How to make a super bright LED light panel

Поделиться
HTML-код
  • Опубликовано: 30 окт 2024

Комментарии • 535

  • @Johnmicahtv
    @Johnmicahtv Год назад

    I love the zoom that helps to see the work well.

  • @brianbrewster6532
    @brianbrewster6532 4 года назад +1

    Your soldering skills and wiring are top notch. I feel as though I learned from the Master himself after watching this. Kudos. With this gush of brightness, I'd consider vent holes in your clear plexiglass housing to dissipate heat. And use nylon washers to avoid cracking this notoriously fragile clear plexi sheets, and perhaps more of them on the perimeter. A Price List of components would be nice, too. How much for the dimmer, and that large array of 4-volt LEDs for instance? Good effort, though.

  • @jayantsharma2658
    @jayantsharma2658 5 лет назад +1

    Is led light m blue color ki mil jati he kya.. Muje mere fhish aquirium k liye chahiye

  • @manikandanganesh5952
    @manikandanganesh5952 2 года назад

    why is there flickering. lack of battery power?. and what is that u attached on the back side, is it a charging module or what

  • @achmadrofianto
    @achmadrofianto 3 года назад +1

    what modul u use?

    • @CreativeWorksHK
      @CreativeWorksHK  3 года назад +1

      ruclips.net/video/eq5KsCo23BE/видео.html

  • @nikhilkumar-ds2oj
    @nikhilkumar-ds2oj 6 лет назад +9

    What is the name of the device that is used on the backside of light.....
    And is adapter of 12 volt is plugged at last in that device?????

  • @ishaankoul3164
    @ishaankoul3164 2 года назад

    Ye approximately kitna lumen hoga?

  • @rizzupp
    @rizzupp 6 лет назад +29

    What about heat sink? Those leds can burn down ur wooden frame within half an hour

    • @rojinabegum3888
      @rojinabegum3888 6 лет назад

      X-D

    • @abusaad5231
      @abusaad5231 6 лет назад +4

      its 12v only. Low temperature. u dick head

    • @yasarbastawala28287
      @yasarbastawala28287 6 лет назад +1

      Yes ... Where is heat sink?

    • @Fmacian59
      @Fmacian59 5 лет назад +4

      @@abusaad5231 340 leds x 0,02 A = 6.8A (plus resistors)
      6.8 A x 12 V = 81 wats. Pvc+wood------>>> fireworks.🎇🎇🎆
      Where is heat sink?

    • @Shivkumar12222
      @Shivkumar12222 5 лет назад

      Anna vatiki kavalina meteriyal yakada dorukutae chepandi plz

  • @DY-rr7cx
    @DY-rr7cx 6 лет назад +5

    Thank you for your video!!! Could you tell me about the used all supplies???

  • @MuhammadUsman-lg4hi
    @MuhammadUsman-lg4hi 5 лет назад +1

    very good

  • @waylab867
    @waylab867 4 года назад +1

    it looks very powerful light

  • @Dhirenswain77
    @Dhirenswain77 5 лет назад +1

    What is the material/ board you used for case?

  • @dudhalvishal5778
    @dudhalvishal5778 6 лет назад

    Waw very nice videos

  • @NasimaAkter-cg4bp
    @NasimaAkter-cg4bp 6 лет назад

    Please tell me what is the cast of one plat of led strip.please.............................!

  • @luigifrancesco7958
    @luigifrancesco7958 5 лет назад +2

    Hi,are you a manufacturer for producing led light box?

  • @gaurishankarchandrakar7778
    @gaurishankarchandrakar7778 3 года назад +1

    How to cost in make for this system

  • @jayasankarsankar2527
    @jayasankarsankar2527 4 года назад +2

    Super exland led light setting.

  • @PavanKarnatakapu
    @PavanKarnatakapu Год назад

    Dude, why didnt you use a diffuser? It could have helped a better or even spread of light

  • @SantoshKumar-je1nk
    @SantoshKumar-je1nk 5 лет назад +1

    Sir wire kon sa use kiya ye jo round kiya hai

    • @CreativeWorksHK
      @CreativeWorksHK  4 года назад

      ruclips.net/video/mFQ3LUHSCo0/видео.html

  • @amtechnician2798
    @amtechnician2798 2 года назад

    Bord ki peche lagaya ho , name keya he

  • @kartrikpal
    @kartrikpal Год назад

    Heat sync?

  • @igeandrew3922
    @igeandrew3922 4 года назад +1

    Can you list the materials used

  • @1invag
    @1invag 4 года назад +1

    Where would one aquire a sheet of borad?

  • @rajibuk
    @rajibuk 4 года назад +1

    Are they 8520?

    • @abubakkarassad1443
      @abubakkarassad1443 3 года назад

      use your brain

    • @rajibuk
      @rajibuk 3 года назад

      @@abubakkarassad1443 if you had any you would answer the question

    • @abubakkarassad1443
      @abubakkarassad1443 3 года назад

      ​@@rajibuk asking for a number like 8520 doesn't make any question
      i think y o u r jealous jealous jealous so use your brain

    • @rajibuk
      @rajibuk 3 года назад

      @@abubakkarassad1443 8520 is a type of led!!!! Pls don't be foolish. Today you have learnt something. Tomorrow before commenting try to find out beforehand.

    • @rajibuk
      @rajibuk 3 года назад

      @@abubakkarassad1443 pls listen to Eisntein. He said
      "Genius has its limits, stupidity doesn't"

  • @daveanderson6323
    @daveanderson6323 4 года назад +2

    Wow! How long before is gets too hot for the plastic substrate?

  • @noeenriquez4106
    @noeenriquez4106 6 лет назад

    what glue is that

  • @hemangparmar8067
    @hemangparmar8067 6 лет назад +14

    Perfect soldering dude!!!

    • @CreativeWorksHK
      @CreativeWorksHK  6 лет назад

      Thanks for watching

    • @abusaad5231
      @abusaad5231 6 лет назад

      Super idea

    • @nikhilkumar-ds2oj
      @nikhilkumar-ds2oj 6 лет назад

      @@CreativeWorksHK
      What is the device used on the back of the light......
      Is a adapter of 12 volt has been pluggged in that unknown device at last ?????

  • @nikhilkumar-ds2oj
    @nikhilkumar-ds2oj 6 лет назад +1

    Is the device will not work if there will be less than 315 led?????

  • @ejphotography8925
    @ejphotography8925 5 лет назад

    What are the materials you used?

  • @skdaveskdave9798
    @skdaveskdave9798 6 лет назад +2

    i am unknown electronic recently purchased home focus 64 yellow led bulb now stop working by multi meter attached series wise bulb glows I wish take it out from aluminium plate Pls suggestion also give how to make circuit . in other plate

  • @bommanaharishrao6410
    @bommanaharishrao6410 2 года назад

    Please give link of LED light

  • @rainbowmedia1205
    @rainbowmedia1205 5 лет назад

    What is this in back side name please the set of back & how to buy this

  • @youtubewala6669
    @youtubewala6669 4 года назад +1

    Sir battery kon lagavoge plz tell me

  • @TheDarkTiamat2011
    @TheDarkTiamat2011 6 лет назад +3

    how much watt? what about cooling?

  • @waldenhouse
    @waldenhouse 5 лет назад +2

    Where can one obtain these light strips please?

  • @shubhamss4898
    @shubhamss4898 6 лет назад +1

    Kitne volt/Amp ka circuit use kiya h....btaye ?

  • @georgesfernandez5274
    @georgesfernandez5274 6 лет назад

    Bonjour pouvez vous me dire où je peux trouver ces plaques de leeds que vous utilisez l'adresse de votre fournisseur merci de m'aider
    Fernandez

    • @abusaad5231
      @abusaad5231 6 лет назад

      www.amazon.de/s/ref=nb_sb_ss_i_3_3/261-1882240-0015163?__mk_de_DE=ÅMÅŽÕÑ&url=search-alias%3Daps&field-keywords=led+strip&sprefix=led%2Caps%2C331&crid=YB9NY8EFHHIZ&rh=i%3Aaps%2Ck%3Aled+strip

  • @skidicp
    @skidicp 6 лет назад +1

    where did you get the leds from? LInk?

  • @xavoelectro8345
    @xavoelectro8345 6 лет назад +1

    It is better to cut a pole on each side of the strips, and so you can directly solder the voltage line

    • @abusaad5231
      @abusaad5231 6 лет назад

      heat heat heat do u know ..? i think u have lack of knowledge... of material

  • @blackbeast2009
    @blackbeast2009 5 лет назад +3

    Where you bought those led lights

  • @ajayakumarbs3316
    @ajayakumarbs3316 5 лет назад +1

    Nice.Use milnex paper at top.

  • @clearriver5987
    @clearriver5987 5 лет назад +3

    NICE DONE WHAT ABOUT HEAT

  • @JackJack-pp6ke
    @JackJack-pp6ke 6 лет назад +1

    Dear my friend.I am Jack from China.led one stop service in China.
    I think you can make a big aluminum pcb then assembly some 3030 osram LED chip.then assembly lens.
    If you need I can send some led board to you.

    • @tauseedansari723
      @tauseedansari723 6 лет назад

      bhai bol kr banaye kya kya use kya kitne bat ka hai

    • @abusaad5231
      @abusaad5231 6 лет назад

      r u in light business

    • @JackJack-pp6ke
      @JackJack-pp6ke 6 лет назад

      yes,jack@fast-pcba.com , any problem send mail to me。thanks

  • @jainaviralfulful
    @jainaviralfulful 6 лет назад

    Where to buy led strips

    • @abusaad5231
      @abusaad5231 6 лет назад

      captaan bazar 2nd floor

    • @jainaviralfulful
      @jainaviralfulful 6 лет назад

      abu saad52 online?

    • @abusaad5231
      @abusaad5231 6 лет назад

      @@jainaviralfulful www.amazon.in/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=led+strips

  • @leon9357
    @leon9357 5 лет назад

    So that was a copper wire? How could you solder them? copper doesn't catch solder.

    • @RollinDro420
      @RollinDro420 4 года назад

      Plumbers and electricians solder copper on a daily basis. Gotta use flux to make the solder stick.

  • @faizalkhan7455
    @faizalkhan7455 6 лет назад

    Us ke pche se Kya lagay Aap ne sar Zara jaldi batana pilz

  • @tiagozottis2828
    @tiagozottis2828 6 лет назад

    Onde se consegue essas barra de led?

  • @ajaikumarnadar5005
    @ajaikumarnadar5005 6 лет назад

    can i know from where did you buy the led strips ?

    • @jesus2639
      @jesus2639 5 лет назад

      www.ebay.com/i/263519572979?chn=ps&var=562549885485&ul_ref=https%253A%252F%252Frover.ebay.com%252Frover%252F1%252F711-117182-37290-0%252F2%253Fmpre%253Dhttps%25253A%25252F%25252Fwww.ebay.com%25252Fi%25252F263519572979%25253Fchn%25253Dps%252526var%25253D562549885485%2526itemid%253D562549885485_263519572979%2526targetid%253D313776934696%2526device%253Dm%2526adtype%253Dpla%2526googleloc%253D9012101%2526poi%253D%2526campaignid%253D1669934606%2526adgroupid%253D65058347459%2526rlsatarget%253Dpla-313776934696%2526abcId%253D1123856%2526merchantid%253D6296724%2526gclid%253DEAIaIQobChMI_9CggJCc4QIVAaeGCh1OWQm1EAkYASABEgLYhvD_BwE%2526srcrot%253D711-117182-37290-0%2526rvr_id%253D1908874029589%2526rvr_ts%253Db26f07a81690aad754c16f52ffdc7c1b
      These will work just as well as he used

  • @Funnymemes84093
    @Funnymemes84093 6 лет назад +4

    Must reply... Where can i buy this LED

  • @nikaccoandrew6188
    @nikaccoandrew6188 4 года назад +1

    я ленту последовательно спаивал 28 полосок отрезки 5см по 3 led сопротивление на каждом отрезке 39 Ом, виходило примерно при 240В в розетке 18Вт, через диодный мост и конденсатор 100мкф 400В, при комнатной температуре 27 гр., все это было наклеено на алюминиевый уголок 10*10*2 мм длина 150см, так оно грелось до 60 градусов

  • @sakshijeena7896
    @sakshijeena7896 5 лет назад +1

    Nice video bro

    • @CreativeWorksHK
      @CreativeWorksHK  4 года назад

      ruclips.net/video/mFQ3LUHSCo0/видео.html

  • @electric_mix
    @electric_mix 5 лет назад +1

    Very cool and the best

  • @Rock78993
    @Rock78993 5 лет назад +6

    Something problem Bec lights blinking so u put some more 3/4/5ahm adapter it will work properly

  • @AhsanCh36101
    @AhsanCh36101 4 года назад +1

    sir plz tell me hoe u have made a 220 to !@ volt circuit please sir i have tried many methods from u tube vidoes but in vain but sir please tell me how u have made

    • @CreativeWorksHK
      @CreativeWorksHK  3 года назад +1

      ruclips.net/video/eq5KsCo23BE/видео.html

  • @gunturchannel2211
    @gunturchannel2211 6 лет назад +4

    led input voltage is high, use 12v battery for good lighting

  • @rleon7245
    @rleon7245 4 года назад +1

    I don't get it, he connected all the negatives, what about the positive connections???? How can this work? Did I miss something?

  • @tarkazizkhan5428
    @tarkazizkhan5428 5 лет назад +1

    vai kothy poway jabe ai glass dhokhan name

  • @JLaudiovisual24
    @JLaudiovisual24 6 лет назад

    Donde estan el link. De los led ????

    • @abusaad5231
      @abusaad5231 6 лет назад

      www.amazon.in/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=led+strips

  • @SantoshKumar-je1nk
    @SantoshKumar-je1nk 5 лет назад +1

    Ye jo vedio banaya hai sir eisa he with battery wala banavo plz mere sare friends or mere request hai plz sir reply karna i am waiting sir

    • @CreativeWorksHK
      @CreativeWorksHK  4 года назад

      ruclips.net/video/mFQ3LUHSCo0/видео.html

  • @puneetsharma4458
    @puneetsharma4458 6 лет назад +3

    please provide me specification and upload the vedio in hindi step by step without background music reply me as soon as possible than

  • @Narendrakumar-up4kt
    @Narendrakumar-up4kt 6 лет назад +2

    Back me jo sercuit lagaaya wo kaisa sercuit tha?

    • @CreativeWorksHK
      @CreativeWorksHK  6 лет назад

      ruclips.net/video/Nw3WnZjzOmU/видео.html yea dekho mera vahy

  • @anjalichougule3541
    @anjalichougule3541 6 лет назад +1

    Esme konse vaylu ka driver he

  • @blaster2575
    @blaster2575 5 лет назад +2

    Pichawala circuit kaha milaga????

    • @CreativeWorksHK
      @CreativeWorksHK  5 лет назад

      online pa milaga , you search... LED dimmer circuit or pwm controller

    • @abusaad5231
      @abusaad5231 5 лет назад

      shame less..........

  • @AyaanKhan-hu3gg
    @AyaanKhan-hu3gg 5 лет назад +1

    Bro ye kitne wt ki hen???

  • @Z-Ack
    @Z-Ack 4 года назад +1

    You dont use a mattress? But have a head board for it? Hmm.. k..

  • @marshleesimao2938
    @marshleesimao2938 6 лет назад

    From where did you buy the led

  • @usamansari4706
    @usamansari4706 5 лет назад +3

    Ser Lid light kitne rupay ki milti hai

  • @leon9357
    @leon9357 6 лет назад +1

    What is that thick wire you used in your project?

  • @scrogathon
    @scrogathon 6 лет назад +5

    On a scale of 1 to I just burnt down my house how would you rate this?

    • @TheUnknownFATE
      @TheUnknownFATE 6 лет назад +1

      Valley mills Aquascaping id rated it a "my livingroom caught on fire but the fire fighters put it out b4 the whole house was up in flames"

    • @abusaad5231
      @abusaad5231 6 лет назад

      12v only. Low temperature

    • @abusaad5231
      @abusaad5231 6 лет назад

      its 12v only. Low temperature. u dick head

    • @abusaad5231
      @abusaad5231 6 лет назад

      @@TheUnknownFATE its 12v only. Low temperature. u dick head

  • @ayubazad9851
    @ayubazad9851 5 лет назад +17

    Your project is to good
    But your video is very poor.
    You should give all information of component which you use on it.
    There are many doubt in your video.
    So you should improve your video.

  • @rajeshtamboli8291
    @rajeshtamboli8291 4 года назад +1

    Lad strip(lad light plate) konse shop mai available hei

  • @abuthahirrandar3720
    @abuthahirrandar3720 6 лет назад +1

    What is that thing used in back side to connect

  • @asjadmehmood2411
    @asjadmehmood2411 5 лет назад +1

    دوست اگر آپ کی آواز بھی ساتھ ہوتی تو کیا ہی اچھا ہوتا یہ کتنے واٹ کا ہے اس کے پینل آپ نے اٹیچ کیے اور اس کا کنٹرولر آپ نے کیسے لگایا کنٹرولر آپ نے خود بنایا یا کہ یہ عام مارکیٹ میں دستیاب ہے پلیز اس کو زرا تفصیل سے بیان کریں شکریہ......
    آپ کی بنائی ہوئی لائٹ اچھی ہے.....

    • @abusaad5231
      @abusaad5231 5 лет назад

      If your voice was well, what would it be good to have, how many watts you have, its panchave you pulled down and how its controller you installed, the controller made you yourself or it was available in the general market. Describe detail please thank ......
      Your made light is good .....

    • @abusaad5231
      @abusaad5231 5 лет назад

      ruclips.net/video/mFQ3LUHSCo0/видео.html

  • @surekan6460
    @surekan6460 5 лет назад +1

    All are 3 LED set. there is no connection between other 3 LED sets.U can see the breakpoint between each setof 3 LEDS. Pls let me kw if I wrong?

  • @Meri_merinet_01
    @Meri_merinet_01 Год назад

    Isme ek fan bhi lagana tha 2 month me kharab ho jayega

  • @rajgaming1751
    @rajgaming1751 6 лет назад

    good

  • @WędkarzZPółnocy
    @WędkarzZPółnocy Год назад

    heat could finish leds earlier than cold :)

  • @SudhirKumar-oi4xm
    @SudhirKumar-oi4xm 4 года назад +1

    Wow😮😮😮

  • @AlarLill
    @AlarLill 6 лет назад

    ... but why solder + and - in the end of the strip if you only use + in one side and - in other side?

  • @mukulahmed2123
    @mukulahmed2123 5 лет назад +2

    How much price of this led

  • @rahuldev344
    @rahuldev344 6 лет назад

    yeah kitne watt leta hai

  • @surajdixit6943
    @surajdixit6943 5 лет назад +1

    Mughe apka vidio bahut acha lga mughe apka what's app no chahiye

  • @SomaElectricals
    @SomaElectricals 6 лет назад +8

    @ 4:14 which cutter is this... is this nail cutter,

  • @yamraj2858
    @yamraj2858 5 лет назад

    How to make this circut

  • @bhaibhai-qp6fh
    @bhaibhai-qp6fh 5 лет назад

    I cannot find this led.can you help

  • @axelus22
    @axelus22 6 лет назад +2

    Nice but useless on video proyects, cause so much flickering on the camera. You need a proper voltage regulator in order to speed up the current speed (Mghz) so the camera doesn't "see" the leds on/off cycle.

  • @hariharan-ug7oe
    @hariharan-ug7oe 5 лет назад +1

    12v is enough...?

  • @nirjarapriyadarshinimohant6420

    Bhai Aapne + ko toh joint nahin kiye ?

  • @harmanbajwa4958
    @harmanbajwa4958 6 лет назад

    Nice video

  • @addy.is.live1
    @addy.is.live1 5 лет назад +2

    Those who are thinking why light is flickering then this happening due to the camera there is no problem with the LEDs

  • @ayushanand6629
    @ayushanand6629 6 лет назад

    Nice amazing

  • @abdullahalrafi6371
    @abdullahalrafi6371 5 лет назад +2

    High cost but good .why it spark .low light 4 volt light is better than your panel light.

  • @sotal6009
    @sotal6009 6 лет назад +1

    Nice idea but Be careful pls , The basement must be aluminum or steel otherwise will causing fire

  • @mrineesh26
    @mrineesh26 6 лет назад

    Led volt 12 or 4 ?

  • @chandreshkhurana7471
    @chandreshkhurana7471 6 лет назад +1

    sr dc choke onlain mil jae ga

  • @arslanrauf220
    @arslanrauf220 5 лет назад +1

    Aoa Bro ya light without heatsink k 1 hours sy ziada nai chalny wali

  • @bhaktisoundandlightesagarh8448
    @bhaktisoundandlightesagarh8448 5 лет назад +1

    Sir is ke supply kese banai ha

    • @farhat8728
      @farhat8728 5 лет назад

      bad idea could cough fire......

  • @sunidams822
    @sunidams822 6 лет назад +1

    Bro is this current or battery

  • @DjRoCk2388
    @DjRoCk2388 6 лет назад

    Genial lo pondre en práctica😱

    • @farhat8728
      @farhat8728 5 лет назад

      bad idea could cough fire......

  • @josephbohme7917
    @josephbohme7917 6 лет назад +12

    is there all of a sudden no need for heat dissipation- the one single thing that usually causes failures. You have just made an insulated foam + paper container for an electric lighting system- swell= so any kid that burns their parents home down is now gonna have you to accept blame. This is not Creative Works - it is bad idea. Mubeen saw the negligence, as well as several others- if you do not edit or refill you are taking this video to a new level of liability 46,000 view you are a threat to homes everywhere.

    • @abusaad5231
      @abusaad5231 6 лет назад

      its 12v only. Low temperature. u dick head

    • @Acharya_Vishu
      @Acharya_Vishu 6 лет назад +3

      @@abusaad5231 Please note that these leds produce extreme heat when running. Whether it is 12V or 1V if there is no heat dissipation, the whole thing will burn out in about 2-3 hours of continuous lighting. Maybe in even less time

    • @abusaad5231
      @abusaad5231 6 лет назад

      @@Acharya_Vishu i think you have lack of material knowledge u meat hole it will bend not burn...
      see his video ruclips.net/video/SU8bCgCbFFE/видео.html

    • @abusaad5231
      @abusaad5231 6 лет назад

      @Ulf Zimmermann i think you have lack of material knowledge u meat hole it will bend not burn...
      see his video ruclips.net/video/SU8bCgCbFFE/видео.html

    • @NLMountainMan-me9rg
      @NLMountainMan-me9rg 5 лет назад

      I said the same thing. I'm a retired electronic tech. This is wrong on so many levels. Fire hazard !!!!!!