I used to watch your android hacking and burpsuite videos but lost that google account now got this video in my recommendation excellent content im a fan
Did you install the dev build or the main release? I don't think that feature has been officially released yet, so it's only available on the dev build.
I would have a question if someone could help me. If you change firmware but had rfid and other stuff saved on your device, are does lost? Or can you like, remove the sd card, install new firmware and plug sd card back in to save them...?! 🤔
you can copy software from your device to a computer using an sd reader and just copy all of the info, but doing what you said could work too i believe
I did exactly what you said but the installation gives an error The installation stops, this error appears in the log and "updating" appears in the flipper. Is it correct? [RPC] (19) Storage Write @/ext/update/XFW-0052_09122023/radio.bin START [RPC] (19) Storage Write @/ext/update/XFW-0052_09122023/radio.bin SUCCESS [RPC] (20) Storage Write @/ext/update/XFW-0052_09122023/resources.tar START [UTL] Upload 7 entries @Ybeglef ERROR: Operation timeout (generic) [DEV] Full Update @Ybeglef ERROR: Operation timeout (generic) [RPC] (20) Storage Write @/ext/update/XFW-0052_09122023/resources.tar ERROR: Operation timeout (generic) [RPC] (25) Gui Stop VirtualDisplay START [RPC] (25) Gui Stop VirtualDisplay ERROR: Operation timeout (generic) [qt.qpa.mime] Retrying to obtain clipboard.
I haven't seen that error before, but I found this post where someone had a similar issue. forum.flipper.net/t/firmware-upgrade-fails-resources-tar-error-operation-timeout/20983 Someone suggested that it might be an issue with the cable. The person who posted it also said that it worked after rebooting. So maybe try rebooting, and if it still doesn't work try a different cable.
when the ble spams a phone. will it interrupt someone talking on speaker of interrupt the video coming from there speaker? So you can shut down people using phone with no earbuds
I haven't tested that specific case, so I'm not 100% sure. I don't think it would on most phones though since it would only be requesting to pair a device and not actually pairing it. I think it would probably interrupt the call on iOS 17 though since it completely locks up the phone.
the discord wont give me full access I've verified and read the rules and still nothing. i messaged one of the people but no luck. Anyone having the same problem?
If you update the default from where does that overwrite all the other firmware that you’ve downloaded and placed on the Flipper zero? Like does it set it back to factory default and have to start over with all the other stuff?
I have read about people dual booting multiple firmwares on the same SD card, but I haven't tried it myself yet. If I ever get it to work, I'll probably make a video about it.
Unless you are actively using Bluetooth you should turn it off.. why do 99% of people think well I gotta leave it on because its more convenient to do that.. I can assure you, it's not all that much more convenient to leave it on. Battery drain, vulnerabilities, no thank you. Same with wifi, if your not using it just turn it off for crying out loud. Everyone wonders how I can just leave my phone around and forget it, come back 3 days later and it's got over 10% battery left... and the answer is because im not suckin juice like a child.
@@DTAGAFFA most people turn it off anyway? Uhm 10 out of 10 people I asked in person have told me they do not turn wifi or bluetooth on or off ever. Their phones had it enabled by default and they didnt mess with anything. Maybe thats just more common here in the midwest. I imagine west coast or east coast probably obsessed over turning that off more anyways.
This isn't hacking information into phones, it's just annoying people. Funny, but it's of no use to you.| Then you have to change your text as a title, to irritate people.
I tried to watch this, but that Valley Girl put-on grates worse than a fork dragged across a plate. Try dropping the uptalk gimmick so folks won't have to mute you.
Make a video of the same content. I don’t even know this guy but I’d like to see what content you produce. We’re in need of a master class. One thing that’s always been in this culture is being accepting of all who tinker. You don’t like the way he talks just don’t watch. The comments are unecessary.
I used to watch your android hacking and burpsuite videos but lost that google account now got this video in my recommendation excellent content im a fan
thanks! I'm glad you were able to find my channel again!
thank you man i just got mine for Christmas thank you for the guide
The new release is 53
From Feb 2 2024 bt doesn’t work to connect to my phone. How do we fix that
Hey Man , One Question
How we can control Android OS device using USB with flipper zero?
Do you have a PC to install the firmware?
1 question:
I had Xtreme installed in my FZ; somehow I couldn’t see "BLE Spam" under bluetooth.
Did you install the dev build or the main release? I don't think that feature has been officially released yet, so it's only available on the dev build.
@@CorSecure:
Is it called "Unleashed-firmware" now?
No. Unleashed is a different firmware. The BLE spam feature may be available on that firmware as well though. I haven't checked it recently.
I would have a question if someone could help me. If you change firmware but had rfid and other stuff saved on your device, are does lost? Or can you like, remove the sd card, install new firmware and plug sd card back in to save them...?! 🤔
you can copy software from your device to a computer using an sd reader and just copy all of the info, but doing what you said could work too i believe
I did exactly what you said but the installation gives an error
The installation stops, this error appears in the log and "updating" appears in the flipper. Is it correct?
[RPC] (19) Storage Write @/ext/update/XFW-0052_09122023/radio.bin START
[RPC] (19) Storage Write @/ext/update/XFW-0052_09122023/radio.bin SUCCESS
[RPC] (20) Storage Write @/ext/update/XFW-0052_09122023/resources.tar START
[UTL] Upload 7 entries @Ybeglef ERROR: Operation timeout (generic)
[DEV] Full Update @Ybeglef ERROR: Operation timeout (generic)
[RPC] (20) Storage Write @/ext/update/XFW-0052_09122023/resources.tar ERROR: Operation timeout (generic)
[RPC] (25) Gui Stop VirtualDisplay START
[RPC] (25) Gui Stop VirtualDisplay ERROR: Operation timeout (generic)
[qt.qpa.mime] Retrying to obtain clipboard.
I haven't seen that error before, but I found this post where someone had a similar issue.
forum.flipper.net/t/firmware-upgrade-fails-resources-tar-error-operation-timeout/20983
Someone suggested that it might be an issue with the cable. The person who posted it also said that it worked after rebooting. So maybe try rebooting, and if it still doesn't work try a different cable.
I managed to resolve this. Thanks. Apparently the problem was with the SD
Xtreme or unleashed ?
And which firmware to get for that ?
THANK YOU GREAT VIDEO SR WELL DONE PLEASE MORE
Is it ok to install it on the Cardputer M5StampS3?
when the ble spams a phone. will it interrupt someone talking on speaker of interrupt the video coming from there speaker? So you can shut down people using phone with no earbuds
I haven't tested that specific case, so I'm not 100% sure. I don't think it would on most phones though since it would only be requesting to pair a device and not actually pairing it. I think it would probably interrupt the call on iOS 17 though since it completely locks up the phone.
the discord wont give me full access I've verified and read the rules and still nothing. i messaged one of the people but no luck. Anyone having the same problem?
They don’t like you lol
If you update the default from where does that overwrite all the other firmware that you’ve downloaded and placed on the Flipper zero? Like does it set it back to factory default and have to start over with all the other stuff?
yes I believe so. I have read about people dual booting multiple firmwares on the same flipper so they keep everything, but I haven't tried that yet.
Ah thank you, good to know 🙏🏻
Does it force unlock a iPhone ?
why does everyone goto show ble spam first. its going to get blocked by apple bc of videos as such. we came to see updates
please make more videos about this, what else can you do?
Ble Spam doesn't show up after installing latest Xtreme firmware. Any ideas?
it's not in the official release yet. you have to get the dev build. I covered that in the video.
@@CorSecure Got it.. installed Dev build and good to go.
Is it ok to install it on the Cardputer M5StampS3?@@CorSecure
What do i do if it says unable to accept invite on the discord invite
Idk create a new acc
What discord doesn’t work
New subscriber here, great video. Thanks
thanks!
How do you do it in mobile app? 2:52
extreme is dead. so have a new phone hack build?
Still not patched 😂 was messing with my WiFi the other night 😂 however it doesn’t really lock it up but it just sends a bunch of annoying stuff
New subscriber. Good content.
thanks!
I believe you only have to turn off the bluetooth scanning on android.
That won't work,,,my girl gets mad when I'm testing it out ,,lol.her bt is off..which surprises me..
How do I get my self the role on discord?
just go to the reaction roles channel and click the dev updates button to give yourself the role
Wish u can put diff firmware on flipper,like 3 diff firmware at same time, haven't try this firmware but ,will see ,,good vid thanks..
I have read about people dual booting multiple firmwares on the same SD card, but I haven't tried it myself yet. If I ever get it to work, I'll probably make a video about it.
All I Hurd in this video was “ firmware “
Thanks.
What we need is one ROM. One ROM to find them all and in the darkness bind them.
The new version has also a spam for "s**toys" 😂
I want install my flipper zero
Unless you are actively using Bluetooth you should turn it off.. why do 99% of people think well I gotta leave it on because its more convenient to do that.. I can assure you, it's not all that much more convenient to leave it on. Battery drain, vulnerabilities, no thank you. Same with wifi, if your not using it just turn it off for crying out loud. Everyone wonders how I can just leave my phone around and forget it, come back 3 days later and it's got over 10% battery left... and the answer is because im not suckin juice like a child.
lets be honest most people turn them off anyway unless you are walking around with ear buds on you wont be able to be attacked by this feature
@@DTAGAFFA most people turn it off anyway? Uhm 10 out of 10 people I asked in person have told me they do not turn wifi or bluetooth on or off ever. Their phones had it enabled by default and they didnt mess with anything. Maybe thats just more common here in the midwest. I imagine west coast or east coast probably obsessed over turning that off more anyways.
Jesus Loves You
Runte Shore
Brown Matthew Wilson Ronald Brown Steven
This isn't hacking information into phones, it's just annoying people.
Funny, but it's of no use to you.|
Then you have to change your text as a title, to irritate people.
I tried to watch this, but that Valley Girl put-on grates worse than a fork dragged across a plate. Try dropping the uptalk gimmick so folks won't have to mute you.
Make a video of the same content. I don’t even know this guy but I’d like to see what content you produce. We’re in need of a master class. One thing that’s always been in this culture is being accepting of all who tinker. You don’t like the way he talks just don’t watch. The comments are unecessary.
Jesus someone has issues. Yikes.
Dude, your name is Randy and you're trying to give others grief.
That valley girl uptalk shit where everything sounds like a question is soo annoying. I’m glad someone else noticed it too. Talk like a man yo.
😂@@RoastBeefQueefSniffer