Follow up- Just got the FPR nib. Put it on Jinhao x750 ( BTW- they will not fit on x450 per Kevin at FPR.) Conversion took < 30 seconds. I cleaned nib and pen with some soapy water. Put in Monteverde Midnight black. It is lubricated so I thought that would help prevent any railroading issues. Results- FANTASTIC. The nib is smooth, writes great. Will not railroad unless I forget to stop pressing on the upstroke!! It is so addictive you want to flex it on both strokes! I am very very happy. For less than 30 bucks I have an excellent flex pen. Excellent customer service with Kevin at FPR. Disclosure- I have no connection to FPR or the man that put this video up. I am just a pen nerd/geek. This will instantly make your handwriting look better.
@@thewetpen According to this thread, the are actually marked with different sizes. www.reddit.com/r/fountainpens/comments/6nvzzi/nibs_for_jinhao/ I don't have different to confirm. Either way, trust Kevin at FPR. He's such a good guy.
FPR told me that their nib wouldn't fit on my TWSBI Eco, but it does. I suspect that they got feedback for some customers that it didn't work, and they don't want future customers to be disappointed. Super honest folks. I might have just gotten lucky with my particular pen/nib. I don't dare disassemble it now :)
I have a gold flex nib from FPR which I got with a Jaipur V2 I gave that one away to someone that doesn’t do calligraphy so I put a medium #6 in it. I just bought another Jaipur V2 and put the gold flex in that The nib was a bit scratchy and I polished a little. The results are great. It’s very soft with a lot of line width variation. It’s very wet with the Diamond ink I am using. But it has little to no railroading. I old and have shaky hands so I doubt whether I will be any good. But it’s fun trying. Just a note , before I first inked the nib and the feeder that came with it I noticed some gold dust on the feeder, so along the line somewhere someone had obviously done some work on it. It still a bit scratchy but I’m loathe to do anything myself since I really don’t know what I’m doing! All in all a fantastic gold flex nib from FPR Barry
Could you make a video like this on stub nibs? Out of all the channels I've come across, yours is the most straightforward and "no nonsense". You're not showing 15 different pens and trying to sell anything. Bravo. Subscribed.
Thanks! I'd be happy to... if I knew anything about stub nibs. Unfortunately, I just got my first about a week ago... a Lamy 1.5mm. It's fun to play around with, but I'm not really sure how much I like them yet. If they're like anything else having to do with pens, I'll quietly accumulate a dozen or two over the next few months for no apparent reason, though... so we'll see :-)
@@thewetpen I was about to ask the same question when I saw this Q&A. Stub nibs or calligraphy nibs will give you the thickness variation without all the bending and railroading (and wear?). Do you like the feel of the flexing, or the result?
@@georgegonzalez-rivas3787 The thing that I like about a flex nib is that I can write normally with it when I want to, and just add a little bit of flair with it when I want it. I do also like stub nibs (I have several of them now), and they certainly have their place. Maybe I will make a video about them, now that I have more experience... but I still prefer the feel and the distinctive look of a flex nib :-)
@@thewetpen Fine. It's just that after watching your video I walked away thinking you really valued the line variation. Practically every sentence was about that. Check out the Osmiroid stub nibs. They're my personal favorite although the pens are not highly thought of.
@@georgegonzalez-rivas3787 Awesome, thanks! I'm checking out Osmiroid nibs now. I have a set of Speedball dip calligraphy nibs and a JoWo stub nib for an Opus88 which has featured prominently in some of my recent videos, and I absolutely do appreciate the line variation.
Oh my god... I use G-nibs extensively and have been searching for a fountain pen that has the same quality nib. I never considered actually putting that nib into a fountain pen. Brilliant! I can’t wait to try this out myself!
@@zireotuivek6666 Me too... on the first one that I tried. And then later, I lost another one to negligence and corrosion, when I forgot about one of these pens for a few months with ink left in it. I couldn't get the corroded nib out, even with pliers. That's what it's such a good idea to use Jinhao pens... it's not the end of the world if you lose one and are out $5 or whatever they are these days.
I fought for a long while with the G and the Brause Rose nibs in my Jinhao pens and use them regularly.Hint: the Rose nibs will last much longer if you clean them well after each use. I love my FPR pen and maybe two months ago I finally realized that I could use my spare FPR nib in my Jinhaos. The FPR nibs are so awesome and have been a game changer in my quest for the Poor Person’s Wet Noodle. So glad you’re letting people know about this great hack.
I'm just starting my journey with fountain pens but my first was a Fountain Pen Revolution Himalaya V2 with the Ultra Flex nib. I'm loving both the pen and the nib so far. I appreciate your straight forward, no nonsense review in this video.
Glad you found the video useful :-) I've also purchased a couple of Himalayas... though I only kept one... and a pair of Jaipurs with ultra-flex nibs, and they're wonderful. Enjoy your pens!
Wow! I use a fountain pen daily for my work. Superexcellent video. Love the splashes of music as you display the nibs. Your voice fits the entire vibe of the fountain pen experience. Well done!!!
I bought an FPR Himalaya V2 w/Ultra Flex Nib quite a while ago now. I also bought a couple of extra nibs for some existing pens. The ebonite feed in the Himalaya definitely handled the ink load better than my pens without an ebonite feed. I love the nib but it does take a bit of trial and error to get it working reliably. Ink choice also makes a big difference. Personally, I've found Diamine to be a great ink for flex writing.
I ended up with a Himalaya (and a couple of Jaipurs) myself, and I'll say that the Jaipurs are very reliable, but I've had mixed results with the Himalayas... one is perfect, one never did write at all, and I had to send it back. And I agree... finding the best inks for flex writing takes a lot of fun experimentation! Diamine inks are often good, and so are Monteverde, Krishna, swift series Birmingham, PenBBS, and some Pilot. I should compile a list someday.
@@thewetpen - Thanks for that. There are a few inks there I hadn't even heard of, I will definitely check them out. I've also been wanting to try a Jaipur pen out for a while now and you're the second person in the last week that has testified to them being a good reliable writer. Looks like I might have to bite the bullet and order one. Is there any particular model you find preferable?
@@SnaykEyes77 I have two Jaipur v2s, one in the crackled blue finish and one in black ebonite. They're functionally equivalent, but I prefer the black one... the blue color is not as vibrant as I had hoped. I've also heard good things about the v1 Jaipurs, but I haven't tried one yet, so I can't tell you which is better. Good luck!
Oh my god this is the video I've been looking for! Thanks so much for the clear breakdown of your steps. I do have G nibs but I figured there must ne alternatives like your last option, especially since G nibs wear off or rust
I needed a comperative video on flex nibs. Your explanation is very informative and sufficient, also the quality of the camera is very good, thank you.
Glad this was still useful! I'm getting ready to make a Part 2 of this, since I've learned quite a bit about flex nibs over the past couple of years :-)
@@thewetpen you are too good to be true , you instantly replied even after 1 year. Cool. Very cool. I'm definitely going to share your videos and promote it with my penpals Very very huge respect. Thankyou so much
@@p.v.rangacharyulu241 One nice thing about having a small channel like this is that I don't get overwhelmed with new comments all the time :-) I'm not able to publish new videos here very often, so I expect that I'll always have a small channel here, but I do always hope that the people who manage to find my stuff find it useful.
There are two better options: one is pricey and the other is “more” cost effective. You can purchase a Falcon 912 from Nibs.com with the Spencerian grind. I have two but that is about almost $500.00 EACH. John Mottishaw does excellent work but it is expensive. Or you can get a Falcon 912 from Goulet and order the enhanced feed from Flexiblenib.com for the Falcon 912. The feed is about $50 depending on the desired feed type. I got the 2 channel. The difference other than price is the Spencerian grind is going to give you super thin lines with very nice line broad’ish type lines. The Falcon with the original nib and modified feed will give you what the pen was supposed to offer out of the box, however the original feed just absolutely cannot keep up with the nib. I have been EXTREMELY happy with all three 912’s that I have : 2 Spencerian grinds and 1 modified feed only. Best of luck!
Lol, it took me 2 reads, but I finally realized that when you wrote _"more" cost effective_, you meant slightly more cost effective than the already pricey option. (Rather than a cheaper alternative to those was displayed in the video.)
I don't think either of those is a better option. Frankly, the Ahab ebonite feed is cut precisely for a flex nib, and I think it does the job every bit as well. as the setup you have, if you put a better nib on it. Now, I don't think five hundred dollars is very expensive for a good fountain pen. I have only one gold nib pen that cost less than that, and most cost a lot more, but where flex is concerned, you just don't need to get that extravagant. A Spencerian grind is a good thing, but not something I prefer on a flex pen. It's a matter of personal taste, but I see no advantage between a fine, or sometimes an extra fine, grind and a Spencerian grind, and you can get the former for a heck of a lot less money. And, frankly, for that kind of money you may as well get a vintage pen with a true wet noodle flex nib, and a feed to match. I certainly like the vintage pens and flex nibs better than anything else on the market today. I haven't seen a modern flex nib to match them.
Very well done, and enjoyable to watch. I've had the same experience with my Omniflex Nib, and replaced it with a vintage Conklin that writes beautifully in spite of a bad feed. It's a never-ending quest.
@@thewetpen Thanks for the note. I own a Pilot Custom 912 W/ FA nib, and at.least for me, it's a really picky writer, railroading at the slightest pressure. Ink is the issue, find the right ink and stick with it in an FA nib. The deals are out there though, and you can save a lot waiting and looking in different markets (Japan). That's all part of the hobby, always looking for that perfect combination of pen and nib, that fits your writing style.
@@c.s.johnson7691 Ahh, I'm glad to hear it... this may save me a little money! Actually, I find that my interest in flex nibs is starting to wane just a hair, now that I have a few FPR nibs that are working nicely for me. For some reason, my Conklin is terrible with the FPR... the feed just doesn't seem to give it any ink. Regardless, I'm about to place an ink order from Cult Pens in the UK which should keep me satisfied for a few weeks at least. :-)
Thank you, this was just the info I needed. I have suspected for the past few days that going the FPR route was the ultimate solution, now it is confirmed. When my pens arrive, I will find the FPR Flex nib size that fits my beloved...and outfit her with one. Thank you.
Well, it is, in my opinion, better than any other flex nib on the market right now, and immensely cheaper than other options that aren't as good. But if you can afford it, look at vintage pens and vintage gold flex nibs. They define the term "wet noodle", and they have feeds to match.
Good video. Terrific How To. Thanks. re: steel nibs and scratchiness. I've abused several German nibs (Nemosines, TWSBI) often ending up with just the steel, no hard end material. If you work through the sand paper grits to 12000 or my go to a Monogram 25000 pad ( I have two, they're 'unavailable' on Amazon for about four years now) then you get a smooth, scratchiness free nib. Two situations. First the Nemosines, (I think they're out of business) these nibs always arrived scratchy. A quick tune up with 6000 - the 25000 took care of that. (Also most pen RUclips channels that mention sanding and polishing only go up to 12000). Second situation: my DIY (beginner) nibs where I've rubbed away the hard ball on the end. These will start to get noticeably scratchy after about 30-50 full pages of writing. A quick minute or two of figure-8s on the 25000 pad took care of that. And I've yet to see this video: "You think you want a flex nib, but you really want an italic/stub nib" Thesis: At some point someone who's fallen in love with fountain pens wants to write *differently.* Very soon they discover Spencer or Copperplate script and want to do that. So they buy a flex nib pen and.... discover they can only get line variation if they slow down their writing speed. It is possible, but it is very slow. Result- disappointment. If like me they have not very good handwriting so they stick to F and EF nibs thinking this is the only way they can write legibly. They will never even consider trying M or B. However, they will keep puzzling about 1.1 and 1.3 Stub nibs. If out of curiosity they buy one they'll discover- Some line variation at my usual writing speed! The down stroke seems BB wide but somehow my handwriting is more fun and a little bit better. I found stubs to be just wonderful. Next you'll want to try italic, but in the U.S. you can buy a machine gun but somehow italic nibs seem to only exist in the UK. I ground my own and first discovered efficient paper shredding blades can be rectangular. Then I rounded the corners and had a Eureka! moment, until I compared it to an unmolested stub.... and it was indistinguishable. (Next tip, try try try again) Also, perhaps a video on All the different types of italic nibs and where to get them in North America. (Smugglers?) I'm going to order some of those Mod-Jinhaos. (I never even considered a Jinhao - even while traveling all over China. Too scratchy. (I didn't know anything at the time.) One of my high school students bought one for a couple bucks on Amazon and showed it to me. Scratchy. But I brought in some of my sandpaper and we tuned it right up. re: 'wet inks' I learned about using wetting-agents like Kodak's Photo Flo. I'm an old photographer, but completely by chance I'd just come across my 20 year old bottle of the stuff in my garage and brought it into the house. Within a week I learned from a fountain pen video how to use it with ink. I like Noodler's Bay State Blue - but it can be a bit fussy. So I'll put a drop on the nib (TWSBI) before filling up the pen, or I'll put a few tiny drops right in the bottle of ink. Seems to work magic. (On the flip side, the least fussy, most reliable permanent ink I've ever found is Noodler's Polar Bear (Blue) - I travel with this and with a few Placker's dental floss on sticks I usually don't have to do any flushing for a couple of months.) I'm going to order some of those modified Jinhaos. Thanks again.
Great comment! Thank you. What did you grind your nibs with and how? I have no grinder. I thought about snipping the tips off some Jinhao fines, (I have stacks), and getting busy figure-eighting on micromesh, but I have a feeling that you're already laughing.
@@doctorfairlight2792 don't snip. They hand grind really fast. (I don't really understand why anyone would use a power wheel or Dremel). I do most of the rough work with a Trend 300/1000 diamond stone (synthetic), then I have small EZE LAP diamond sharpeners, and finally I have a set of Micro Mesh pads (each about 2" x 2") finishing with the 12000 grit. Since I made this comment I've misplaced my TWSBI Mini that I craved into an italic, so I ground a new slanted italic nib on the stub nib of my TWSBI 580. I find that I don't hold a fountain pen perpendicular to anything. So I found I use a 45° angle and also angled vertically on the paper. I'd suggest first grinding (sanding) something like a fountain pen nib if you want to try this. One problem is to make the nib thin - so it makes a thin horizontal line. I do this by grinding down vertically the front of the nib. When I have it about right, then I start in with the finer grits knocking down the edges so it doesn't slice into the paper. And of course any time your nib seems a bit scratchy, just run some Infinities on the 12000 pad. Hope this helps. However, the italic effect is minimal - maybe a professional grinder could do a better job. My understanding is a really crisp italic nib has fairly sharp corners so it'll cut into the paper. And if I could buy an italic nibbed pen with a large ink reservoir I'd buy it. They seem to sell these in the UK, so maybe the next time I'm in London I'll look for one. I bought all those sharpening tools, like the Trend, for wood shop tools so their cost might not be justified for DIY on some cheap nibs. The Micro Mesh pads I did buy for my nibs. One brand used to always arrive new very scratchy. Instead of sending them back, I just quickly smoothed them right out with the Micro Mesh. Hope this helps.
@@WillN2Go1Will, so sorry for responding this late. On 2 seperate attempts my ancient pc froze up mid reply, (I think it ran out of coal), and I lost the will. I much appreciate the effort you made with advice. I agree about not involving electricity to grind. Straight after I posted my question to you I remembered years ago slaughtering a Plumix BB nib on a bench grinder. What an ass. It would be safer to start off using a doorstep or a brick. I have loads of Jinhao nibs tp play with from replacing them with Jowos, and man that ain't cheap. I fail to see why mass made pressed steel nibs should cost so much. I'm getting tired of all the horse shite about fountain pens. After all, one can write with anything if it's dipped in ink, so I really like what you're doing. While whittling down, (there's no getting away from shaving stuff off is there?), Trend, Ezelap & similar bewildering choice of options I stumbled across Loft Pens on eBay. He's doing what you're doing professionally. I haven't used him yet, but he seems like he's tackling the nib grind rip off very affordably. Have a look at these and read the descriptions of what is ordered: www.ebay.co.uk/itm/192957187130?hash=item2ced25043a:g:Bg4AAOSwz~RdC59E www.ebay.co.uk/itm/192663402299?hash=item2cdba2373b:g:b3QAAOSwC0dbooXP He points out how to avoid excessive postage on his items, so he's on our side. I've included the following so you don't miss it. Customers NOT from the UK regarding combined postage for multiple items: Before your purchase, please request a total so you do not have to pay £3.00/£4.00 per item (base price depends on location). Each additional item will cost £0.50. Any other questions regarding International Postage, please send me a message I am happy to help! I'll give your recommendations a try Will, cheers! @WillN2Go1 So sorr
@@doctorfairlight2792 Thank you for the reply and thank you for the ebay link. £2 italic nibs? That's amazing. The pen in the photo even looks like one of my TWSBIs. I bought £21 worth shipping £14 message says UK to California end of the month(25 days) No problem. If they work out, I'll be over the moon,. I know true italics like flex nibs may require me to slow down more than I'm willing to. Let's find out! And they are nibs, so I can sand off the corner ( I ordered multiples so I can go too far without any tears.) It''ll also be like I'll be starting from the other direction. Instead of Stub to italic, it'll be italic to whatever I can still write with. Made my day.
Thank you for the video. It was excellent. I agree with Mrs Remi's comment. I did purchase a couple of nibs from Fountain Pen Revolution and I am excited for their arrival.
I like my FPR products and Kevin provides personal sales support. I think everyone into fountain pens should try out the various FPR pens and nibs. They are an excellent value.
With steel nibs, I think the FPR nib is as good as it gets. This said, while I hate the Ahab, it is, as far as I know, the only fountain pen that has a feed specifically designed for flex nibs. This is largely why it is accused of being a terrible leaker. Getting maximum flex without railroading requires a lot of ink, and a standard feed usually can't deliver enough ink to allow as much flex as a good flex nib can give. I haven't tried it, and don't even know if it will fit, but I suspect an Ahab feed combined with an FPR nib might be excellent. As it is, I use a number of pens made in India, and they seem to perform well with the FPR nib. I do prefer dip pens, though, and I never had trouble traveling with them. I took fountain pens, too, but I also took along something this latest generation of fountain pens users seems to have forgotten, which is a good writing box. There weren't used for several hundred years because they don't work well, and they're still made, and still work just as well, today. Of course, it also seems that blotting paper has been forgotten, too, which is largely why every review out there complains about how long it takes some ink to dry on good paper. You know, it's king of funny when I think about it, but I'm accustomed to spending a lot of money for fountain pens with ordinary round tipping. This is what I use the most, and I love them. My favorites are the Visconti Homo Sapiens Bronze age, the Scribo feel, a pair of Conway Stewart pens, a Namiki Maki-e, and a Namiki Chinkin. All fairly expensive pens. But while I do greatly prefer vintage pens and flex nibs, where modern pens and flex nibs are concerned, I've found that cheaper is actually better. I have friends who have spent a small fortune on building flex pens, and ended up using the FPR nib, a fairly cheap feed, either two or three channel, and a cheap pen because it worked better that their thousand dollar setup. And if you really want to get fancy, and don't mind a fair amount of pratice, try an oblique nib. As far as I'm concerned, there is no more beautiful calligraphy than that written with an oblique nib, but it does take some time to learn how to use opne well. And that said, I really do prefer dip nibs when doing any kind of calligraphy. I can use remarkable inks that fountain pens hate, and this alone is a big advantage. And, for me, dip pens are also more fun.
Hi James! As it turns out, most of FPRs pens also come with ebonite feeds, if you're buying them with flex nibs. I have a couple of their Jaipur models and a Himalaya. That said, I don't have much trouble with most of my plastic feeds... though some are better than others. I do have a small writing box (actually, it's for watercolors, which I also do now and then) and I carry that sometimes, and it's fine if I'm sitting down to write a letter or two... but if I'm wandering around the city and need to stop and take a few notes in my notebook, working with a dip pen just isn't practical. Most of the time that I get to write while I'm traveling is a few minutes stolen here and there... but I still like to make things look nice if I can. I also usually carry a piece of A5 blotting paper in my notebook (a couple of my notebooks have come with a piece, and I liked the idea so I stuck with it) which is very helpful when using a flex nib... you're right.
I started doing calligraphy with an old pilot metropolitan during summer vacation (I was looking for a new thing to do during quarantine XD). The pen worked great, but then I found out about different nibs, pens, and all the other cool things that I can modify and change. In a sense, it's kinda overwhelming, but I'm glad I stumbled upon this video. It's surprising how you don't have more subs! Great work, and thanks for the guide!
First of all comparing a dip pen with a fountain pen is difficult as they are different writing tools. Spencerian pens have very flexible nib and the Ink is very different than the fountain pen ink! The closest fountain pen which provide good shading is the special edition Montblanc fountain pen with its special nib!. Thank you for this very nice review! David
I installed a FPR flex nib in my TWSBI Eco and it's pretty much my favorite pen. The FPR nibs had two levels of flex when I bought mine and I found the extra flexy one was actually a bit too much flex for me. The less-flexy one was the sweet spot.
Ahh... that's interesting! I thought that the Eco used a #5 nib, and the FPR smaller ones were 5.5 or something like that. I haven't checked them out in a while, but I'm glad it worked for you at any rate. I have some of the "flex" nibs to go along with my "ultra-flex" nibs, and I like both for different things, so I guess it's just a matter of taste and usage. Enjoy!
@@thewetpen yes, at FPR they let me know it was unlikely to work, so I figured it would be up to chance. Plenty of other things didn't work for me, so I'm glad I lucked out in this instance.
@@clintondavis3363 Marc Kompaneyets did a nice video showing the modification needed to make the #5.5 fit the ECO. He also highly recommends putting the #5.5 on a 580, which requires no modification (I can confirm that this works well). Good luck! :)
@@thewetpen to follow up after some time -- the barrel on the Eco eventually cracked -- not enough for me to see, but enough for ink to repeatedly leak through. It was fun while it lasted!
I have recently purchased a couple of their pens with flex nibs, too. They have models with #5 nibs and #6, and the #5 tend to be less expensive, but are just as flexy and enjoyable to use. Going to have to make another video about them, I guess :-)
The FPR #5.5 nib has a smaller tip and can deliver a finer line while the #6 you have here has a fatter wetter line. I would recommend just getting the FPR Himalaya that they make for this nib. It has an ebonite feed that helps the ink flow better. It's my favorite pen.
Hey Hannah, That's exactly what I did! Well, not exactly.... I got a Jaipur v2, then a Himalaya, then another Jaipur, but all of them were the V2, so #6. Then I got a Darjeeling (I think), which a 5.5 standard flex, and for the life of me I couldn't get it to write at all. I've been meaning to do some work on the nib, but haven't gotten around to it yet. But I LOVE my Jaipurs, and they're completely reliable.
Glad it was helpful. I'm making a Part 2 of this video right now (maybe Part 2 and Part 3... I've ended up with more pens that I planned), just so you know :-)
FPR nibs are primarily sourced from India (Kanpur Writers to be precise). That's why they cost so much. In India we get a very similar ultra flex nib from Kanwrite at around ₹170 ($2).
Thank you very much for sharing, I have very bad experience with G nib with Jinhao, so difficult to install and sometimes hurt my finger, the nib won't last long and get rusty easily, will try FPR nibs, thank you.
I’m so glad I saw someone doing flex writing years ago. I spent years practicing. I’m pretty good at it now. I wish I had the money to buy a vintage waterman or Mont Blanc flex. I modify most of my nibs. I have a neoponset that i modified and it writes very well. The noodlers pens are so cheap It doesn’t really matter if you mess up. Lol
I've thought about learning how to do a nice flex script, but I think my list of things to learn is long enough already that I'll be satisfied with just watching other people do it now and then and being amazed :-) Still, I love my flex nibs...
I did in fact buy a Montblanc Calligraphy Flex 149, and also have the FPR ultraflex on a TWSBI Vac 700R. The Montblanc is a lovely pen and the nib very smooth, but it's not as fine as the FPR and the flex not as good.
I hate the Noodler's flex nib, but the feed on the Ahab is a guzzler, and works extremely well with a flex nib. I think the Ahab just needs a better nib to be one of the best on the market.
I’m just starting to find time to get into a little modern calligraphy. I’ve found a few online , but they’re way outside my pretty tight budget. Would you mind sharing how you learned flex writing-books, practice sheets printed off the internet, RUclips...? Thanks in advance!
Awesome video! Thank you! I use Zebra as a dip nib for watercolor calligraphy and as I am much used to it (it is really a charm to work with) I am looking forward now to trying your suggestions. Happy New Year!
When using #6 flex nibs, the feed is very important. The rate of flow in an ebonite feed is much faster than in a regular plastic feed. This difference isn't noted much in stiff writing nibs, but be clearly seen in flex nibs. The FPR nib, made by Kanwrite, performs best in ebonite feeds. The sheer level of flex without railroading is truly astounding. You might need to tweak and tinker like heat setting and increasing flow of ink, but its a sheer delight once you get there.
There are a few other options around the same price points to the super expensive. You can try the Noodler’s flex nib as well. There is also the Pilot Falcon or a Pilot Justus. Or you can use one with an FA nib. These are several hundred dollars. Then you can go super expensive and get a Montblanc 149 or a Pelikan M1000.
I have the Jinhao 159 pen with the Zebra nib just like on this video. However after watching this video I have decided to order the flex nib #6 from fountain pen revolution. This is the exactly the flex nib that I have been looking for that would not tear up the paper like what the Zebra nib would do.
@@thewetpen lol, we live in a china almost free shippings world. $20 shippings sounds nowhere near reasonable. Thats what quit me (and probably millions more) frome buying cool stuff from US back in circa 2010. Then China did the rest...
My pleasure :-) It's been a few years and I've learned a bit more about flex nibs, so it's probably time for me to make a new video, but these FPR nibs are still at the top of my list (for options under $100, anyway).
Just discovered your channel and love your approach and quiet voice and excellent choice of music. Very well done. I have had the same experience with FPR ultra flex on non FPR pens. It’s strange how on his pens they don’t have the same result that I get on other pens. Maybe it’s his ebonite feeds. Don’t bother buying the new improved JoWo omniflex nib as it doesn’t flex, but does write much better than the older versions. I’m subscribing and look forward to more reviews.
Thanks! I've had mixed results with FPR pens. I now have a pair of Jaipur v2 pens, and they work flawlessly. I have 2 Himalayas, also, and one was so terrible that I sent it back. The other works nicely with standard nibs but not with a ultra-flex... it's temperamental with flex.
Thanks for the help. I've tried a couple of things you tried, like purchasing the flex nib, the installation of Zebra G. Still, neither of those worked out for me. I just ordered a couple of pens and a FPR #5.5 two-toned flex from FPR. Thanks for the tips!
I got a Noodler flex nib last year on a Conrad. It was fussy, railroads, and I adjusted it and it got better and was a lot of fun, even the learning and adjustment. But in that research I found FPR, and this year during the holidays I got FPR Jaipur V2 on sale. It wrote correctly out of the box, preformed better with no railroading if I took my time. I suggest this nib to folks, the Jaipur has a piston so has a good ink capacity, a must with wet writers. It also has a ebonite feed, something that seems to help keep up with the ink needs. Naturally if this isn't enough of a feed, you can make adjustments, I would suggest very little at a time.
I've used fountain pens for decades on and off and a couple years ago got more involved and recently have started doing some work on ones I own. I've had some Zebra G's in straight and oblique holders for a couple years now, too, and they are a lot of fun, but only at home. I want a flex pen to carry around that won't break the bank. So the side by side comparison of the FPR with Zebra G is helpful to me, thank you! I've also thought that the FPE Ultra Flex nib could be ground finer if one was willing to. I may get a few and try this. I've also wondered if their ebonite feed would help with the ink starvation issues/railroading, I suspect it would. The Sheaffer Snorkel uses a tiny piece of ebonite with a slit in it in the snorkel to deliver ink to the feed from the sac and I was astonished at how effective it is at that task, and how quickly it flowed water or ink along its length. This is partly the very fine capillary spaces, but also the easy wetting nature of the material. Again, thanks for this video!
I bought the FPR ebonite feed with one of my nibs, thinking the same thing. Unfortunately, it isn't the same size as the Jinhao feed (which has a flat side, as you know), and it would take some modification to make it fit in any of my pens, so for now it's just sitting around in an envelope. The Shaeffer Snorkel sounds interesting... I'll have to check it out!
There are a couple of sellers on AliExpress who are selling the Zebra G nibs installed on Jinhao x450 & x750 pens. I ordered one, so I'll come back once I get it. It's literally on a slow boat from China so it will be awhile. It was actually cheaper to buy it that way than buying the pen and nib seperately.
When it comes to flex, I look for the ratio of unflexed to maximum flex. I think it should at least be a 10:1. Zebra G likely uses hardened steel (which acts like a spring) to get needlepoint to italic but it is not water proof. Other nibs are water proof and use basic stainless steel which isn't very flexible and attains a mere 4:1 flex.
Osprey Pens makes some nice flex nibs. On their site, you have to purchase as part of a set up..(section & converter) for their brand of pens. I threw their pen away but put the medium flex nib in my Giant Sequoia. Great daily writer. They are made in India, same as FPR nibs. I tossed out the Madison pen because of converter leaking and super strong resin odor. They make EEF through Broad nib flex in #6 and also #5.5
@@thewetpen I would really love that. Also, do you know of any good pen shops in Seattle or Portland? I don't mind shopping online, but I'd love to try some pens too if there are still stores that stock good flex nibs.
There aren't really any good, big pen stores that I'm aware of in the northwest here. The closest thing is the Kinokuniya Bookstore in Seattle, adjoining the Uwajimaya. They have a nice selection of inks and some nice pens, and they might have the Pilot Custom Heritage 912 with the FA (Falcon) nib, which is a good flex, but any Falcon nib might be interesting to try out. Good luck!
Came across this video and thought I'd give fountain pen revolution a go, previously had the Noodler's Ahab and was disappointed with how much pressure was required to flex as it became tiring after a few sentences. After ordering the 5.5 extra fine ultra flex nib for my twisbi eco and a 6 for my jinhao I was blown away, it is as close to a proper vintage flex that you can get in stainless steel. Definitely recommend checking them out!
FPR also sell those nibs in gold as well. I've been dying to try them out. At this stage I've been very happy with their steel versions so haven't seen the need. The price is pretty steep too so didn't want to fork out the cash until I saw a decent review comparing the two....
I bought one of their nibs along with an ebonite feed, but was too much of a novice to be able to do anything with it, so it's just sitting in a box in the back of a desk drawer :-) It didn't fit the JinHao feeds without modification... but I wonder if it would fit into my Duragraph? But yes... I'd probably be better off getting one of their pens or screw-in nib units.
Thank you! =) I will think more if I really want to have a flex nib and if I do I will get that Aliexpress Jinhao. I didn't even know that was an option and it seems much better than the Noodler's Ahab which until now was the cheapest flex nib I knew about. But that Jinhao is a proper flex nib while the Ahab seems to not flex that much
Very true... the Jinhao pens are a good, cheap option to play with, although the nibs don't last forever, and they're often glued in and can't really be changed, so keep that in mind. Another good option is the Osprey Madison with a Zebra G nib... it's about $30, I think, but you can switch out the nibs whenever you want.
I love the idea of a flex nib and bought an Ahab to try it out. I was very disappointed. My experience was similar to yours with the Conklin omniflex nib. Also, that Ahab leaked ink all over me every time I used it. These $20 Nibs you found look promising. Thanks!
I eventually also bought an Ahab, just to try it out, and was similarly disappointed. I like it as a pen (mine was very reliable, just not flexy), but not as a flex pen. I understand that many people don't have the same luck that I did and need to tinker with the feed a bit before it's reliable.
Amazing! you just made my day. Ordering the FPR ultra flex nib now! I haven't checked yet, but did you list the inks u used for demonstration with the FPR? If no what are they?
I did list them at the end of the video, I believe. (yes... at 10:08) This was my first RUclips video, so I'm (a little) better now about mentioning what the ink is when I'm using it :-)
I don't know how I just found this video. I'd be interested to hear if you have any updates to this list. I am a flex nut so I've tried tons of different options. My favorite in my lineup is my Stylosuite Xwing Harpoon customized by Les. It's the perfect combination of flex, extra fine lines, and springiness. I think second on my list because it's so accessible price-wise is the FPR ultra flex nib. I have one on a twsbi vac mini and it's rad. I also have some some expensive Franken-pens like a pilot FA nib in an Opus 88 demonstrator with a 3 slit ebonite feed. While I like it a lot, the cost is prohibitive and the results aren't really better than the FPR. Thanks for sharing! I always love your videos!
I've also added a bunch of flex pens to my collection over the past 4 years since I made this video, although I'm not sure that any of them are really any better than an FPR... I still haven't tried the FPR gold ultra-flex. I do have a Magna Carta Mag 600, and it has a nice flex nib, but it's expensive and doesn't seem any better than my best FPRs. I have a Pilot Custom Heritage with the FA nib to which I've added an ebonite feed, and it's also very nice, but the level of line variation is somewhat modest. I do also have a Blue Dew, but the nibs on them are untipped, so they're like writing with a G-nib to a large extent. I have an Osprey Madison, also, and it's great for use with G-nibs, but I rarely use it now. Chrisrap52 gave me a vintage Waterman with a flexy nib... there's a video about it on my channel somewhere 🙂I'm sure there are others that I'm forgetting. I really need to make a follow-up video to this one.
Please do post a video on how to switch the nibs on the X 750. Also on switching nibs in general because I always seem to have problems. The nibs never come out as easily as you demonstrate, for example. That whole $4 pen and $16 nib thing is attractive to me since I'm partial to the heavier pens like the metal Jinhaos. Thank you in advance. I also agree with EL Che's comments.
Thanks! It doesn't seem to get any views, but I actually DID do a short video about switching nibs on the x750. Not sure that it will really be of any help (some nibs are just harder than others), but it's worth a shot: ruclips.net/video/4Al9lAZFxQw/видео.html
Fpr feeds can't keep up. I saved up and bought a Pilot Custom heritage 912 with the gold flex Falcon nib. The big Con 70 converter keeps up perfectly. I also have a Conway Stewart with a gold fine stub flex nib. This is beautiful to see in green black cracked ice celluloid and performs perfectly. £45 off ebay UK. Fpr and any pens from the USA get hammered with heavy import charges. The Pilot came from Hong Kong and had no added import duty
Hi Neil. I've had mixed results with plastic feeds from FPR or Jinhao or anyone else. I have one Jinhao feed that keeps up endlessly, but most of them require me to slow down every now and then. But I bought an FPR Jaipur a few months ago with an ultra-flex and ebonite feed, and it's great; it never railroads, even when I'm writing fast for long periods. In the same order I bought an FPR Himalaya, also with an ebonite feed, with a standard flex nib instead of an ultra flex, and I never did manage to get it to work... it was either too dry or would dump ink all over the page (they accepted it as a return). So, it seems as though there's some luck involved... but 3 of 4 of my pens from them have been good and reliable. I really want a Pilot with a Falcon nib, too. It's on my list :-)
Neil Piper, is that correct about pens from China coming to UK customers without crappy customs import and handling charges? What about from India? Would a package from there swerve our over-zealous customs people? The nee restrictions on us buying from USA are frustrating.
@@agnessmythe3521 I have only had customs duty charges from the USA to me here in the UK. I buy from China and Hong Kong, mostly with free postage. It's faster now than it was 6 years ago. 2 weeks on average.
I too have considered reviewing, so I am happy that your channel was suggested. I will echo one of the previous comments. I liked the music, your no-nonsense yet thorough review of a topic I have had almost no experience with. I hold almost the same position regarding calligraphy: I am neither interested or talented enough (at this age particularly) to try true calligraphy; yet, like you, I love to add a little flair to my own personal writing occasionally (usually on cards sent to a friend). Keep up the good work. As most of us would say, I always think it is best to be yourself. So, I like that you do not try to copy others. Best wishes!
Thanks, Keith! I just bought a pen from FPR, so maybe I'll review that in the future, too. With my normal work schedule somewhat disrupted at the moment, I'm looking forward to getting a couple of big projects out of the way so that I can get back to work on my videos here :-)
I usually buy 52gsm because I didn't realize at first that 68 was available in loose leaf, but I prefer 68. The green ink is called "Lemur Lime" and is made by Blackstone Inks exclusively for Lemur Ink. I think that Blackstone may have gone under, do I'm not sure if it's still available. I love the color, but it does crystalize all over the nib if you let the pen sit unused for a couple of weeks.
Hi, thank you for this amazing video, beautifully explained. I’m doing oblique dip pen with nikkoG, and I would love to try on one of those jinhao fountain pen. If you have done a good video on this matter I would be strongly interested ;-) When I was a teenager, I used to transform my old Waterman fountain pen in stub nib! (no internet :-D) It was savage, but worked for me at that time. Tx
Hey Steph, I can't promise a good video... but I did make a video about the Jinhao/G-nib conversion... you can find it here: ruclips.net/video/4Al9lAZFxQw/видео.html When I was a teenager, I inked my mom's Waterman fountain pen up with some black carbon Sumi-E ink. Also brutal. It still smells like charcoal, though it finally writes again.
My experiences with FPR pens hasn't been a happy one. I've bought two and when they were working, they were fire hoses. The ultra flex nib with the gold colouring looks very attractive.
My experience with their pens has been a little mixed but mostly positive. I first bought a Himalaya with an ebonite feed and medium nib, which I removed and installed an ultra-flex nib, and it was unreliable, so I put a medium nib back in it and it's been great. Then I got a Jaipur with a ultra-flex nib pre-installed, and it was absolutely reliable from the start, and I absolutely love it. But in the same order, I got another Himalaya but with a standard flex nib, and it either didn't write at all or drained the entire converter onto my paper in one fell swoop. I replaced that pen with another Jaipur, and it has been good, but it wasn't as reliable as my first Jaipur until I re-set the nib and feed about a dozen times. Now it's pretty perfect. So, yeah... they're not perfect, but if you're willing to tinker a bit, they can be great.
This one can be a bit expensive, but Flexible Nib Factory sells adaptors with ebonite feeds that fit the Zebra G onto pens that accept jowo6 nib units. I have mine on a psp ranga bamboo model and it's an absolute delight to work with, though I would prefer a thinner pen
Yeah, those look really cool! Osprey also makes some pens that have a section/feed that is specifically for Zebra-G sized nibs... also somewhere around $50, if I recall. Both really cool options, if you don't mind spending the money. For me, I think that the Jinhao method is easy enough that I don't mind doing it for when I want to use a dip nib... but I really prefer a standard writing nib that can also flex, just for writing comfort.
@@thewetpen I've actually had the Osprey too! Imo there were too many places for leaks on some models since the section forces you to use pens as eyedroppers. I have a desiderata also, but only because someone was selling it for about 2/3rds of the regular price. Of the three I prefer the FNF option best. Especially since it opens up for upgraded pen bodies should you decide to do so. Happy writing!
i sprung my omniflex within weeks of having it, so i've been looking for better options. i do like the noodlers ahab quite a bit because it's sturdy, and i've never gotten the Zebra G nibs to work in a fountain pen. with definitely check out the FPR nibs!
I have a couple of Noodler's pens, and they're good pens, but the nibs are not very flexible. FPR sells "Flex" and "Ultra-Flex" nibs; the one that I showed here was "Ultra". The nibs that came on my Noodler's pens were the standard "Flex". The exception is the Noodler's Triple Tail, though they tend to be a bit scratchy. Good luck!
Their #6 flex is a JoWo like this Conklin, although theirs is the new model so they look a little different. Performance is about the same though... not really very flexy 🙂
@@thewetpen Makes sense. Monteverde/Conklin use Jowo, and Goulet spare nibs are... Jowo! Then we already know from your experience it's an underwhelming flex.
Hi John, No, I haven't tried anything like that yet. When it comes to nib and feed customization, I'm pretty much a novice, so I'll probably be taking it slowly over the next few years before I tackle something like that and feel comfortable telling people about my results :-)
Another important element of the flex pen is the Ink, the ink of a dip Spencerian pen is thicker and would block a fountain pen. In addition the Spencerian pen or calligraphy pen is angled as well so it it not possible to replicate this type of writing with a fountain pen by just changing the nib. Nice video though! .
Nice informative video ,just bought an abalone endura with an omniflex nib as I wanted the pen and didn't have a pen with a flex nib,I hope I won't be too disappointed as I'm seeing quite a few people who don't rate the factory supplied nib..😬...oh well if it doesn't cut it I guess I will have to try and find a replacement nib.Thanks again and greetings from England.
Hey Jeff! Those abalone Enduras are pretty sharp looking pens... I've had my eye on one, too. I'm afraid you probably will be disappointed in the omniflex nib, but luckily, there are some really good replacement nib options from FPR or Kanwrite in India... not sure which will have more reasonable shipping to the UK.
@@jefftaylor4707 Assuming that you're looking for a good flex nib, then the FPR nib mentioned in this video would be a good choice ( fprevolutionusa.com/collections/6-nibs-and-nib-units/products/fpr-6-two-tone-ultra-flex-nib ) and the Kanwrite ones don't look like they're available separately right now... kanpurwriters.com/product-category/nc/
I know this is old but bluedew is a good option. It’s pretty much a stainless steel leonhardt principal dip nib. there’s also the pilot fa nib and falcon that’s but those are more expensive options
Thanks! I got a Bluedew about 6 months after I made this video, and it's got great flex, although it's not tipped... so I get the nice fine lines with it, but it's scratchy compared to the FPR. The Pilot is now one of my few pens with a gold nib... I'm still not sure why I decided to spend that much money on it, but I love it!
Why don't you build your own super flex nib ? With a dremel grinding tool , and a round grinder , you can take whatever nib you want . Adjust and grind the sides away to make the breth of the nib thinner , like your last choice here , so that the metal flexes better because of less support and thus resistance on the sides . Also use ebonite rubber feeds that you can heat set , to accomodate every "section-adjusted flex nib" combination that you have chosen or created . If it works you'll have much more control over your pens . To the more extreme you can try to make two or three slits in a nib to adjust the flex , and create a music nib yourself for no money at all . Just try to obtain a thin saw . Isn't that fun ?
That does sound like fun, but it also sounds like more work than a beginner is likely to have success with. Maybe I'll start playing around with that sort of thing. In the meantime, I have several new flex nib pens that are working out perfectly for me.
Hi Matthew. You earned my trust regarding fountain pens. I got a kaweco sport and a ordered a kaigelu based on your video, yet to arrive. I am looking for a full sized pen for my desk, possibly to be used with bottled ink and with piston or vac or eyedropper. I would like to stay below 50€ in eu and the only option I found is the eco, which I don't quit like. Would you suggest me something please? Especially not the usual big names
There are lots of good pens out there for under 50 Euros, but it's hard to recommend one in particular. My recommendation is to find something that will be personally meaningful to you somehow. For example, I really love my ASA Nauka, which reminds me of my Indian girlfriend and our time spent in India, but the same pen might be very boring to someone who has no personal connection. If you don't find something like that, then take a look at: the full range of Nahvalur pens (Narwhal); I have an ebonite piston filler one and it's probably the pen that I use the most in my day to day life, though it's a bit more expensive. All of their nibs are great, though, and they're all piston fillers, I think. Also, take a look at PenBBS pens. If you want a hand-made pen, then Ranga's Abhimanyu currently still has a group buy and they're $59 USD, so right in your range. Good luck!
It would be great, if it actually flexed reliably. Luckily, there are lots of better options, now. Check out the Osprey Madison :-) www.ospreypens.com?aff=41
Yes... there are actually a couple of different ones. The one that I have and like best is in a Pilot Custom Heritage 912 FA, and it's a gold flex nib with a shape that's similar to the FPR nibs in the video. The more common Falcon nib with the unusual shape doesn't flex quite as much, but it's nice too. The 912 that I got was something like $160, so not too bad for a gold nib Pilot.
I bought one after I made this video, and I really like the pen, but mine is not really very flexy... it takes too much pressure to make it flex, and it doesn't flex very much even then. It's similar to the Conklin in that regard. But as I said in the video, I'm no expert, and was even less so when I made this video a couple of years ago, so there are plenty of flex nibs that I haven't tried yet 🙂
Follow up- Just got the FPR nib. Put it on Jinhao x750 ( BTW- they will not fit on x450 per Kevin at FPR.) Conversion took < 30 seconds. I cleaned nib and pen with some soapy water. Put in Monteverde Midnight black. It is lubricated so I thought that would help prevent any railroading issues. Results- FANTASTIC. The nib is smooth, writes great. Will not railroad unless I forget to stop pressing on the upstroke!! It is so addictive you want to flex it on both strokes! I am very very happy. For less than 30 bucks I have an excellent flex pen. Excellent customer service with Kevin at FPR. Disclosure- I have no connection to FPR or the man that put this video up. I am just a pen nerd/geek. This will instantly make your handwriting look better.
Nice! Glad to hear that it worked out. I wonder why they wouldn't fit on an x450? The x450 takes the same Jinhao #6 nibs as the x750. Odd.
That is what I thought but Kevin said it was a no go. The Jinhao pens are so cheap I didn’t mind getting one.
@@thewetpen According to this thread, the are actually marked with different sizes. www.reddit.com/r/fountainpens/comments/6nvzzi/nibs_for_jinhao/
I don't have different to confirm.
Either way, trust Kevin at FPR. He's such a good guy.
FPR told me that their nib wouldn't fit on my TWSBI Eco, but it does. I suspect that they got feedback for some customers that it didn't work, and they don't want future customers to be disappointed. Super honest folks. I might have just gotten lucky with my particular pen/nib. I don't dare disassemble it now :)
I have a gold flex nib from FPR which I got with a Jaipur V2 I gave that one away to someone that doesn’t do calligraphy so I put a medium #6 in it. I just bought another Jaipur V2 and put the gold flex in that
The nib was a bit scratchy and I polished a little. The results are great. It’s very soft with a lot of line width variation. It’s very wet with the Diamond ink I am using. But it has little to no railroading. I old and have shaky hands so I doubt whether I will be any good. But it’s fun trying.
Just a note , before I first inked the nib and the feeder that came with it I noticed some gold dust on the feeder, so along the line somewhere someone had obviously done some work on it. It still a bit scratchy but I’m loathe to do anything myself since I really don’t know what I’m doing!
All in all a fantastic gold flex nib from FPR
Barry
Could you make a video like this on stub nibs? Out of all the channels I've come across, yours is the most straightforward and "no nonsense". You're not showing 15 different pens and trying to sell anything. Bravo. Subscribed.
Thanks! I'd be happy to... if I knew anything about stub nibs. Unfortunately, I just got my first about a week ago... a Lamy 1.5mm. It's fun to play around with, but I'm not really sure how much I like them yet. If they're like anything else having to do with pens, I'll quietly accumulate a dozen or two over the next few months for no apparent reason, though... so we'll see :-)
@@thewetpen I was about to ask the same question when I saw this Q&A. Stub nibs or calligraphy nibs will give you the thickness variation without all the bending and railroading (and wear?). Do you like the feel of the flexing, or the result?
@@georgegonzalez-rivas3787 The thing that I like about a flex nib is that I can write normally with it when I want to, and just add a little bit of flair with it when I want it. I do also like stub nibs (I have several of them now), and they certainly have their place. Maybe I will make a video about them, now that I have more experience... but I still prefer the feel and the distinctive look of a flex nib :-)
@@thewetpen Fine. It's just that after watching your video I walked away thinking you really valued the line variation. Practically every sentence was about that.
Check out the Osmiroid stub nibs. They're my personal favorite although the pens are not highly thought of.
@@georgegonzalez-rivas3787 Awesome, thanks! I'm checking out Osmiroid nibs now. I have a set of Speedball dip calligraphy nibs and a JoWo stub nib for an Opus88 which has featured prominently in some of my recent videos, and I absolutely do appreciate the line variation.
Oh my god... I use G-nibs extensively and have been searching for a fountain pen that has the same quality nib. I never considered actually putting that nib into a fountain pen. Brilliant! I can’t wait to try this out myself!
Nice! Its pretty easy, but I also made a video about how to do it. It's my only other video, in fact :-)
i messed up the feed trying to change for the zebra g nib on a jinhao fountain pen...
@@zireotuivek6666 Me too... on the first one that I tried. And then later, I lost another one to negligence and corrosion, when I forgot about one of these pens for a few months with ink left in it. I couldn't get the corroded nib out, even with pliers. That's what it's such a good idea to use Jinhao pens... it's not the end of the world if you lose one and are out $5 or whatever they are these days.
The Wet Pen which ink did u use at 6.50?
@@adityabnrj The blue sheening ink is Krishna Moonview 2, the orange one after it is Noodlers Apache Sunset.
I fought for a long while with the G and the Brause Rose nibs in my Jinhao pens and use them regularly.Hint: the Rose nibs will last much longer if you clean them well after each use. I love my FPR pen and maybe two months ago I finally realized that I could use my spare FPR nib in my Jinhaos. The FPR nibs are so awesome and have been a game changer in my quest for the Poor Person’s Wet Noodle. So glad you’re letting people know about this great hack.
Ponta FPR SÃO de que marcas?
I'm just starting my journey with fountain pens but my first was a Fountain Pen Revolution Himalaya V2 with the Ultra Flex nib. I'm loving both the pen and the nib so far. I appreciate your straight forward, no nonsense review in this video.
Glad you found the video useful :-) I've also purchased a couple of Himalayas... though I only kept one... and a pair of Jaipurs with ultra-flex nibs, and they're wonderful. Enjoy your pens!
Jaipur? I'll have to look into that brand. I'm always keen to try out a new flex pen.
@@SnaykEyes77 I have some videos on FPR pens if you want to check out. ruclips.net/video/VxefFutpNx0/видео.html
Im loving my FPR himilaya V2 with ultra flex nib - its wet, it flexes, it looks good so its one of my favourite pens
Wow! I use a fountain pen daily for my work. Superexcellent video. Love the splashes of music as you display the nibs. Your voice fits the entire vibe of the fountain pen experience. Well done!!!
I bought an FPR Himalaya V2 w/Ultra Flex Nib quite a while ago now. I also bought a couple of extra nibs for some existing pens. The ebonite feed in the Himalaya definitely handled the ink load better than my pens without an ebonite feed. I love the nib but it does take a bit of trial and error to get it working reliably. Ink choice also makes a big difference. Personally, I've found Diamine to be a great ink for flex writing.
I ended up with a Himalaya (and a couple of Jaipurs) myself, and I'll say that the Jaipurs are very reliable, but I've had mixed results with the Himalayas... one is perfect, one never did write at all, and I had to send it back. And I agree... finding the best inks for flex writing takes a lot of fun experimentation! Diamine inks are often good, and so are Monteverde, Krishna, swift series Birmingham, PenBBS, and some Pilot. I should compile a list someday.
@@thewetpen - Thanks for that. There are a few inks there I hadn't even heard of, I will definitely check them out. I've also been wanting to try a Jaipur pen out for a while now and you're the second person in the last week that has testified to them being a good reliable writer. Looks like I might have to bite the bullet and order one. Is there any particular model you find preferable?
@@SnaykEyes77 I have two Jaipur v2s, one in the crackled blue finish and one in black ebonite. They're functionally equivalent, but I prefer the black one... the blue color is not as vibrant as I had hoped. I've also heard good things about the v1 Jaipurs, but I haven't tried one yet, so I can't tell you which is better. Good luck!
@@thewetpen - Thankyou
Oh my god this is the video I've been looking for! Thanks so much for the clear breakdown of your steps. I do have G nibs but I figured there must ne alternatives like your last option, especially since G nibs wear off or rust
Nice match for the music and the writing/doodling samples. Particularly love your summary at the end. Can't wait to see more videos.
Thanks! I can't wait until I get some free time in my life to be able to make some more videos :-)
I needed a comperative video on flex nibs. Your explanation is very informative and sufficient, also the quality of the camera is very good, thank you.
Glad this was still useful! I'm getting ready to make a Part 2 of this, since I've learned quite a bit about flex nibs over the past couple of years :-)
This video is a must have for everybody, who loves pens, thank you. I subscribed instantly.
Most useful video in YEARS! THANK YOU!
Why didn't I find this channel before spending tons of money on fountain pens.
😂
Excellent info.
Simple , smooth and superb
Glad it was useful... sorry if it was too late :-) There are lots of good options out there, though.
@@thewetpen you are too good to be true , you instantly replied even after 1 year.
Cool.
Very cool.
I'm definitely going to share your videos and promote it with my penpals
Very very huge respect.
Thankyou so much
@@p.v.rangacharyulu241 One nice thing about having a small channel like this is that I don't get overwhelmed with new comments all the time :-) I'm not able to publish new videos here very often, so I expect that I'll always have a small channel here, but I do always hope that the people who manage to find my stuff find it useful.
There are two better options: one is pricey and the other is “more” cost effective. You can purchase a Falcon 912 from Nibs.com with the Spencerian grind. I have two but that is about almost $500.00 EACH. John Mottishaw does excellent work but it is expensive. Or you can get a Falcon 912 from Goulet and order the enhanced feed from Flexiblenib.com for the Falcon 912. The feed is about $50 depending on the desired feed type. I got the 2 channel. The difference other than price is the Spencerian grind is going to give you super thin lines with very nice line broad’ish type lines. The Falcon with the original nib and modified feed will give you what the pen was supposed to offer out of the box, however the original feed just absolutely cannot keep up with the nib. I have been EXTREMELY happy with all three 912’s that I have : 2 Spencerian grinds and 1 modified feed only. Best of luck!
Lol, it took me 2 reads, but I finally realized that when you wrote _"more" cost effective_, you meant slightly more cost effective than the already pricey option. (Rather than a cheaper alternative to those was displayed in the video.)
I don't think either of those is a better option. Frankly, the Ahab ebonite feed is cut precisely for a flex nib, and I think it does the job every bit as well. as the setup you have, if you put a better nib on it.
Now, I don't think five hundred dollars is very expensive for a good fountain pen. I have only one gold nib pen that cost less than that, and most cost a lot more, but where flex is concerned, you just don't need to get that extravagant. A Spencerian grind is a good thing, but not something I prefer on a flex pen. It's a matter of personal taste, but I see no advantage between a fine, or sometimes an extra fine, grind and a Spencerian grind, and you can get the former for a heck of a lot less money.
And, frankly, for that kind of money you may as well get a vintage pen with a true wet noodle flex nib, and a feed to match. I certainly like the vintage pens and flex nibs better than anything else on the market today. I haven't seen a modern flex nib to match them.
Thanks to you, I just made my first custom pen, complete with custom ink. Now, I'm never gonna stop.
Very well done, and enjoyable to watch. I've had the same experience with my Omniflex Nib, and replaced it with a vintage Conklin that writes beautifully in spite of a bad feed. It's a never-ending quest.
I've started looking at some Pilots with the FA nibs. This is going to be an expensive hobby after all.
@@thewetpen Thanks for the note. I own a Pilot Custom 912 W/ FA nib, and at.least for me, it's a really picky writer, railroading at the slightest pressure. Ink is the issue, find the right ink and stick with it in an FA nib. The deals are out there though, and you can save a lot waiting and looking in different markets (Japan). That's all part of the hobby, always looking for that perfect combination of pen and nib, that fits your writing style.
@@c.s.johnson7691 Ahh, I'm glad to hear it... this may save me a little money! Actually, I find that my interest in flex nibs is starting to wane just a hair, now that I have a few FPR nibs that are working nicely for me. For some reason, my Conklin is terrible with the FPR... the feed just doesn't seem to give it any ink. Regardless, I'm about to place an ink order from Cult Pens in the UK which should keep me satisfied for a few weeks at least. :-)
C. S. J
Thanks for being so clear and relaxed. Pretty good video.
Thank you, this was just the info I needed.
I have suspected for the past few days that going the FPR route was the ultimate solution, now it is confirmed.
When my pens arrive, I will find the FPR Flex nib size that fits my beloved...and outfit her with one.
Thank you.
Hi! where you got your FPR nimbs?
Well, it is, in my opinion, better than any other flex nib on the market right now, and immensely cheaper than other options that aren't as good.
But if you can afford it, look at vintage pens and vintage gold flex nibs. They define the term "wet noodle", and they have feeds to match.
Good video. Terrific How To. Thanks. re: steel nibs and scratchiness. I've abused several German nibs (Nemosines, TWSBI) often ending up with just the steel, no hard end material. If you work through the sand paper grits to 12000 or my go to a Monogram 25000 pad ( I have two, they're 'unavailable' on Amazon for about four years now) then you get a smooth, scratchiness free nib.
Two situations. First the Nemosines, (I think they're out of business) these nibs always arrived scratchy. A quick tune up with 6000 - the 25000 took care of that. (Also most pen RUclips channels that mention sanding and polishing only go up to 12000). Second situation: my DIY (beginner) nibs where I've rubbed away the hard ball on the end. These will start to get noticeably scratchy after about 30-50 full pages of writing. A quick minute or two of figure-8s on the 25000 pad took care of that.
And I've yet to see this video: "You think you want a flex nib, but you really want an italic/stub nib" Thesis: At some point someone who's fallen in love with fountain pens wants to write *differently.* Very soon they discover Spencer or Copperplate script and want to do that. So they buy a flex nib pen and.... discover they can only get line variation if they slow down their writing speed. It is possible, but it is very slow. Result- disappointment.
If like me they have not very good handwriting so they stick to F and EF nibs thinking this is the only way they can write legibly. They will never even consider trying M or B. However, they will keep puzzling about 1.1 and 1.3 Stub nibs. If out of curiosity they buy one they'll discover- Some line variation at my usual writing speed! The down stroke seems BB wide but somehow my handwriting is more fun and a little bit better. I found stubs to be just wonderful.
Next you'll want to try italic, but in the U.S. you can buy a machine gun but somehow italic nibs seem to only exist in the UK. I ground my own and first discovered efficient paper shredding blades can be rectangular. Then I rounded the corners and had a Eureka! moment, until I compared it to an unmolested stub.... and it was indistinguishable. (Next tip, try try try again)
Also, perhaps a video on All the different types of italic nibs and where to get them in North America. (Smugglers?)
I'm going to order some of those Mod-Jinhaos. (I never even considered a Jinhao - even while traveling all over China. Too scratchy. (I didn't know anything at the time.) One of my high school students bought one for a couple bucks on Amazon and showed it to me. Scratchy. But I brought in some of my sandpaper and we tuned it right up.
re: 'wet inks' I learned about using wetting-agents like Kodak's Photo Flo. I'm an old photographer, but completely by chance I'd just come across my 20 year old bottle of the stuff in my garage and brought it into the house. Within a week I learned from a fountain pen video how to use it with ink. I like Noodler's Bay State Blue - but it can be a bit fussy. So I'll put a drop on the nib (TWSBI) before filling up the pen, or I'll put a few tiny drops right in the bottle of ink. Seems to work magic. (On the flip side, the least fussy, most reliable permanent ink I've ever found is Noodler's Polar Bear (Blue) - I travel with this and with a few Placker's dental floss on sticks I usually don't have to do any flushing for a couple of months.)
I'm going to order some of those modified Jinhaos. Thanks again.
Great comment! Thank you. What did you grind your nibs with and how? I have no grinder. I thought about snipping the tips off some Jinhao fines, (I have stacks), and getting busy figure-eighting on micromesh, but I have a feeling that you're already laughing.
@@doctorfairlight2792 don't snip. They hand grind really fast. (I don't really understand why anyone would use a power wheel or Dremel). I do most of the rough work with a Trend 300/1000 diamond stone (synthetic), then I have small EZE LAP diamond sharpeners, and finally I have a set of Micro Mesh pads (each about 2" x 2") finishing with the 12000 grit. Since I made this comment I've misplaced my TWSBI Mini that I craved into an italic, so I ground a new slanted italic nib on the stub nib of my TWSBI 580.
I find that I don't hold a fountain pen perpendicular to anything. So I found I use a 45° angle and also angled vertically on the paper. I'd suggest first grinding (sanding) something like a fountain pen nib if you want to try this. One problem is to make the nib thin - so it makes a thin horizontal line. I do this by grinding down vertically the front of the nib. When I have it about right, then I start in with the finer grits knocking down the edges so it doesn't slice into the paper.
And of course any time your nib seems a bit scratchy, just run some Infinities on the 12000 pad. Hope this helps.
However, the italic effect is minimal - maybe a professional grinder could do a better job. My understanding is a really crisp italic nib has fairly sharp corners so it'll cut into the paper. And if I could buy an italic nibbed pen with a large ink reservoir I'd buy it. They seem to sell these in the UK, so maybe the next time I'm in London I'll look for one. I bought all those sharpening tools, like the Trend, for wood shop tools so their cost might not be justified for DIY on some cheap nibs. The Micro Mesh pads I did buy for my nibs. One brand used to always arrive new very scratchy. Instead of sending them back, I just quickly smoothed them right out with the Micro Mesh. Hope this helps.
@@WillN2Go1Will, so sorry for responding this late. On 2 seperate attempts my ancient pc froze up mid reply, (I think it ran out of coal), and I lost the will.
I much appreciate the effort you made with advice. I agree about not involving electricity to grind. Straight after I posted my question to you I remembered years ago slaughtering a Plumix BB nib on a bench grinder. What an ass. It would be safer to start off using a doorstep or a brick. I have loads of Jinhao nibs tp play with from replacing them with Jowos, and man that ain't cheap. I fail to see why mass made pressed steel nibs should cost so much. I'm getting tired of all the horse shite about fountain pens. After all, one can write with anything if it's dipped in ink, so I really like what you're doing.
While whittling down, (there's no getting away from shaving stuff off is there?), Trend, Ezelap & similar bewildering choice of options I stumbled across Loft Pens on eBay. He's doing what you're doing professionally. I haven't used him yet, but he seems like he's tackling the nib grind rip off very affordably. Have a look at these and read the descriptions of what is ordered:
www.ebay.co.uk/itm/192957187130?hash=item2ced25043a:g:Bg4AAOSwz~RdC59E
www.ebay.co.uk/itm/192663402299?hash=item2cdba2373b:g:b3QAAOSwC0dbooXP
He points out how to avoid excessive postage on his items, so he's on our side. I've included the following so you don't miss it.
Customers NOT from the UK regarding combined postage for multiple items:
Before your purchase, please request a total so you do not have to pay £3.00/£4.00 per item (base price depends on location). Each additional item will cost £0.50. Any other questions regarding International Postage, please send me a message I am happy to help!
I'll give your recommendations a try Will, cheers!
@WillN2Go1 So sorr
@@doctorfairlight2792 Thank you for the reply and thank you for the ebay link. £2 italic nibs? That's amazing. The pen in the photo even looks like one of my TWSBIs. I bought £21 worth shipping £14 message says UK to California end of the month(25 days) No problem. If they work out, I'll be over the moon,. I know true italics like flex nibs may require me to slow down more than I'm willing to. Let's find out! And they are nibs, so I can sand off the corner ( I ordered multiples so I can go too far without any tears.) It''ll also be like I'll be starting from the other direction. Instead of Stub to italic, it'll be italic to whatever I can still write with. Made my day.
Thank you for the video. It was excellent. I agree with Mrs Remi's comment. I did purchase a couple of nibs from Fountain Pen Revolution and I am excited for their arrival.
I like my FPR products and Kevin provides personal sales support. I think everyone into fountain pens should try out the various FPR pens and nibs. They are an excellent value.
Agreed. After my first order from them, Kevin personally emailed me to check that everything went as expected. Great business to deal with.
He stands by his products. I ordered a ultra flex I wasn’t very happy with the flex nib loved the pen
With steel nibs, I think the FPR nib is as good as it gets. This said, while I hate the Ahab, it is, as far as I know, the only fountain pen that has a feed specifically designed for flex nibs. This is largely why it is accused of being a terrible leaker. Getting maximum flex without railroading requires a lot of ink, and a standard feed usually can't deliver enough ink to allow as much flex as a good flex nib can give.
I haven't tried it, and don't even know if it will fit, but I suspect an Ahab feed combined with an FPR nib might be excellent. As it is, I use a number of pens made in India, and they seem to perform well with the FPR nib. I do prefer dip pens, though, and I never had trouble traveling with them. I took fountain pens, too, but I also took along something this latest generation of fountain pens users seems to have forgotten, which is a good writing box.
There weren't used for several hundred years because they don't work well, and they're still made, and still work just as well, today. Of course, it also seems that blotting paper has been forgotten, too, which is largely why every review out there complains about how long it takes some ink to dry on good paper.
You know, it's king of funny when I think about it, but I'm accustomed to spending a lot of money for fountain pens with ordinary round tipping. This is what I use the most, and I love them. My favorites are the Visconti Homo Sapiens Bronze age, the Scribo feel, a pair of Conway Stewart pens, a Namiki Maki-e, and a Namiki Chinkin. All fairly expensive pens. But while I do greatly prefer vintage pens and flex nibs, where modern pens and flex nibs are concerned, I've found that cheaper is actually better.
I have friends who have spent a small fortune on building flex pens, and ended up using the FPR nib, a fairly cheap feed, either two or three channel, and a cheap pen because it worked better that their thousand dollar setup.
And if you really want to get fancy, and don't mind a fair amount of pratice, try an oblique nib. As far as I'm concerned, there is no more beautiful calligraphy than that written with an oblique nib, but it does take some time to learn how to use opne well.
And that said, I really do prefer dip nibs when doing any kind of calligraphy. I can use remarkable inks that fountain pens hate, and this alone is a big advantage. And, for me, dip pens are also more fun.
Hi James! As it turns out, most of FPRs pens also come with ebonite feeds, if you're buying them with flex nibs. I have a couple of their Jaipur models and a Himalaya. That said, I don't have much trouble with most of my plastic feeds... though some are better than others.
I do have a small writing box (actually, it's for watercolors, which I also do now and then) and I carry that sometimes, and it's fine if I'm sitting down to write a letter or two... but if I'm wandering around the city and need to stop and take a few notes in my notebook, working with a dip pen just isn't practical. Most of the time that I get to write while I'm traveling is a few minutes stolen here and there... but I still like to make things look nice if I can. I also usually carry a piece of A5 blotting paper in my notebook (a couple of my notebooks have come with a piece, and I liked the idea so I stuck with it) which is very helpful when using a flex nib... you're right.
I started doing calligraphy with an old pilot metropolitan during summer vacation (I was looking for a new thing to do during quarantine XD). The pen worked great, but then I found out about different nibs, pens, and all the other cool things that I can modify and change. In a sense, it's kinda overwhelming, but I'm glad I stumbled upon this video. It's surprising how you don't have more subs! Great work, and thanks for the guide!
Thanks! Glad you liked it. I think I'll probably have to make more that two videos if I want to earn some subscribers :-) They're coming, though...
The Wet Pen I’ll be looking forward to those :) (those were some pretty cool ink colors too btw)
First of all comparing a dip pen with a fountain pen is difficult as they are different writing tools. Spencerian pens have very flexible nib and the Ink is very different than the fountain pen ink! The closest fountain pen which provide good shading is the special edition Montblanc fountain pen with its special nib!. Thank you for this very nice review! David
I installed a FPR flex nib in my TWSBI Eco and it's pretty much my favorite pen. The FPR nibs had two levels of flex when I bought mine and I found the extra flexy one was actually a bit too much flex for me. The less-flexy one was the sweet spot.
Ahh... that's interesting! I thought that the Eco used a #5 nib, and the FPR smaller ones were 5.5 or something like that. I haven't checked them out in a while, but I'm glad it worked for you at any rate. I have some of the "flex" nibs to go along with my "ultra-flex" nibs, and I like both for different things, so I guess it's just a matter of taste and usage. Enjoy!
@@thewetpen yes, at FPR they let me know it was unlikely to work, so I figured it would be up to chance. Plenty of other things didn't work for me, so I'm glad I lucked out in this instance.
Which size FPR nib fit the Twisbi eco? 5.5 or 6?
@@clintondavis3363 Marc Kompaneyets did a nice video showing the modification needed to make the #5.5 fit the ECO. He also highly recommends putting the #5.5 on a 580, which requires no modification (I can confirm that this works well). Good luck! :)
@@thewetpen to follow up after some time -- the barrel on the Eco eventually cracked -- not enough for me to see, but enough for ink to repeatedly leak through. It was fun while it lasted!
Great video. Thanks for sharing your journey and the recommendations. Love the music and the writing and inks!
That was incredible, informative, entertaining and very helpful. Thank you !
Awesome review! I purchased a pen from FPR with the ultra fine flex nib in it already for less than $19. I think it was $13. I love it.
I have recently purchased a couple of their pens with flex nibs, too. They have models with #5 nibs and #6, and the #5 tend to be less expensive, but are just as flexy and enjoyable to use. Going to have to make another video about them, I guess :-)
what FPR pen is this? Is it a 5.5 nib?
@@sandybbeach The Darjeeling and the Jaipur V1 are currently on sale for about $10.50, and with the ultra-flex nibs, they end up at about $18 to $20
An enjoyable and informative journey through your penalog tests and travails
The FPR #5.5 nib has a smaller tip and can deliver a finer line while the #6 you have here has a fatter wetter line.
I would recommend just getting the FPR Himalaya that they make for this nib. It has an ebonite feed that helps the ink flow better. It's my favorite pen.
Hey Hannah, That's exactly what I did! Well, not exactly.... I got a Jaipur v2, then a Himalaya, then another Jaipur, but all of them were the V2, so #6. Then I got a Darjeeling (I think), which a 5.5 standard flex, and for the life of me I couldn't get it to write at all. I've been meaning to do some work on the nib, but haven't gotten around to it yet. But I LOVE my Jaipurs, and they're completely reliable.
Thank you I have been searching for this for a week straight now. Thank you very much
Good! Glad I could help 🙂
Thank you for this video. Most informative on flex I have seen. Great job.
What a great video! I look forward to more.
Thanks!
Thank you so much for this. I had forgotten about the FPR nib. I have a few zebra nibs to play about with, but would reallly rather not fiddle.
I REALLY appreciate this information . I have been looking for a flex nib for a LOOOOOONG time . Thanks buddy.
Glad it was helpful. I'm making a Part 2 of this video right now (maybe Part 2 and Part 3... I've ended up with more pens that I planned), just so you know :-)
FPR nibs are primarily sourced from India (Kanpur Writers to be precise). That's why they cost so much. In India we get a very similar ultra flex nib from Kanwrite at around ₹170 ($2).
Thank you very much for sharing, I have very bad experience with G nib with Jinhao, so difficult to install and sometimes hurt my finger, the nib won't last long and get rusty easily, will try FPR nibs, thank you.
I really prefer the FPR nibs for general use. Good luck!
Thank you so much for this! I have become a happy owner of fprevolution products shortly after I saw your video.
Ahh, glad to hear it! Hope they work out for you :-)
Very useful. Thank you so much for sharing as I was looking for the flex nib and your video just came first
I’m so glad I saw someone doing flex writing years ago. I spent years practicing. I’m pretty good at it now. I wish I had the money to buy a vintage waterman or Mont Blanc flex. I modify most of my nibs. I have a neoponset that i modified and it writes very well. The noodlers pens are so cheap It doesn’t really matter if you mess up. Lol
I've thought about learning how to do a nice flex script, but I think my list of things to learn is long enough already that I'll be satisfied with just watching other people do it now and then and being amazed :-) Still, I love my flex nibs...
I did in fact buy a Montblanc Calligraphy Flex 149, and also have the FPR ultraflex on a TWSBI Vac 700R. The Montblanc is a lovely pen and the nib very smooth, but it's not as fine as the FPR and the flex not as good.
I hate the Noodler's flex nib, but the feed on the Ahab is a guzzler, and works extremely well with a flex nib. I think the Ahab just needs a better nib to be one of the best on the market.
I’m just starting to find time to get into a little modern calligraphy. I’ve found a few online , but they’re way outside my pretty tight budget. Would you mind sharing how you learned flex writing-books, practice sheets printed off the internet, RUclips...? Thanks in advance!
Awesome video! Thank you! I use Zebra as a dip nib for watercolor calligraphy and as I am much used to it (it is really a charm to work with) I am looking forward now to trying your suggestions. Happy New Year!
Thanks Eric, good luck!
Wow, this is such an amazingly satisfying video. I will 100% try out the FPR #6 nib
I got an email from them today saying that they have a 20% off sale for Memorial day, which makes it even more attractive!
Great video, I do hope one day some of these pen companies will bring back the true flex nibs.
When using #6 flex nibs, the feed is very important. The rate of flow in an ebonite feed is much faster than in a regular plastic feed. This difference isn't noted much in stiff writing nibs, but be clearly seen in flex nibs.
The FPR nib, made by Kanwrite, performs best in ebonite feeds. The sheer level of flex without railroading is truly astounding.
You might need to tweak and tinker like heat setting and increasing flow of ink, but its a sheer delight once you get there.
There are a few other options around the same price points to the super expensive.
You can try the Noodler’s flex nib as well. There is also the Pilot Falcon or a Pilot Justus. Or you can use one with an FA nib. These are several hundred dollars.
Then you can go super expensive and get a Montblanc 149 or a Pelikan M1000.
The Noodlers flex nibs come in tipped and untipped.
I have the Jinhao 159 pen with the Zebra nib just like on this video. However after watching this video I have decided to order the flex nib #6 from fountain pen revolution. This is the exactly the flex nib that I have been looking for that would not tear up the paper like what the Zebra nib would do.
If scratching is your problem, just get tachikawa g nibs. Im not even sure why people use zebra nib...
This is a great explanation of your quest - thanks!
I was really excited by the FPN nib, until I discovered they charge $20 shipping.
Ouch... you must be outside the USA :-) Shipping is pretty reasonable here. Good luck finding something more reasonable!
@@thewetpen lol, we live in a china almost free shippings world. $20 shippings sounds nowhere near reasonable. Thats what quit me (and probably millions more) frome buying cool stuff from US back in circa 2010. Then China did the rest...
Just exactly what I needed to see! Thank you.
My pleasure :-) It's been a few years and I've learned a bit more about flex nibs, so it's probably time for me to make a new video, but these FPR nibs are still at the top of my list (for options under $100, anyway).
Just discovered your channel and love your approach and quiet voice and excellent choice of music. Very well done. I have had the same experience with FPR ultra flex on non FPR pens. It’s strange how on his pens they don’t have the same result that I get on other pens. Maybe it’s his ebonite feeds. Don’t bother buying the new improved JoWo omniflex nib as it doesn’t flex, but does write much better than the older versions. I’m subscribing and look forward to more reviews.
Thanks! I've had mixed results with FPR pens. I now have a pair of Jaipur v2 pens, and they work flawlessly. I have 2 Himalayas, also, and one was so terrible that I sent it back. The other works nicely with standard nibs but not with a ultra-flex... it's temperamental with flex.
Thanks for the help. I've tried a couple of things you tried, like purchasing the flex nib, the installation of Zebra G. Still, neither of those worked out for me. I just ordered a couple of pens and a FPR #5.5 two-toned flex from FPR. Thanks for the tips!
I got a Noodler flex nib last year on a Conrad. It was fussy, railroads, and I adjusted it and it got better and was a lot of fun, even the learning and adjustment. But in that research I found FPR, and this year during the holidays I got FPR Jaipur V2 on sale. It wrote correctly out of the box, preformed better with no railroading if I took my time. I suggest this nib to folks, the Jaipur has a piston so has a good ink capacity, a must with wet writers. It also has a ebonite feed, something that seems to help keep up with the ink needs. Naturally if this isn't enough of a feed, you can make adjustments, I would suggest very little at a time.
Name please smoothest nib of pen
This is so helpful! Thank you for sharing!!
I've used fountain pens for decades on and off and a couple years ago got more involved and recently have started doing some work on ones I own. I've had some Zebra G's in straight and oblique holders for a couple years now, too, and they are a lot of fun, but only at home. I want a flex pen to carry around that won't break the bank. So the side by side comparison of the FPR with Zebra G is helpful to me, thank you! I've also thought that the FPE Ultra Flex nib could be ground finer if one was willing to. I may get a few and try this. I've also wondered if their ebonite feed would help with the ink starvation issues/railroading, I suspect it would. The Sheaffer Snorkel uses a tiny piece of ebonite with a slit in it in the snorkel to deliver ink to the feed from the sac and I was astonished at how effective it is at that task, and how quickly it flowed water or ink along its length. This is partly the very fine capillary spaces, but also the easy wetting nature of the material. Again, thanks for this video!
I bought the FPR ebonite feed with one of my nibs, thinking the same thing. Unfortunately, it isn't the same size as the Jinhao feed (which has a flat side, as you know), and it would take some modification to make it fit in any of my pens, so for now it's just sitting around in an envelope. The Shaeffer Snorkel sounds interesting... I'll have to check it out!
@@thewetpen I'll likely buy some of their inexpensive pens with ebonite feeds to try my experiments. Thanks for the heads up about non-fit and all.
Yes to detailed video.
I did end up making one :-) Just follow the link: ruclips.net/video/4Al9lAZFxQw/видео.html
There are a couple of sellers on AliExpress who are selling the Zebra G nibs installed on Jinhao x450 & x750 pens. I ordered one, so I'll come back once I get it. It's literally on a slow boat from China so it will be awhile. It was actually cheaper to buy it that way than buying the pen and nib seperately.
I’ve thought of buying on AliExpress, but I’m too chicken lol. Dying to know how your adventure went! Was the flex pen worth the slow-boat wait?
@@vnikyt yes, they are wonderful. write and flex very well a I bought two: 1 cost SGD7.50 and the other cost SGD13.50(with screw cap)
When it comes to flex, I look for the ratio of unflexed to maximum flex. I think it should at least be a 10:1. Zebra G likely uses hardened steel (which acts like a spring) to get needlepoint to italic but it is not water proof. Other nibs are water proof and use basic stainless steel which isn't very flexible and attains a mere 4:1 flex.
A very educational review on flex nib.
Fantastic video, just what I needed to make the choice!
Osprey Pens makes some nice flex nibs. On their site, you have to purchase as part of a set up..(section & converter) for their brand of pens. I threw their pen away but put the medium flex nib in my Giant Sequoia. Great daily writer. They are made in India, same as FPR nibs. I tossed out the Madison pen because of converter leaking and super strong resin odor. They make EEF through Broad nib flex in #6 and also #5.5
Thanks!
Great informative video, thanks for sharing your opinions.,
PNW represent! I'm just now getting into the hobby, and have started writing fiction in fountains. I can't wait to get a good flex!
Glad you found the channel! I need to make a part 2 for this video... there are some more good options out there, too.
@@thewetpen I would really love that. Also, do you know of any good pen shops in Seattle or Portland? I don't mind shopping online, but I'd love to try some pens too if there are still stores that stock good flex nibs.
There aren't really any good, big pen stores that I'm aware of in the northwest here. The closest thing is the Kinokuniya Bookstore in Seattle, adjoining the Uwajimaya. They have a nice selection of inks and some nice pens, and they might have the Pilot Custom Heritage 912 with the FA (Falcon) nib, which is a good flex, but any Falcon nib might be interesting to try out. Good luck!
Thanks for sharing. There are very helpful tips.
Came across this video and thought I'd give fountain pen revolution a go, previously had the Noodler's Ahab and was disappointed with how much pressure was required to flex as it became tiring after a few sentences. After ordering the 5.5 extra fine ultra flex nib for my twisbi eco and a 6 for my jinhao I was blown away, it is as close to a proper vintage flex that you can get in stainless steel. Definitely recommend checking them out!
FPR also sell those nibs in gold as well. I've been dying to try them out. At this stage I've been very happy with their steel versions so haven't seen the need. The price is pretty steep too so didn't want to fork out the cash until I saw a decent review comparing the two....
Sounds great! Do you think the 5.5 will fit a Twsbi Go? Thanks in advance!
@@vnikyt Yes should fit perfectly!
@@ajazhussain7167 wow, didn't expect you to reply so quickly! Yay, it'll fit! You're a star; thank you!
FPR Ultraflex nibs will flow even better if you purchase one of their pens that include an ebonite feed modified for increased ink flow.
I bought one of their nibs along with an ebonite feed, but was too much of a novice to be able to do anything with it, so it's just sitting in a box in the back of a desk drawer :-) It didn't fit the JinHao feeds without modification... but I wonder if it would fit into my Duragraph? But yes... I'd probably be better off getting one of their pens or screw-in nib units.
Thank you! =) I will think more if I really want to have a flex nib and if I do I will get that Aliexpress Jinhao. I didn't even know that was an option and it seems much better than the Noodler's Ahab which until now was the cheapest flex nib I knew about. But that Jinhao is a proper flex nib while the Ahab seems to not flex that much
Very true... the Jinhao pens are a good, cheap option to play with, although the nibs don't last forever, and they're often glued in and can't really be changed, so keep that in mind. Another good option is the Osprey Madison with a Zebra G nib... it's about $30, I think, but you can switch out the nibs whenever you want.
every one I tried this and it was so hard. In the end, I broke the nib and the feed. I don't think ill try this again.
I love the idea of a flex nib and bought an Ahab to try it out. I was very disappointed. My experience was similar to yours with the Conklin omniflex nib. Also, that Ahab leaked ink all over me every time I used it. These $20 Nibs you found look promising. Thanks!
I eventually also bought an Ahab, just to try it out, and was similarly disappointed. I like it as a pen (mine was very reliable, just not flexy), but not as a flex pen. I understand that many people don't have the same luck that I did and need to tinker with the feed a bit before it's reliable.
Awesome ! Have you tried lubricating your ink ? May help with smoothing the tip
Amazing! you just made my day. Ordering the FPR ultra flex nib now! I haven't checked yet, but did you list the inks u used for demonstration with the FPR? If no what are they?
I did list them at the end of the video, I believe. (yes... at 10:08) This was my first RUclips video, so I'm (a little) better now about mentioning what the ink is when I'm using it :-)
I don't know how I just found this video. I'd be interested to hear if you have any updates to this list. I am a flex nut so I've tried tons of different options.
My favorite in my lineup is my Stylosuite Xwing Harpoon customized by Les. It's the perfect combination of flex, extra fine lines, and springiness.
I think second on my list because it's so accessible price-wise is the FPR ultra flex nib. I have one on a twsbi vac mini and it's rad.
I also have some some expensive Franken-pens like a pilot FA nib in an Opus 88 demonstrator with a 3 slit ebonite feed. While I like it a lot, the cost is prohibitive and the results aren't really better than the FPR.
Thanks for sharing! I always love your videos!
I've also added a bunch of flex pens to my collection over the past 4 years since I made this video, although I'm not sure that any of them are really any better than an FPR... I still haven't tried the FPR gold ultra-flex. I do have a Magna Carta Mag 600, and it has a nice flex nib, but it's expensive and doesn't seem any better than my best FPRs. I have a Pilot Custom Heritage with the FA nib to which I've added an ebonite feed, and it's also very nice, but the level of line variation is somewhat modest. I do also have a Blue Dew, but the nibs on them are untipped, so they're like writing with a G-nib to a large extent. I have an Osprey Madison, also, and it's great for use with G-nibs, but I rarely use it now. Chrisrap52 gave me a vintage Waterman with a flexy nib... there's a video about it on my channel somewhere 🙂I'm sure there are others that I'm forgetting. I really need to make a follow-up video to this one.
Holy crap that's what I want!!
I'd love a detail video on how to convert a Jinhau to the Zebra nib. Appreciate the detail.
This was the amount of detail that I could muster: ruclips.net/video/4Al9lAZFxQw/видео.html
Please do post a video on how to switch the nibs on the X 750. Also on switching nibs in general because I always seem to have problems. The nibs never come out as easily as you demonstrate, for example. That whole $4 pen and $16 nib thing is attractive to me since I'm partial to the heavier pens like the metal Jinhaos. Thank you in advance. I also agree with EL Che's comments.
Thanks! It doesn't seem to get any views, but I actually DID do a short video about switching nibs on the x750. Not sure that it will really be of any help (some nibs are just harder than others), but it's worth a shot: ruclips.net/video/4Al9lAZFxQw/видео.html
Matthew Gore thanks!
Of all my many pens, the only ones inked up now are my FPR Jaipur V2s with ultra flex nibs in all four ebonite colors.
I have only two of them, but I do love my Jaipur V2s (I have a blue crackle and a black ebonite). Great pens :-)
Fpr feeds can't keep up.
I saved up and bought a Pilot Custom heritage 912 with the gold flex Falcon nib. The big Con 70 converter keeps up perfectly.
I also have a Conway Stewart with a gold fine stub flex nib.
This is beautiful to see in green black cracked ice celluloid and performs perfectly. £45 off ebay UK.
Fpr and any pens from the USA get hammered with heavy import charges. The Pilot came from Hong Kong and had no added import duty
Hi Neil. I've had mixed results with plastic feeds from FPR or Jinhao or anyone else. I have one Jinhao feed that keeps up endlessly, but most of them require me to slow down every now and then. But I bought an FPR Jaipur a few months ago with an ultra-flex and ebonite feed, and it's great; it never railroads, even when I'm writing fast for long periods. In the same order I bought an FPR Himalaya, also with an ebonite feed, with a standard flex nib instead of an ultra flex, and I never did manage to get it to work... it was either too dry or would dump ink all over the page (they accepted it as a return). So, it seems as though there's some luck involved... but 3 of 4 of my pens from them have been good and reliable.
I really want a Pilot with a Falcon nib, too. It's on my list :-)
Neil Piper, is that correct about pens from China coming to UK customers without crappy customs import and handling charges? What about from India? Would a package from there swerve our over-zealous customs people? The nee restrictions on us buying from USA are frustrating.
@@agnessmythe3521 I have only had customs duty charges from the USA to me here in the UK. I buy from China and Hong Kong, mostly with free postage. It's faster now than it was 6 years ago. 2 weeks on average.
I too have considered reviewing, so I am happy that your channel was suggested. I will echo one of the previous comments. I liked the music, your no-nonsense yet thorough review of a topic I have had almost no experience with. I hold almost the same position regarding calligraphy: I am neither interested or talented enough (at this age particularly) to try true calligraphy; yet, like you, I love to add a little flair to my own personal writing occasionally (usually on cards sent to a friend). Keep up the good work. As most of us would say, I always think it is best to be yourself. So, I like that you do not try to copy others. Best wishes!
Thanks, Keith! I just bought a pen from FPR, so maybe I'll review that in the future, too. With my normal work schedule somewhat disrupted at the moment, I'm looking forward to getting a couple of big projects out of the way so that I can get back to work on my videos here :-)
Thank you. Thank you thank you thank you thank you thank you!
Any time, my friend!
Do you prefer the Tomoe River 52 or 68 gsm? Also what is that beautiful green ink?
I usually buy 52gsm because I didn't realize at first that 68 was available in loose leaf, but I prefer 68. The green ink is called "Lemur Lime" and is made by Blackstone Inks exclusively for Lemur Ink. I think that Blackstone may have gone under, do I'm not sure if it's still available. I love the color, but it does crystalize all over the nib if you let the pen sit unused for a couple of weeks.
Hi, thank you for this amazing video, beautifully explained. I’m doing oblique dip pen with nikkoG, and I would love to try on one of those jinhao fountain pen. If you have done a good video on this matter I would be strongly interested ;-)
When I was a teenager, I used to transform my old Waterman fountain pen in stub nib! (no internet :-D) It was savage, but worked for me at that time. Tx
Hey Steph, I can't promise a good video... but I did make a video about the Jinhao/G-nib conversion... you can find it here: ruclips.net/video/4Al9lAZFxQw/видео.html
When I was a teenager, I inked my mom's Waterman fountain pen up with some black carbon Sumi-E ink. Also brutal. It still smells like charcoal, though it finally writes again.
Diamane blue velvet is wonderful for flex nibs :)
Very nice video. Thank you. RS.
My experiences with FPR pens hasn't been a happy one. I've bought two and when they were working, they were fire hoses. The ultra flex nib with the gold colouring looks very attractive.
My experience with their pens has been a little mixed but mostly positive. I first bought a Himalaya with an ebonite feed and medium nib, which I removed and installed an ultra-flex nib, and it was unreliable, so I put a medium nib back in it and it's been great. Then I got a Jaipur with a ultra-flex nib pre-installed, and it was absolutely reliable from the start, and I absolutely love it. But in the same order, I got another Himalaya but with a standard flex nib, and it either didn't write at all or drained the entire converter onto my paper in one fell swoop. I replaced that pen with another Jaipur, and it has been good, but it wasn't as reliable as my first Jaipur until I re-set the nib and feed about a dozen times. Now it's pretty perfect. So, yeah... they're not perfect, but if you're willing to tinker a bit, they can be great.
This one can be a bit expensive, but Flexible Nib Factory sells adaptors with ebonite feeds that fit the Zebra G onto pens that accept jowo6 nib units. I have mine on a psp ranga bamboo model and it's an absolute delight to work with, though I would prefer a thinner pen
Yeah, those look really cool! Osprey also makes some pens that have a section/feed that is specifically for Zebra-G sized nibs... also somewhere around $50, if I recall. Both really cool options, if you don't mind spending the money. For me, I think that the Jinhao method is easy enough that I don't mind doing it for when I want to use a dip nib... but I really prefer a standard writing nib that can also flex, just for writing comfort.
@@thewetpen I've actually had the Osprey too! Imo there were too many places for leaks on some models since the section forces you to use pens as eyedroppers.
I have a desiderata also, but only because someone was selling it for about 2/3rds of the regular price. Of the three I prefer the FNF option best. Especially since it opens up for upgraded pen bodies should you decide to do so.
Happy writing!
I'v installed a flex nib on a waterman Allure. It works fine
very inspiring pen review
i sprung my omniflex within weeks of having it, so i've been looking for better options. i do like the noodlers ahab quite a bit because it's sturdy, and i've never gotten the Zebra G nibs to work in a fountain pen. with definitely check out the FPR nibs!
I have a couple of Noodler's pens, and they're good pens, but the nibs are not very flexible. FPR sells "Flex" and "Ultra-Flex" nibs; the one that I showed here was "Ultra". The nibs that came on my Noodler's pens were the standard "Flex". The exception is the Noodler's Triple Tail, though they tend to be a bit scratchy. Good luck!
Goulet now offers a #6 flex (jowo I think). We need a showdown FPR vs. Goulet!
Their #6 flex is a JoWo like this Conklin, although theirs is the new model so they look a little different. Performance is about the same though... not really very flexy 🙂
@@thewetpen Makes sense. Monteverde/Conklin use Jowo, and Goulet spare nibs are... Jowo! Then we already know from your experience it's an underwhelming flex.
Excellent and informative review - have you tackled sharpening a nib to be a fine but wet writer? Would love to learn how this is best done.
Hi John, No, I haven't tried anything like that yet. When it comes to nib and feed customization, I'm pretty much a novice, so I'll probably be taking it slowly over the next few years before I tackle something like that and feel comfortable telling people about my results :-)
Another important element of the flex pen is the Ink, the ink of a dip Spencerian pen is thicker and would block a fountain pen. In addition the Spencerian pen or calligraphy pen is angled as well so it it not possible to replicate this type of writing with a fountain pen by just changing the nib. Nice video though! .
Nice informative video ,just bought an abalone endura with an omniflex nib as I wanted the pen and didn't have a pen with a flex nib,I hope I won't be too disappointed as I'm seeing quite a few people who don't rate the factory supplied nib..😬...oh well if it doesn't cut it I guess I will have to try and find a replacement nib.Thanks again and greetings from England.
Hey Jeff! Those abalone Enduras are pretty sharp looking pens... I've had my eye on one, too. I'm afraid you probably will be disappointed in the omniflex nib, but luckily, there are some really good replacement nib options from FPR or Kanwrite in India... not sure which will have more reasonable shipping to the UK.
@@thewetpen Hi,thanks for your super rapid reply👍,could you recommend a specific nib to change to ?,...thanks for your interest .
@@jefftaylor4707 Assuming that you're looking for a good flex nib, then the FPR nib mentioned in this video would be a good choice ( fprevolutionusa.com/collections/6-nibs-and-nib-units/products/fpr-6-two-tone-ultra-flex-nib ) and the Kanwrite ones don't look like they're available separately right now... kanpurwriters.com/product-category/nc/
@@thewetpen Thanks again😉...stay safe in these mad times.
The only problem with this video is that there are only 2 more on the channel!
Very nice. I have a Jinhao x750 with G nib...doesn't work very well....ink flow problems
I know this is old but bluedew is a good option. It’s pretty much a stainless steel leonhardt principal dip nib. there’s also the pilot fa nib and falcon that’s but those are more expensive options
Thanks! I got a Bluedew about 6 months after I made this video, and it's got great flex, although it's not tipped... so I get the nice fine lines with it, but it's scratchy compared to the FPR. The Pilot is now one of my few pens with a gold nib... I'm still not sure why I decided to spend that much money on it, but I love it!
Why don't you build your own super flex nib ? With a dremel grinding tool , and a round grinder , you can take whatever nib you want . Adjust and grind the sides away to make the breth of the nib thinner , like your last choice here , so that the metal flexes better because of less support and thus resistance on the sides . Also use ebonite rubber feeds that you can heat set , to accomodate every "section-adjusted flex nib" combination that you have chosen or created . If it works you'll have much more control over your pens . To the more extreme you can try to make two or three slits in a nib to adjust the flex , and create a music nib yourself for no money at all . Just try to obtain a thin saw . Isn't that fun ?
That does sound like fun, but it also sounds like more work than a beginner is likely to have success with. Maybe I'll start playing around with that sort of thing. In the meantime, I have several new flex nib pens that are working out perfectly for me.
Hi Matthew. You earned my trust regarding fountain pens. I got a kaweco sport and a ordered a kaigelu based on your video, yet to arrive. I am looking for a full sized pen for my desk, possibly to be used with bottled ink and with piston or vac or eyedropper. I would like to stay below 50€ in eu and the only option I found is the eco, which I don't quit like. Would you suggest me something please? Especially not the usual big names
There are lots of good pens out there for under 50 Euros, but it's hard to recommend one in particular. My recommendation is to find something that will be personally meaningful to you somehow. For example, I really love my ASA Nauka, which reminds me of my Indian girlfriend and our time spent in India, but the same pen might be very boring to someone who has no personal connection. If you don't find something like that, then take a look at: the full range of Nahvalur pens (Narwhal); I have an ebonite piston filler one and it's probably the pen that I use the most in my day to day life, though it's a bit more expensive. All of their nibs are great, though, and they're all piston fillers, I think. Also, take a look at PenBBS pens. If you want a hand-made pen, then Ranga's Abhimanyu currently still has a group buy and they're $59 USD, so right in your range. Good luck!
I like the first pen that's what I want looks like it would be good for everyday small calligraphy writing at work and school
It would be great, if it actually flexed reliably. Luckily, there are lots of better options, now. Check out the Osprey Madison :-) www.ospreypens.com?aff=41
Have you tried the pilot Falcon?
Yes... there are actually a couple of different ones. The one that I have and like best is in a Pilot Custom Heritage 912 FA, and it's a gold flex nib with a shape that's similar to the FPR nibs in the video. The more common Falcon nib with the unusual shape doesn't flex quite as much, but it's nice too. The 912 that I got was something like $160, so not too bad for a gold nib Pilot.
Thank you big time. I have the FPR nib and a jinhao with bad nib will fix in am.
Name please smoothest nib of pen
I'm kinda surprised you didn't mention Noodler's. I've been using the same Noodler's Ahab since 2016 for all of my flex pen needs.
I bought one after I made this video, and I really like the pen, but mine is not really very flexy... it takes too much pressure to make it flex, and it doesn't flex very much even then. It's similar to the Conklin in that regard. But as I said in the video, I'm no expert, and was even less so when I made this video a couple of years ago, so there are plenty of flex nibs that I haven't tried yet 🙂
Thank you for this!
Any time :-) Glad you liked it!