I only have 3 gripes from what I see 1. They need to make the joints tighter! 2.Butterfly joint could be better. 3. The shoulders way to small when you flexed biceps you notice it and it looks bad. They could've made shoulders bigger to fit proportion and it wouldn't have hindered articulation. Other than that figure looks so much fun! Can't wait to have one.
The joint issue is because they were MEANT to be customized. The joint were apparently designed to factor in additional paint or sculpt work. I agree that the shoulder to bicep area is way off when you rotate it. The butterfly looks like it's hitting the sides of the pectoral muscle sculpt, so some light sanding there might increase the range.
@@TheSalemCrow the problems that as we see, sometimes the joints move just cause of SCIENCE, and while great for customisation, means you have a much weaker figure. The only points I want tighter is the butterfly joint but others could be tweaked too
I've never seen these before. The sculpt looks incredible. Not too sure about the torso being straight up and down. Could do to be a bit more V shaped. Thanks for the vid.🙂
I always enjoyed the big bruiser type like Big Jim from the mid-sixties. Hope they fix the wobbling problem in them. Thanks for sharing your treasure. Excellent review!
I pre-ordered the deluxe grey version from BBTS so hopefully I get mine in the next few weeks. I plan on using a couple of heads for the Hulk & a couple for Kingpin. For those of you that have Mr Hyde, these heads with the hair extensions would work great imo
I sometimes find that batteries can drain in cameras while not in use. To maintain charge maybe consider removing batteries it when not in use. If it's draining fast while in use, that may be another issue. Some camera can also use power aDapters (plug) for use in studio environments environments. Could be an option for you.
Shao Kahn, Hulk, Juggernaut, Goro, Thanos, Doomsday, Darkseid, Bane, a beefed up Spawn, Broly from Dragonball Z/Super, Hugo from Final Fight.. The list goes on... 👀 I love the way Choco Titan looks, man. Super dope, figure. 👍🏻👀
Yea, I pre-ordered 2 of these in flesh tones and some of the female sculpts with the hope of being able to try custom heads with clothes to get easy customs. Stellar looking bodies!
I have a blue Titan on order as I am building an evil Kree Avengers! Quite frankly, as is, it makes a good Kree Hulk! Don't think I even need to do any customizing. So, he will be the Powerhouse. I thought about a Green for a Skrull, but Green is too much like an actual Hulk.
To answer his question, yes, they are deliberately loose and easy to disassemble for ease of customization. I went over this in my own review of the, I'm not sure it was necessary to do what they did here, but it is as advertised.
Good video, my only complaint is I can't decide who I'd wanna customize him into: Zodd, 2k12 Super Shredder, Mike Haggar, Rick from Splatterhouse, knightfall Bane, Mauler Twins, etc. its a really good looking buck imo. Great stuff as usual boss
Great video. I've been looking forward to this one. Hulk and Spiderman are my two favorite marvel characters, so Titan immediately appealed to me. I really love the massive dudes. Also, you gotta get that Marvel Select Immortal Hulk. He's easily the best Hulk on the market, and you can't beat it for $30.
you can make Tyrone Cash or the hulked out versions of Nick Fury, Blade, Rhodes,Punisher and Hawkeye during that one time they used a hulk serum during the Avengers vs New Ultimates against Tony's brother
The easy pop offs and disassembly is def a feature for customizers. Boiling and popping constantly is annoying, and you cant do that on something youve paint.
One thing bugs me, the shoulder to bicep breakup of the sculpt. Also, using the Marvel Legends style of ab crunch, would much preferred the McFarlane ball jointed approach.
Awesome. A custom titan body. Hope they can make more body types in the future. Short body like a Dwarf, a big muscle fat body like E-honda from street fighter. We Normally see a normal body size customs like s.h. body_kun
Has anyone else suggested a custom Rick from the 2010 version of Splatterhouse? Because I think this could really work for him, especially with that cleaver
I wonder how a custom super venom would work on that bod...hmm Also the grinning head would make a great neutral head for shadow king if painted and given glasses, a turban and a moustache
Someone should customise them into the “Mauler twins” from “Invincible”
Um I can’t see your pfp or your name for some reason????
now thats a good idea
That just popped out of my mind I'm gonna buy these guys and paint them as the mauler twins
That grinning head would ROCK for an Immortal Hulk custom.
Add the chin to that and purple and you have Thanos.
It's a perfect Salomon Grundy!
Brown would be good to make a Clayface, grey would be best for Solomon Grundy!
Could be a good Joe fixit as well
@@luidgiudine8633 or hulk
I only have 3 gripes from what I see
1. They need to make the joints tighter!
2.Butterfly joint could be better.
3. The shoulders way to small when you flexed biceps you notice it and it looks bad. They could've made shoulders bigger to fit proportion and it wouldn't have hindered articulation.
Other than that figure looks so much fun! Can't wait to have one.
The joint issue is because they were MEANT to be customized. The joint were apparently designed to factor in additional paint or sculpt work. I agree that the shoulder to bicep area is way off when you rotate it. The butterfly looks like it's hitting the sides of the pectoral muscle sculpt, so some light sanding there might increase the range.
@@TheSalemCrow the problems that as we see, sometimes the joints move just cause of SCIENCE, and while great for customisation, means you have a much weaker figure. The only points I want tighter is the butterfly joint but others could be tweaked too
Exactly
Great points.
I wonder how if some of the heads would look good for Kingpin
I've never seen these before. The sculpt looks incredible.
Not too sure about the torso being straight up and down. Could do to be a bit more V shaped.
Thanks for the vid.🙂
I always enjoyed the big bruiser type like Big Jim from the mid-sixties. Hope they fix the wobbling problem in them. Thanks for sharing your treasure. Excellent review!
Some pretty cool custom sugestions, i would probably make a super strong madter roshi 😂😂😂😂😂
Why an ab crunch instead of a ball jointed diaphragm? I wish they would retire that technology across the board.
I pre-ordered the deluxe grey version from BBTS so hopefully I get mine in the next few weeks. I plan on using a couple of heads for the Hulk & a couple for Kingpin. For those of you that have Mr Hyde, these heads with the hair extensions would work great imo
This could work like the criminal scientist twin brothers from Invincible.
Been waiting for this to be reviewed for so long I love it gotta cop it
Those figures can be a dope Hulk figure !
I sometimes find that batteries can drain in cameras while not in use. To maintain charge maybe consider removing batteries it when not in use. If it's draining fast while in use, that may be another issue. Some camera can also use power aDapters (plug) for use in studio environments environments. Could be an option for you.
I like it but the biceps/triceps look a bit off - too big for the upper shoulder ball joint?
Shao Kahn, Hulk, Juggernaut, Goro, Thanos, Doomsday, Darkseid, Bane, a beefed up Spawn, Broly from Dragonball Z/Super, Hugo from Final Fight.. The list goes on... 👀 I love the way Choco Titan looks, man. Super dope, figure. 👍🏻👀
Kintaro too but that head would be perfect for a goro but the extra arms would be hard
@@boogiesbooney2515 Unless you're an expert modder. 👀👍🏻
@@DemBaddBonez true
Damn this figure would make a great custom darkshine from one punch man.
Yea, I pre-ordered 2 of these in flesh tones and some of the female sculpts with the hope of being able to try custom heads with clothes to get easy customs. Stellar looking bodies!
LESSS GOOOO HE USED KUUGA AS A COMPARISON WOOOO BABY THATS WHAT I HAVE BEEN WAITING FOR
they literally look like mark ruffalo hulk and comic kingpin at the same time
I have a blue Titan on order as I am building an evil Kree Avengers! Quite frankly, as is, it makes a good Kree Hulk! Don't think I even need to do any customizing. So, he will be the Powerhouse. I thought about a Green for a Skrull, but Green is too much like an actual Hulk.
To answer his question, yes, they are deliberately loose and easy to disassemble for ease of customization. I went over this in my own review of the, I'm not sure it was necessary to do what they did here, but it is as advertised.
Wow these are really cool. Never heard of em before? Thanks.
Good video, my only complaint is I can't decide who I'd wanna customize him into: Zodd, 2k12 Super Shredder, Mike Haggar, Rick from Splatterhouse, knightfall Bane, Mauler Twins, etc. its a really good looking buck imo. Great stuff as usual boss
Where did you get them? Kind find a SINGLE one anywhere
Amazing Nightfall Bane potential idea for a figure.
If I’m able to get one of these I’ll turn mine into TRYCOS “ Champion of the Universe” this body mold is dead on perfect!
These are awesome, I think the assembly allows for sculpting and paint work. The finished product will have the tighter joints👍🏽
I always miss out on cool kickstarters!
You're not alone
I believe this figure is still available on bigbadtoystore
I wonder why bulky figures are not given front butterfly joints. Just like the marvel legend hulks
Is there a figure in that line with a build like sueprman/heman?
Wish i had a choco-titan, would make an AMAZING Clayface
I’m getting mine customized as the Armored Titan from Attack on Titan. I hope the make a lean muscular body so I can do even more.
Great video. I've been looking forward to this one. Hulk and Spiderman are my two favorite marvel characters, so Titan immediately appealed to me. I really love the massive dudes.
Also, you gotta get that Marvel Select Immortal Hulk. He's easily the best Hulk on the market, and you can't beat it for $30.
That one hair sculpt with the smiling green head looks almost exactly like the Mcu hulk
thats exactly what i thought
Yeah I’ve seen this video a bunch of times and I’ve given that hair a nickname and I call it the ruffallo sculpt
If some one that makes clothes for their figs made a suit in scale for these , this could make a sick king pin
Yo where did you get the original pack I want this but idk where to buy it
great sculpts on these
you can make Tyrone Cash or the hulked out versions of Nick Fury, Blade, Rhodes,Punisher and Hawkeye during that one time they used a hulk serum during the Avengers vs New Ultimates against Tony's brother
So I got an email from bbts saying maven stopped production on the titan bodies and canceled my preorder): and there's no news or anything about it
The easy pop offs and disassembly is def a feature for customizers. Boiling and popping constantly is annoying, and you cant do that on something youve paint.
That green body remembers me abomination from hulk i think it would be a nice custom
One thing bugs me, the shoulder to bicep breakup of the sculpt.
Also, using the Marvel Legends style of ab crunch, would much preferred the McFarlane ball jointed approach.
Does it come apart at the waist fairly well?
I think i use this as a base body for venom... such a shame they dont make one in a solid black...
Where can i get this figures ?
Where can we buy these and how much
Really wanted to see him next to some new storm stuff like Ares or death adder. Still awesome review I got a lot planned for this guy
Awesome. A custom titan body. Hope they can make more body types in the future. Short body like a Dwarf, a big muscle fat body like E-honda from street fighter.
We Normally see a normal body size customs like s.h. body_kun
I would have a custom figure contest .Show off your best custom of these figures.
I would make the THE BLOOD BROTHERS-MARVEL
The shoulders shoulda been sculpted big enough for the Bi's/Tri's to look more flush when posing. The gapping when posing the arms kills the sculpt.
The brown one looks like clayface made himself jacked. Also I always wanted a figure from the comic uber and these look like a good start.
I'm a make a champion of the universe with dis
You can make Garrosh Hellscream from that Brown titan.
These would make for an excellent custom Bane
The brown one looks good for a clay face
Brown would be a good Superalloy Darkshine from One Punch Man
you can use this as a base figure, puffy version
There should be a contest and dress it up to Hulk or Thanos or any numbersof giantfigures...
Damn that's a great figure & accessory pack. Great review
I could use these to customize actual titans for my vitruvian hacks line!
If this is the same hieght as the shf iw hulk(which i doubt)......it would be the perfect 2012 hulk custom
The head sculpt looks like Goro from mortal kombat
I have a pinky one and it is also really loose
Thanks for the review! I think you should substitute the word “taller” for “bigger” to be more accurate with your descriptions. Thanks again.
I would check on Amazon to get that Immortal hulk like 27 bucks
14:34 Add a beard to that, and he's basically Maestro Hulk!
Has anyone else suggested a custom Rick from the 2010 version of Splatterhouse? Because I think this could really work for him, especially with that cleaver
You can get mr.x from resident evil from this
Im not sure if you said "Choco Titan" or "Chocolate Titan" but either way I died when I heard you call it that
You need lithium and rechargeable batteries for cameras. They drain regular batteries immediately.
Hey bud want you custom build a joe fix. 😉 I mean you have the right pieces to create one.
This would also make a good king thanos or thanos is general
this bodies are good for orc customs
Zod? When was zod built like that?
You can even make an all might figure
Make a cosmic hulk
How much is it
Inhaled Farts brought me here
The choclate one could be a golem with very little effort
That would all tighten with paint
Tusk or even Venom
The mauler twins 😄
I would make this to a custom mvc2 hulk or an escanor
Super Alloy DarkShine!!
I'd love to see someone use this for an mcu abomination :D
where can we buy one?
@joshua Kenney thanks a lot:DDDD
They both remind me of Thanos 😎
Makes me wanna make oni customs
How much it's cost?
Deluxe Grey version goes for $69.99 on BBTS & non deluxe versions go for $49.99.
😲 so cool
Wait.... I got cats! Explaint die cast thing! Lol is it cuz theyll push it over
I can see comic drax👍
He'd make a great base for a tyrant! Or Mr X
Nice
I wonder how a custom super venom would work on that bod...hmm
Also the grinning head would make a great neutral head for shadow king if painted and given glasses, a turban and a moustache
WOW. amazing.
Your audio was all over the place
One could makes a great hammer head from this
I think you need a mic tape to your collar. 🤷