The Ultimate Samsung NX-300 ISO Test (low-light conditions)

Поделиться
HTML-код
  • Опубликовано: 16 янв 2025

Комментарии • 44

  • @lonniesfilmmaking333
    @lonniesfilmmaking333 8 месяцев назад +2

    Lol still better than a lot of modern day cameras 😂
    Cheers much 😊❤

  • @Aviatorspot
    @Aviatorspot 7 лет назад

    Great comparison! Sony A 6000 series can take 1080p at 60p/50p also. why you didnt film above iSO 3200 ?

  • @milangbg100
    @milangbg100 11 лет назад +1

    Bästa kameran nx serier

  • @sfrerku
    @sfrerku 9 лет назад +2

    Hi I have a question, does it overheat when used a lot? There's a sony camera that even shuts down when it gets too hot...(Nex 5T)

  • @MichaelKincaiddontroughit
    @MichaelKincaiddontroughit 10 лет назад +2

    Nice, exactly the review I was looking for... 1600 was my favorite. Picking up this or the Sony a5100 soon! Need something that shoots well in low light.

    • @davidconsumerofmath
      @davidconsumerofmath 10 лет назад

      A5100 will be better in low light for sure, especially with a focal reducer (I got mine for just US$100). It ends up even better at low light than a Canon 5Dmk3!

    • @MichaelKincaiddontroughit
      @MichaelKincaiddontroughit 10 лет назад

      How did you get so cheap!? I was about to pull the trigger on the a5100 and the sales lady thought she saw the a6000 in the back about to be put on the shelf for sale as a open box item, I picked it up for $499, $100 cheaper than the a5100!

    • @davidconsumerofmath
      @davidconsumerofmath 10 лет назад +1

      Nice deal! The A6000 was also on sale body only recently for US$450
      I find the A5100 to be a better camera to film with, except the EVF and a minor issue with overheating relative to the A6000

  • @thestreetofmangosteen2989
    @thestreetofmangosteen2989 11 лет назад

    Why my nx300 should be auto in video mode?

  • @aldovelasco5308
    @aldovelasco5308 11 лет назад

    Could you tell us about the lens used and settings?

    • @macadamiaq
      @macadamiaq 4 года назад

      yes, could you tell us about the lens used and settings?

  • @ArchivoZSeries
    @ArchivoZSeries 11 лет назад

    How do you change the ISO while recording video?

    • @Kostas_Panagias
      @Kostas_Panagias  11 лет назад

      I don't! I stop, change ISO and start recording again...

    • @ArchivoZSeries
      @ArchivoZSeries 11 лет назад

      Well, I mean, what mode is the camera set in to change the ISO on video recording? When I try to change the settings and then record, ISO is always on Automatic.

    • @Kostas_Panagias
      @Kostas_Panagias  11 лет назад

      Archivo Z You can change mode from P (Program = Auto) to other modes i.e Shutter Priority, Aperture Priority or Manual. Just press the Fn (Function) button and navigate in the relevant option.

    • @Kostas_Panagias
      @Kostas_Panagias  11 лет назад

      Archivo Z In this particular example I had the camera in A (Aperture priority) but also in other modes (Manual and Shutter) you can change the ISO value BEFORE starting the recording (press the FN button and go to ISO). While you record video you cannot change the ISO value.

    • @zvxcvxcz
      @zvxcvxcz 10 лет назад +2

      Kostas Panagias
      Archivo Z
      Kostas, maybe there was a firmware change or some other setting needs to be changed, but at least for myself (current firmware), only Manual allows the iso to stay at what it's set in video, even Aperture and Shutter priority have the iso switch to auto when I start the video.

  • @jack253
    @jack253 10 лет назад

    Judging by the photos on Flickr with the Samsung, I'm kind of in a pickle here from choosing the Canon 1200D to the Samsung NX300. Money isnt the issue but all I'm worried about is whether that would the Samsung NX300 would give out any flare when taking pictures at night within the headlamps and passing cars and what not.

    • @davidconsumerofmath
      @davidconsumerofmath 10 лет назад

      NX300 is a vastly better camera than the 1200D, and cheaper too right now!

  • @technologyrethinked
    @technologyrethinked 10 лет назад

    I don't like the flickering of the lights and from iso 1600 the noise is noticeble

  • @crossbossman
    @crossbossman 9 лет назад

    What lense

  • @milliemil26
    @milliemil26 10 лет назад

    Which lens did u use?

    • @Kostas_Panagias
      @Kostas_Panagias  10 лет назад

      If I remember right, that was the kit lens (18-55mm f/3.5-5.6 ED)

    • @milliemil26
      @milliemil26 10 лет назад

      Thanks

    • @blackhollywood8233
      @blackhollywood8233 9 лет назад

      im using the same Camera but cannot get enough light in clubs and bars.. need help

  • @kati6336
    @kati6336 10 лет назад

    Η NX 300 εχει επιλογη για φίλτρα όπως οι NIKON?

    • @Kostas_Panagias
      @Kostas_Panagias  10 лет назад

      Τι εννοείς φίλτρα; Μπροστά από το φακό πολωτικά, ND Κλπ; αυτά εξαρτώνται όχι από την μηχανή αλλά από τη διάμετρο του φακού (τον αριθμό φ). Ξέρω ότι και η Samsung φτιάχνει δικά της φίλτρα αλλά νομίζω ότι δεν έρχονται Ελλάδα επομένως μπορείς να πας σε μία λύση third part (π.χ. HOYA) ή να ψάξεις για της Samsung είτε μέσω ebay/amazon Κλπ είτε εάν κάποιο μαγαζί από τα φωτογραφικά τα φέρνει (χλωμό το τελευταίο να σου πω την αλήθεια).

  • @JorgeRodulfo
    @JorgeRodulfo 11 лет назад

    How can I do this ?

    • @Kostas_Panagias
      @Kostas_Panagias  11 лет назад

      What do you mean? The test? Just shoot a short clip with the same aperture and shutter speed but different ISO Settings.

  • @onisis88
    @onisis88 10 лет назад

    Γεια σας, θα ήθελα να ρωτήσω ανάμεσα στη Νικον D3200 και αυτήν ποια θα προτιμούσατε;Μέχρι τώρα είχα μόνο compact αλλά αγαπώ πολύ τη φωτογραφία και θα ήθελα να εξελιχθώ!Είμαι ανάμεσα σε αυτές τις δυο αλλά έχω μπερδευτεί!Θέλω να έχει πολύ καλή ποιότητα στις φωτογραφίες και τις βραδυνές!Μήπως θα μπορούσατε να με βοηθήσετε;

    • @Kostas_Panagias
      @Kostas_Panagias  10 лет назад

      Αν έχεις συνηθίσει σε compact τότε ενδεχομένως να σε βολέψει λίγο καλύτερα η NX300 λόγω σχήματος και μεγέθους. Φωτογραφίες καλές θα βγάζεις πάντως και με τις δύο μηχανές (και μέρα και νύχτα). Εγώ προσωπικά προτιμώ μηχανές που έχουν προσοφθάλμιο (είτε οπτικό είτε ηλεκτρονικό) για να "καδράρω" από αυτό και όχι από την οθόνη, αυτό όμως είναι καθαρά θέμα γούστου. Για το λόγο αυτό δε μπορώ να σου προτείνω τη μία ή την άλλη μηχανή. Θα σου πρότεινα να πας σε ένα μαγαζί και να τις πιάσεις και τις δύο για να δεις ποια σου "κάθεται" πιο καλά στο χέρι σου. Είναι σε μεγάλο βαθμό υποκειμενικό το θέμα, διαφορά μεγάλη στη ποιότητα φωτογραφίας δε θα δεις (αν τις βάλεις σε ένα εργαστήριο και τις δύο και αρχίσεις τα πειράματα οκ τότε θα μπορείς να βγάλεις κάποιο συμπέρασμα - αλλά νομίζω αυτές οι συγκρίσεις δεν έχουν και πολύ μεγάλη πρακτική αξία και στη τελική αυτό που μετράει είναι αυτό που εσένα θα βολέψει καλύτερα).

    • @Kostas_Panagias
      @Kostas_Panagias  10 лет назад

      sorry κιόλας για την καθυστερημένη απάντηση!

  • @vhs_goldstar
    @vhs_goldstar 10 лет назад


    My NX300 shoots only 50p maximum. :-(((((

    • @Kostas_Panagias
      @Kostas_Panagias  10 лет назад +1

      If you change mode from PAL to NTSC (American/Japanese System) you will get 60p. Beware though: if you watch those videos on a TV you may get weird motion; if you watch them on a computer you will most likely be ok. Still at 50 frames per second, motion should be quite "fluid" and jadder-free so it's ok to shoot at that framerate.

    • @vhs_goldstar
      @vhs_goldstar 10 лет назад

      Thanks Kostas, i've checked that.
      But i got another two questions for you:
      1) Do i understand right, that x0,5 slow recording mode is the same as 50p slowered up twice to 25p in Adobe Premiere? And when i place it in Premiere i can make 50p back?
      2) My NX300 dont wanna change an ISO setting for video no matter what i do. Its always "auto". I can put 200 before in any mode, i turn on video rec and its always auto, i can put 800 and its auto. Damn!?

    • @zvxcvxcz
      @zvxcvxcz 10 лет назад +1

      Jura Zaz
      I don't use Premiere, but I think that your are correct about that. About the auto iso, you're using the camera in Aperture Priority aren't you? I believe that you need to be in Manual for the video to use the iso you set.

    • @Kostas_Panagias
      @Kostas_Panagias  10 лет назад

      Jura Zaz About Premiere you are right more or less... Maybe by using the software you get a little bit more control on the process (or you can use After Effects instead to control motion blur better for example). For manual ISO settings you need to change the Mode from "Program" to "Manual" (perhaps in other modes i.e. Aperture or Shutter Speed you can also change ISO).

    • @Kostas_Panagias
      @Kostas_Panagias  10 лет назад

      Jura Zaz by the way, sorry for responding late but I had a few issues with my PC.

  • @thestreetofmangosteen2989
    @thestreetofmangosteen2989 11 лет назад

    Why my nx300 should be auto in video mode?

    • @Kostas_Panagias
      @Kostas_Panagias  11 лет назад

      The camera is in P Mode (Program Mode) by default. If you want to change it to other modes (Shutter, Aperture or Manual Mode) you need to press the function button (Fn) and change it from there.

    • @thestreetofmangosteen2989
      @thestreetofmangosteen2989 11 лет назад

      but when i click the record button... the video become dark... please teach me MASTER!!! thank u so much!

    • @Kostas_Panagias
      @Kostas_Panagias  11 лет назад

      izar masuri If the video becomes black then you need to change exposure either by lowering the shutter speed or opening the aperture (or both!). You can also select a higher ISO value (but with degradation in video quality). Moreover, if you want to have a preview of the exposure before recording video or taking pictures you will have to change the framing mode within the camera menu to "Off".