JEEP ZJ CATALYTIC CONVERTER REPLACEMENT
HTML-код
- Опубликовано: 20 окт 2024
- "Piper" the 97 Jeep Grand Cherokee gets a new Catalytic converter...
1993-1998 Jeep Grand Cherokee Catalytic converter replacement reference video.
DISCONNECT THE NEGATIVE BATTERY CABLE BEFORE MESSING WITH o2 SENSOR!!!!
DISCLAIMER
DUE TO FACTORS BEYOND THE CONTROL OF BARRICADE GARAGE, I CAN NOT GUARANTEE AGAINST IMPROPER USE OR UNAUTHORIZED MODIFICATIONS OF THIS INFORMATION. BARRICADE GARAGE ASSUMES NO LIABILITY FOR PROPERTY DAMAGE OR INJURY INCURRED AS A RESULT OF ANY OF THE INFORMATION CONTAINED IN THIS VIDEO.
USE THIS INFORMATION AT YOUR OWN RISK. BARRICADE GARAGE RECOMMENDS SAFE PRACTICES WHEN WORKING ON VEHICHLES AND OR WITH TOOLS SEEN OR IMPLIED IN THIS VIDEO. DUE TO FACTORS BEYOND THE CONTROL OF BARRICADE GARAGE, NO INFORMATION CONTAINED IN THIS VIDEO SHALL CREATE ANY EXPRESSED OR IMPLIED WARRANTY OR GUARANTEE OF ANY PARTICULAR RESULT. ANY INJURY, DAMAGE, OR LOSS THAT MAY RESULT FROM IMPROPER USE OF THESE TOOLS, EQUIPMENT, OR FROM THE INFORMATION CONTAINED IN THIS VIDEO IS THE SOLE RESPONSIBILITY OF THE USER AND NOT BARRICADE GARAGE.
Any doubts I may have had about you as a mechanic disappeared when you broke out the sawzall! Oh yeah, the cat explanation was good too.👍
I'm not sure I've seen a repair video go so in depth into the explanation of parts and what their functions are. Keep it up!
I have seen some rubbish videos on how to repair ZJ Jeeps but that God I have found this one a Great tutorial, easy to follow and best of all the guy knows his Jeeps.
When he said this is going to be my weapon of choice I knew he knew what he was doing. Respect 🙏
Your a HELL OF A MAN TO DO THAT FOR YOUR WOMAN, YOU KEEP HER HAPPY EVERYBODIES HAPPY BROTHER. YOU LEARNED THAT EARLY, GREAT VID.
nowr2run lol. you should check out the fuel pump video i did on her Jeep
ruclips.net/video/-qXWKn0lyUw/видео.html
What brand Cadillac converter you use
Great DIY video on CAT replacement plus a bit on why the CAT is part of the exhaust system.
dude, this is probably the first video ive seen in a while with good cinematography and clear instructions, hell yeah dude.
Thank you for this brother. Exactly what I needed to see. Subscribed.
Great job thanks for all the technical info . I am now looking forward to installing my new catalytic converter since mine was stolen and recklessly cut off my car. looking forward to more videos.
GREAT WORK CLEAN N STRAIGHT TO THE POINT KEEP IT UP MY BROTHER PEACE N BLESSING AMEN 👌🤟🤲😭🤡
I like the editting and filming on this video. That jeep sounds good too.
thanks for watching and taking the time to leave a comment,
What inspired me more was how you explained the function of the very part you installed! Yous a beast!
Very helpful, great editing too. Been hunting for a cat replacement video and this was what I was looking for.
Thank you for the video. Great job on putting it together too! Concise, good lighting and very informative.
Struggle is real 😅...
great job!
I just subscribed cause you videos & work are awesome
Thats a new thing for me...the melting exhaust leaker thing. I still like watching the old vids...back breaking labor with the recording and all...
Awesome this helped. Now I can do it myself. ✊🏼
Feel free to make more of these, we will watch em !
Right to the point, good stuff
+Andrew 1059 thanks
That sounds nice. I need to do this or at least the o2 sensor before the valve cover gaskets...emission test this month. Thanks again!
RUclips brought me here and I subscribed for the funny political skits, but I stayed for the maintenance videos. You rock, man!
Great Video Bro loved all of it your editing was enjoying it also,Stay safe God Bless 👍👍🙏
Nice job! Thank you! I just don't have over 1K to pay for this. I have 2 CCs and think I can do both for about 3 Hundred. Thanks again!
Excellent job!!! You did yo damn thang!!!
Thanks for this vid. It was about the best I've seen yet on this subject.
You made it look easy I hope when I do mine since I live in Illinois and they use salt I will be able to remove mine as easy as you make it look thanks again
Live in New Hampshire and I can tell you, you won't.
Bro great stuff man iv never worked on a jeep till I got my a couple of months ago and so far you vids are great help man
these bolts are tuff even a little bit of pressure can make em snap when they rusty busty
Damn, it's cool seeing you just being you.
Is it advisable to use aftermarket catalytic converter instead?
You didn't trigger my ADD with the sawzall so I'd say that worked perfectly.
Loved the information. Gave me insight on a V8 commander
Nice job, Bruh..... Thanx I gotta 95 park ave that needs this..peace..
Heck Yeah brotha God Bless you for this video!!
Thank you for this video. I didn't know that a cat. could be done without welding.
Straightforward. Thanks
I love your demonstrations for signs you should look for 😂
What leak proof sealer did you use? And how many degrees can it withhold? Also did you use the tape in replacement of welding the parts?
came for the comedy, stayed for the practical advice on cars
Great work & nice video
🙏 Thanks for all your videos Brother
I like your style, you gave me some good ideals on dat cat !👍
Good video, thanks i appreciate it
There are two O2 sensors that one might consider replacing (which I did.), as they could effect the longevity of the new cat. Run without a cat and it's O2 sensor's the engine will drop to a fall back mode. Those O2 sensors are a part of the engine management system that controls the air/fuel mixture. Just as anyone who wishes to do a engine build to get better HP|torque will wait until they have all the required parts to do it properly as the engine management system needs to be changed mechanically or electronically. Feel free to read about how the weights in an old style distributor works, while some vehicles lack a distributor. Yes, a person can change the injectors to get a better spray pattern, but the computer will still provide so much fuel to air as programmed for our ZJ's. Yes, the deer and elk can hear me coming a bit farther down the road due to the fact I have a Magnaflow cat and 50 series Flowmaster muffler. But I still have the same horsepower and torque prior to installing them.
Thanks for dropping knowledge. I have a long way to go and appreciate the insight
@@barricadegarage5361 When I get a chance I'll be doing a link to your ZJ series in one of my posts in a forum that I'm a part of. As you can see all of us ZJ owners worldwide fully appreciate the work you have done and hope you continue. Jeep Forum dot Com ;) lol
@@Mauser1965 oh yeah please feel free to share any video you want
You are partially correct. The upstream sensor does indeed control fuel trims, the downstream is simply telling the pcm if the cat is working or not. When the downstream o2 sensor is failing, it simply thinks the catalytic converter isn't operating properly. The cat burns off pollutants in the exhaust, which causes a reduction in oxygen after the cat. The downstream o2 sensor reads this as a lower oxygen reading and often is comparing what it reads against the upstream sensor. If it reads similarly, then the cat is not operating, which is bad solely from an emissions standpoint and won't impact drivability or fuel economy.
I live in GA and my truck is 37 years old! No emissions for me! haha.
Outstanding job
Looks like something that I need to do as well. I'm throwing a P0420 code (less than 95% catalytic converter efficiency). That's not how I like the number 420! ;-)
OldsVistaCruiser
go for it!. its an easy fix on these vehichles because they only have one Cat.
when you do replace it I recommend going with the direct fit Magnaflow Cat part#23226. heres a sound clip...
ruclips.net/video/Ts3igqwF8Js/видео.html
BARRICADE GARAGE - I do like the stock sound, though. Remember, I have a 4.0 six. By the way, it even has a factory engine block heater!
Thanks for the video!! What side Is the converter located in a 2006 Jeep commander, left or right??
What was the brand of tape you used?
What is that sealer you used? Also thank you for making your videos clear.
That was an exhaust wrap that stops leaks from advanced auto parts
@@barricadegarage5361 can't find it at advanced auto part could you give the part number ?
Solid vid and great explanations.
A Lot a good info... thanks👍🏿👍🏿👍🏿👍🏿👍🏿
Found your channel recently. Great mix of solid how to vids and satire/comedy. Also, what is the name of the song near the end here?
I like it.
Damn. That was recall work on my zj
Hey bro, what was the exact dimensions of that adapter you used to install the new cat converter ? I know one end was 2 1/4 but what was the other end?
2 1/2 I think
I have a 93 ZJ with the 5.2 so your videos are very helpful to me bro 🗣️💯
Exelent video keep them coming
I got a mechanic to punch the insides out and put the hollowed out Cat back in to pass inspections 😂 sounds amazing as well
Good stuff ..right to the poibt as it should be. I subscribed
Finally a good tutorial
Yeah. If your front already has aftermarket clamps.
He really made it seem like them sensors just come off just like that 😂😂😂😂😂
Are you playing bass at end of video👍🤟
Did you put the leak sealer on the front side of the CAT as well or just on the rear. Can you please provide a link for the sealer, so I can buy it? Are the two clamps you used on the rear side of the CAT the same or different kind of clamps? It would be greatly appreciated if you could provide a link for the clamps you used as well. Thank you!
So will this same scenario work on my 1999 Jeep Grand Cherokee, 4.0 motor? Your video was great.
Good editing and presentation.
Great, informative video
Nice work! Really appreciate it bro!
What about vehicles with 2 cats?. When the cat light comes on, is it the one underneath the vehicle? Or under the hood? I was told that my 2007 Jeep Grand Cherokee limited 4. Has one under the hood and one under the Jeep. Is that true? And how can you tell if the O2 sensor is good?
I cut those off too, those clamps suck if they've been on for a while
🤣🤣🤣 loved the acting on the video, helpful and entertaining👍👍
Saw the MD tags. Represent
Great video again! Curious as to if this a good time to change the 02 sensor?
Yes I would also change the o2 sensor
Hi Barricade, what brand/make is the catalytic converter? I'd like to mount it on my ZJ 5,9...
I have since upgraded to a magnaflow cat
ruclips.net/video/-YdJVR0JsNg/видео.html
Sounds good. What Muffler are you running? I am presently running a straight pipe, cut the bad catalytic converter off and weld it in a straight pipe, running a k&n muffler which is no longer made, along with the k&n FIPK
Ross Herrin flowmaster super 44 but I had to replace this cat again with a magnaflow unit..
ruclips.net/video/Ts3igqwF8Js/видео.html
@@barricadegarage5361 nice! the car sound magnaflow free flowing performance catalytic converters the best out there! Thanks for the quick reply I was thinking of going with the 44 also when my present muffler where's out
Ross Herrin you wont regret it... your neighbors might tho lol
@@barricadegarage5361 it's pretty loud now, no cat with a straight through muffler. I get comments all the time when floating through a parking lot, however, It has a high droning sound on the highway. The flowmaster 44 & 50 claim to tame the droning somewhat, thanks again!
NYCE JOB, MY DUDE! 👍🏻👍🏻😎😎
Can you provide a part number for the exhaust wrap used
That took you all day
Great vid. Thanks
Bro u do a great job
I cut my cat open and hollowed it out and welded it back up. Put two spark plug unfowlers on the empty cat and plugged the downstream O2 sensor into the top drilled it out unfowler that resides on top of the other undrilled unfowler. Reset the computer and was done with it.
Plate C
I would not brag about disabling emissions equipment.
@@fastinradfordable appreciate your comments. The CAT had already failed so I did not disable it. I did offer this as a map to solve the issue should it happen to someone else. If anything, I am still trying to be emissions compliant because I did keep the actual CAT on the exhaust.
Plate [C]
Wow what do you call that socket for the o2 sensor? Need one for myself!
have a good one, Bro
I have a 95 xj sport is it the same changing the cat
What shrink wrap/ heat seal did you use?
There's a recall on those Pittsburgh 3 ton jack stands you're using.
Ok
Nah that's only if you care about having legs.
what are your thoughts on flowmaster cat converters sold on ebay ?
Good gear, funny bloke!
nice work
Nice video 👌🏽
Great video man. Very very well done
Would this be the same for a WJ Grand Cherokee?
whats the catalytic converter have to do with the sound?
Hi nice vid , so it umproves performance accel And better mpg? How can i know if need yo reemplace they comverter tanks a Lot .
other than a broken honeycomb innard due to you hitting an object or going off road, Catalytic converters usually just don't go bad.
an engine that misfires will cause the Cat to overheat.
a blown head gasket will cause the Cat to come into contact with coolant and contaminate the honeycomb substrate.
using leaded fuel will also kill your Catalytic converter.
if you start your cat up and it sounds like pop rocks in your exhaust, then your Cat is Shot!
you can also use an OBD 2 scanner with live data to check .
@@barricadegarage5361 Great video, my jeep xj was misfireing because of a bad o2 sensor, was going to remove the sensor but riped the cat instead because of rust.. thx for showing! // from sweden
I have a question is the 2 1/4 ID or OD on the adapter with the blue label
Jay Smith its "ID"
@@barricadegarage5361 thanks man
Thanks for making this video, I have a check engine light indicating a cat problem. I'm gonna troubleshoot with the cat cleaner before I do this. What are the chances that the cleaner will actually work?
I dont know ive never used cat cleaner before
@@barricadegarage5361 not a good time to be under the hood in AZ right now.
There is a recall on those jack stands bro, Harbor freight will buy them back, they’re not safe .
I know you dont have a specific video, but do you know if a 94 grand cherokee has o2 senors? I dont see any. I cant find videos anywhere online. Thanks
It should unless the previous owner did something
BARRICADE GARAGE it has the 4.0 (that probably has nothing to do with it) but i dont see a sensor on or behind the cat. I havent checked too much infront of the cat tho. And nothing has been done to it, been in the family since brand new
@@airsoftmasterpistol1 Oh I cant help you out with that one
BARRICADE GARAGE found the sensor 4 hours later😂 thanks for replying to me you were right my man. Love your vids
Was was the cat brand name and cost?
does somebody know the brand for the leak-proof sealer?
Oh shit I used to use the diablo blade to cut PVC and copper, just about anything.