I have one and it actually works very well for what I bought it for which is phone repair. It will heat up a back ( or front) glass enough to remove it. I can't speak for anything else
I bought one of these came yesterday its fine for heatshrink thats it but can only be run for ten minutes then needs to be switched off to cool down or it will melt.
Seems useful I've always used hairdryer to heat-up glue and it takes a while this is kinda cheap so i might buy 1 useful vid:) (not the part where u de-solder 3:40 and try melting lead lol 2:20)
@@CTZN1 Yes, look it up. It's a cheap and plentiful material. Very common in China. It was used in heaters, hair dryers and so on in the west as well in the past and then banned. But China still hasn't banned it. That's another reason I try to be careful about Chinese products.
@@CTZN1 From what I have found searching online, it can be pretty much impossible with a naked eye. If you look it up, asbestos heater elements look very similar to non-asbestos. I guess maybe with a high magnification macro lens or a microscope. There are also labs that specialize in this, but I haven't tried them. For now I'm just using mine with the hope that it's not blowing asbestos all over my room :D
It can be useful for removing lcd smart phones and also for 8 pins ic even mor pins by the way is good for smd components ofcourse if you make the outdoor of heating smsller it means more tigh which can make the heating stronger for removing components!!!
Akhirnya, I found what I was looking for, thank you, I was looking for this to open the Honda Vario motorcycle headlight head, but it doesn't seem strong enough to melt the glue because the glue on the lamp head is very strong.
if you can add a thermo-couple to prevent the melting point of the plastic body, will be great, i liked the content of this videos, thank you for sharing.
I have one and it actually works very well for what I bought it for which is phone repair. It will heat up a back ( or front) glass enough to remove it.
I can't speak for anything else
Can i have a separate switch for the heating element and just use the blower function??
I bought one of these came yesterday its fine for heatshrink thats it but can only be run for ten minutes then needs to be switched off to cool down or it will melt.
V9pp0
can it might be use in removing smart phone LCD?
Yes
can it remove charging pins
@@jctechvlog yes it's My Question ?
@@jctechvlognope
There is no thermal switch and thermal fuse on the nichrome wire. Nor a current fuse on the input. This is not safe. Be careful everyone.
It's recommended to use no more than 10 minutes continuously by the specifications in it.
Can it make plastic bottles shrink?
Absolutely wonderful testing i love it
I like the way Hooby Electronic India reviews products that are always open to see the components inside😁
Thanks I am not from india Btw.
@@LahisTechLT sorry sir
@@LahisTechLTwhere are u from
Is it work on pcb
Very good testing
You can use this for ic like WTR2965?
I was wondering was socket did you use and were did you purchase it from?
They are on eBay for around 12 to 15 dollars
How to buy green megarment seat in this video thembeil
It's avilable on Ebay, Banggood, etc ruclips.net/video/SEojo38w0rA/видео.html
Seems useful I've always used hairdryer to heat-up glue and it takes a while
this is kinda cheap so i might buy 1 useful vid:) (not the part where u de-solder 3:40 and try melting lead lol 2:20)
Is that an asbestos heating element? If so, that seems like a major hazard.
Whut? Asbestos?
@@CTZN1 Yes, look it up. It's a cheap and plentiful material. Very common in China. It was used in heaters, hair dryers and so on in the west as well in the past and then banned. But China still hasn't banned it. That's another reason I try to be careful about Chinese products.
@@4nlimited3dition_4n3d how to differentiate them? I have mine and it looks like some PCB board thing
@@CTZN1 From what I have found searching online, it can be pretty much impossible with a naked eye. If you look it up, asbestos heater elements look very similar to non-asbestos. I guess maybe with a high magnification macro lens or a microscope. There are also labs that specialize in this, but I haven't tried them. For now I'm just using mine with the hope that it's not blowing asbestos all over my room :D
@@4nlimited3dition_4n3d oh you also have this product too? Me too ahahah
It can be useful for removing lcd smart phones and also for 8 pins ic even mor pins by the way is good for smd components ofcourse if you make the outdoor of heating smsller it means more tigh which can make the heating stronger for removing components!!!
Like a nozzle perhaps... 😀... Focus it to a narrower point... 😁
u need put Flux For Soldering Solder Paste it will quickly heat and remove fast.
Akhirnya, I found what I was looking for, thank you, I was looking for this to open the Honda Vario motorcycle headlight head, but it doesn't seem strong enough to melt the glue because the glue on the lamp head is very strong.
Use a haidryer
jadinya gimana bang? bisa ga buat buka reflektor motor?
Price
Link open nhi ho rha
Mak sudnya apa d bongkar d pasang lagi
Dia lg review brang nya
Todos os vídeos do RUclips são bons mas o problema esses esses anúncios que atrapalha
What modification did you make that increased his temperature? I stopped the video and came back and couldn't see it. Thanks.
I didn't do any modification.
इसका प्राइस क्या है
Try replace with glow plug 12 v.i watch other channel works..gud ist thatch
if you can add a thermo-couple to prevent the melting point of the plastic body, will be great, i liked the content of this videos, thank you for sharing.
Sir price
110V~220V/300W！在台灣稱之熱風槍！
Where I can get coil..?
I bet I can rework this.... 😳
jika PCB sederhana tidak bisa dibongkar itu sampah
Almost bought one...
Why dont you use your own voice to communicate?
SAYAN DALAL this way is better.
Because his videos will have greater range. Everyone from all languages will be able to do his projects.
🎉🎉🎉
looks
Holy shit that thing is so cheaply made and the outside cover hides it well
Ok
JITu. Ok
Its not successful item failed 😂
It's bad product
Ok
Ok