強くて軽いブラケットの作り方。How to make light and high-strength brackets.

フレームにパーツを取り付けるためのブラケット。単純なパーツですが軽くて耐久性の高いブラケットの製作は、意外と手間がかかります。Brackets are used to attach parts to the frame. Although a simple part, the production of light and durable brackets is surprisingly time-consuming.
46works Official Goods Shop(Tシャツ販売中)
46works.booth.pm/
Sub-channel 46works LIFE (サブチャンネル 46works LIFE)
/ @46workslife96
チャンネル登録はこちら↓(Please subscribe)
/ @shiroh73
46works.net
/ 46works
/ nakajima46
/ 46works
#custombike #46works #CafeRacerBuild

[@ちゃんひめ-z9v]

46さんのお仕事はホントに丁寧で、テロップには出てこないですけど、ブラケット裏側のボルトの向きがちゃんとしてたり、単に穴あけするにも先ずはセンタードリルで位置決めするとか、そういうところも作品同様に素晴らしいと思います。それにいつも作業場がキレイ。大事ですね。

[@55ken3]

コストは掛かりますが、とても丁寧なお仕事で感心しました。
素晴らしいですね。

[@nixda2179]

I always use a countersunk screw to center the nut over the hole.

[@Alanbataar]

Very nice! I use the same process, except I've stopped using standard plated nuts: my local industrial fastener vendor sells bare, un-plated nuts - I keep a small quantity on hand for welding. More recently, I purchased nuts which are designed specifically for welding. They come in a variety of shapes. I've chosen a wide flange which can easily be modified to fit inside square stock. They work great, and the weld heat never damages the thread.

[@つくしろーど]

溶接は何度も同じ場所にやり直し出来ないし。一発で決キメる🤩………凄い職人技👍

[@T23_Tatsumi]

僕のバイクはハーレーなんですが、純正のステーは
穴開きの板がペッとくっついてるだけで溶接もボテボテです。
46さんのステーの方がずっと純正のようで
とても機能的美感がありますね。
勉強になります。

[@impactodelsurenterprise2440]

when u start the tig i automatically averted my eyes from the monitor

[@keyakipark]

ボール盤主軸の回転音や、フライスの切削音が、BGMと相まって癒やされましたー😆

[@ChunkehMunkeh]

Looking forward to seeing the rest of that Triumph build.

[@sanjkustoms9122]

Tappered bolt idea is good. Thanks

[@rene-yvescote3954]

Wow I see that you are working on a OIF Triumph. Are you going to film the built and show and post it on your channel?

[@作田周一]

いつも丁寧で綺麗な仕事が見ていても大変気持ちよく感じます

[@potteringood]

どこにでもある材料で最高に機能的なモノづくり！！これぞプロですね！！めちゃ参考になりました！
いつも動画楽しみにしてます！！

[@jerrytrueblue]

Ahhhh Shiroh! Nice design work from the humble square tube, sort of universal and custom fitted too. Thank you inspired again. Jerry In Everett Ontario Canada

[@irineumf]

It seems to be simple parts of the motorcycle, but essential for easy assembly and durability. As always, nice to watch your videos, very relaxing. Greetings from Brazil.

[@るんるん-y8r]

これは芸細👍

[@tonypeters8298]

It's quite relaxing watching a master at work! Nicely done Sir.

[@muhafizmahamad5519]

eager to watch mr.shiroh works 👍🏼

[@nellaRissa]

when a simple bracket becomes a piece of craftsmanship you're in safe hands

[@zardportugal]

Much better than factory ones.
Confrats.

[@roodlum]

Making simple parts well is so satisfying! Nice tip to use a tapered bolt. Keihin CR carbs on a triumph twin?? That's cool.

[@walterpascolini7619]

Molto bello è un piacere vederti lavorare, mi rilassa e mi diverte penso di aver guardato tutti i video, anche io sono molto appassionato di questo lavoro, e ho qualche progetto in mente.🤞

[@leonardofurlan7034]

que belo trabalho amigo...parabens😀

[@tsoft856]

love the detail

[@tranquiloukiricou3705]

So many time for a perfect piece ! Very nice !

[@AboutTheBuild]

Awesome stuff, I have the same centre punch 👊

[@921CustomWorks]

👍 thanks... btw what bike is this ?
stuffs looking interesting

[@zumababe8404]

1:21 what pencil is it?

[@peterkoch2759]

lot of good jobs, well done!

[@nomadav7397]

A master of details; great job 👍

[@casventures]

Hi Shiroh! Nice work, again! It’s inspiring and relaxing to watch you work. Off topic question, why did you add a separate oil tank to an oil in frame Bonneville? Will you make a video of this bike?

[@わんわん-s6j]

お、自宅でもできるかなって思って見たらフライス盤やらtigやら出てきてなんの参考にもならんかったｗｗｗ

[@jameshisself9324]

Beautifully illustrated bracket process. I hope we get to see more of that Triumph.

[@michaelriccio2164]

big master!!! comba!!👍👍👍

[@pierrevilliere7921]

beautyfull !!! magnificent !!! you re the best !! if you need an apprentice I'm here !! 😀😀

[@AdamNZ]

That would’ve taken me five minutes to draw up in solid works and five seconds to cut it out on a waterjet.

[@DIEZ919191]

Great!

[@mifiwu1205]

Hmm, it looks like a bit over complicated proces for me, it's a just piece of bent sheetmetal, easy to make with basic tools. On the other hand such a design is used common in series production motorbikes and looks a bit too standard in custom built motorbike.

[@chaiwatpotichanid]

จริงๆครับผมอดีตแฟนเก่าค่าแชร์..🥰🥰✌

[@studiothecave7541]

perfect.

[@ShamWerks]

Bad Obsession Motorsport would approve. 👍

[@lohikarhu734]

ok, but i don't have any of those tools...no mill, no cut-off saw, no TIG.

[@rickfazzini22]

Did I miss an episode? Are you building a triumph??

[@Markko1986]

Dear Lord, that's a lot of work.

[@Tfr2135]

You can do this way faster with a sheet metal brake. Drill and tap the hole with a flowdrill.

[@ishakdinka16]

Marocco ❤❤

[@dwiyantasaputra4883]

Nice

[@mahdirazman2563]

👍nice

[@zx11blaze78]

溶接はロウ付けで代用可能、鉄板の形はグラインダーで切り出し可能。ホムセンのバイスや電動工具が有れば同じ物が作れる。
後は個々人の腕次第。

[@tomvoxx4082]

👍👍👍👍👍

[@gilangup]

👌👌👌👌👌👌👌

[@danl.4743]

What voltage do you have over there? 240v? Send me your address. I am willing to send you a bright light bulb for your workshop. 😉

[@Гарячий]

естетичне задоволення.

[@zx11blaze78]

ブラケットのネジ穴位置は、フレームの芯とかそれと接続するカウルやらの位置から逆算し、寸法を自分で見つけ出さねばならない。いざ溶接してみたら部品の位置が合わずに付きませんでした、なんてね。
これも、個々人の腕次第。

[@jimmymachauer2160]

"promo sm" 🌷

[@PeterNetped]