STRAIGHTLINE PERFORMANCE MUFFLERS! ULTRA LIGHT VS LIGHTWEIGHT! WHICH IS LOUDER?!
HTML-код
- Опубликовано: 5 окт 2024
- Again this is just to show comparison of the two models. I am not condoning the use of aftermarket mufflers just here showing the difference !
South Side Sales - Power Equipment, Snowmobiles, Mowers, Tractors and More
546 Curran Hwy - North Adams, MA
Phone:413-664-7111
Instagram- JesseJames322
FaceBook- Jesse James Bonaduce
Nice space savings.Great swag jacket too
love the jacket! Been wearing it non stop!
I bought the quiet trail can, haven’t installed yet. I did use Jesse’s code, saved me some cash!!!
love to hear that Ed!!!
I never put an exhaust on any of my sleds. But always put one my quads and dirt bikes. The sleds have good power right out of the box.
these are not for more power. A good one like i run breaks even but you loose 8 lbs
I run a stock mod on my turbo. 3 inch straight pipe through the stock exhaust. It's never really loud until you slam the hammer on a big straight away.
sure the turbo works as a silencer!
I always put aftermarket exhaust on all my vehicles/toys. My mustang has longtubes with a corsa catback 👍 If I do end up buying a sled I'm going to be way to tempted to throw a can on it
i would not put a loud one on it for sure. really is an issue for closing trails and upset land owners
@@JESSEJAMES322 the majority of my riding would be around my farm on my own private land and the neighbors. There wouldn't be anyone around me for miles however I would maybe like to travel and ride some Trails so I wouldn't go with a loud can
Good morning Jess sorry this has nothing to do with this video but I have a technical question for you ,are the drive sprockets on the drive tube supposed to be centered? I know the space between is 5 and a half inches but they look like they should be on the center of the tube?I've had crazy track alignment issues for 4 years if I got the back centered the track would be off center in the front of the track if my driver's are supposed to be centered I found my issue my plastic drive sprockets are 3/8 of an inch off center but before I moved things around I wanted to make sure there not supposed to be offset,I couldn't even get the info from the service manual because Polaris doesn't replace sprockets only the whole tube any help would be appreciated thanks 👍
so i dont know the exact answer for that. best advice i can give is watch the video below of me and Chris changing my drivers last year and visually seeing where they are.
ruclips.net/video/Fp4CZol2fLQ/видео.html
Jesse the quiet can should be ok to run in Vermont?? That has anice crisp quiet note.
I would say yes but I am Not the cop stopping you. Really case by case with each law enforcement officer so I’m not sure
Do you also run the slp y pipe and big pipe as well as the muffler or stock with the slp muffler?
i have before and all runs great
Do you ever get a studder out of engine with the cans any codes pop up when running have you logged on many miles with the cans many cans always seem to throw engine codes and spit and stutter at times
nope. no stutter no check engine lights no nothing!
Yessssss!
always!!!
I like the sound and the weight savings of the quieter can you run (8lbs savings I think you said). I would like to replace the stock can on my '22 Khaos 850. Which can are you running and would you recommend it? Basically I don't want any negative performance effect and am fine with 0 HP increase, I just want some weight savings.
i am running the can that is STRAIGHTLINES quiet can that is SAE approved which the one i reviewed in the video. Not much louder then factory but save the weight!
That’s what I’m talking about, sounds like a nitro RC car
really does
Michigan righting tickets if not stock can't run it I'm glad.
everywhere writes tickets for them