come on ppl lets bug foxwell so more on line Petition. www.change.org/p/support-foxwelluk-co-uk-foxwell-send-bodgit-and-leggit-garage-a-gt80-scanner-so-he-can-do-a-youtube-review-on-it?recruiter=731304761&
Signed the petition for the Foxwell scanner. ..Hope they send you one Leon good luck...I bought a Bluetooth OBD Dongle for £6:50 From Amazon can't believe how much info it shows using either Computer app on laptop or Android phone,i just leave it plugged in permanently and my Samsung Phone connects to it automatically when I start the Engine Now have Turbo boost,G force,Inlet temp,Water temp and oil pressure gauges It also does Graphs LOL Cheap as chips..
Totally. I got a 407 a few months ago and I bought the Lexia3 cable on Ebay for about €50-€60. So far its helped me track down a faulty fuel regulator, two separate ABS lights, ESP(egr) fault, update my ECU firmware, install a headphone jack into the radio, recalibrate steering, sync sync a new key when I changed the ignition and then add a spare key, find broken wire in the butterfly solenoid. Probably some more stuff too. Paying a dealer €70 a go for this kind of stuff would be madness. I did go to the dealer once about the ESP light (ended up being a stuck egr valve) they done a free scan, and told me I needed a new ABS block for €1200. lol
I bought an nt644 last week and I am really happy with it. I bought it as its able to register new batteries as needed in newer bmws etc and also the park brake reset as more and more cars have them
Shishu Ali hi mate I would get that checked out as when I contacted Foxwell they told me free updates also I am getting free updates on my Foxwell scan tools
How did we end up from this little nice and friendly scantools to TV-like scantools? It would be super nice to have bidirectional control and ecu coding and programing on the 680 pro. I honestly would prefer it over anything else. Quick and easy.
Does this perform stop start BMS resets on fitting of a new battery? I'm looking at a tool for roadside recovery diagnostics and if this has that function built in rather than buying the stand alone battery tool then that will be handy
Ok, that's it, just obtained one, absolute dogs yollocks, starting to narrow down me battery warning failure (This was on my old car, now sold :)), just need to find 2volts :), ok, traced to supply wiring fault to battery health box (BHB) attached to the battery. The BMS (Body Monitoring System) takes reference voltage direct from the battery and compares it to that sent by the BHB. If the BHB sends wrong or no voltage value BMS flags a failure. If you disconnect supply to BHB the BMS now takes is reference fom the ABS (and not the BHB) system and works fine (exempt yor battery wont be monitored to the same extent).
Hi Leon, I just bought a Foxwell NT644 pro from UK and I have some questions if you don't mind.... I connected the scanner to 2 cars, a BMW 5 Series E60 diesel from 2004 and a Land Rover Freelander 1 from 2002 also diesel .... the problem is that I don't find live data for oxigen sensors, fuel trims and a lot other data .... I found IAT, MAF, OBDSUP, MIL SIST,DTC CNT, ECT, MAP, RPM, VSS and also don't support special functions on either car... thanks, any advice is precious
Hi mate you need to go into OBD2 and not the manufacturer software you will find a lot more data pids there but you do need to use both of them to get all the data pids
I hope you get that big Foxwell tablet, that'd be nice to see! Live data in thoes smaller scan tools are great. Every bit of information are somtimes greatly useful. Usually the smaller scan tools doesn't have free updates so that is really good too.
manwiththestar hopefully I get it to mate send them an email with the link down below hopefully we will get it also someone has set up a petition which I think is really great lol I just love my subscribers they are the best thanks a lot for watching
Question, has anyone used the NT644Pro to bleed ABS module on a 2003-2007 Honda Accord? I've heard it works on the Bosch driver, but my module looks to be made by Nissin, at least that's all I could find on the housing. I can't seem to find anywhere on the net where the Nissin tells me what software driver it uses, as it very well could be using Bosch software. I want to make sure it is capable of that particular feature as it's one I really need, but I like all the other bi-directional tests that the 644 does compared to the NT630 Elite.
Well explained I have the 644 pro and it's excellent I've had it for a few yrs now and i scan all kind of cars I also own a launch as well but foxwell is my choice, very easy to update, great video, I want you review the gt80
Thanks a lot mate the GT90 is now out I would love to do with you on that but unfortunately I'm just not in the position right now to get one and foxwell will not send me one
I am going to purchase the gt90 for sure I had my nt 644 for 4 years now and it works excellent very easy to use so I expect a lot of improvement with the gt 90 i buy from foxwell factory direct, but keep the excellent videos coming
Hi mate unfortunately there is no scan tool out there even if you pay thousands upon thousands that will tell you exactly what's wrong they are all just code readers
Hi, I bought the Foxwell NT650 Elite, my car is Hyundai. I have tried in every way possible to perform the function of forced regeneration of the dpf, but it does not work, it always tells me that it cannot communicate with the ecu when I do it. This, someone has managed to regenerate the diesel particle filter dpf with this product, thanks.
If you've got the wrong codes in your car, it will not be for it for safety reasons if your DPF is too blocked, it will not be for me for safety reasons. It sounds like maybe you have another problem here. What I mean is. Is it's going to be too dangerous to do a region? Chances, are you have a complete blocked filter? Which will need to be clean in another way? Or maybe the scan tool just won't work on this particular vehicle.
@@bodgitandleggitgarage My car has no problems with the DPF filter, there is no error or problem, but I bought this scanner to have among other functions the ability to regenerate the particulate filter, in the menu it comes to regenerate dpf, the exact model of my car and the year, when I use that option the scanner crashes after saying that there is no communication with the ecu, the seller now says to buy another, I have the nt 650 elite and wants me to buy the nt644, but what if the same thing happens to me .. .. my car is hyundai i40 crdi, I think I'm going to look for another brand of scanner, I do not want to buy another one more than double the price and that does not work either, thanks for your attention, I will try to find one that has been tested in hyundai Before buying another. DPF service regeneration Foxwell NT650 Elite: ruclips.net/video/hcyCR0S_kE0/видео.html
So, having recently got this Foxwell NT644, as per my previous post, what is its coverage on EPB compared with the EBS301 like, the reason I ask is I now (this week just got) have a pg 508SW 2017 with EPB ???, keep up the good work. Oh have you used the 644 for an EPB job?
Great vid Leon. They are not bad scanners I use foxwell nt630 keep it in top of box and handy if you need to pull codes from a car I’ve yet to find a better scanner for 180 quid another good scanner for the money is autel maxisys ms908 Cheers Jamie
Vdubs 60 yes mate you definitely can't complain for the money I also the free updates are a big plus as well trying to get my hands on the Foxwell gt80 looks to do what the autel does will be interesting to see it send them a message and you never know we might get our hands on one thanks a lot for watching
please can you recommend a fault code reader that dosent just do engine codes but can do airbag, abs and traction control codes as well but doesn't cost the earth thanks guys
panzer fan 131 that's the Holy Grail right there mate very difficult for me to say as there is a lots of aftermarket Chinese copies out there that do a great job I just don't know enough about them and had enough experience with them to recommend one that does what you want but the delphi one might suit you
Hello after seeing your foxwell nt644 pro video I was wondering if it would work for a slk verio roof we have 5 cars spread around the family and looking for a scanner to use on them all would the foxwell be the best option. Thanks Jeff
Jeffrey Pugh hi mate unfortunately I cannot say because I've never used this cancel for that roof also no matter how much money you spend once cancel will not do everything your best bet is maybe buying the cheap Chinese scandals just for Pacific cars this might be your best option
That extreme button pressing woud make me crazy. Easy to get used with touchscreen and a pro3 software with "all in". wireless and my phone have bigger screen then 644.
Great review video Leon on the scanner. It looks to be a very capable tool and especially nice is the free updates. Yes, you need that granddaddy GT80 tablet Scanner. That one looks really nice and I surely hope you can get it! 😀👍
Nice bit of kit....Love obd2 scaners....but as my calibra is pre OBD2 I have a OBD2 "china clone" and lead adapter....works ok and can program key chips too....nice with my 8v engine....some C25xe (v6) engines/ecu it wont talk to it.....
mark sealey hi mate there's not really a lot of sensors on them engines you can get a tool that will do it but even a cheap oscilloscope will help you a lot if you have to test senses
Hey I have a question for an englishman. Is it weird, maybe even really hard, to have to shift with your right hand? Or even control the radio? Say if you took a trip to north america and rented a car.
Bad Drivers of Hurst Euless Bedford hi mate to be honest it really doesn't make any difference I've driven a few cars with the steering wheel on the wrong side lol and some race cars made no difference at all peace of piss
Another great video Leon, really interesting all the diagnostics information. Also Petition is signed, we need to get you the daddy of Foxwell diagnostic equipment.
Alx li hi mate if you look at the link in the description it tells you all about what it can and can't do I'm not 100% sure myself if you check it out it will tell you thanks for watching
Hi, I hope you can help. Two days ago I bought the Multi- Application Service Tool NT650. I up dated the Scanner and for some reason I lost the soft ware and I have no icons on the home screen. I could not find on the net the down for the NT650 so I down loaded another another close to my model, but I think by memory of seeing the original icons I might have a couple missing. May be the engine symbol. I need the soft ware for my model. Regards Mario Paris.
Hi mate as you can imagine it's impossible for me to know every single scantool and how to do these types of things I've never use that particular scantool before you have to email Foxwell also it's always best to copy there SD card before you do any downloads in case this ever happens but unfortunately I cannot help you hope you understand
Thanks mate, I fixed it. I downloaded the again, and It came good. So, anyone out there has any problems, just download the card from PC Application and it will come good. Thanks again. Regards, Mario Paris.
Simon Rawle lol yes mate you tell them lol the link to the Facebook page is in the description message them there the more people I can get to message them we might be able to get our hands on this
Not bad at all for that price, at least now that it is on sale. But I think I still prefer the Autel MaxiDas, I love the 4 graphics in the same screen, speaking of which you forgot to show the "one graph" function
@@bodgitandleggitgarage thank you for your time buddy I bought it today for 150 brand new on offer it has many functions I will use as I do recovery work and often end up owning broken cars I suppose it will pay for itself eventually keep up the great content you've gained a sub
great video and very interesting scanner, definately thinking about buying one. WOULD LOVE TO SEE A PROPER REVIEW OF THE FOXWELL GT80 IN ACTION AT BOGGIT AND LEGGIT, cheers, chris.
Great vídeo me friend, I am looking to buy a scan tool ando this Foxwell is one of my two best options on market, also Autel MD808 pro is another good option I think, what do you think about? Wich is better? Foxwell NT644 Pro or Autel MD808 Pro?
Gendan in Swansea. Or any dealer who is linked to gendan. I got mine from logicautomotive in Ireland last year . With updates the tool now does milagecorrection, injectors,cvt,tpms all free as long as u own the tool. Only thing it does not do it ABS bleeding. Which I kept the autel mot pro to do on bmw
Zib187 hi mate you want to get that checked out as I'm getting free updates and I know a lot of people that are the only Foxwell system you have to pay for the updates is the gt80 after 18 months download their software I'm sure once you put your details in you will find you get free updates
i was at a snap on demo nite..im from wexford and i gave em all your youtube channel add the other nite caus i think yer videos are the bees knees..keep up the good work..u should do courses on advanced diagnostics..id pay ha
Lakshmi Narayan yes mate couldn't agree with you more for the price it's fast simple and easy to use free updates what more do you want thanks for watching
Great review, loved it. Nice details in the video. I am a Patreon, and work on my mothers Audi. But I don't need it that much. Have an Autel MS906TS. I find scan tools interesting, and I love to own and use them. The Chinese brands give so much value for money (Autel, Launch, Foxwell). Among Chinese made scanners, I know least about Foxwell. But so far yours seems like the best compact scanner out there for a DIY. And even live data graphing, wow. I'm really curious about the GT80 Mini more than the Plus version. That's their newest scanner with Win10Pro. The Plus has Win8.1Pro and I don't think it's wireless like the Mini. Anyway, hope you get that scanner and do a review. And last I wanna say, dont buy Lauch Diagun IV, I did as it is a compact Android based scanner. The newest model from Lauch. But it is more expensive and with a lot less live data functions that the NT644 Pro. It is back on Ebay again, selling it this very moment.
Krillekris thanks a lot mate thanks for watching it's going to be interesting if I get it to compared to other scanners it looks really good hopefully we get it and we will let you know
Conor Cousins I am trying mate don't know if I can do it but I am trying there is a link down below to their Facebook page send them a message the more people I can get to send them messages hopefully I will get it thanks a lot for watching
come on ppl lets bug foxwell so more on line Petition. www.change.org/p/support-foxwelluk-co-uk-foxwell-send-bodgit-and-leggit-garage-a-gt80-scanner-so-he-can-do-a-youtube-review-on-it?recruiter=731304761&
lol thanks mate
I signed. Please do this people :-)
Signed , good luck
.
I signed
Signed the petition for the Foxwell scanner. ..Hope they send you one Leon good luck...I bought a Bluetooth OBD Dongle for £6:50 From Amazon can't believe how much info it shows using either Computer app on laptop or Android phone,i just leave it plugged in permanently and my Samsung Phone connects to it automatically when I start the Engine Now have Turbo boost,G force,Inlet temp,Water temp and oil pressure gauges It also does Graphs LOL Cheap as chips..
Everybody should own a scan tool and learn the basics of how to operate it. Pays off the first time you fix your car yourself . Cheers mate.
STEVE ROB yes mate couldn't agree with you more
Totally.
I got a 407 a few months ago and I bought the Lexia3 cable on Ebay for about €50-€60. So far its helped me track down a faulty fuel regulator, two separate ABS lights, ESP(egr) fault, update my ECU firmware, install a headphone jack into the radio, recalibrate steering, sync sync a new key when I changed the ignition and then add a spare key, find broken wire in the butterfly solenoid. Probably some more stuff too. Paying a dealer €70 a go for this kind of stuff would be madness.
I did go to the dealer once about the ESP light (ended up being a stuck egr valve) they done a free scan, and told me I needed a new ABS block for €1200. lol
I bought an nt644 last week and I am really happy with it. I bought it as its able to register new batteries as needed in newer bmws etc and also the park brake reset as more and more cars have them
with the updates though I got free updates for 18 months not for life....
Shishu Ali hi mate I would get that checked out as when I contacted Foxwell they told me free updates also I am getting free updates on my Foxwell scan tools
How did we end up from this little nice and friendly scantools to TV-like scantools? It would be super nice to have bidirectional control and ecu coding and programing on the 680 pro. I honestly would prefer it over anything else. Quick and easy.
I would like to thank you, Leon, for doing this video I know it 2 years old, I have brought my own Foxwell NT650
ant time mate
outstanding! excellent presentation. My NT650 ELITE arrives today..........
I like that Foxwell scanner not just for what it can do but I like the name.Thanks for showing us what it can do
Brendan Brady fan thanks for watching mate
Hi when you show us the service light reset it came up on the screen 2007-2017 , does it not cover before 2007? thanks
Does this scanner works on Toyota Innova 2018 Diesel Model in the Phillipines?
Does this perform stop start BMS resets on fitting of a new battery? I'm looking at a tool for roadside recovery diagnostics and if this has that function built in rather than buying the stand alone battery tool then that will be handy
The Dog I am not sure mate I have always used a different tool for that job never needed this one for that so I cannot tell you if it doesn't
Ok, that's it, just obtained one, absolute dogs yollocks, starting to narrow down me battery warning failure (This was on my old car, now sold :)), just need to find 2volts :), ok, traced to supply wiring fault to battery health box (BHB) attached to the battery. The BMS (Body Monitoring System) takes reference voltage direct from the battery and compares it to that sent by the BHB. If the BHB sends wrong or no voltage value BMS flags a failure. If you disconnect supply to BHB the BMS now takes is reference fom the ABS (and not the BHB) system and works fine (exempt yor battery wont be monitored to the same extent).
Can i use foxwell nt624 on diesel engine
been very impressed with every Foxwell tool I've used.
Badgertronix hi mate I have to agree for the money and for what it can do no complaints my end
Badgertronix thats great to hear because I needed know the experience of other users of this unit before I buy it!
Hi Leon, I just bought a Foxwell NT644 pro from UK and I have some questions if you don't mind.... I connected the scanner to 2 cars, a BMW 5 Series E60 diesel from 2004 and a Land Rover Freelander 1 from 2002 also diesel .... the problem is that I don't find live data for oxigen sensors, fuel trims and a lot other data .... I found IAT, MAF, OBDSUP, MIL SIST,DTC CNT, ECT, MAP, RPM, VSS and also don't support special functions on either car... thanks, any advice is precious
Hi mate you need to go into OBD2 and not the manufacturer software you will find a lot more data pids there but you do need to use both of them to get all the data pids
Great vid Leon, I have the Foxwell NT414 Pro and for the £175 I bought if for is absolutely fantastic value for money and great for the DIY'er.
Jamie Rowland hi mate yes you just cannot beat the price for the money you pay for what you get it's just unbelievable thanks for watching
I hope you get that big Foxwell tablet, that'd be nice to see! Live data in thoes smaller scan tools are great. Every bit of information are somtimes greatly useful. Usually the smaller scan tools doesn't have free updates so that is really good too.
manwiththestar hopefully I get it to mate send them an email with the link down below hopefully we will get it also someone has set up a petition which I think is really great lol I just love my subscribers they are the best thanks a lot for watching
Question, has anyone used the NT644Pro to bleed ABS module on a 2003-2007 Honda Accord? I've heard it works on the Bosch driver, but my module looks to be made by Nissin, at least that's all I could find on the housing. I can't seem to find anywhere on the net where the Nissin tells me what software driver it uses, as it very well could be using Bosch software. I want to make sure it is capable of that particular feature as it's one I really need, but I like all the other bi-directional tests that the 644 does compared to the NT630 Elite.
Hi , I have the NT 644 pro but don’t see all the features that you have on yours like battery . Do I have to purchase for an update ?
Hi mate yes check for updates my updates for a freezer there's a good chance yours are too
Does this do the adaptations?
Does this work on a 2015 peugeot you know? Or will it work with all OBD2 cars
will i no it work on a 2013 peugeot
Well explained I have the 644 pro and it's excellent I've had it for a few yrs now and i scan all kind of cars I also own a launch as well but foxwell is my choice, very easy to update, great video, I want you review the gt80
Thanks a lot mate the GT90 is now out I would love to do with you on that but unfortunately I'm just not in the position right now to get one and foxwell will not send me one
I am going to purchase the gt90 for sure I had my nt 644 for 4 years now and it works excellent very easy to use so I expect a lot of improvement with the gt 90 i buy from foxwell factory direct, but keep the excellent videos coming
Will this recalibrate blend door actuators within the HVAC system?
i am not sure but i dont think so
does the NT644 PRO pin point the exact fault or is it just codes?
Hi mate unfortunately there is no scan tool out there even if you pay thousands upon thousands that will tell you exactly what's wrong they are all just code readers
Love your videos! Btw, whats diffrences between NT644 pro and NT680 pro
Hi mate unfortunately I don't know I've only used one of them
Hi, I bought the Foxwell NT650 Elite, my car is Hyundai. I have tried in every way possible to perform the function of forced regeneration of the dpf, but it does not work, it always tells me that it cannot communicate with the ecu when I do it. This, someone has managed to regenerate the diesel particle filter dpf with this product, thanks.
If you've got the wrong codes in your car, it will not be for it for safety reasons if your DPF is too blocked, it will not be for me for safety reasons. It sounds like maybe you have another problem here. What I mean is. Is it's going to be too dangerous to do a region? Chances, are you have a complete blocked filter? Which will need to be clean in another way? Or maybe the scan tool just won't work on this particular vehicle.
@@bodgitandleggitgarage My car has no problems with the DPF filter, there is no error or problem, but I bought this scanner to have among other functions the ability to regenerate the particulate filter, in the menu it comes to regenerate dpf, the exact model of my car and the year, when I use that option the scanner crashes after saying that there is no communication with the ecu, the seller now says to buy another, I have the nt 650 elite and wants me to buy the nt644, but what if the same thing happens to me .. .. my car is hyundai i40 crdi, I think I'm going to look for another brand of scanner, I do not want to buy another one more than double the price and that does not work either, thanks for your attention, I will try to find one that has been tested in hyundai Before buying another.
DPF service regeneration Foxwell NT650 Elite:
ruclips.net/video/hcyCR0S_kE0/видео.html
Can you please help me wicht scan tool of that one I can turn off the dashboard warning lights from ABS ON THE DODGE?
nt614
So, having recently got this Foxwell NT644, as per my previous post, what is its coverage on EPB compared with the EBS301 like, the reason I ask is I now (this week just got) have a pg 508SW 2017 with EPB ???, keep up the good work. Oh have you used the 644 for an EPB job?
Great vid Leon. They are not bad scanners I use foxwell nt630 keep it in top of box
and handy if you need to pull codes from a car I’ve yet to find a better scanner for 180 quid another good scanner for the money is autel maxisys ms908
Cheers
Jamie
Vdubs 60 yes mate you definitely can't complain for the money I also the free updates are a big plus as well trying to get my hands on the Foxwell gt80 looks to do what the autel does will be interesting to see it send them a message and you never know we might get our hands on one thanks a lot for watching
Hi , just wondered if this tool would work with my 2010 Citroen relay 2.2 hi van, thanks, Chris.
yes mate it will
please can you recommend a fault code reader that dosent just do engine codes but can do airbag, abs and traction control codes as well but doesn't cost the earth thanks guys
panzer fan 131 that's the Holy Grail right there mate very difficult for me to say as there is a lots of aftermarket Chinese copies out there that do a great job I just don't know enough about them and had enough experience with them to recommend one that does what you want but the delphi one might suit you
Can you reset an engine light with this scanner?
yes
Hello after seeing your foxwell nt644 pro video I was wondering if it would work for a slk verio roof we have 5 cars spread around the family and looking for a scanner to use on them all would the foxwell be the best option. Thanks Jeff
Jeffrey Pugh hi mate unfortunately I cannot say because I've never used this cancel for that roof also no matter how much money you spend once cancel will not do everything your best bet is maybe buying the cheap Chinese scandals just for Pacific cars this might be your best option
That extreme button pressing woud make me crazy.
Easy to get used with touchscreen and a pro3 software with "all in". wireless and my phone have bigger screen then 644.
Great review video Leon on the scanner. It looks to be a very capable tool and especially nice is the free updates. Yes, you need that granddaddy GT80 tablet Scanner. That one looks really nice and I surely hope you can get it! 😀👍
stuzman thanks mate thanks for watching let's hope we get it would be nice to see what it can do
Nice bit of kit....Love obd2 scaners....but as my calibra is pre OBD2 I have a OBD2 "china clone" and lead adapter....works ok and can program key chips too....nice with my 8v engine....some C25xe (v6) engines/ecu it wont talk to it.....
mark sealey hi mate there's not really a lot of sensors on them engines you can get a tool that will do it but even a cheap oscilloscope will help you a lot if you have to test senses
that's what I like about it....nice and simple lol
Hey I have a question for an englishman. Is it weird, maybe even really hard, to have to shift with your right hand? Or even control the radio? Say if you took a trip to north america and rented a car.
Bad Drivers of Hurst Euless Bedford hi mate to be honest it really doesn't make any difference I've driven a few cars with the steering wheel on the wrong side lol and some race cars made no difference at all peace of piss
Will it work on a Toyota Aqua?
Another great video Leon, really interesting all the diagnostics information. Also Petition is signed, we need to get you the daddy of Foxwell diagnostic equipment.
125 SM lol yes mate couldn't agree with you more we need to get it thanks a lot for watching
Olá, qual a diferença entre eles?
How does the 644pro compare to the 510 ? Which is better
easyaccess2 KD I don't know I have not used the 510
I think this is the better answer I read: www.foxwellsupport.com/foxwell-nt510-vs-nt624-vs-nt644-vs-nt414/
Does anyone know why the #12 feature
Throttle position reset (tps) don’t appear on the NT 510 scanner
Hello, are you happy with foxwell nt 644pro because I'm going to buy
Bro i updated my foxwell and it doesn’t support my xterra 2010 most of function .. maybe it’s need software for my car kind!
Hi mate you'll have to contact Foxwell they'll tell you what the problem is
Thanks mister nice Regards from Holland
Cheers mate after seeing this I bought a nt650
Does the NT644 pro have coding and programming capabilities
no mate
Does it works in mexican and Brazil Made Cars like toyotas,nissan , hondas and wolkswagens?Can this Foxwell Reade their codes?
Alx li hi mate if you look at the link in the description it tells you all about what it can and can't do I'm not 100% sure myself if you check it out it will tell you thanks for watching
Looks like a reasonable scanner for the money. I like the colour screen too. Does it do graphs too?
Jane Calder hi mate yes it does do graphs 10:57 I didn't go into a lot of detail on that but you can see it will do it thanks a lot for watching
Hi, I hope you can help. Two days ago I bought the Multi- Application Service Tool NT650. I up dated the Scanner and for some reason I lost the soft ware and I have no icons on the home screen. I could not find on the net the down for the NT650 so I down loaded another another close to my model, but I think by memory of seeing the original icons I might have a couple missing. May be the engine symbol. I need the soft ware for my model. Regards Mario Paris.
Hi mate as you can imagine it's impossible for me to know every single scantool and how to do these types of things I've never use that particular scantool before you have to email Foxwell also it's always best to copy there SD card before you do any downloads in case this ever happens but unfortunately I cannot help you hope you understand
Thanks mate, I fixed it. I downloaded the again, and It came good. So, anyone out there has any problems, just download the card from PC Application and it will come good. Thanks again.
Regards,
Mario Paris.
nice job mate
can one correct mileage with this device ?
no mate
Do you still have the reader?
yes mate
go on fox well give him one to try . id like to see how it compares to the verus.
Simon Rawle lol yes mate you tell them lol the link to the Facebook page is in the description message them there the more people I can get to message them we might be able to get our hands on this
Simon Rawle thanks a lot for watching mate
Not bad at all for that price, at least now that it is on sale. But I think I still prefer the Autel MaxiDas, I love the 4 graphics in the same screen, speaking of which you forgot to show the "one graph" function
hi mate no i did not 10:57
oh sorry, I went directly to the live data section, was expecting to see it there, thanks for pointing it out
David S. Lol no problem mate thanks a lot for watching
Hi.Will be work for volvo s80 2010.Dpf Eolys fluid refill restart?.Great wideo!!!
Ok that's good i would love to have it
We don't have Skoda in the States. I think all the other countries have them.
1970chevelle396 hi mate they are the same as the Volkswagens Audis just with a different shell on top thanks for watching mate
Will this do a regeneration one 2018 vw caddy
I have done it on a 2015 so I cannot see why not but I haven't done it on a 2018
@@bodgitandleggitgarage thank you for your time buddy I bought it today for 150 brand new on offer it has many functions I will use as I do recovery work and often end up owning broken cars I suppose it will pay for itself eventually keep up the great content you've gained a sub
@@thecarpfather5757 thanks a lot mate hopefully you enjoy mate other videos
great video and very interesting scanner, definately thinking about buying one.
WOULD LOVE TO SEE A PROPER REVIEW OF THE FOXWELL GT80 IN ACTION AT BOGGIT AND LEGGIT, cheers, chris.
yes yes yes yes lol
If you don't work in a shop it's pointless. Plus you have to pay for updates on these one unlike the rest of the foxwell it's lifetime updates.
You can use this to bleed abs brakes
where are they made
Great vídeo me friend, I am looking to buy a scan tool ando this Foxwell is one of my two best options on market, also Autel MD808 pro is another good option I think, what do you think about? Wich is better? Foxwell NT644 Pro or Autel MD808 Pro?
Carlos Vallejo hi mate I've only ever use the Foxwell so unfortunately I cannot advise you which one as I've only use one of them
Ok, no problem and I have another question my friend, talking about Throttle Body Adjustment, this Foxweel NT644 Pro has a lot of coverage?
Hi mate it has no bi directional controls on its
Oh that´s confusing for me because in the Foxwell Web they say that this NT644 Automaster Pro has the function of Throttle body adjustement...
Carlos Vallejo it has TPS settings
Hi everyone.cheap tools to reset idle.. . Suggestions please.. Tnx
Would this tool do vauxhall zafira tourer 2013
where can i buy a foxwell nt 644 with life time updates
i got my from the uk
Gendan in Swansea. Or any dealer who is linked to gendan. I got mine from logicautomotive in Ireland last year . With updates the tool now does milagecorrection, injectors,cvt,tpms all free as long as u own the tool.
Only thing it does not do it ABS bleeding. Which I kept the autel mot pro to do on bmw
hi does it have throttle relearn? thank you
yes on some cars
Tba worked a threat on the misses mk4 golf.
Hi
So now with this one can you send the data results to your customer via email?
you can
Will this thing do srs reading?
yes mate
Foxwell's website states that the NT644 includes "18 Months free update, Update cost is 100USD/year after 18 Months".
Zib187 hi mate you want to get that checked out as I'm getting free updates and I know a lot of people that are the only Foxwell system you have to pay for the updates is the gt80 after 18 months download their software I'm sure once you put your details in you will find you get free updates
Zib187 after 3rd July 2017 the updates are free for anyone with a live subscription or and one who purchase the tool aftet that date.
It's free update lifetime now, GT80 is free update for 3 years.
Nice job with the review mate. Leon you got me saying mate now
Lol always the problem when I see things on RUclips too I need to save for them thanks for watching mate
qual o valor dele ai ?
Can this take off air bag light on my audi a4
It can read the codes and reset it if there is no permanent fault
Love your videos, well explained. Thank you.
thanks mate
Great review
everyone sign up looking forward to a review on the gt80
colin mcgrath thanks mate much appreciated thanks for watching there's no guarantee I'll get it yet but let's hope
Dear Colin, now the latest tablet is GT90, thanks for your support on Foxwell
Does it make tea?
yes yes and coffee and breakfast
Nice video im thinking to buy nt415
thanks mate i have not use 1 if them
queo comprar um desse ele e bom ?
i was at a snap on demo nite..im from wexford and i gave em all your youtube channel add the other nite caus i think yer videos are the bees knees..keep up the good work..u should do courses on advanced diagnostics..id pay ha
Conor Cousins wow thanks mate that's much appreciated I am going to do in a lot more diagnostic videos so you don't need to pay a bill be on here lol
Like to see the gt 80 tablet scanner
my 2 lol gt 90 out now
DPF?
Bmw-alpina service Ltd. 27:19
Didn't think k about scanning a healthy car 👍
It is actually a great tool, I'm a user of this tool from past couple of months
Lakshmi Narayan yes mate couldn't agree with you more for the price it's fast simple and easy to use free updates what more do you want thanks for watching
I picked a demo piece on clearance sale to have the cut on the price
nice job mate
Foxwell NT500 It will be good to Fabia III 1.0 TSI 110KM 2018 year ??
Sorted
Great review, loved it. Nice details in the video. I am a Patreon, and work on my mothers Audi. But I don't need it that much. Have an Autel MS906TS. I find scan tools interesting, and I love to own and use them. The Chinese brands give so much value for money (Autel, Launch, Foxwell). Among Chinese made scanners, I know least about Foxwell. But so far yours seems like the best compact scanner out there for a DIY. And even live data graphing, wow. I'm really curious about the GT80 Mini more than the Plus version. That's their newest scanner with Win10Pro. The Plus has Win8.1Pro and I don't think it's wireless like the Mini. Anyway, hope you get that scanner and do a review. And last I wanna say, dont buy Lauch Diagun IV, I did as it is a compact Android based scanner. The newest model from Lauch. But it is more expensive and with a lot less live data functions that the NT644 Pro. It is back on Ebay again, selling it this very moment.
Krillekris thanks a lot mate thanks for watching it's going to be interesting if I get it to compared to other scanners it looks really good hopefully we get it and we will let you know
looks like a great tool
Drews Auto yes mate it's just one of them tools that's quick easy and handy to use thanks for watching
get the tablet foxtool one son will ya..im on the fence between snap on..autel maxidass
Conor Cousins I am trying mate don't know if I can do it but I am trying there is a link down below to their Facebook page send them a message the more people I can get to send them messages hopefully I will get it thanks a lot for watching
Love it, great video.
thanks mate
they should definitely send me the big one too 😎😂
Badgertronix no I think they should send you 2 would be funny to see if you have the same face when using this one as you did your last scanner lol
WooHooo... that means I have a chance of winning it!!! Soooorted!
lol yes you have sorted mate
Foxwell say the GT80 Plus comes with Free 18 month updates!!! Bit crap lol
update free for 3 years now.
gt80.foxwelltech.com Still says 18 months
the official site not edit timely, www.foxwelltool.com/wholesale/gt80-plus-diagnostic-platform.html it says 3 years.
Wonder if this is a UK thing, We always get a bum deal here
WhitwellMike B
brilliant idea of testing your car when it's still healthy
Aidan Skinner hi mate yes 100% the only way to get S good cars first you will know what is good then and it will make your life easier in the future
Looks great!buy from foxwelltool？
Elsa Kent thanks mate thanks for watching
I wanna see the f-n gt-80
lol me 2
Petition signed..
thanks mate
I wanna see the GT80!!!
me 2 mate
Hi Chris, now the latest version is GT90, hope it's not too late, anyway, thanks for your interesting in Foxwell
foxwell......let us foxwell too
nao compre o nt 644 pro no brasil porque e falço
GT coming soon ;-)
Marius Kub lol let's hope so
send it!!!
Lee Simpson yes I agree mate lol
I am poor I have not maney fir buy fox the war in libya help me