what is the use of port binding in internet cofiguration and how it is done when i am using mac filter allowlist, i am able to connect to ssid, but not connected to internet, pls explain
Router kharab hone se dusra router dusra kuch bhi company ka router khud configuration kor saktahu ki nahi . Router bsnl verified hona mandatary he kiya sir ji
On this revo router. Which lan port is of 1gE and which one is 100mbps.. please reply bro.. dono ports me se ek port 100mbps ka hai or ek port 1000mbps ka hai.. pr yeh ni pta chl rha konsa kithi speed ka hai.. pls check krke batana yaar
@@onesaturn4946 thanks bro .. im using cat6e.. for second router with full gigbit support and dual band wifi.. so thats why i was confused in ports for gigabit support from this revo router.. thankx again
@@dvindr27bro how was revo router is it good than other router like syrotech,netlink....speed kaisi hai and wifi connectivity and wifi range kaisi hai..??
Hello mate, thank you for the video. I have a question: I see that there is a blue terminal at the end of the yellow optical fibre connection coming from BSNL side. They have given me a similar cable but with a green terminal. From a few unreliable sources, I learnt that the green terminal is a cheaper version of the blue terminal. But I also head that these green and blue terminals can be based on two different technology so each of them will not be compatible with a given modem/router input. I see that your router also has blue input. so, for you, it is good: blue terminal in blue input. I have to buy a modem/router with green optical input but I cannot find it on the internet. Can you please clarify this? Does the blue or green colour of the terminal matter?
Dear mate. I am having bsnl FTTH with ALPION 1143 router . Why wifi is stable and with good speed. Couldn't connect wipro smart plug. Any modifications in modem required. Please advice. Thanks.
Hi Good Day! We have configured the devices and internt is working fine. We wanted to change the router now and new router does not work with same username and pwd. I know mac binding ONU list and ONT configiration. Even I did the derigister with old modem and configured new modem but its not working. Intenet will be up only for the first modem I have configured. BSNL people still did not help so far. I dont know where to remove this binding? why only first device working? and in ONT is it possible to deleted and change? All connections are in single VLAN id - so could not delete VLAN for resetting on ONT. Thanks Kiran
@@kirangs28 No, Collect all the information mentioned in the video from the old modem or from the franchisee. Franchisees normally don't use the mac binding configuration in ONU. Take your new router to franchisee's office. they will configure it.
I am using this syrotech modem As a extender via lan cable for jio fiber broadband is it possible to connect telephone of jio fiber connection to syrotech modem???
Thanks for detailed information. One question how much time it take to get this complete ? And any registration needs to be done from BSNL for Connection? For your information Iam taking new connection from franchise person.
Hi, Please help me . Ive the same revo router with bsnl fibre . Ive several smart plugs and bulbs in the network. But I can't use them directly with my fibre network, I must connect all my smart devices with a JIOFI , and only then it works ,while all the voice assistant Alexa',s are directly connected with the Bsnl Fibre. And router is set on 2.4Ghz only. There is no one in my village who could diagnose and help me with a fix here
2 types of smart devices are there. 1) Internet over communication 2) Local network communication check the devices connected to your router. from router status tab. I am not able to understand your problem.
When I configure the LAN client (i.e my PC) to have a static IP instead of accepting the DHCP IP dished out by the router, the PC is not able to connect to the internet although it is connected to the router. Any suggestions? Thank you in advance
@@onesaturn4946 I have set the IP in ethernet properties. In fact, have been using static IP with CFibernet ISP without any problem. I am having a problem only with my NEW BSNL connection.
in the above reply, the ip & route cmd outputs are with DHCP set in Ethernet properties. TBelow that is the output with static IP settings. I am using Ubuntu 20.x
Sir I want to set time in modem for which wifi will be active so that children can use limited time wifi when we are not at home . Which modem have this time setting
Sir, I have optilink op xt71000n ONT which has similar settings to the one you are using. I want to use use to only connect and access various devices to make it work for home automation using home assistant. The problem I am facing is I am unable to connect or open other devices after connecting to the WiFi network. Also the WiFi goes down when I try to do a simple nmap scan to locate connected devices. What settings should I change? Please help
I don't understand what is your issue. Iam using home assistant, mqtt server in my laptop & esp8266 with this router (dhcp enabled) & D-link 2750u (as extender dhcp disabled). can you send me video bosssirsi@gmail.com
@@onesaturn4946 Nice setup sir. Today I debugged the router using the serial ports(Rx,Tx) and found some below error messages: "wlano-util-err: System Memory reach oom-killer threshold! wlano-other-err: RX DROP: Broadcast storm happened!"
@@PANKAJKUMARKBN These routers are manufactured by Guangzhou Chip Technologies in china. Rebranded and sold in India. Quality also not upto the mark. Broadcast storm - may be it can't process lot of traffic.
@@PANKAJKUMARKBN make factory reset of that router rather then buying new one. I have usb 2.0 router speed is slow not good for playing movie from my external 3.0 hard disk go for any usb 3.0 router with Wifi 5ghz.
Sir i took wifi yesterday srvice man did everything but the telphone light not glowing in router.. neither i can make any calls on landline.. please help he said it will automatically actiavte after 2 days. Is that true? I have to do something jow plz help
Bsnl people have setup up the optic fibre in my house but since i was not having router at that time they cudnt connect and do the configuration...they will come again but dont know when. Can I connect the patch cord with my router and start the connection by myself following this configuration steps? Do I need to pay the monthly bill before doing this configuration?
normally activation and installation process goes same day. first confirm your account activated or not. then collect all the required information told in this video from BSNL officials. Simply follow this video you can configure your router in home.
PON LIGHT is blinking again and again,how to fix that. After got frustrated,I pressed reset button of the router and now everything got deleted. I will do configuration myself but what about PON How to fix it?
I have 100 mbps speed BSNL wifi. My android 11 phone can't get more than 1 mbps from BSNL wifi. I get 80 mbps speed in my laptop. My friend's phone connects to my wifi with 20+ mbps. So I thought it is my phone issue and took it to service center.They connected to Airtel WIFI. It was 30+ Mbps with Airtel WIFI. So they said phone is fine. BSNL operator says "since one phone is getting good speed, there is no issue with BSNL WI-FI". I am not understanding whether it's phone issue or wifi issue. I did factory reset of phone, updated all softwares. Still my phone is not able to grasp Wi-Fi speed more than 1 Mbps. Please help🙏
SIr i have a problem,in my connection both phone and internet is enabled in bsnl FTTH connection. Its a non wifi unit. it has 2 Lan ports but iam unable to get internet while using my Pc or laptop when connected through a Lan cable. Due to which iam unable to connect a external wifi router. Kindly help.
Hi where can I get these VLAN and other required details. Will bsnl customer care will help or any personal portal is available to check these details please respond
Voip Status is registered. But when I ring the phone number, phone device doesn't ring while voip status in router is showing "ringing" as status. I checked the phone elsewhere and no fault with phone device or cables. What could be the issue?
@@onesaturn4946 In my case..phone rings if i call and i can talk but when i try to call with the phone..a dial tone is heard for 1 sec..then silence..if i dial a number..an automated voice says..number does not exist..What to do ?
Iam Using this router- www.amazon.in/REVO-1GE-1FE-1POTS-WiFi/dp/B08TBVX2HL www.amazon.in/Netlink-Antenna-HG323RGW-Compatible-Wireless/dp/B084Z2GQZD www.amazon.in/SYROTECH-1GE-1POT-WI-FI-XPON/dp/B08C5FY6JY/ Dual band routers are best but its Too costly. Not justify its Price over Rs3,000- www.amazon.in/Syrotech-EPON-1110-WDAONT-Wireless-Optical/dp/B08QGHNX2L
@@umaramin92 contact Railwire employees get all information required for configuration. if you take your router to their office they will configure it for you its only 10 minutes work. I think no Charges. after successfully setup, take a backup of configuration for future use
if you follow this video step by step Nothing will happen like that. reset the router and configure again and check "Enable DHCP Server" in Network - Lan IP Address
Hii..they configured my router after installation but after 24 hours still in WAN info internet status shows 'down' And internent not working. What can i do?
Yes definitely you can. First watch video without skipping note down information you required and backup that information from old router. (otherwise you have to collect that information from franchisee or BSNL officals.
After configuration the status is showing 'up' but whenever i make any call there is a message saying 'your access level doesn't allow to use this facility'. any help?
@@srimantabhattacharya1424 GPON port is there and it support ONT. Hardware wise it supports BSNL Ftth. Happy to see Branded company good FTTH router finally arrived for BSNL.
@@onesaturn4946 I contacted local office and they told me to go for syrotech or DBC, as TP-LINK one is newly launched it should take time to get support from BSNL.
@@onesaturn4946 same i saw many methods online. Actually there are many people wo got it working in broadbandforum bsnl if you can check out on google. They have listed many methods and config but alas i have been given huaewi ont sterling model where i cant seems to find anyone who could help me. Its so sad that every private provider like jio airtel provides this but not bsnl. I hope you can research into this bit more to help me out.
Bro my router is also electroline They said admin admin123 But it's not working n saying bad password what should I do? Now Pls help me bro.. Bsnl only gave that credentials but its not working... pls help me
you can set static route but i don't know why it works perfectly in my laptop and old Android 5.0 phone but not working in android 10 phones if you have any good app comment me
sir everything is working properly. Could you please upload a video for SIP setup in router and android phones over wifi !!!
Thanks sir for your genuine guide.all the best
what is the use of port binding in internet cofiguration and how it is done
when i am using mac filter allowlist, i am able to connect to ssid, but not connected to internet, pls explain
What is port binding and why should I disable it? I have 3 routers connected to it.
Bhai Agr aap hindi mei bolte tou like kya subscribe bhi kr deta is pr dubbing kr dijiye bahut useful video hai
time nahi hai bhai..... try karta hoon
How to activation caller id
Because my landline receiving and missed calls not in my landline phone display
Ask in the nearest BSNL office. They have to activate it
How do we limit the bandwidth for selective users? And could you elaborate on setting different SSIDS?
Not possible to limit bandwidth to selective users. You can set different SSID
Router kharab hone se dusra router dusra kuch bhi company ka router khud configuration kor saktahu ki nahi . Router bsnl verified hona mandatary he kiya sir ji
On this revo router. Which lan port is of 1gE and which one is 100mbps.. please reply bro.. dono ports me se ek port 100mbps ka hai or ek port 1000mbps ka hai.. pr yeh ni pta chl rha konsa kithi speed ka hai.. pls check krke batana yaar
1st port (Ge) 1Gbps Must use cat5e or cat6 cable & 2nd port (Fe) 100Mbps
@@onesaturn4946 thanks bro .. im using cat6e.. for second router with full gigbit support and dual band wifi.. so thats why i was confused in ports for gigabit support from this revo router.. thankx again
@@dvindr27bro how was revo router is it good than other router like syrotech,netlink....speed kaisi hai and wifi connectivity and wifi range kaisi hai..??
Hello mate, thank you for the video.
I have a question: I see that there is a blue terminal at the end of the yellow optical fibre connection coming from BSNL side. They have given me a similar cable but with a green terminal. From a few unreliable sources, I learnt that the green terminal is a cheaper version of the blue terminal. But I also head that these green and blue terminals can be based on two different technology so each of them will not be compatible with a given modem/router input. I see that your router also has blue input. so, for you, it is good: blue terminal in blue input. I have to buy a modem/router with green optical input but I cannot find it on the internet. Can you please clarify this? Does the blue or green colour of the terminal matter?
terminal color don't matters much. inside core important. if you are buying go for 5Ghz wifi ac model.
Dear mate. I am having bsnl FTTH with ALPION 1143 router . Why wifi is stable and with good speed. Couldn't connect wipro smart plug. Any modifications in modem required. Please advice. Thanks.
Hi Good Day! We have configured the devices and internt is working fine. We wanted to change the router now and new router does not work with same username and pwd. I know mac binding ONU list and ONT configiration. Even I did the derigister with old modem and configured new modem but its not working. Intenet will be up only for the first modem I have configured.
BSNL people still did not help so far. I dont know where to remove this binding? why only first device working? and in ONT is it possible to deleted and change?
All connections are in single VLAN id - so could not delete VLAN for resetting on ONT.
Thanks
Kiran
your connection is from BSNL franchisee or directly from BSNL
@@onesaturn4946 from bsnl franchisee, these days new type line lease OLT, we have single vlan id for entire olt for internet
So the user id and pwd does not work on any oher moden - only works with this machine.
@@kirangs28 No, Collect all the information mentioned in the video from the old modem or from the franchisee. Franchisees normally don't use the mac binding configuration in ONU. Take your new router to franchisee's office. they will configure it.
bro how was revo router is it good than other router like syrotech,netlink....speed kaisi hai and wifi connectivity and wifi range kaisi hai..??
all of them are similar. they are all manufactured by one Chinese company and rebranded in Indian market.
thank you bro.i got full information
I am using this syrotech modem
As a extender via lan cable for jio fiber broadband is it possible to connect telephone of jio fiber connection to syrotech modem???
may be its possible. But you have to know configuration details.
I am setting for landline I did all according to you but status is FXS register fail Can not access the route what should be done
Thanks for detailed information. One question how much time it take to get this complete ?
And any registration needs to be done from BSNL for Connection?
For your information Iam taking new connection from franchise person.
configuration only takes less then 10 minutes for experts. but you need all required information. BSNL have to activate your account.
@@onesaturn4946 thanks, one last question - how long it will take to get active my account by BSNL.
@@nbk_in mOST OF THE TIME when they come to install its already acivated. So they can check phone & internet working properly.
@@onesaturn4946 okay, thankyou very much for the information ℹ️ bro.
Hi,
Please help me .
Ive the same revo router with bsnl fibre .
Ive several smart plugs and bulbs in the network. But I can't use them directly with my fibre network, I must connect all my smart devices with a JIOFI , and only then it works ,while all the voice assistant Alexa',s are directly connected with the Bsnl Fibre.
And router is set on 2.4Ghz only.
There is no one in my village who could diagnose and help me with a fix here
2 types of smart devices are there.
1) Internet over communication
2) Local network communication
check the devices connected to your router. from router status tab.
I am not able to understand your problem.
NAT configuration, In my router it is set to NAT Type 4. What are these 4 types and its usage?
When I configure the LAN client (i.e my PC) to have a static IP instead of accepting the DHCP IP dished out by the router, the PC is not able to connect to the internet although it is connected to the router. Any suggestions? Thank you in advance
check your Pc's ipv4 address in ethernet properties. Iam using static IP address works perfectly fine.
@@onesaturn4946 I have set the IP in ethernet properties. In fact, have been using static IP with CFibernet ISP without any problem. I am having a problem only with my NEW BSNL connection.
in the above reply, the ip & route cmd outputs are with DHCP set in Ethernet properties. TBelow that is the output with static IP settings. I am using Ubuntu 20.x
Static IP working now. I had to change the DNS setting from automatic to manual. Thanks for your help. Your vidoe was vey useful
Sir I want to set time in modem for which wifi will be active so that children can use limited time wifi when we are not at home . Which modem have this time setting
Sir, I have optilink op xt71000n ONT which has similar settings to the one you are using.
I want to use use to only connect and access various devices to make it work for home automation using home assistant. The problem I am facing is I am unable to connect or open other devices after connecting to the WiFi network. Also the WiFi goes down when I try to do a simple nmap scan to locate connected devices. What settings should I change? Please help
I don't understand what is your issue. Iam using home assistant, mqtt server in my laptop & esp8266 with this router (dhcp enabled) & D-link 2750u (as extender dhcp disabled).
can you send me video bosssirsi@gmail.com
@@onesaturn4946 Nice setup sir.
Today I debugged the router using the serial ports(Rx,Tx) and found some below error messages:
"wlano-util-err: System Memory reach oom-killer threshold!
wlano-other-err: RX DROP: Broadcast storm happened!"
@@PANKAJKUMARKBN These routers are manufactured by Guangzhou Chip Technologies in china. Rebranded and sold in India. Quality also not upto the mark.
Broadcast storm - may be it can't process lot of traffic.
@@onesaturn4946 Please recommend some good WiFi router with USB storage devices and USB modem support.
@@PANKAJKUMARKBN make factory reset of that router rather then buying new one.
I have usb 2.0 router speed is slow not good for playing movie from my external 3.0 hard disk go for any usb 3.0 router with Wifi 5ghz.
Sir i took wifi yesterday srvice man did everything but the telphone light not glowing in router.. neither i can make any calls on landline.. please help he said it will automatically actiavte after 2 days. Is that true? I have to do something jow plz help
some times they take some time to update your account
Bsnl people have setup up the optic fibre in my house but since i was not having router at that time they cudnt connect and do the configuration...they will come again but dont know when. Can I connect the patch cord with my router and start the connection by myself following this configuration steps? Do I need to pay the monthly bill before doing this configuration?
normally activation and installation process goes same day. first confirm your account activated or not. then collect all the required information told in this video from BSNL officials. Simply follow this video you can configure your router in home.
@@onesaturn4946 Thank you so much!
PON LIGHT is blinking again and again,how to fix that.
After got frustrated,I pressed reset button of the router and now everything got deleted.
I will do configuration myself but what about PON
How to fix it?
Pon breaking means your device needs to sync again & again due to a fault in ftth line. or very high Noise in your ftth cable (poor signal)
Account number means landline phonenumber with STD code right ?
How do i get lqndline number
Do I need to connect the rj45 to the laptop for Landline configuration??
no you can configure from your Wi-Fi
Sir how to connect BSNL ftth onu to load balancing router? I have three internet connection BSNL, Jio and GTPL.
I have 100 mbps speed BSNL wifi. My android 11 phone can't get more than 1 mbps from BSNL wifi. I get 80 mbps speed in my laptop. My friend's phone connects to my wifi with 20+ mbps. So I thought it is my phone issue and took it to service center.They connected to Airtel WIFI. It was 30+ Mbps with Airtel WIFI. So they said phone is fine. BSNL operator says "since one phone is getting good speed, there is no issue with BSNL WI-FI". I am not understanding whether it's phone issue or wifi issue. I did factory reset of phone, updated all softwares. Still my phone is not able to grasp Wi-Fi speed more than 1 Mbps. Please help🙏
Take backup then reset and reconfigure router.
@@onesaturn4946 you mean to take backup of router Configuration?
@@sharvarirg984 yes
@@onesaturn4946 Did hard reset. Still my phone Xiaomi 11 Lite NE 5G is not able to get more than 1mbps. With Airtel or jio Wi-Fi it works well
there is wlan b g n options set it to N
Will this work for the Syrotech router which supports ONT, GPON, EPON?
yes it works.
Can you pls explain me why I am getting that " The WAN has not obtained an IP address" in VoIP information tab....???
sometime for registering it takes upto 5 minutes. otherwise something is wrong or misconfigured
right not optand ip in dhcp
Enter the correct VLAN id
Sir, how to change nameserver? Is it possible? I have alphion aont 1143.
Internet connection is working but voice configuration is not working. Its voice status is down and no IP address in WAN connection info page.
follow this video & not down required information and ask the BSNL for that info
@@onesaturn4946 ok. Called bsnl but they said issue with OLT and I called OLT company they said issue with the bsnl
Pls uploaded earth 4222 Genexis bsnl configuration its helpful to all
Is Tp-link XC220-G3v support for bsnl fiber.
SIr i have a problem,in my connection both phone and internet is enabled in bsnl FTTH connection. Its a non wifi unit. it has 2 Lan ports but iam unable to get internet while using my Pc or laptop when connected through a Lan cable. Due to which iam unable to connect a external wifi router.
Kindly help.
Ji
Ii cantdo any anithing
Geip from whom ?
Hi
where can I get these VLAN and other required details. Will bsnl customer care will help or any personal portal is available to check these details please respond
Did you get your details if so where do you contacted to know your details
in my router epon setting it showing registered but not authenticated if u know anything about it pls tell me
☺
Voip Status is registered. But when I ring the phone number, phone device doesn't ring while voip status in router is showing "ringing" as status. I checked the phone elsewhere and no fault with phone device or cables. What could be the issue?
recheck Application - VOIP check line 1 enable or not. Watch this guide video carefully. If problem not solved contact BSNL or franchisee.
@@onesaturn4946 In my case..phone rings if i call and i can talk but when i try to call with the phone..a dial tone is heard for 1 sec..then silence..if i dial a number..an automated voice says..number does not exist..What to do ?
Can you show the configuration for Alphion AONT-1143
username: admin & password: system | configuration is same but Options are not in horizontal tab. this video guide is for all BSNL FTTH ONT routers.
@@onesaturn4946 Yes I’m a BSNL customer only.
@@Mohammad-kg3fs configuration is same. but some options are located in different locations.
Bro I have net plus fibre modem .. can i connect it with bsnl fibre?? (is there any problem with GPON Modem)
i think that is ont router. So it will work.
All the Modem model price list kindly update
Bhai mera internet chal raha hai mgr voice nahi .. voice kase activate karu ..plz rply😊
Which number we need to put in account number section
Your landline number without first zero.
@@onesaturn4946 sir but in my std code there is 0 at start what to do?
@@padmavatibasarkode2615 try without zero at start
bro i type space as username and 1234 as password in loid configuration. what should i do now.
Thanks very much bro how can we see how many devices connected to my router??
in status tab
Can u provide link for best modem for bsnl ftth?
Iam Using this router- www.amazon.in/REVO-1GE-1FE-1POTS-WiFi/dp/B08TBVX2HL
www.amazon.in/Netlink-Antenna-HG323RGW-Compatible-Wireless/dp/B084Z2GQZD
www.amazon.in/SYROTECH-1GE-1POT-WI-FI-XPON/dp/B08C5FY6JY/
Dual band routers are best but its Too costly. Not justify its Price over Rs3,000- www.amazon.in/Syrotech-EPON-1110-WDAONT-Wireless-Optical/dp/B08QGHNX2L
Brother my modem shows IGMP disabled in WAN connection info
How to fix
Bro can I connect external router huwai ,but it's not working, i connected port 1 ,but it is showing user name and password,where I can get?
I am using the same router provided by railwire Internet. Now I want to set up phone service on it. Please tell me how to set up
I think setup steps are same as in the video. But all username password Vlan id are different.
@@onesaturn4946 Are there any service charges for this. And where to get these ids and password
@@umaramin92 contact Railwire employees get all information required for configuration. if you take your router to their office they will configure it for you its only 10 minutes work. I think no Charges.
after successfully setup, take a backup of configuration for future use
Thank you so much for your help
bro how was revo router is it good than other router like syrotech,netlink....speed kaisi hai and wifi connectivity and wifi range kaisi hai..??
After connecting LAN cable,why the site is not opening and 9n cmd command no ip address is showing
if you follow this video step by step Nothing will happen like that. reset the router and configure again and check "Enable DHCP Server" in Network - Lan IP Address
Excellent video
I do the voip configuration it's show up but disable.The password and other information are I got from the service provider
Can we use this in non fiber connection
yes, you can use
Can TP-LINK ARCHER C60 AC1350 router be connect to BSNL fiber nett?
only ONT routers connects to bsnl ftth
primary sip register is same for all user
Sir for 1849 vlan I'd net link modem not registering.
Reconfirm your details with BSNL office or franchisee
Sir only incoming call rings not voice hear .. outgoings call also not work
contact the installer or BSNL
I have 2 network info
And my router using too much data while I am not using the internet
Do anyone have solutions
No idea about this problem
Hii..they configured my router after installation but after 24 hours still in WAN info internet status shows 'down'
And internent not working.
What can i do?
confirm your account activated or not. contact franchisee or bsnl officials
Bhai I long did it took to finally go up, and did u went to BSNL office for it, as I am facing the same problem
@@manishsingh5291 it got activated the same day i just called the agent to let them know about the issue.
Bro. EPON connection status is Registered Not Authenticated. And Rx is -22. I am getting losses while doing Skype and teams calls
-22 is not a problem. up to -27 no need to worry. Recheck the details with BSNL.
In my bsnl fiber outgoing call are going but incoming call are not coming.in my configuration wan connection info igmp status is showing disable
Can u hear dial tone in ur phone constantly when u pick up the handset for more than 1 second ?
Can we change the modem by ourselves?
Yes definitely you can. First watch video without skipping note down information you required and backup that information from old router. (otherwise you have to collect that information from franchisee or BSNL officals.
Thanks for the quick reply
Can we use repeater to spread the connection throughout the house or changing the modem is a better idea?
@@Sabarees-wb9xb Iam Using D-link router as Extender.
can i can use wireless telephone
Yes, Iam using Panasonic cordless phone.
After configuration the status is showing 'up' but whenever i make any call there is a message saying 'your access level doesn't allow to use this facility'.
any help?
where the message is showing? are you using landline telephone or other?
@@onesaturn4946 Landline brother. Not showing. saying.
How can i get my vlan id and username and password where to contact them
Sir how to limit the speed of other users in my wifi pls help in NETLINK modem
No options available
Ok thanks sir
@@moodwriter1994 cheapest router do that work is "mi routers"
I done same but voip was shown as registering..... what next steps to do bro...
Make sure voip Phone number and passwords and Vlan ID are correct.
sometime registering takes up to 5 minutes.
change the server to 10.187.7.12
@@onesaturn4946 10.187.6.12i done same In this video bro,can I change it...bro how can I know v lan I'd...
@@noorahmadpatan1209 bsnl franchisee or bsnl office
@@onesaturn4946 thank you bro......I will go to BSNL office....
Sir, in wifi iam getting low speed. What to do
change
Channel Width to 40MHz. use wifi analyzer app to choose least traffic channel
How to contact you bro ??
Bhai mera router 4 sal se band hai ab chalu karana hai pr vo telefone number mwng rahe hai pr me sab bhul gaya to kaise start kre
contact your service provider.
How can we reset all settings of wifi❤
can we change band from 2.4G to 5G for bsnl fiber
No
Can TP-LINK XC220-G3v
AC1200 Wireless VoIP GPON Router be connected to BSNL FTTH?
No idea about this router.
@@onesaturn4946 it is newly launched,thanks anyway.
@@srimantabhattacharya1424 GPON port is there and it support ONT. Hardware wise it supports BSNL Ftth. Happy to see Branded company good FTTH router finally arrived for BSNL.
@@onesaturn4946 I contacted local office and they told me to go for syrotech or DBC, as TP-LINK one is newly launched it should take time to get support from BSNL.
Hi bro can we use nokia g2425g-a with bsnl ftth.
I hope it will work
Thanks dude
Bro when i configured the status shows regestring .. what to do
It takes 10-15 minutes.
How to Setup wifi calling sip method ?
I don't know why BSNL sip not works correctly. it worked on my laptop but not on my android 10 phone. worked on android 5.0 old phone
@@onesaturn4946 same i saw many methods online. Actually there are many people wo got it working in broadbandforum bsnl if you can check out on google. They have listed many methods and config but alas i have been given huaewi ont sterling model where i cant seems to find anyone who could help me. Its so sad that every private provider like jio airtel provides this but not bsnl. I hope you can research into this bit more to help me out.
@@sunnylivingit i will try
@@sunnylivingit I can help if you want.
I also have a video in my channel for SIP calling
@@byavarsi ok i will c ur vid
Bro why mine was showing enable and down ?? The service provider was also tried but still it was showing enable and down any solution for this
watch the configuration compare it with your configuration
my rx power over -20dbm is it good?
yes it's good
Sir how to change pon serial number on netlink ont
what is the username and password for electroline router??
same as REVO router
Bro my router is also electroline
They said
admin
admin123
But it's not working n saying bad password what should I do?
Now
Pls help me bro..
Bsnl only gave that credentials but its not working... pls help me
Bro have u got username n pass of electroline bsnl? Pls tell me
We can use bsnl voip on mobile without landphone
you can set static route but i don't know why it works perfectly in my laptop and old Android 5.0 phone but not working in android 10 phones
if you have any good app comment me
@@onesaturn4946 ZOIPER
@@onesaturn4946 you can only use one time on one phoe
@@shahinsha i tried most of the apps but not working
@@shahinsha No. if you are on call in landline at the same time you can receive another call on your laptop
Bro on my device it shows igmp enable but status down
recheck network- Internet - service mode
What will be the password for landline number?
Secureye wifi ka liya password he
Thanks ❤❤❤🎉🎉
Pleas make video bnsl fiber connection Genexis modem configuration phone call laptop and mobile
i don't know why BSNL Voice SIP only works sometimes on my Laptop and old android 6.0 GsWave app. Never worked on my Android 10 phone.
Bro my modem change the ssid and password automatically after I unplugged.pls help me bro🙏
Reset and Re-configure router as shown in the video. Follow this video without skipping a single step. then go to maintenance - Save and reboot
Same prblm also for me ...reset nd login change settings...after changed wifi automatically changed to old password 1_8 ...pls help me
I tried 3times password change ...then again automatically changed to 1_8password
same problem
Bro I have bsnl broadband fiber 2.4 G.
I wanted wifi range should be like too small and to fast internet speed.so in that case how to configure bro
buy a 5ghz or 6ghz router.
@@onesaturn4946 bro in 2.4g router can't make short range distance?
@@musicloud5236 hide your ssid
@@onesaturn4946 only hiding is possible bro ?
@@musicloud5236 yes
everything is correct but internet status shows down
reverify vlan, Username and password with BSNL.
@Sujith contact BSNL JTO
சார் vlan id no- கஸ்டமரிடம் கொடுக்க மாட்டார்களா.
Sir how to configure optivision ftth modem for bsnl
Tp-link TL-WR740N bsnl fibre broadband connection ????
I have accidentally change the pppoe username and password after that my wan status showing down. How can i fix that
Did your problem fixed can you tell me how it has been fixed whom you contacted
@@kesavarman4649 can you tell me?
Can you tell me how did you fix it?
How to change the DNS in PPPoE?
Bro same router but company name is techNXT please tell me about the default pass ....
I think it's better to ask your franchisee. most of the router from that company comes with TV RF.
What is for dbc
DBC username password IP address added in description. Check the description now
My Wan status is shown Down .....user I'd and password wt I will enter their in network settings???
I can't understand your problem.
@@onesaturn4946 wan status is shown down.Then what to do for status shown UP....
@@shaikvassi8898 take your router to franchisee's office.
Sir my NAT type is strict please help.