you!
Very happy you’re settled in Josh! But I will like to put some pointers out for those who are watching your video. When you’re doing your refilling AC, leave the high closed as there is a potential to when your compressor kicks on, It’ll throw over 200 psi to your can and make it a literal bomb. When ever you’re refilling your AC just open the low side and it’ll be fine. Also, 10 minutes is fine for a vacuum, but if you live in a high moisture environment, it’s good practice to vacuum more than 10 minutes and closer to an hour if possible so you’re able to boil the moisture out of the AC system. Leaks are one thing but moisture can kill a compressor. Another good practice is to go ahead and throw a little dye in there for future leaks if you ever need to find one. last, but not least, I see that you were using refrigerant that has a sealer in it. Definitely a big no-no as that sealant can cause major problems within your system.
I was wondering what happened. This was a great video!!!! Loved the informative content!!!
Glad you enjoyed it!
You forgot to bleed out the air in the yellow/suction every time you changed the cans… you remove the center cap on the manifold (like at (17:38) and a shredder valve is there, press it until some refrigerant comes out - you will be surprised. Air inside the system will break down a compressor over time
I cant wait to see how the shop looks when you get it set up and moved in..
Very cool! gotta get ready for summer! Sweet neighborhood too, i do like that weather!
You got that right!
AC is a must! Glad to see you've got a nice place with places to go ride the sxs. Everyone knows a factory race truck has to still have ac.
Nice to see you back that part of woodcrest/Riverside is nice
That wife comment. Wow! Bless your wife for rolling with it. Great content Josh!
? Isn't he doing his husband duties?
You butt hurt feminist?
Wow you're so woke ha ha
love the videos, typically when I use cans, I puncture it until I hear refrigerant escaping and then remember to bleed air out of the yellow line by unscrewing it at the manifold or else you will introduce air into the system
Nice work. When i pulled my cab, i pulled the compressor and kept it with the cab so I didn't have to mess with it. Pain but it worked. I should buy the tools too.
Place lioks pretty nice. I hope it stays nice and safe.
I got an 07 third gen because of Josh after 4 years with my P-pump truck. Now I want a King Ranch 6.0L or single cab LBZ.
6.0 for life
That’s awesome no HOA! Them bastards. Good video about to replace a ac compressor on the 05 Cummins. Adrian
super easy on that year cummins!
Not to bad on drywall been doing drywall for 40 years the more u do it the easy it gets😊
Not that I like correcting thing's but the vac test you should've shut the valves then waited 10min also the yellow hose is backwards and yes you can hold the can upside-down when filling sounds like it's full with those kinda numbers great video bro happy wife happy life josh 😅
Ok glad I can finish this video. Started yesterday came back and it was gone I hope RUclips doesn't mess with you again
I hope so too
Love the videos man
What’s going brother I’m in the middle of a 6.7 Cummins swap in my 06 ram 2500 using 5.9 ecu does it have to be custom tune for that swap ?
Your neighborhood reminds me of my old stomping grounds growing up in NW LV. Everyone were pretty chill but as a teen with I still found ways to piss everyone off. lol Mostly from me and my lil bro making to much noise 24/7 with the daily burnouts and before school revving our primered out shitboxes with straight headers lol Mis those days Now I live in Communist state of California
Awesome video. Love the content you put out. I have 2 questions. My 2006 f250 6.0. The AC blows out of the defrost only. And my truck doesn't cool while In idle . But when I take off, it cools. Do you know what these problems might be?? Thx
Vacuum system isn’t working possibly and your fan clutch may not be working properly
@@Diesel_Lifestyle Yea it was my vacuum pump
😊😊😊😊😊😊10/10
I love the aluminum tray that behind the grille, where do I get one?
PSP diesel
🤟
Wait you moved to cali? Wtf
Well, he did.
👍💪
What wheel set up do you have in the 6.0?
22x12 jtx 305 45 22 nitto 420v
@@horsetorquesdiesel what size of tires do you recommend for towing but still look nice
hey you need to look up the cods in caif,, utoo was helping you,, you can not vam, like what u are doing, the gas need to go in a bottle, not atmosphere ps take it shop too vacuum.
just heads up,,
it blew the line the system was already drained. nothing in this video breaks the law lol
ive got a buddy who does industrial hvac. 1200+lb systems. The company will let a leak go over the weekend and have it all vent to atmosphere because they didnt want to pay for ot. No one cares about the epa its all for show and the little guy cant leak enough to atmosphere in a lifetime what these guys leak in a month.