OMG!!! Xavier you're a wizard! I must have searched through a hundred or more youtube videos without joy but then i stumbled upon your tutorial, it worked straight away. PLEASE PLEASE keep posting your videos. Amazing. thanks a million.
I purchased both. The Integra goggles with the RC Motion 2 remote controller to be paired with my Mavic 3 Pro. It's good to know I can still use my RC Pro controller if I choose. Thanks a million for another stellar video. 🤙
You did an excellent job with this pairing instructional video! You covered everything step by step and were completely thorough. Thank you Xavier, with these kind of instructions I will deffinately subscribe to your channel....
Great turtorial! Are there any drones you can remotely start up. I wish I could just grab a joystick, flip it on and the drone powers on, goggles power on, and everything is ready to go. I'm up in the air in like 10 seconds. I don't a 2-3 minute checklist.
Hi Xavier, I have a Mini 3 Pro and also a Mini 4 Pro, I try exactly as you show on my Mini 3 Pro with the RC Controler, when it is on the Air as soon As I turn my Googles 2 on, the Mini Pro 3 start descending to land? Did you try it with the Mini pro 3? Thanks
If you live in the United States of America, remote ID will require a GPS module to broadcast data when flying! Because the goggles Integra has GPS already built in, you won't need to tether another device to the controller or attach a module to the Drone! If you don't live in the US, I guess it really doesn't matter right now, however the goggles Integra is more affordable and other countries tend to follow in the same footsteps as America!
If you are in restricted airspace, yes you will be restricted! However many parts of Manhattan do not have restricted airspace! I would advise you to know your airspace before flying in areas like Manhattan! Check out this video for more on airspace: ruclips.net/video/LfAhnXb9qFk/видео.htmlsi=eoiU3ckecVNY78QC
Thanks for the very helpful video. I recently purchased the Goggles 2 to accompany my Mini 3 Pro and Mavic 3 Classic + RC Controller. I like them despite their shortcomings - which I wish were covered here and elsewhere on RUclips offering this solution. That is that many of the controller features are inoperable - namely the photo and video buttons (kinda important for this kind of drones). Also you have to repeat the turn off goggles-launch drone-restart the goggles sequence if you land. Here’s to hoping that DJI resolves these issues in future firmware releases. It’s still a great tool to enhance your flying experience!
Hello, buddy. I appreciate much your insights and contents. What about the Mavic 3 pro cine? What is the motion controller version to use the air 3 or mini 4 pro ? Thank you
Great video thank you very much. I my eyes the RC n1 integra mini 3 pro is the best mode of of operation by far! Are you able to compare latency between RC controller vs mini 3 paired to integra or compared to Avata (40ms)? To me latency feels like 100ms with Integra?
Hi, so I'm planning to buy air 3. Do you know if it will work with google 3 + rc 2 controller? Or it will only work with their motion controller 3 in fpv mode? Thanks in advance
When flying with my Intergra googles, how can I send the screen to an alternative screen for my ‘spotter’ to see, in the same way I can when flying with my RC Pro?
😭😭😭😭 im thinking of getting the mini4pro combo then fly with my g2i, then i saw this clip….. much thank you for your in4… im back down a lil bit and change my mind.
Why is that did they remove support I have an air 2s and I'm looking at getting the mavic 3 and a fpv headset as I have more use for that then getting an avata 2.
@@xavier_arthur The Goggles Integra. The only two drones that show up on the Status 'switch' screen are the Avata and the DJI 03 air unit. No other drone options are listed. Just bought the goggles today.
@@xavier_arthur I just did a firmware update with my phone and the multiple drone options appear now. But I can't get the goggles to pair with my Mini 3 Pro now FML>
A major problem you did not discuss: I set my Integra to record both (i.e. Goggles and drone); but, none of the Integra and my Mini 3 Pro failed to record. The record button on my DJI RC seems not working either.
is there a way to use the mini 3 not the pro version with goggles? and an rc controller see i have the mini 3 wiht a nice screen on my controller all i want is fpv with it im being told only the pro version and only with that stupid hand controller thing thats not what i want i want my controller and fpv goggles is there a hack availible? etc etc
Well I bought the goggles 2 for my mavic 3 …your hack worked perfectly except when I take off the goggle the screen on my rc pro still stay blacked out … fantastic video as aways !!!
Good video 👍.... I just tried to do this on my mini 3 pro and goofed, as it didn't work & I assumed they had prevented it from working any longer in recent firmware updates. Looks like I just goofed the sequence up a bit, so I look Forward to getting it working with the goggles again. I personally will never buy DJI products again, as they don't ever give us the features we request even on so called "PRO" models & are happy to roll out a new product and expect you to pay thousands more dollars just a year or so later to get what you asked for. Screw that.... Next goggles I buy will be HD ZERO or something & use walksnail or whatever. I'm done with DJI, only took me 1x drone to be fed up with their BS. 😂 LOL Too bad too, they do have some good stuff going for them. It's not worth the problems though.
Thanks for making this! Sucks that you have to waste battery time getting airborne first, and that the interface doesn't let you x out of stupid messages like that motion one. Got a pair of integras that are coming in today for my first FPV build and can't wait to test them using my old M3P. Wanted to go with a comparable qual/perf WS or HD0 but after crunching the numbers I'm paying $540 for the DJI VTX setup vs $658 for Walksnail or $748 for HD-Zero. Given I fly cinematic DJI seems like the best choice.
So I've known about this for a while... They can't get two video feeds to work reliably at all, and in testing, sometimes the goggles drop the feed when you're using the regular controllers, and it switches back to the controller feed. It seems the risk is minimal, but it was too much for DJI to officially greenlight and endorse. I can see how that might induce panic or cause crashes if it happens at the wrong moment. I know, I know, DJI is EVIL and wants to force you to buy another controller! However, I doubt there's anyone that can deny the level of hate they would get if they ok'd use with the RC Pro or RC-N2, and something went wrong. The good news is all the rumors pointing to the Goggles 3 being more "camera drone centric" and compatible with the RC 2. The bad news is it will only work with O4 equipped drones like the Air 3, Mini 4, and upcoming Avata 2.
@@xavier_arthur No... There are hardware limitations AND if they were to try and run both feeds at once, it would degrade them both. There is only so much bandwidth. O2 had dual feed baked in AND it was at a much lower bitrate. They did it with O1 technically... I used to fly the Mavic 2 Pro with dual controllers. Here's the main problem, if they release it and it's buggy, you'll be first in line to condemn them. It won't be, "well, at least they tried..." Hahaha! The very second someone is using the goggles and RC Pro and they crash... DJI will go from Hero to Zero in 3 seconds flat! Just like how everyone was crying for the Air 2s to work with the Smart Controller. DJI gave in and released the firmware, it wasn't very good and they got totally shit on. Seriously, honestly, do you really want to use goggles to fly a camera drone that bad? If you have an RC Pro, get any goggles with a HDMI input. Ta daa!!! The Goggles 3 will fix some of this but we'll see just how many people will pony up $600 just to use goggles with an Air 3, Mini 4 Pro or Mavic 4 Pro. As you've shown, it's "easy" to fly O3 drones with the RC Pro or RC-N1 and Goggles 2/ Integra. It's funny, outside the few thousand extreme RUclips drone fans, millions of other camera drone owners, couldn't care less about goggles.
Ok I'll be okay with one feed at a time, if it's a hardware limitation! I'm not sure how stable the motion controller is and how much range it has, but I'm pretty sure the RC Pro controller 🎮 will probably have longer range!
@xavier_arthur Can't argue with that since the Motion 2 and RC Pro use the same protocols. To be honest, I'm pretty sure the move will be the RC-N2 and the Goggles 3 when it comes to flying the Air 3, Mini 4 Pro, Avata 2 or Mavic 4/ Pro/ Zoom. Since they are O4 equipped drones.
sad story bro, I am waiting on Mini 4pro to arrive, I also fly FPV>, it is so sad that you cannot use the RC2 pro and googles at the same time, you could share feed and video with friends, wife kids etc, how soo money hore hungry DJI is
I wanted to buy the Mini 4 Pro and the Goggles 3 and to use the standard controller, but DJI WON‘T LET ME !!! That‘s DIABOLICALLY BAD CUSTOMER FRIENDLINESS !!! 🤮🤮🤮
Can you see yourself Flying with these Goggles & your Mavic?
Happy Flying 😎
Thanks. You’re the first one to clarify the frustration I’ve had trying to use my Mini 4 Pro controller.
Thx, finally found a video with proper sequence that works!
OMG!!! Xavier you're a wizard! I must have searched through a hundred or more youtube videos without joy but then i stumbled upon your tutorial, it worked straight away. PLEASE PLEASE keep posting your videos. Amazing. thanks a million.
Very good advice, thank you very much.
They help me in my work for my modest channel.
Greetings from Uruguay.
How do you switch between the different lenses on the MP3?
Hi Thanks for that great video!! Can you zoom in and out while wearing the glasses?
Hi. Can you connect glasses with Mavic 3 pro in spectator mode? Perhaps in this case, a flight image will appear on the screen of the RC controller?
Thanks, Appreciate the Fantastic Information...Wow!!
Happy Flying!
@dji please offer us the RC with googles
I purchased both. The Integra goggles with the RC Motion 2 remote controller to be paired with my Mavic 3 Pro. It's good to know I can still use my RC Pro controller if I choose. Thanks a million for another stellar video. 🤙
Buddy, have you tried using the Rc pro with the goggles 2 on the mavic 3 pro alone? No motion 2 involved? Does it work?
You did an excellent job with this pairing instructional video! You covered everything step by step and were completely thorough. Thank you Xavier, with these kind of instructions I will deffinately subscribe to your channel....
Sweet yeah boy you took the words out of my mouth to DJI
Thank you for sharing your experience with the R/C controller sweet
Will the DJI Goggles 3 work with the Mavic 3 Pro?
Great turtorial! Are there any drones you can remotely start up. I wish I could just grab a joystick, flip it on and the drone powers on, goggles power on, and everything is ready to go. I'm up in the air in like 10 seconds. I don't a 2-3 minute checklist.
A huge thank you for this video! Very detailed and easy to follow.
thank you very much you clarified all my doubts with dji raveneye....a big greeting from Italy❤
You're most welcome 😊
Thanks for the tips...very good info
Great video! I tried this and it works, BUT I can't start/stop recording video.
Did you ever fiqure out how to start/stop recording???
@@destincasimiro6984 There 's no way. DJI wants you to buy a new RC.
You press the video and the photo button on conteroller (at least on my RC it works)@destincasimiro6984
Hi Xavier, I have a Mini 3 Pro and also a Mini 4 Pro, I try exactly as you show on my Mini 3 Pro with the RC Controler, when it is on the Air as soon As I turn my Googles 2 on, the Mini Pro 3 start descending to land? Did you try it with the Mini pro 3? Thanks
Hey @xavier Arthur can the googles 2 work for the specta air drone. It's like the exact replica / aftermarket brand to Dji 3
Does the goggles work with the regular Mini 3?? Not the mini 3 pro??? Please let me know
Does the googles work with dji mavic platinum?
Would the goggles work with the mavic 3 Thermal?
Just the info I was looking for...Thank you so much...
thanks, this worked with my mini3 a bit back, BUT controller would not operate the camera, i will try again, did you have any problems
No problems! My controller is able to operate the gimbal, you can operate the camera from the goggles!
Where do I get that RC Pro 2 controller screen protector?
Amazon
what about goggles 3
Another great video. Which set of goggles the best or which one would you recommend
I would recommend the Goggles Integra: because it has built-in GPS!
@@xavier_arthur
why do I need GPS in goggles ?
If you live in the United States of America, remote ID will require a GPS module to broadcast data when flying! Because the goggles Integra has GPS already built in, you won't need to tether another device to the controller or attach a module to the Drone!
If you don't live in the US, I guess it really doesn't matter right now, however the goggles Integra is more affordable and other countries tend to follow in the same footsteps as America!
The real down side is both goggles can’t do head tracking with the remote, instead of motion controller 2….now that is a bummer.
hey man i was just wondering if dji will restrict my drone in anyway when i fly it in manhattan thanks!
If you are in restricted airspace, yes you will be restricted!
However many parts of Manhattan do not have restricted airspace!
I would advise you to know your airspace before flying in areas like Manhattan!
Check out this video for more on airspace:
ruclips.net/video/LfAhnXb9qFk/видео.htmlsi=eoiU3ckecVNY78QC
@@xavier_arthur thanks so much! but does the altitude limit enforce itself?
@@prazofficialbro do your own research for the area and equipment.
How good is the view in the goggles? What if I use glasses for reading or close up, do I just put the googles on over my glasses
The Integra comes with multiple lenses for varied eye sights. Glasses not necessary.
you can adjust the diopters on the goggles 2
I ordered the goggles 2 to use with my Mavic 3 pro. This video was the best one to help me figure out what goggles to buy.
How did you get on with that? Can you switch between the different lenses while wearing the goggles?
Will this setup work with mini 4 pro?
Yes and no, please watch the video I explained everything in detail when I left the field and went back home!
Yea being able to use all the drones features and just use the goggles to recieve the video feed I want that.
Thanks for the very helpful video. I recently purchased the Goggles 2 to accompany my Mini 3 Pro and Mavic 3 Classic + RC Controller. I like them despite their shortcomings - which I wish were covered here and elsewhere on RUclips offering this solution. That is that many of the controller features are inoperable - namely the photo and video buttons (kinda important for this kind of drones). Also you have to repeat the turn off goggles-launch drone-restart the goggles sequence if you land. Here’s to hoping that DJI resolves these issues in future firmware releases. It’s still a great tool to enhance your flying experience!
어떤 제품인지 알고싶습니다 저두 매빅3미니 사용중인데 고글을 사용하고싶습니다
@@이교민-e5r Hello! i am using both the Mavic 3 Classic and Mini 3 Pro with the Goggles 2 and RC Controller. HTH
Lots to learn. Good job. THANK YOU. STAY FREE
Can't thank you enough for this. Also can't believe dji left us with such a jank option, but really appreciate the walk through
Hello, buddy. I appreciate much your insights and contents.
What about the Mavic 3 pro cine?
What is the motion controller version to use the air 3 or mini 4 pro ? Thank you
Great video thank you very much. I my eyes the RC n1 integra mini 3 pro is the best mode of of operation by far! Are you able to compare latency between RC controller vs mini 3 paired to integra or compared to Avata (40ms)? To me latency feels like 100ms with Integra?
Do you have issues recording video with mini3 pro with integra and RCN1?
Does head tracking work with this configuration?
Hi, so I'm planning to buy air 3. Do you know if it will work with google 3 + rc 2 controller? Or it will only work with their motion controller 3 in fpv mode?
Thanks in advance
When flying with my Intergra googles, how can I send the screen to an alternative screen for my ‘spotter’ to see, in the same way I can when flying with my RC Pro?
😭😭😭😭 im thinking of getting the mini4pro combo then fly with my g2i, then i saw this clip….. much thank you for your in4… im back down a lil bit and change my mind.
Nice video! Thanks. I have Air 3 and actually prefer to use the motion controller, which I use with Mavic
So do these goggles not work with the mini 3.. not pro?
I just tried this with my RC N1 controller. Also works. Must remember not to update my firmware ever again..
Why is that did they remove support I have an air 2s and I'm looking at getting the mavic 3 and a fpv headset as I have more use for that then getting an avata 2.
thanks
My goggles only show the avata and one other drone. No mavics show up in the menu to choose from... Any ideas?
Which goggles do you have?
@@xavier_arthur The Goggles Integra. The only two drones that show up on the Status 'switch' screen are the Avata and the DJI 03 air unit. No other drone options are listed. Just bought the goggles today.
@@xavier_arthur I just did a firmware update with my phone and the multiple drone options appear now. But I can't get the goggles to pair with my Mini 3 Pro now FML>
Ok its finally connected. I forgot to hold the goggles power button down to bind them. And I hate technology. lol
Well done ✅👍💪
Enjoy 😊
A major problem you did not discuss: I set my Integra to record both (i.e. Goggles and drone); but, none of the Integra and my Mini 3 Pro failed to record. The record button on my DJI RC seems not working either.
Good to know. I was planning to get one to pair up with my mini 3 pro too.
is there a way to use the mini 3 not the pro version with goggles? and an rc controller see i have the mini 3 wiht a nice screen on my controller all i want is fpv with it im being told only the pro version and only with that stupid hand controller thing thats not what i want i want my controller and fpv goggles is there a hack availible? etc etc
just tried this with goggles 2 and and mini 4 pro wont work says connecting but the remote will stay on and it never connects untill i rebind
I literally just bought a used motion controller 2 to fly my mini 3 pro with my goggles 2. Should've checked Xavier's channel first!
Thanks for the help.
Now the fun begins.
/ Anders
Well I bought the goggles 2 for my mavic 3 …your hack worked perfectly except when I take off the goggle the screen on my rc pro still stay blacked out … fantastic video as aways !!!
Hi. Can you connect glasses with Mavic 3 pro in spectator mode? Perhaps in this case, a flight image will appear on the screen of the RC controller?
Queens in da house
Good video 👍.... I just tried to do this on my mini 3 pro and goofed, as it didn't work & I assumed they had prevented it from working any longer in recent firmware updates.
Looks like I just goofed the sequence up a bit, so I look Forward to getting it working with the goggles again.
I personally will never buy DJI products again, as they don't ever give us the features we request even on so called "PRO" models & are happy to roll out a new product and expect you to pay thousands more dollars just a year or so later to get what you asked for.
Screw that.... Next goggles I buy will be HD ZERO or something & use walksnail or whatever. I'm done with DJI, only took me 1x drone to be fed up with their BS. 😂 LOL
Too bad too, they do have some good stuff going for them. It's not worth the problems though.
Thanks for making this! Sucks that you have to waste battery time getting airborne first, and that the interface doesn't let you x out of stupid messages like that motion one.
Got a pair of integras that are coming in today for my first FPV build and can't wait to test them using my old M3P.
Wanted to go with a comparable qual/perf WS or HD0 but after crunching the numbers I'm paying $540 for the DJI VTX setup vs $658 for Walksnail or $748 for HD-Zero.
Given I fly cinematic DJI seems like the best choice.
guess i should have waited till the end lol time for the motion controller come on dji give us what we want
So I've known about this for a while... They can't get two video feeds to work reliably at all, and in testing, sometimes the goggles drop the feed when you're using the regular controllers, and it switches back to the controller feed. It seems the risk is minimal, but it was too much for DJI to officially greenlight and endorse. I can see how that might induce panic or cause crashes if it happens at the wrong moment. I know, I know, DJI is EVIL and wants to force you to buy another controller! However, I doubt there's anyone that can deny the level of hate they would get if they ok'd use with the RC Pro or RC-N2, and something went wrong.
The good news is all the rumors pointing to the Goggles 3 being more "camera drone centric" and compatible with the RC 2. The bad news is it will only work with O4 equipped drones like the Air 3, Mini 4, and upcoming Avata 2.
DJI can do it, they did it with O2 goggles and controller back in the days!
They can do it again with a more Superior 03 or even 04 💪
@@xavier_arthur No... There are hardware limitations AND if they were to try and run both feeds at once, it would degrade them both. There is only so much bandwidth. O2 had dual feed baked in AND it was at a much lower bitrate. They did it with O1 technically... I used to fly the Mavic 2 Pro with dual controllers.
Here's the main problem, if they release it and it's buggy, you'll be first in line to condemn them. It won't be, "well, at least they tried..." Hahaha! The very second someone is using the goggles and RC Pro and they crash... DJI will go from Hero to Zero in 3 seconds flat! Just like how everyone was crying for the Air 2s to work with the Smart Controller. DJI gave in and released the firmware, it wasn't very good and they got totally shit on. Seriously, honestly, do you really want to use goggles to fly a camera drone that bad? If you have an RC Pro, get any goggles with a HDMI input. Ta daa!!!
The Goggles 3 will fix some of this but we'll see just how many people will pony up $600 just to use goggles with an Air 3, Mini 4 Pro or Mavic 4 Pro. As you've shown, it's "easy" to fly O3 drones with the RC Pro or RC-N1 and Goggles 2/ Integra. It's funny, outside the few thousand extreme RUclips drone fans, millions of other camera drone owners, couldn't care less about goggles.
Ok I'll be okay with one feed at a time, if it's a hardware limitation!
I'm not sure how stable the motion controller is and how much range it has, but I'm pretty sure the RC Pro controller 🎮 will probably have longer range!
@xavier_arthur Can't argue with that since the Motion 2 and RC Pro use the same protocols. To be honest, I'm pretty sure the move will be the RC-N2 and the Goggles 3 when it comes to flying the Air 3, Mini 4 Pro, Avata 2 or Mavic 4/ Pro/ Zoom. Since they are O4 equipped drones.
Makes sense, probably a new air unit coming out too for home build fpv!
👍😃
I was racking my head teying to get the integra goggles to do this, yhen i found this video haha, i will try it when i get home
Doesnt work for me sadly
What controller, what goggles and what drone are you trying to fly?
@@xavier_arthurHallo. Does IT Work with mavic 3 Classic, RC N1 Controller and Googles integra? Thanks
sad story bro, I am waiting on Mini 4pro to arrive, I also fly FPV>, it is so sad that you cannot use the RC2 pro and googles at the same time, you could share feed and video with friends, wife kids etc, how soo money hore hungry DJI is
yeah,, but im still happy :D
Yeah, I’m not buying one. The whole point of DJI is to make drones easy, but clearly they’d rather retain control than happy customers.
Dronex
I wanted to buy the Mini 4 Pro and the Goggles 3 and to use the standard controller, but DJI WON‘T LET ME !!! That‘s DIABOLICALLY BAD CUSTOMER FRIENDLINESS !!! 🤮🤮🤮
I cant stand the motion controller it's awful