Here’s what we do in the old country,,,,,, We continue to let the crack go all the way around the tube. We cut about 1/16 of an inch where the crack was thus making a straight cut across the tube. We insert a piece of metal inside the tube were the crack was . Weld it in place to align the tubes. Once the tube is align , we just fill in the 1/16 of the space all the way around the tube, sand , paint.and whaaaaala……..Life short ,,,, enjoy the ride……
yeah, this seems like a good idea, or even an external plate to really reinforce the area. the trouble is it's close to the shifter braze on so a bit of a sensitive area. luckily this fix has held up 1000s of miles later.
yeah, i was hoping i could find a frame builder or someone who's done this kinda thing before but it's much easier said than done. either way, it's still going strong so he bailed me out of a situation where the frame was landfill-bound.
to all the people who keep screeching about the lack of eye protection, my dad was a farmer who fixed all his equipment by himself all he had was a shit welding mask that did not even allow him to see what he was doing, as a result he would often choose to not use it at all/use it partially now he's 52 and his sight is still going strong
he doesn't seem bothered, guessing he's done this before. the frame is doing great, i'll make a follow up video but you can see it on tour in my vids from mexico, albania and portugal.
Here it is Oct 14, 2021...bet Mike is in the hospital nearly blind if not completely, and the bike is broke again or about to. Mike isn't a pro much less an experienced hobby welder. I wish you well though, even a blind hog finds and acorn every once in a while.
It's June 2022. The bike is still going strong and has been to Mexico for a 2nd time. I'll be sure to update when it does break though. Mike, as it happens is doing really well. Last year he started his own bike repair shop and then he married JLo. Wishing him well.
Even without glasses you can't get A scan, metal in the eyes. Weld and then braze A 2piece sleeve be my less worry approach. Proof is in the pudding tho !
you're not wrong, that's why i was at a safe distance. i thought about the sleeve option too but for what it's worth this weld has held up very well 1000s of miles/km later.
I see you got the best and the stupidest welding guy in the world😁....and he will be the quickest welding guy in the world to go blind, doesn't even close his eyes as he welds😓
That is one ugly repair.. what a shame to take a nice frame and turn it into trash.. I am surprised that you could not find a competent frame builder that could undertake a real repair.. I have replaced head tubes, top tubes and lots of dropouts.. on lugged frames.. It's not easy but can be done..
i was really struggling to ride the broken frame but have put 1000s of miles on the "trash" version. i was surprised as well but that's the reality i was faced with and now i have a working bike.
Mike should use a welding helmet.....
Mike is blind maybe;)
prob...
My first MIG weld looked like that too, but at least I was learning on a folding chair.
that sounds dangerous, be careful
Always good to see someone going the extra mile to keep their bike.
the weld looked kinda bad at first but hey if it works it works :)
gigachad doesn't need a welding helmet
as a matter of fact he doesn't even blink, he just welds and gets shit done
Exactly, and the job getting done was all that mattered to me. Got that bike back on the road and have put a lot of miles on it since.
That bike 100% was in a collision. The huge ripple in the tube where the crack formed is a dead give away
I agree it looks that way. I was never in a collision though and the ripple wasn't there when I got it.
Holy crap! did he demand payment in Crack? No welding helmet?
all i'm willing to say is he was fairly compensated
Not even closing eyes! Holy Hell!!
Mike is an animal. I went blind for 5 minutes just watching the video.
you're right i should put a warning, too bad you'll never see it
I’ll bet he has the Midas touch. Everything he touches turns into a muffler.
it has been running a lot quieter now that you mentioned it
Here’s what we do in the old country,,,,,,
We continue to let the crack go all the way around the tube. We cut about 1/16 of an inch where the crack was thus making a straight cut across the tube. We insert a piece of metal inside the tube were the crack was . Weld it in place to align the tubes. Once the tube is align , we just fill in the 1/16 of the space all the way around the tube, sand , paint.and whaaaaala……..Life short ,,,, enjoy the ride……
Very nice and clever way thanks
yeah, this seems like a good idea, or even an external plate to really reinforce the area. the trouble is it's close to the shifter braze on so a bit of a sensitive area. luckily this fix has held up 1000s of miles later.
Nevermind the lack of welding helmet (at least arc-eye gets better), using a die grinder without eye protection is a 1000 IQ play.
be that as it may the job got done
Thank God for welders will to help out on difficult projects. I am looking for a welder like Mike in Washington state.
yeah, i was hoping i could find a frame builder or someone who's done this kinda thing before but it's much easier said than done. either way, it's still going strong so he bailed me out of a situation where the frame was landfill-bound.
Dude is not even wearing welding shield to protect his eyes
true
Surly makes very nice frames, expensive bit very nice. Worth saving.
yes, agreed. the weld wasn't the prettiest but i've put 1000s of miles on this bike since and it's still going strong.
That dude is such a G
Fuck what people say, the weld may look like shit but if it works, it works! Props to mike
ha, my sentiments exactly. i've put a lot of hard miles on this bike since the weld and it's still going strong.
wow that guy is not worried being blind
i am, hence watching from the phone
to all the people who keep screeching about the lack of eye protection, my dad was a farmer who fixed all his equipment by himself
all he had was a shit welding mask that did not even allow him to see what he was doing, as a result he would often choose to not use it at all/use it partially
now he's 52 and his sight is still going strong
Yeah, dunno where all the safety enthusiasts came from but I just let the man do his job how he seems fit.
"A grinder and paint make you the weldor you ain't"
Anonymous
agreed, i was much more satisfied with the welding part though
Steel is real but so is the welders eyes
yeah, good thing he's got 2 of them
I mean he was sort of using his safety squints. It will be fine. I bet it worked didn't it?
definitely worked and still going strong
Does he has callus on the eye balls?
Weld doesn't look too good. Frame still ok?
he doesn't seem bothered, guessing he's done this before. the frame is doing great, i'll make a follow up video but you can see it on tour in my vids from mexico, albania and portugal.
Do you guys still do this ? I have a bike that has a broken crack
this was done by a car garage in my area. you'll have to try some where you live and hopefully one of them will say yes.
theres friends like Mike and horses that just want to ride
amen, horse is still riding 1000s of miles later
Here it is Oct 14, 2021...bet Mike is in the hospital nearly blind if not completely, and the bike is broke again or about to. Mike isn't a pro much less an experienced hobby welder. I wish you well though, even a blind hog finds and acorn every once in a while.
It's June 2022. The bike is still going strong and has been to Mexico for a 2nd time. I'll be sure to update when it does break though. Mike, as it happens is doing really well. Last year he started his own bike repair shop and then he married JLo. Wishing him well.
@@biking-placeshaha 😂
Even without glasses you can't get A scan, metal in the eyes. Weld and then braze A 2piece sleeve be my less worry approach. Proof is in the pudding tho !
you're not wrong, that's why i was at a safe distance. i thought about the sleeve option too but for what it's worth this weld has held up very well 1000s of miles/km later.
No mask this is wild shit
i was not in the position to tell the man how to do his job
some generic comment about the welding helmet because im sure no one else wrote it
thanks, I hadn't noticed
How tf is this guy welding without a mask
life finds a way...
Shocking!
couldn't agree with you more/less
that weld looks like shit not gonna lie.
i'm more concerned about how it rides. even with a weld you wouldn't take to the prom, as in this case, steel is real.
a coupler an expensive frame goes with a cheap and crappy repair?
yep and it worked like a charm
Sorry but that was one ugly weld. But like and ugly women, some will keep you happy for years.lol
been happy a few years already
lol good one
That is not gonna last at all.
About 5000 miles later still going strong. Just spent 2 weeks on it in slovenia. Steel is real I've heard folks say.
So you don't need an helmet then. Just doing a few minutes of welding.
I wouldn't take this as a welding instructional video
How TF is he welding with no eye protection?
makes him feel alive
Hola saludos
hola
I see you got the best and the stupidest welding guy in the world😁....and he will be the quickest welding guy in the world to go blind, doesn't even close his eyes as he welds😓
maybe, i'm just glad the bike is back on the road though
Mike? No welding shield, no eye protection. His warranty is void
he will find a way to outlive all of us and with 20/20 vision
That is one ugly repair.. what a shame to take a nice frame and turn it into trash.. I am surprised that you could not find a competent frame builder that could undertake a real repair.. I have replaced head tubes, top tubes and lots of dropouts.. on lugged frames.. It's not easy but can be done..
i was really struggling to ride the broken frame but have put 1000s of miles on the "trash" version. i was surprised as well but that's the reality i was faced with and now i have a working bike.
Your poor eyes
my eyes were watching the phone, never been better