thank bro for making pinaut earlier video more clear. we have made it bro, really really we appreciate your skill . especially we had problems with buttons , when we used pinaut's video, while you made it so clear with code n diagram.Finally we made our final engineering project with your support. A final vote of thanks to Pinaut's idea.
I have used the same code given in comments section bro. even I have the low memory problem showing in Orange color down below after compiling, but it is of no problem.(9.9Mb).
Sir can you please help me to solve my problem? I tried in bread board, complete whole project but after I upload code in nano after that applying supply voltage (dc) I can't able to perform.. moreover Arduino nano's red light is not generated after removing from laptop
yes its all your's credit btw how is my work, its not upto your's level, i would like to have your comment on this, i am watching your video since last 8 month to get idea about
your robot doing great! sure! btw: i like your cnc-plotter video! music is worst, but the cnc stuff from cdrom is great. Working on same since couple weeks. great!
ok done. the file need to be in that file named folder in order to open in IDE. tq very much . great work. superb. the fact that arranging the potentiometer like the robotic arm also is great method. really help on the setting up the robotic arm movement. never seen that arrangement before.
hi, manage to add the programming to make it 6dDOF. but cannot use Arduino uno since the dynamic memory is not enough for 6DOF, must use arduino mega. how to reduce the delay after complete 1 playmode cycle of the recorded movement, now it is about 15sec before it repeat the loop.
Excellent. Can you please extend it to 16 servos (Or at least 10 DOF) using Arduino servo shield 2+16 (or PCA9685 or any other I2C board) with one joystick or a pot to record the position of each addressable servo and play automatically thereafter
please help me, the code doesnt work for me i made all the right connections but the serial monitor only works till mini robot read none of the motors or potentiometre work im so disappointed.... help me please
bro wonderfully you explain that but i have 2 questions (1) is when i record i must need to connect with computer and witch soft i need to b use.(2) when my recording done can i remove potentiometers.
Can make this but the condition is you have to use application made with thunkable or app inventor and don't use pot but your arm has function of record and repeat can you make this for me please I am trying from long time but I am not succeed in this
Hi everyone nice project and I interesting with the setup and the code features. I have a problem when I verify and upload the code in both Arduino UNO or Nano, I receive this message "Low memory available, stability problems may occur." anyone have an idea about the message?
thanx for giving me such idea . I was going to use Arduino Uno u told me a easy way for making it 😀😀😃😃 he but when when I click on the link I didn't get the Arduino code plz help me bro
I did it with success. Everything is okay but the record-play is not working. What am i supposed to do for play-record. By the way I only use 1 power supply 5v. arduino is idle. Please answer me.
sir , while making the project we are confused with the connections of motor to aurduino .and as it is not clear from vedio which motor is j0 ,j1, j2 and j3
The program is not working please help my laptop said Low memory stability problems may occur An error occurred while uploading the sketch WTF is that help please
thank bro for making pinaut earlier video more clear. we have made it bro, really really we appreciate your skill . especially we had problems with buttons , when we used pinaut's video, while you made it so clear with code n diagram.Finally we made our final engineering project with your support.
A final vote of thanks to Pinaut's idea.
krishna chaitanya can you give me more detail of buttons connection
yaa of course we followed the way told in this video it's Crystal clear n we got results
Thanx for replying me....Bt I have low memory problem....How to solve?? Or give me code if possible..😃
I have used the same code given in comments section bro.
even I have the low memory problem showing in Orange color down below after compiling, but it is of no problem.(9.9Mb).
and I used Arduino uno
Sir can you please help me to solve my problem?
I tried in bread board, complete whole project but after I upload code in nano after that applying supply voltage (dc) I can't able to perform.. moreover Arduino nano's red light is not generated after removing from laptop
would be nice you give a link to the maker from the code you share here
Yeah sure
minimum decency if u share would be credits to my work ;-)
yes its all your's credit btw how is my work, its not upto your's level, i would like to have your comment on this, i am watching your video since last 8 month to get idea about
your robot doing great! sure!
btw: i like your cnc-plotter video! music is worst, but the cnc stuff from cdrom is great. Working on same since couple weeks. great!
thanks to acknowledge your ZENrobot looks pretty much interesting thanks for sharing such wonderful works
ok done. the file need to be in that file named folder in order to open in IDE. tq very much . great work. superb.
the fact that arranging the potentiometer like the robotic arm also is great method. really help on the setting up
the robotic arm movement. never seen that arrangement before.
Hello. Can i build all the circuit on breadboard???
Diagram is perfect ???
Y n N.
can i use the same code and connections for arduino uno
Thank you for share this creation.
nice work sir
in the case of 6 axis robot what are the necessary changes that I should make in code
no code explained?
It is posible save record to micro sd? And play back from micro sd?
Can we use Arduino Uno
Give answer
hey man , may i use MG995 servo motors with these ?
reply Bro so that i can make my project based on this .
Yes it will work
can this program works on different type of arduino?
hi, manage to add the programming to make it 6dDOF. but cannot use Arduino uno since the dynamic memory is not enough for 6DOF, must use arduino mega. how to reduce the delay after complete 1 playmode cycle of the recorded movement, now it is about 15sec before it repeat the loop.
Can i use servo greter for this
hoy do you make the potentiometer so estable?
Excellent. Can you please extend it to 16 servos (Or at least 10 DOF) using Arduino servo shield 2+16 (or PCA9685 or any other I2C board) with one joystick or a pot to record the position of each addressable servo and play automatically thereafter
I did one …thanks for sharing!!!
please help me, the code doesnt work for me
i made all the right connections but the serial monitor only works till mini robot read
none of the motors or potentiometre work im so disappointed.... help me please
Can I use Arduino UNO instead of Arduino pro mini ??
i think in the circuit diagram the server pin 5 is wrong ,its digital pin 9 in the code.
How can I reset the recorded code?
It will be ok if we do not atteched power pin 5v
bro wonderfully you explain that but i have 2 questions (1) is when i record i must need to connect with computer and witch soft i need to b use.(2) when my recording done can i remove potentiometers.
(1) You need to use Arduino software. (2)Yes.
greatfull work!!! thanks!!!
do you use multi-turn potentiometers?
can you tell me how to wairing all stuff 🧐 🧐
Hi i used your cord.but my servo arm have 5 servos.but i edited your cord.then arduino get massege not enough memory.cant upload .how to fix this
Sir I built one.but it is very slow comaperd to yours. Please give some suggestions..how can I made the servo moving fast like as shown in video.
make sure you have separate and sufficient power source for servos
Can make this but the condition is you have to use application made with thunkable or app inventor and don't use pot but your arm has function of record and repeat can you make this for me please I am trying from long time but I am not succeed in this
u r genus
How did you make the part of the hand that opens and closes????
it is made from CD cover plasic
May I ask where the reset button is? And there is no reset button
what will be the average cost of this entire project?
pin13 led is blinking..wt to do?
??
hc-05 Bluetooth module can be control by earplug like thing?
Can you explain in detail
Mr innovative can u make a video on how to control robotic arm via Bluetooth with record and play feature
I make this all but i am going to upload code i get receive this error 'low memory available stability problems may occur' how can i solve this
good morning. The code is completely correct?
yes it is correct
Ie i do not have to modify anything to make it work?
Is that I see some codes in text mode
why arduino nano is connected to pc throughout the operation of the arm ? can't it store program in it ? plz reply me i m little confused
it just connected for power supply thats it
I have arduino uno R3 can I use this code
I make it. But the problem is,it is recording but it not playing.
Can someone help me what's the problem
Hi everyone
nice project and I interesting with the setup and the code features.
I have a problem when I verify and upload the code in both Arduino UNO or Nano, I receive this message
"Low memory available, stability problems may occur."
anyone have an idea about the message?
i also have this msg. this not an error just upload the code it will works perfectly
It means u used all the ram in the Arduino. Try to reduce the count of variables.
bro my arduino led keeps blinking when I press button and arm doesn't move pls help !!!!!!!!
Can i use the same code if i using arduino Uno?
can you explain the program of this arm...?
please...
have problem....wen I connect two pot and two motor servo moving crazy...and I remove one pot ...two servo moving crazy via one pot ...help me
very nice! Thank you so much!
thanx for giving me such idea . I was going to use Arduino Uno u told me a easy way for making it 😀😀😃😃 he but when when I click on the link I didn't get the Arduino code plz help me bro
Can't with breadboard?
can you tell how much is the power taken by arm or how to calculate it plzzz
?
anyway got that thanks
I have problem in connections
So plz help me out plz
I did it with success. Everything is okay but the record-play is not working. What am i supposed to do for play-record. By the way I only use 1 power supply 5v. arduino is idle. Please answer me.
How bro? Where did you connect the servo and potentio?
Best project
HOW TO RESET THE RECORDAD PROGRAM TO UPLOAD NEW PROGRAM PLEASE HELP ME SIR
sir , while making the project we are confused with the connections of motor to aurduino .and as it is not clear from vedio which motor is j0 ,j1, j2 and j3
same problem here...not able to recognize which motor is connected to which pin in aurdino
also i am lil bit confused with the connections of potentiometer
HELLO SIR i want to purchase arduino nano so the soldered one an d the unsoldered one both are same or different
UTTPAL BHALU both are same
cual es el programa para la computadora
Hello,
how to read the current position of servo?
bro cool project. maybe inspired from pinaut
The program is not working please help my laptop said Low memory stability problems may occur An error occurred while uploading the sketch WTF is that help please
Plz give proper name of ext power pin 5v dc
How to connect this to laptop and how to get code plz tell me bro
Plzz help me in the wiring i m using Arduino uno
mai bhi bna liya hu lekin programming krte nhi aa rhi hai sir aagr aap bta dte to bdi kirpa hoti
awesome!
how you connect wire in pot
go through anticlock wise 1st is ground second is for data input and 3rd for postive
where to get code
Cn i do with arduino uno
mast hai sir
sir the program is not working please help
hi sir. I am having this error - redeifine void setup()
where can I get code for it
is it in description
Please give your contact i am in trouble to make this project
But not uplode any code
why the servo is not working
need some more detail,
your mediafire code file is not open please slove this problems.
nice
thanks
nassim is number 1
It cant record anything...plzzz help me to out from this problem if any one knows plzzz tell...
Pcb wiring diagram
How did u make the arm ?
My arduino nano not working after upload your code...
where is arduino nano code
Epic!
No credit to original maker. Shameful ....
Where is the code bro plzzz send me the code bro
how to delete and play other funtion
amazing science Raj just press reset button of arduino it's ready for new commands old one are delete
Thank you sir which country are you form
amazing science Raj India
OK sir thank you why don't you built an wireless robotic arm
is it your code? cause you dont explain anything of it!!!!!!
Please Bro I Need Help..
I am using Arduino Uno.
i need a code for Arduino Uno.
all types of helps from viewers also appreciated.
Me too
please help me
where arduino code
Power led on
👍
Please answer
nice copy of Pinaut's robot .
U make us fool the recording and pause not working...😒😒😒
bro hindi me