Это видео недоступно.
Сожалеем об этом.
What is MIVAN Construction | Advantages and Disadvantages | is Mivan Construction realty strong?
HTML-код
- Опубликовано: 20 ноя 2023
- Mivan Technology
What is MIVAN Construction | Advantages and Disadvantages | is Mivan Construction realty strong?
#Mivan #Shuttering #Aluminium #Formwork
Mivan technology has been used widely in Europe, Asia, Gulf Countries, and other parts of the globe. It is suitable for constructing a large number of houses in a short period of time using room size forms to construct walls and slabs in one constant pour on concrete.
Components of Mivan
Mivan Formwork components are divided based on the location of use:-
1)For Wall Components
Wall Panel, d) Rocker, c) Kickers, and d) Stub Pin
2) Beam Components
Beam Side Panel, b) Prop Head and panel for Soffit Beam
3) Deck Components
Deck Panels, b) Deck Prop and Prop Length, c) Soffit Length
Advantages
Mivan Formwork requires relatively less labor
Faster completion of floors
Lesser number of joints and reduced leakages
Smooth finishing of wall and slab
Low maintenance
More seismic resistance
Huge carpet area
Good quality construction work
Faster completion
No need for plastering
Disadvantages
Alignment maintenance needs skilled laborers
Initial setup takes time
It is expensive and used for typical floors only
It needs skilled labors for alignment maintenance
Construction joints should be set properly
Leakage issue like seepage, leakages during monsoon
Construction Technique
Assembling the reinforcement steel
Placement of aluminum form work
Pouring of concrete
Formwork:
Formwork is a mould for a structure. Into this mould, fresh concrete is poured to harden the concrete. The construction of formwork takes time and involves expenditure upto 20 to 25% of the total cost of the structure or even more. Design of these temporary structures are made to economic expenditure. The operation of removing the formwork is known as stripping. Stripped formwork can be reused. Reusable forms are known as panel forms and non-usable are called stationary forms.
Basic Knowledge About Mivan | Mivan Shuttering Procedure | Aluminium Formwork
Timber is the most common material used for formwork. The disadvantage with timber formwork is that it will warp, swell and shrink. To overcome these issues, MIVAN Formwork came into lame light there are many uses and even profits when compared with the timber formwork.
MIVAN ALUMINIUM FORMWORK:
Mivan is an aluminium formwork which is also called as MIVAN Shuttering. This type of formwork is first developed by a European construction company. In 1990, the Mivan Company Ltd. from Malaysia started manufacturing these formwork systems. Today, more than 30,000sqm of formwork from Mivan Co. Ltd. is used across the world. The MIVAN formwork has proven economical as well as satisfactory for the overall construction environment.
Basic Knowledge About Mivan | Mivan Shuttering Procedure | Aluminium Formwork
Mivan technology is mostly suitable for constructing large number of houses in a short span of time using room size forms to construct walls and slabs in one continuous pour on concrete.
Aluminum formwork is very cost effective for repetitive Building layouts and for above the plinth work. This system is very unique as all the components in a buildings, including slabs, beams, walls, columns, staircases, balconies and special window hood are of concrete and there is no need for block works or brick works.
Basic Knowledge About Mivan | Mivan Shuttering Procedure | Aluminium Formwork
Parts of MIVAN Formwork:-
It consists of four components Beam components, Deck components and wall components these all are made of high strength aluminium alloy. The modular nature of the Mivan aluminium formwork system allows easy assembling and removal of formwork. The construction can proceed speedily with very little deviation in dimensional tolerances. This System is quite flexible and can be easily adapted for any variations in the layout.