Idk if it’s because I’m on a 100 pop atm but my fps just went from 80-90fps to 170-180 fps, also enabled xmp on my memory tho 2133 - 3600 so maybe that’s also something that effected it
@@dareplejer6063 got a 2070 super, 32g of 3600 speed ram and just got a ryzen 7 5800X. Before watching this video and changing my ram speeds I was sitting around 60-90fps on max pop servers now it’s an average of 120-140 on max pop servers, barely falls below 100fps! Before I got the new cpu (ryzen 5 3600XT) I was averaging about 60-70fps(while recording and using 2 monitors) just goes to show how cpu bound rust is
@@SmidzOg Can you explain what this xmp setting is? I have a 2070 super, Ryzen 9 3900x, 64gb DDR4 ram which I think is 3400 or 3600. Yet I barely get over 100-110 only in some areas.
The restore point just saved me from nuking my main drive. So basically, I was following your guide. And at the Nvidia GeForce Experience software, I tried installing the newest drivers. But little did I know that it would softlock my pc, and then when I restarted it, I would be unable to even reach the sign in screen, even when I booted in safe mode. But I found how to access the restore point and now everything is back to normal lmao. Thank you random rust youtuber.
Hey Bacca! I just tried to follow this guide step by step from a Rust that I haven't tweaked on my new machine. I gained around 10-20 steady FPS on a highend computer, and not only that, it feels smoother. No screen-tearing is what makes it feel so smooth. Thanks alot for putting this guide out here! Hugs all the way from Sweden
a guide that actually works, goddamn, just went from 50-60 in high pop to 90-120 fps. thanks a lot. just a heads up, setting max gibs to 0 still gives you gibs sometimes, so just do effects.maxgibs -1 in console for no gibs ever
I saw a very noticeable increase in my fps and also following these settings helped me to stop extreme lag fps drops when looking at certain objects such as TC's and looking the general direction of object heavy monuments such as launch site and large oil rig. Thank you very much very helpful guide.
if you have fps problems when looking in a certain direction try turning on/off occlusion culling. I think it's in the experimental tab in the options.
Thanks a lot for this guide! The FPS gain was sadly insignificant, however overall the experience did become a bit smoother and a bit more responsive with less freezes/fps lag spikes and random delays.
What cpu you got? Only makes a diffrence if you have extra cpu usage to spare I guess, I saw at the start when he had lower fps he also had like 20 % less cpu usage
@@KaiMagee19 You are right, I do need to upgrade my CPU as it's not just old but also designed for multitasking instead of single core performance (AMD Ryzen 7 1700). I am thinking of replacing it with Ryzen 5 3600X or Ryzen 5 5600X or Ryzen 7 3800X, once I manage to save up some money.
Full screen isn't just about more FPS, which is negible 1-5fps most times if that. What it truly does is removes latency to the game, because your PC is focused on the game. In borderless, the game wont take priority always over other programs. So introduces possible input lag or screen delay(which is alot harder to notice), depending on your setup.
So all these people in the comments saying, “ I can’t get anything above 170fps” but they only have a 144hz monitor, it doesn’t matter how good you optimise your game you still need a monitor to go with it, just a heads up. 😁
You can notice a difference with 60FPS 60Hz and 200FPS and 60Hz. I'm pretty sure it's more of a responsivnes thing tho. But it still makes huge difference Linus did nice video about it testing various Hz monitors/FPS with different people and found that pretty much everyone performed better and felt increase in FPS above monitor refresh rate and biggest jump was between 60 to 144hz after that not many people could recognize which is which (144hzvs240hz).
If you have an issue with other games just showing a black screen after using these settings, just go back into NVIDIA Control Panel and change your Vertical Sync. I'm not sure which settings is best to put it on, I just put it as ''On'' when playing other games.
Vsync removes screen tearing, but increases latency and caps your frame rate to your monitor refresh rate. I recommend it off, but it’s your own preference.
Didn't really gain any fps at all but this got rid of all of my lag spikes which is pretty nice. I'm guessing the people saying that they got double the fps were on really high settings before and have good pcs
if you are g-sync compatible while using a nvidia card using your native resolution aka the max res for your monitor; it will give you more frames and quality
Thanks, much more stability in the game after the settings. Also upgrade your ram, rust needs up to 15 gigs of ram and if you are running windows, it takes about 5 gigs as well, so you are short. Good luck mate.
i’m actually getting less frames from this but it runs smoother and consistently. but i had my game on max everything and i was reaching 140. now i’m reaching 120
but it definetly depends cuz i used to overclock alot and nothing really changed only fucked my pc up, its worth a try but it depends on your pc and some other shit
Definitely didn’t double my fps but made me improve it by like 10-20 fps however playing in high pop servers in green areas is unplayable but that’s a rust issue really.. the trees causes serious issues even when harvesting it you lose fps
i'm on a laptop atm cause my main pc is broken but it boosted my fps on rustoria eu main from 120fps to 195fps ( CPU-Intel I5 11400h GPU-RTX 3050 4GB )
whasup;; i did the whole thing and i must say didnt double the fps BUT gained like 50% (from 50/60 ish to 80/90) a lot smoother and fast responsive. thank you for the tuto.
Idk if it’s because I’m on a 100 pop atm but my fps just went from 80-90fps to 170-180 fps, also enabled xmp on my memory tho 2133 - 3600 so maybe that’s also something that effected it
what is ur setup
@@dareplejer6063 got a 2070 super, 32g of 3600 speed ram and just got a ryzen 7 5800X. Before watching this video and changing my ram speeds I was sitting around 60-90fps on max pop servers now it’s an average of 120-140 on max pop servers, barely falls below 100fps!
Before I got the new cpu (ryzen 5 3600XT) I was averaging about 60-70fps(while recording and using 2 monitors) just goes to show how cpu bound rust is
That’s because RUST is mainly CPU based not GPU.
.... you have RTX 3070 and we have crappy pcs
@@SmidzOg Can you explain what this xmp setting is? I have a 2070 super, Ryzen 9 3900x, 64gb DDR4 ram which I think is 3400 or 3600. Yet I barely get over 100-110 only in some areas.
The restore point just saved me from nuking my main drive.
So basically, I was following your guide. And at the Nvidia GeForce Experience software, I tried installing the newest drivers. But little did I know that it would softlock my pc, and then when I restarted it, I would be unable to even reach the sign in screen, even when I booted in safe mode. But I found how to access the restore point and now everything is back to normal lmao.
Thank you random rust youtuber.
Great vid and great explanation, love the clean and soft talking no bs just straight to the point. keep it up =)
You are a life saver bro, that’s a phat sub
Yo, this is a great guide and all. But like we not gon talk about that homework folder on his desktop!?!?!?!?!
What? Bro has homework 😆
Bro 35 still going school
@@CoolockIRA nah bro it’s the other homework folder😉
@@CoolockIRA who cares?
@@xaviermesmeric5345 who cares?
Very nice! I'm glad I had to reinstall the game because it made me come and search for settings and found this!
Thank you so much I went from 30-60 fps on like 0.3 and 0.6 render revolution to 1.0 and 70-100 fps
I genuinely
Can’t thank you enough 2k hours later I thought about quitting and this gave me over 100 more fps
Hey Bacca! I just tried to follow this guide step by step from a Rust that I haven't tweaked on my new machine. I gained around 10-20 steady FPS on a highend computer, and not only that, it feels smoother. No screen-tearing is what makes it feel so smooth. Thanks alot for putting this guide out here! Hugs all the way from Sweden
vart från sverige är du? kanske jag kan hjälpa dig
a guide that actually works, goddamn, just went from 50-60 in high pop to 90-120 fps. thanks a lot.
just a heads up, setting max gibs to 0 still gives you gibs sometimes, so just do effects.maxgibs -1 in console for no gibs ever
I saw a very noticeable increase in my fps and also following these settings helped me to stop extreme lag fps drops when looking at certain objects such as TC's and looking the general direction of object heavy monuments such as launch site and large oil rig. Thank you very much very helpful guide.
if you have fps problems when looking in a certain direction try turning on/off occlusion culling. I think it's in the experimental tab in the options.
Thanks a lot for this guide!
The FPS gain was sadly insignificant, however overall the experience did become a bit smoother and a bit more responsive with less freezes/fps lag spikes and random delays.
What cpu you got? Only makes a diffrence if you have extra cpu usage to spare I guess, I saw at the start when he had lower fps he also had like 20 % less cpu usage
Rust is cpu intensive and mai ly uses single core performance so high clock speed or good single core performance is best
@@KaiMagee19 You are right, I do need to upgrade my CPU as it's not just old but also designed for multitasking instead of single core performance (AMD Ryzen 7 1700).
I am thinking of replacing it with Ryzen 5 3600X or Ryzen 5 5600X or Ryzen 7 3800X, once I manage to save up some money.
@@UnicornrU that would be good
@@UnicornrU i have the amd ryzen 7 1800x and ive got the same issue i gotta switch too iguess
yoo i actually appreciate you alot, you raised my fps from avg 40-50 to avg 80. King.
Dude after this vid i got a noticeable increase of fps TY and keep the content up
thank you man, you just increased my fps by 20-30, ur a king
this jawn really worked i went from 130+ to 170+
Amazing video! Got my fps all the from 80 to all the way to 130. Definitely going to subscribe!
Hey I just wanna say this is amazing I got rust on my laptop and I’ve been wanting to play this game for so long and I can actually run it now
Man, I think those launch options did the trick for me... thanks!
This made a big difference - thanks!
Full screen isn't just about more FPS, which is negible 1-5fps most times if that. What it truly does is removes latency to the game, because your PC is focused on the game. In borderless, the game wont take priority always over other programs. So introduces possible input lag or screen delay(which is alot harder to notice), depending on your setup.
I went from 80-100 in game to 300+ consistently omg thank you so much
Cap
Even for 2020 vid this actually helped me go from a average 80 fps to 140 fps
THank you so much i got my pc and in rust i was getting 15 - 30 fps now i am getting steady 80-90 and i can actually play
Gyatt damn I just went from 15 fps to 20 thanks to your guide cheers mate
Thank you it's best setting I've got
So all these people in the comments saying, “ I can’t get anything above 170fps” but they only have a 144hz monitor, it doesn’t matter how good you optimise your game you still need a monitor to go with it, just a heads up. 😁
You can notice a difference with 60FPS 60Hz and 200FPS and 60Hz. I'm pretty sure it's more of a responsivnes thing tho. But it still makes huge difference Linus did nice video about it testing various Hz monitors/FPS with different people and found that pretty much everyone performed better and felt increase in FPS above monitor refresh rate and biggest jump was between 60 to 144hz after that not many people could recognize which is which (144hzvs240hz).
Jokes on you I have a 165 hz monitor
Its basically true, but of course the pros play cs with like 400 fps with 240hz monitors. Responsiveness and lag improve with fps.
thanks ! made my game smoother
Worked like charm! Thanks a lot
Nice. got around a 10-20+ fps increase.
You solved my coil whine problem, thank you so much bro !!!!!!!
Thanks man it helped a ton!
THX man, i need that FPS boost so much like 20-30 more FPS. Still working 2023 :)
Ty man. Went from 85-90fps to 110-120fps
thanks man i had about 25-30 fps now i get 55-60 a tip is to turn off model view in user interfence settings in rust it will boost fps
Good shit Thanks Broski
outstanding guide! thank you.
Thanks man that helped alot
thank you for this it really worked
wow good vid dude helped me a lot :]
Solid, Thanks!
If you have an issue with other games just showing a black screen after using these settings, just go back into NVIDIA Control Panel and change your Vertical Sync. I'm not sure which settings is best to put it on, I just put it as ''On'' when playing other games.
Vsync removes screen tearing, but increases latency and caps your frame rate to your monitor refresh rate. I recommend it off, but it’s your own preference.
great video man
awesome guid dude
increased my fps by 5 But made my game feel 2x smoother then beffore thanks bro
Super helpful, thank you.
Good work bro!
went from 50 to 300 cheers bro
Such cap 😂
Didn't really gain any fps at all but this got rid of all of my lag spikes which is pretty nice. I'm guessing the people saying that they got double the fps were on really high settings before and have good pcs
Really high settings can give you more fps than low settings on a high end pc because low settings will use less of your cpu which is pretty bad
if you are g-sync compatible while using a nvidia card using your native resolution aka the max res for your monitor; it will give you more frames and quality
Gonna try this later to see if I can get some more fps :)
did it help?😄
@@SJ-ki1eq Not really just less fps drops
holy shit hes back
from 80 to 100 in empty outpost, thx
bro you are having bottleneck
@Brendan Redmond yeah whit that 3600, he got like 50% bottleneck, its insane 😅
@Brendan Redmond @Zak I’ve got a 3070 with Ryzen 5 3600 too 🫣 what CPU would you guys recommend?
@@JarPapa I also interesting what processor is now preferred for 3060
@@JarPapa its fine there shouldnt be a bottleneck
Thanks, much more stability in the game after the settings. Also upgrade your ram, rust needs up to 15 gigs of ram and if you are running windows, it takes about 5 gigs as well, so you are short. Good luck mate.
my fps went from 60 to 120 fps really good tut
i’m actually getting less frames from this but it runs smoother and consistently. but i had my game on max everything and i was reaching 140. now i’m reaching 120
Maybe bottleneck
What a good student, he has a folder dedicated for storing his homework. It looks like theres an anime girl on it he must be an artist!
bro thank you so much.
Idk what that last command is but it literally make my game 2x smoother
Really good video! but for some advanced shit you can overclock gpu or cpu for better fps
@@BaccaRust I completely agree but recently incrrased the ghz of my cpu and the fan speeds and made my game playable again
but it definetly depends cuz i used to overclock alot and nothing really changed only fucked my pc up, its worth a try but it depends on your pc and some other shit
Definitely didn’t double my fps but made me improve it by like 10-20 fps however playing in high pop servers in green areas is unplayable but that’s a rust issue really.. the trees causes serious issues even when harvesting it you lose fps
yes rust is still runs on a old engine which sucks so it will always be shit no matter what
Thank you!
thanks so much :)
Bro thank you soo much
got like 10-15 fps extra or so, tysm!
home work folder go crazy
@@BaccaRust 😂😂😂it was just right there
i'm on a laptop atm cause my main pc is broken but it boosted my fps on rustoria eu main from 120fps to 195fps
( CPU-Intel I5 11400h GPU-RTX 3050 4GB )
how man, i have the same specs and i cant even hit 80 fps
@@lutkoplayz2870 Same, I get around that fps, I think it is cause of the RAM, how much RAM do you have
@@redditstoriesforyou0 trust me, he doesnt have 190 fps not even 120 xD
hes back
legend! long?
Carefull, one setting (no idea which one, will cause screens flickering)
Something in this video made me start stuttering like crazy ingame, and my game closes when I join a server. I'm done blindly following these guides
goated guide went from 90/100 to 120/140
what a legend
Bro thank you I was getting 60 fps now I’m getting 120 big difference
whasup;; i did the whole thing and i must say didnt double the fps BUT gained like 50% (from 50/60 ish to 80/90) a lot smoother and fast responsive. thank you for the tuto.
I am confused on 4:30 you say to copy and paste some writing in launch options. But what writing?
Yeah I am confused on that part as well. Not sure what he copied to paste in there.
Just found it. It's in the description for the video. FYI
Works great, instantly gained 20-30 fps, not much but at least I can run 100 fps on my mid tier rig
Thank you Good sir
went from 40 fps to 75-90 , appreciate u man
swear?
@@massimessa1663 yeah but i spike a lil , i dont drop to under 60 and my pc is ASS
@@uivah what graphics card??
what does "-force-feature-level-11-0" do?
Awesome video almost doubled my fps😂😂
thank you you da best
Felep OG
from 70-80 to 90-105 with my rtx 3080. also quality become better with ur settings. thanks a lot
bro i got 120 before this with a rtx 3060 you should be getting more
“Quit grass” works just as well saves you like 100 fps
i went from 60 fps to 140 fps thanks bro
thankyou for these settings. what motherboard do you have for your i5 13600?
Do you a tutorial for amd aswell?
No way you made your channel march 29 because my birthday is March 31!
thank you, I gained around 30 fps and is more stable and I was using higher resolution. sub and like
It works great for me, only that I updated the video card and now the textures are blurred at a distance
That's DLSS turn it off
@@fettuccine723 no its just low shadow distance iirc
thanks man
so if you have 8gb ram how much i need to put in -maxMem=14000? or to change this 14000
I'd recommend 6000. That way you still save 2GB for your other apps and OS.
How did you get that thing to copy into the properties section at 4:19 ?
в описании
I came here to ask this. Hope we get an answer..
whats your opinion on nvidia dlss should i just keep it off or put it on max performance?
@@BaccaRust thanks I'll experiment
good video, also what song is in the background at 5:35 ?
My RAM is 8GB, but I also have 4GB VRAM, so should I set my memory to about 7GB RAM or would I add them?
I run 16
I have 32gb of ram and noticed that my max memory was set to 32700, hopefully after switching to max memory to 28,000 it should work better
Ur game is never gonna use anywhere near that much energy so it’s not gonna make a difference
@@paulirina1800 it actually made a huge difference, I dont drop frames that much anymore
@@paulirina1800 L
How did you bring up that menu to assigned the "o" key?
wheres the description
I have a 1660 super and i5 I only get like 60 frames with everything on max performance