22mm lugworm bait pump washers Made From Silicone and Water
HTML-код
- Опубликовано: 27 авг 2024
- how to make 22mm lugworm bait pump seals that cure in 3hrs.In this video, I am going to show you how soapy water and silicone can cure fast making great lugworm bait pump seals.
If you're looking for a quick and easy way to cure pump seals, then this video is for you! By using soapy water and silicone, you can quickly and easily cure the seals on your pump. This method is great for use on a variety of silicone sealants, so be sure to check it out!
Nice one Dave.
Hi Matt Hope your doing well mate thanks for taking the time to post tight lines
Be interesting to see how they work when your lugworming
il find out wed evening start of the big tides
Hi there, can you tell me what your mould is made of please and size and depth of the hole in your mould, many thanks, Mark.
Hi Mark the mould is made from 12mm nylon chopping board with an 19mm hole i hope this helps you
Do you put silicone into water first and then try to combine all together to one piece?
cold water some washing up liquid mix together then put the silicone in then mix together it seem the longer you leave it in the water the faster it cures good luck
Hi mate how long do you have to leave the silicon in the soapy water before you can take it out and mould it cheers
Hi you should be able to mix it straight away then put into the mould but i did find if you leave it in the water afterwards for 5 min it became alot firmer also try to squeeze as much air from it other wise you will get bubbles in the seals good luck
Hi bud can you do a video on how you mix the silicone ,from start please great video pal cheers
How long do these last ?
Hi it all depends on the type of sand you are pumping on 1 homemade washer will last me a week of heavy bait pumping anything up to 4/5000 worms depending on tides too.A tube of silicone makes about 40 washers and every day they are curing once out of the mould hope that helps plus u don't need tons of washing up liquid
For a 22mm pump what size hole did you drill for the mold?
Hi I drilled a 19mm hole
do you make bait pumps to sell mate?
HI Sorry but i don't sell them i just make them as i need them they are so simple to make