Tell the Ivers family ESPECIALLY Dennis to watch the mini tractors plowing at Alvardon Ohio plow days They had 1206 with front wheel drive mini pulling three bottom plow AWESOME LITTLE piece
Another great video Reese! Didn’t realize how much we need our Ivers Farms fix every week but you all need a break before the huge push at harvest. Have a great and safe week.
A typical farm week...for everything you complete, always have more waiting in line. Always nice to get the odd jobs done ahead of the busy seasons. Tire problems are commonplace whatever the size of the farm!!! Aggravating if you ruin a good tire rather than some half rotted piece of junk that seems to keep going despite having used 7 and three 4ths of its 9 lives LOL.
Have IH put the 1st 50 hrs on them so we don't go through what we went through last fall.....I know it's a stretch. You just have to believe people do there jobs. What a concept. Love Ivers. God luck this fall.
Really enjoy watching your channel. I grew up on a small farm near Cisne, Il and went to Wabash Valley in the mid 70s. Watching your videos takes me home for a few minutes every week. Thank you so much!
Good video glade you guys got a good rain that will help too finish out corn crop Jay did good job putting turbo in his truck.That's a pain with the backpack sprayers.👍
Another great video, Hats of to George, never stopping is what keeps him young. Does everybody sneak up on Jay in the shop? I think Dennis shaved a few years off of him there! LOL
Reese tku you for another great video, love when you get a little of everyone involved, so does this mean we will never get to meet BIGFOOT just the odd sitting, 💖🙏
Garrett the Bigfoot 😂😂😂 I do want to make a suggestion when load truck with excavator. Never blind side load. Always have the cab towards the truck and swing over the back like you were. Hard to see swingin to the right like that.
@@gregjames5070 that’s why you don’t have anything nice. You’re to narrow minded and just tear things up without thinkjng. Plus you’re not very bright either because you would have picked up on the word suggestion. 🤣 keyboard warrior.
The 3 Case combines you took in look brand new. You folks sure do take care of your equipment! You read my mind while I was watching this vid about Garrett. I wondered why we never see him. He must be camera shy.
quick question Mr. Ivers, i'm stuck in the city, wishing I was working a farm, but can you explain to me why you guys trade in combines every 12 to 24 months. Seems like they don't pay for themselves in such a tight window. GReat work, enjoy your show.
Hopefully you all receive the 3rd combine before harvest starts. I was fixing to comment about why doesn't Garrett like the camera and then you mentioned he is the Ivers Farms bigfoot lol.
Hey guys if you don't mind how much is a combine that is the one u got knew I know it is a tool for your operation thanks for your responding and making good videos GOD BLESS
Hi folks, you definitely have one of the better farm sites show casing what American Farming is all about. I notice you folks use a lot of Milwaukee tools, a once great American name brand name in tools.I recently learned that Milwaukee is now owned by a Chinese Mfg. I am 79 years young and recently had to sell my JD equipment dealer ship for health reasons. For over 45 years with JD I watched more and more Chinese made goods creep into our system and the erosion of quality. Today I go way out of my way searching for non Chinese made goods that I need. We need to stop supporting China with our purchases of Chinese made products. We develop everything and they steal it from us. Unless our political leaders get their heads out of their butts soon you farmers won't have the China market to sell to because they will have stolen our technology for your grain. I for one think we can do something for our country by buying non China made products. Thanks for supporting America. Louie
@@iversfarms I'm hearing there is supposed to be a 700 plus horsepower model introduced at the farm progress show at the end of August. I guess it will be an add on model, with a few styling differences, and a little more power and weight.
My husband and I follow your channel from our farm in Virginia. Today Dave said I just want to know if you bought or leased those three beautiful combines. I said let’s just ask. Thanks for your response. Reba Heizer Fairfield,Va
What are your thoughts on trading in the combines that look fine yet?.......Still have good resale value? avoid break downs? get newer technology? etc.
Unless they are going to run 16row corn heads a x9 doesn't make sense. My buddy runs one and with a 12 row head he has to go really fast to run it at a reasonable capacity level. It's really a 16 row machine.
I dare you guys to get an electric truck. You got the bike. Now every farmer in the country side has one too. No turbos to blow up either. Its kinda like when they said u aint a farmer unless you got a boat, then it was a backhoe, then dozer, trackhoe, airplane. The list goes on. Now its electric truck. Lol
REESE, Aint it a hassle to have to hold that stick w the camera? I need my 2nd arm. They make a skull cap cam mount & it works great, hold the cam steady records what you see BUT, it makes you look like an idiot wearing it. I have longed for somebody to take a ballcap & fab a cam mount inside the front of the hat to hold the go pro & look out a little hole in the front but so far it hasnt occurred to anyone but me. !
I know you folks hear this from a lot of people, but i just love following your farm. Really enjoy the videos, thank you!
Glad you guys are back! Missed you guys last Sunday
Tell the Ivers family ESPECIALLY Dennis to watch the mini tractors plowing at Alvardon Ohio plow days They had 1206 with front wheel drive mini pulling three bottom plow AWESOME LITTLE piece
To the WHOLE crew --- thanks. Thanks4Sharing. always a pleasure.
Another great video Reese! Didn’t realize how much we need our Ivers Farms fix every week but you all need a break before the huge push at harvest. Have a great and safe week.
Awesome looking new combines Ivers Farms
You were sneaky and got the Smoke Show on camera! I hope you all had a vacation.
I live in Western Iowa. I had 6 inches of rain in 4 hours Wednesday morning. We needed it. This is our 2nd year in drought.
Happy Sunday
Another good one Reese i really enjoy watching your videos every Sunday the Ivers are a top family 👍
What a great family.thanks for sharing 😊
Great job installing the turbo on the truck Jay
Please don't stop the videos. I love them and all of the family characters. This is the best.
A typical farm week...for everything you complete, always have more waiting in line. Always nice to get the odd jobs done ahead of the busy seasons. Tire problems are commonplace whatever the size of the farm!!! Aggravating if you ruin a good tire rather than some half rotted piece of junk that seems to keep going despite having used 7 and three 4ths of its 9 lives LOL.
Hope you folks are doing ok, see Taylorville had a pretty bad storm, you and your family take care Reese!!! and thank you for another quality video!!!
Have IH put the 1st 50 hrs on them so we don't go through what we went through last fall.....I know it's a stretch. You just have to believe people do there jobs. What a concept. Love Ivers. God luck this fall.
Man there at the beginning, he was looked like he was ready to dodge a wepon!😂
Glad to see you back this week. Really enjoy your videos !!
Great video Reece Dennis Jay and George
Really enjoy watching your channel. I grew up on a small farm near Cisne, Il and went to Wabash Valley in the mid 70s. Watching your videos takes me home for a few minutes every week. Thank you so much!
Hello to Smoke show.😊
Mornin Reese hope you enjoyed your vacation 👍
That red paint sure looks pretty. Love all your content. Thanks for posting.
Good video glade you guys got a good rain that will help too finish out corn crop Jay did good job putting turbo in his truck.That's a pain with the backpack sprayers.👍
Good to see you guys
Thanks for the update. Always enjoy them. 👍🙏
So Jay is not your go to guy in a panic situation lol! Thanks again for sharing
Great stuff, sure hope the new bines are trouble free! Best of luck on harvesting!
@ 0:20 Jay’s look, I laughed my ass off, even rewatching it a few times, always great when Dennis scares him!
Another great video, Hats of to George, never stopping is what keeps him young. Does everybody sneak up on Jay in the shop? I think Dennis shaved a few years off of him there! LOL
Great job running the excavator Reece
One season or two on the combines ???
Jay for president :)
Reese tku you for another great video, love when you get a little of everyone involved, so does this mean we will never get to meet BIGFOOT just the odd sitting, 💖🙏
Cant wait for harvest vids!!
Garrett the Bigfoot 😂😂😂 I do want to make a suggestion when load truck with excavator. Never blind side load. Always have the cab towards the truck and swing over the back like you were. Hard to see swingin to the right like that.
Their truck and equipment they can load how ever they want.
@@gregjames5070 that’s why you don’t have anything nice. You’re to narrow minded and just tear things up without thinkjng. Plus you’re not very bright either because you would have picked up on the word suggestion. 🤣 keyboard warrior.
My dream combine ,nothing like big red imo.
Congrats on your new combines. Have a great week.
Great. Well done.
Great video I'm glad your back
Great Video! Thanks for share it! 👍👍👍👍... Greetings from Brazil!🇧🇷🇧🇷🇧🇷🇧🇷
Diesel creek as a video today putting in a turbo. Yes he had a torch the bolts out. Rebuild from area diesel
Where did your dad get the bed for his Ford pickup? Thanks for the videos.
The 3 Case combines you took in look brand new. You folks sure do take care of your equipment! You read my mind while I was watching this vid about Garrett. I wondered why we never see him. He must be camera shy.
Glad to see your mower is like every one we have ever owned....tore up pto shields. Not sure how you keep them from being destroyed.
Grease,care
Jay is as nervous as a cat in a room full of rocking chairs!
Jay is great entertainment in scared situations! I feel sorry for him but his reactions are hilarious to me. Thanks for the video.
quick question Mr. Ivers, i'm stuck in the city, wishing I was working a farm, but can you explain to me why you guys trade in combines every 12 to 24 months. Seems like they don't pay for themselves in such a tight window. GReat work, enjoy your show.
Just depends on the deal. They have warranty for 2 years and breakdowns cost a lot so that’s worth quite a bit
Where did you guys get that service bed for the red super-duty?
What was wrong with the old ones
Ford Heaven #FOMOCO #SUPERDUTY #BESTINCLASS
How many acres of grain are you farming now?
How many hours on those combines that went back?
Hopefully you all receive the 3rd combine before harvest starts. I was fixing to comment about why doesn't Garrett like the camera and then you mentioned he is the Ivers Farms bigfoot lol.
Nice Vid !
The new combines have the Pro 700 display or the new 1200?
Still 700 I think
great video wheres david
Didn't know you could get Milwaukee sprayers😆, might have to get a dewalt beings thats what I got for tools.
Hey guys if you don't mind how much is a combine that is the one u got knew I know it is a tool for your operation thanks for your responding and making good videos GOD BLESS
Around $750,000.00 for a new 9250
Anyone know why, what looks to be a hundred CaseIH combines sitting out in the weather at the factory in Grand Island, NE?
Do you guys trade in combines every year? Do you lease them?
Own and it just depends on the deal. One of these were 2 seasons old and the other two were only one year old
Hi folks, you definitely have one of the better farm sites show casing what American Farming is all about. I notice you folks use a lot of Milwaukee tools, a once great American name brand name in tools.I recently learned that Milwaukee is now owned by a Chinese Mfg. I am 79 years young and recently had to sell my JD equipment dealer ship for health reasons. For over 45 years with JD I watched more and more Chinese made goods creep into our system and the erosion of quality. Today I go way out of my way searching for non Chinese made goods that I need. We need to stop supporting China with our purchases of Chinese made products. We develop everything and they steal it from us. Unless our political leaders get their heads out of their butts soon you farmers won't have the China market to sell to because they will have stolen our technology for your grain. I for one think we can do something for our country by buying non China made products. Thanks for supporting America. Louie
😂😂😂😂😂🤦♂️
How's Damon doing with the yards? Weeds are growing faster than the grass in western IL.
Did you take them to Princeton? I thought there was 3 there yesterday that wasn't there last week going to Nashville
All excited hoping to see a lexicon.
Good video! Any new 2024 645 Quadtrac's coming this Fall/Winter?
There’s nothing be on order, not sure when it’ll be here
@@iversfarms I'm hearing there is supposed to be a 700 plus horsepower model introduced at the farm progress show at the end of August. I guess it will be an add on model, with a few styling differences, and a little more power and weight.
Y’all hiring? I’m looking to move out that way very soon.
Why aren’t plant in that large area you were mowing?
Planting
My husband and I follow your channel from our farm in Virginia. Today Dave said I just want to know if you bought or leased those three beautiful combines. I said let’s just ask. Thanks for your response. Reba Heizer Fairfield,Va
Bought
I am dammm glad i met you the other day. K so where were you Reese, i drove for two days t eat you annd you were powdering your nose. I would swear.
So you trade every year
Not usually
Looks good to me
Whats the reason for picking case over other brands?
Dealership, deal, and performance
@@iversfarms dealership is very key yeah
What are your thoughts on trading in the combines that look fine yet?.......Still have good resale value? avoid break downs? get newer technology? etc.
Milwaukee tanks are known to have problems. Contact there support.
You're supposed to remove the cab to work on the engine.
Talked about it
Go big red
Good to have ya back. Are you replacing the 9250's with new 9250's? Maybe try to demo an X9 1100 sometime??
Unless they are going to run 16row corn heads a x9 doesn't make sense. My buddy runs one and with a 12 row head he has to go really fast to run it at a reasonable capacity level. It's really a 16 row machine.
I dare you guys to get an electric truck. You got the bike. Now every farmer in the country side has one too. No turbos to blow up either. Its kinda like when they said u aint a farmer unless you got a boat, then it was a backhoe, then dozer, trackhoe, airplane. The list goes on. Now its electric truck. Lol
My harbor freight backpack works great lol
But who is Garrett
Reese's brother, Dennis' oldest child
I like chevrolet duromax And john deere combines the x9
I was hoping maybe you guys would have gotten X9 combines to try for a year or two
Only carbon boom sprayer ive seen on youtube
👍👍 📷📸
More crop footage less walking around talking. I like to see how your crops are progressing versus us here on the east coast
REESE,
Aint it a hassle to have to hold that stick w the camera? I need my 2nd arm.
They make a skull cap cam mount & it works great, hold the cam steady
records what you see BUT, it makes you look like an idiot wearing it. I have
longed for somebody to take a ballcap & fab a cam mount inside the front
of the hat to hold the go pro & look out a little hole in the front but so far it
hasnt occurred to anyone but me.
!
Use one every once in awhile
Found on road dead lol
f--cked over rebuilt dodge
Be careful with the jokes 🥶👍🇳🇴🐏🐂
👍👍👍👍👍👍👍👍👍
😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
🌽🌽🌽🌽🌽🌽🌽
If ya got a lift, pull the cab off the Ford. Seems like alot, but they come off easy.
I thought Garrett was a folk lore
im sory for that coment.haveing a bad day