A simple and straight forward tutorial that covers all the mechanical aspects. Two things that would improver the value. A parts list and links to parts. Show the bays active in a raid setup.
I'd like to thank you as well. I just did this exact job, but only had instructions for the cage, not the expansion card. I assumed the card was just a plugin, but via your video I learned you need to move the existing drives to the card and cable the card to the controller. Thanks!
Hey I know this is a while past the last comment, but its good to know your video completely helped me to understand how i'm going to add drives and expander card, thank you very much....
Next video from you I hope has better audio and also shows a successful boot-up and perhaps also how the disks are configured (There are lots of options, JBOD, RAIDxx, Windows Storage, StableBit Drivepool and probably a bunch more other options). People who spend their time watching from start to finish sort of expect seeing the stuff actually working.
Yes! Thank you SO much! I was totally stuck, and you helped me get past a fundamental misunderstanding. I assumed the expander card communicated through the PCI slot.. and I should leave existing cabling in place, and just add a cable connecting the new (second) cage to the expander card. I didn't realize the expander needed to get connected to the existing CONTROLLER. Also my drive cage and expander came with eight different sets of cables... and I was having trouble figuring out which one to use. As soon as you got to the part about "UNPLUG your existing cables from original cage to the controller" my mental light bulb turned on. Ah Ha!! Glory be. Thanks so much!
Thanks for this. I've been given a HP Proliant DL380 G7 with a single CPU, 48 Gb RAM and eight 2.5" drive bays. I have an extra controller and cable so I might try to put four x 3.5 drive bays (2.5" SAS drives are too expensive).
خیلی ممنون برادر عزیز خیلی عالی بود من میخوام یک RAID CONTROLLER CARD داخلی بخرم اما نمی دانم دقیق چه مدل است و از کدام سایت بخرم ایا SATA روهم support میکنه ممنون میشم اگر جواب دهید
Thanks for the info, question, any risk to the original (cage 1) raid array when you add the second drive cage and new drives? We don't want to loose the data/config on the original drives. Thanks
Hey guys, i found this video and had the same Problem. We have a Server with onboard RAID Card and now we have the need to expand the Server with another Disk Cage. We buyd the HPE 12G SAS Expander Card and installed them. After a bit of try and error it works now without a RAID loose or any kind of error. I used the same Cable as shown in the video but we used a P440ar expander card. so the was no two seperate short cables from the onboard card to the expander card. but the was a other cable with straight connectors. they are labled with port 3 and 4 on the PCI side and Port 1 and 2 on the onboard card. And now its working.
Hi, Could you please let me know what is the Part no of the Mini SAS Cable which is used to connect in between P440ar/2G FIO Controller & 12Gb SAS Expander Card?
Asaduzzaman Asad Not sure if you found the info you required but apparently the SAS expander isn't compatible with the P440ar but only the P440. Unless you can tell me otherwise?? Just had to backtrack my install as the server wouldn't boot with the ar and expander
⭐⭐⭐ Note Order list for DL380 G10 with in the comment ⭐⭐⭐ EN: The RAID information is retained. I still see my RAID 1 and RAID 5 from Bay 3, as well as my new 8 SSD in Bay 2. Thanks for the video, the whole thing also works with a DL380 G10. - HPE Smart Array P408i-a SR Gen10 (804334-001) - HP 12G SAS Expander Card (P/N: 761879-001), currently from the G9. The one ordered for G10 (P/N: 870549-B21B) is apparently defective. When the replacement arrives, I'll write again to see if it works with this G10 version. - Box for Bay 1 or Bay 2 (P/N: 826691-B21B) - Cable Bay1 Bay2 (P/N: 781579-001) - Cable Port 1 to Port 1 (P/N: 869803-001) - Cable Port 2 to Port 2 (P/N: 869802-001) - Important, the fans must be exchanged for Performance FAN! HP DL380 / DL560 G10 HIGH PERFORMANCE FAN MODULE KIT (P/N: 867810-B21) approx. 125€ for 6x refurbished DE: Danke für das Video, das ganze funktioniert auch mit einem DL380 G10. Die RAID Informationen bleiben erhalten. Ich sehe weiterhin mein RAID 1 und RAID 5 von Bay 3, sowie meine neuen 8 SSD in Bay 2 - HPE Smart Array P408i-a SR Gen10 (804334-001) - HP 12G SAS Expander Card (P/N: 761879-001), aktuell vom G9. Die bestellte für G10 (P/N: 870549-B21B) ist scheinbar defekt. Wenn der Ersatz da ist, schreibe ich noch mal, ob es mit dieser G10 Version auch geht. - Box for Bay 1 oder Bay 2 (P/N: 826691-B21B) - Kabel Bay1 Bay2 (P/N: 781579-001) - Kabel Port 1 to Port 1 (P/N: 869803-001) - Kabel Port 2 to Port 2 (P/N: 869802-001) - Wichtig, die Lüfter müssen gegen Performance FAN getauscht werden! HP DL380 / DL560 G10 HIGH PERFORMANCE FAN MODULE KIT (P/N: 867810-B21) ca. 125€ für 6x Refurbished
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
6 years later, still a useful video, thanks for this!
A simple and straight forward tutorial that covers all the mechanical aspects. Two things that would improver the value. A parts list and links to parts. Show the bays active in a raid setup.
My thoughts exactly.
I'd like to thank you as well. I just did this exact job, but only had instructions for the cage, not the expansion card. I assumed the card was just a plugin, but via your video I learned you need to move the existing drives to the card and cable the card to the controller. Thanks!
عالی بود مهندس استفاده کردیم
بسیار عالی و ممنون از آموزشتون
کاشکی پارت نامبر هایی که استفاده کردید رو میزدید توی توضیحات که برای این کار بدونیم چی باید بخریم
MashAllah very good video and clear explanation.
Hey I know this is a while past the last comment, but its good to know your video completely helped me to understand how i'm going to add drives and expander card, thank you very much....
do you have a video also adding expander card on gen10 servers for DL380
Next video from you I hope has better audio and also shows a successful boot-up and perhaps also how the disks are configured (There are lots of options, JBOD, RAIDxx, Windows Storage, StableBit Drivepool and probably a bunch more other options).
People who spend their time watching from start to finish sort of expect seeing the stuff actually working.
Yes! Thank you SO much! I was totally stuck, and you helped me get past a fundamental misunderstanding. I assumed the expander card communicated through the PCI slot.. and I should leave existing cabling in place, and just add a cable connecting the new (second) cage to the expander card. I didn't realize the expander needed to get connected to the existing CONTROLLER. Also my drive cage and expander came with eight different sets of cables... and I was having trouble figuring out which one to use. As soon as you got to the part about "UNPLUG your existing cables from original cage to the controller" my mental light bulb turned on. Ah Ha!! Glory be. Thanks so much!
Yes this was a nice explanation. I have to do the same and was not sure that the expander Card has no Controller !! Thanks alot.
great video guys! i wanted to see backplane ports and i see them very clear
than u my friend thais is awsome for our commiunity
It was awesome, Persian Geek are everywhere :) Proud of watching
Thanks for making this type of video it is very useful for learners.
Excellent video. This is exactly what I am doing soon at work.
سلام - ممنون خوب بود.
Thanks, nice and clear explaination :)
Nicely done, great information, the flow on the tutorial was great. Very helpful as I am getting ready to perform the same operation.
Good guide. Thanks
By far the best video on this subject on RUclips. Thanks! gave ya a like and subscription.
Одобрительный комментарий в поддержку канала
Thanks !!! Very good video.
Can you please tell RAid 5 will extend after adding hard drives through backplane cage and extender
Thanks for this video guys!
Thanks for this. I've been given a HP Proliant DL380 G7 with a single CPU, 48 Gb RAM and eight 2.5" drive bays. I have an extra controller and cable so I might try to put four x 3.5 drive bays (2.5" SAS drives are too expensive).
Thank you so much for your video. It helped me a lot.
Good. Thanks
very nice...Thanks
What is that expand card product # and will it work with dl380p gen8?
spoof i think same set up with adding dl380 sas expander card in gen10 right?
Great stuff
Is this a SSD NVMe Discs upgrade?
Thanks, I have expanded to 24 disks by flowing you video.
When we add disk does it affect the existing data
@@ramilsathyan1493no
خیلی ممنون برادر عزیز خیلی عالی بود
من میخوام یک RAID CONTROLLER CARD داخلی بخرم اما نمی دانم دقیق چه مدل است و از کدام سایت بخرم
ایا SATA روهم support میکنه
ممنون میشم اگر جواب دهید
Hello, please, what PN has the expander card?
Nice info
Thanks for the info, question, any risk to the original (cage 1) raid array when you add the second drive cage and new drives? We don't want to loose the data/config on the original drives. Thanks
Hi spoof ir, I have the same question too. Thanks
Hey guys, i found this video and had the same Problem. We have a Server with onboard RAID Card and now we have the need to expand the Server with another Disk Cage. We buyd the HPE 12G SAS Expander Card and installed them. After a bit of try and error it works now without a RAID loose or any kind of error. I used the same Cable as shown in the video but we used a P440ar expander card. so the was no two seperate short cables from the onboard card to the expander card. but the was a other cable with straight connectors. they are labled with port 3 and 4 on the PCI side and Port 1 and 2 on the onboard card. And now its working.
Hi,
Could you please let me know what is the Part no of the Mini SAS Cable which is used to connect in between P440ar/2G FIO Controller & 12Gb SAS Expander Card?
Asaduzzaman Asad Not sure if you found the info you required but apparently the SAS expander isn't compatible with the P440ar but only the P440. Unless you can tell me otherwise?? Just had to backtrack my install as the server wouldn't boot with the ar and expander
Thank you my friend! This was very helpful. 👌
Thank you so much for video ❤
Great video!
Hey, do you have part numbers?
Thank you very mutch for this video. Only one question: Can I upgrade the raid card with an existing raid configuration? Thanks for any replay.
I read that Gen 8 and later doesn't support SAS expanders???
I love my Persian speaking ppl!
Excellent thanks.
good job
⭐⭐⭐ Note Order list for DL380 G10 with in the comment ⭐⭐⭐
EN:
The RAID information is retained. I still see my RAID 1 and RAID 5 from Bay 3, as well as my new 8 SSD in Bay 2.
Thanks for the video, the whole thing also works with a DL380 G10.
- HPE Smart Array P408i-a SR Gen10 (804334-001)
- HP 12G SAS Expander Card (P/N: 761879-001), currently from the G9. The one ordered for G10 (P/N: 870549-B21B) is apparently defective. When the replacement arrives, I'll write again to see if it works with this G10 version.
- Box for Bay 1 or Bay 2 (P/N: 826691-B21B)
- Cable Bay1 Bay2 (P/N: 781579-001)
- Cable Port 1 to Port 1 (P/N: 869803-001)
- Cable Port 2 to Port 2 (P/N: 869802-001)
- Important, the fans must be exchanged for Performance FAN!
HP DL380 / DL560 G10 HIGH PERFORMANCE FAN MODULE KIT (P/N: 867810-B21) approx. 125€ for 6x refurbished
DE:
Danke für das Video, das ganze funktioniert auch mit einem DL380 G10.
Die RAID Informationen bleiben erhalten. Ich sehe weiterhin mein RAID 1 und RAID 5 von Bay 3, sowie meine neuen 8 SSD in Bay 2
- HPE Smart Array P408i-a SR Gen10 (804334-001)
- HP 12G SAS Expander Card (P/N: 761879-001), aktuell vom G9. Die bestellte für G10 (P/N: 870549-B21B) ist scheinbar defekt. Wenn der Ersatz da ist, schreibe ich noch mal, ob es mit dieser G10 Version auch geht.
- Box for Bay 1 oder Bay 2 (P/N: 826691-B21B)
- Kabel Bay1 Bay2 (P/N: 781579-001)
- Kabel Port 1 to Port 1 (P/N: 869803-001)
- Kabel Port 2 to Port 2 (P/N: 869802-001)
- Wichtig, die Lüfter müssen gegen Performance FAN getauscht werden!
HP DL380 / DL560 G10 HIGH PERFORMANCE FAN MODULE KIT (P/N: 867810-B21) ca. 125€ für 6x Refurbished
👍
Great Video
Hola From Mexico, How can I get this the cables, 5,6,7,8 ports sas I have tried to search the internet but I cannot find them, to buy them
Thanks...
خیلی آقایی
اگر اکپنشن 1 زیر بار باشه با اضافه کردن دومی مشکلی برای اولی پیش نمیاد
Thank you very much,
can you provide the HP part #s for the drive bay and cables?
YOU HAVE 2 PAIR CABLE IN 1,WHY I DONT HAVE THE SAME CABLE FOR EXPANDER TO DL380 GEN10
what about ports 3 and 4?
1 and 2 connect raid card to sas expander
3 and 4 is box 1
4 and 5 is box 2
6 and 7 is box 3
He was using box one for Dvd drive so didnt need it.
Routing the SAS cables in a gen 8 is an absolute nightmare. There's almost no room to do it.
Part Numbers please?
768857-B21 768857-011- HPE DL380 Gen9 Additional 8SFF Bay2 Cage/Backplane Kit
Hpe 12g Sas Expander Card For Dl380 Gen9 761879-001, 727250-b21
داداش خب فارسی کار کن دیگه از این کانتنت ها انگلیسیش کم نیست لطفاً فارسی کار کن❤️❤️❤️❤️❤️❤️❤️
حاجی خو فارسی هم میگفتی