EVERY PROJECT you make gets more and more elegant! To me that's the height of engineering where the design complexity decreases while the performance increases. So well done. I love watching your creativity enhance with every device.
Awesome Maciej. Knocked it out of the park yet again! Great build 👍 I'm going to keep asking - please consider a juiced up electric go-kart build. You're just the man for the job!
Beautiful layout and nicely constructed. What would it take to build an off-road version; both wheels driven, articulated, sprung and damped and plenty of ground clearance.
Superb, I really like your precision while making things. It would be great if you can share the details of electrical components that you use in your project. That would help a lot for people who are making things from your inspiration.
stunning quality work...i find your videos inspiring...if you make a future video of this scooter, 1mm steel plate will strong enough and weigh much less, or 2mm Aluminium, though, you did not say what the belly plate is made from...if it is 3mm steel, it is more than strong enough, but adds to the weight, decreasing the distance...but it is all good, and your videos and work are great...😀
Hello! I have been following your channel for a long time and I enjoy watching electric scooters. I want to do the project you did in this video, but I couldn't come to a complete decision about the frame dimensions. I would appreciate it if you could share with us which frame sizes you used in this project.
Much as I enjoyed the part of the video I watched, I can't help but feel most people will not be able to copy it, as they lack the welding tools/skills and pipe bending machine etc. Personally, I would prefer something made from a lighter metal and perhaps the way forward for me is to modify an existing Al "passive" skateboard - easily and cheaply available.
@@asdfghjkl7507 At 4:50 you can see the design of the body - it does not take into account the tilt of the steering column and, when glued, directs the LEDs slightly upwards.
I took into account the tilt of the steering wheel! Look at the lamp at 4:52. The LEDs holes are at an angle, large enough to finally point the lighting down
Why 36v? I mean, more volt means more speed, and the 1kw motor can support it too. Also, I can see there is some free space to fit the extra battaries too (for 48v). I understand that you may not care about top speed and care only about torque, but then you should chose a dual motor instead, big motor in the rear wheel is recommended if you want high speeds
yes but if you dont need more top speed or more torque, you can have the benefits of a lighter scooter. 2 motors 2 ESC more battery the weight would increase a lot.
Question if it's max @ 38kmph how far it can go, how long it can be use sir and how long it can be charge before being full charge? Thank you if you ever notice my comment and get a reply 🥰🥰🥰
Can you help me? I want to upgrade a razor rx200 I tried direct 24v lipo through a relay and the stock motor was too weak I need to know what motor I need and controller please!?!
Наука
When can we see an BillofMaterials? Really interested in the battery,esc and motor suppliers.
WOW, this is the best el. scooter build I've seen to date. Very beautiful.
Thanks!
EVERY PROJECT you make gets more and more elegant! To me that's the height of engineering where the design complexity decreases while the performance increases. So well done. I love watching your creativity enhance with every device.
Thanks!
Jak zwykle super wykonanie. Trzymam kciuki za kolejne projekty.
The final result was phenomenal! it looked absolutely professional, great job!
Awesome Maciej. Knocked it out of the park yet again! Great build 👍
I'm going to keep asking - please consider a juiced up electric go-kart build. You're just the man for the job!
Thanks! I am currently working on a powerful steam engine. Maybe a steam go-kart or scooter? It would definitely be a one-of-a-kind construction!
@@maciejnowakprojects oh 100% yes! That will be amazing. I can't wait 👌🏻
Awesome, thanks for sharing this video. Hi from Melbourne Australia.
Beats the hell out of walking, excellent build. 👍👍👍
Yup; If you have the means the acquire a store bought scooter or the less likely option of someone building their own scooter...
Fantastic work, Maciej! Just brilliant! 😃
Stay safe there with your family! 🖖😊
This guy is infinitely superior to me. Like a magician. Bravo!
Fantastic work
Dude is a talented genius. Wow!!!
I'm always impressed.
great work! keep it up!
Very nice.... clean work...👍🏻👍🏻👍🏻
Beautiful layout and nicely constructed.
What would it take to build an off-road version; both wheels driven, articulated, sprung and damped and plenty of ground clearance.
Great build mate your a very talented young man love watching your projects well done 👍🦘🇦🇺
Very professional
Nice job 👍
I like these videos since it's more building and less talking. Most youtubers feel the need to talk over everything.
good job mister well done
very nice dude.. great to see what you can do with welding steel... im a welder myself but i didnt think about scooter frames from steel yet
Very impressive !!!!!!!!!!!!!!!!!!!!!!!!!
Excelente proyecto 👍👊👌
Beautiful work!! Please send one to the Czech Republic 😁😁
Very very beautiful, thanks for sharing my friend 👍👍👍👍👍👍🥰♥️
Superb, I really like your precision while making things. It would be great if you can share the details of electrical components that you use in your project. That would help a lot for people who are making things from your inspiration.
Very good
Nice video. Will be great to add the costs of materials used for building the scooter.
Maravilha parabéns meu caro amigo
Perfect
Love it ❤️🔥
Omg i just learned how to change break pads by myself and i tought i was ballin 😫
A front motor as well as rear would be interesting
I like it very much
Wirklich meisterhaft und das so easy gebaut
Відчувається як людина вкладає «душу» .Лови лайкос . Золоті у тебе руки
👍👍👍
Where did you learn to make all the things you do ? you are very talented .
Polak Potrafi 😃👍
EXCELENTE , BENDICIONES.
stunning quality work...i find your videos inspiring...if you make a future video of this scooter, 1mm steel plate will strong enough and weigh much less, or 2mm Aluminium, though, you did not say what the belly plate is made from...if it is 3mm steel, it is more than strong enough, but adds to the weight, decreasing the distance...but it is all good, and your videos and work are great...😀
⭐ ⭐ ⭐⭐⭐
✨Perfekt ✨
With a 60 volt battery and a controller you could reach speeds up to 90km/h. i have done it with 500w motor and 60v battery.
you should attempt to make one foldable
Amazing. How much time and cost did it take you to make the scooter
👍👍
👌🏻
Could you post links to all the parts even the small ones?
Ale jazda. Na prawde fajny projekt, świetnie wykonany. Ile by kosztowało kupic takiego? :)
This thing would survive Csar bomb.
great job, can you build from motorcycle engine with transmission
Make a foldable one with a carry case, then it'll be amazing
Trop fort
Hello! I have been following your channel for a long time and I enjoy watching electric scooters. I want to do the project you did in this video, but I couldn't come to a complete decision about the frame dimensions. I would appreciate it if you could share with us which frame sizes you used in this project.
next one use a 1000w 48v hub with a 62ah pack
Wow
Where do you get your steel supplies from?
🔥🔥🔥👍🏻
Can you please link everything. I would really appreciate it. Thank you ❤
Hi, nice project
Can you give me the reference of motor or a link to website ?
Czy buduje Pan te hulajnogi również na zamówienie? :)
Headtube, steertube(fork) n down pipe.. what diameter do you use bro?
Much as I enjoyed the part of the video I watched, I can't help but feel most people will not be able to copy it, as they lack the welding tools/skills and pipe bending machine etc. Personally, I would prefer something made from a lighter metal and perhaps the way forward for me is to modify an existing Al "passive" skateboard - easily and cheaply available.
Please include link for materials used
sir from where did u get the board to control the lighting and charging
Where do you get all the parts?
next project
selling parts of this
alloy handlebar
alloy frame
alloy rim
hydraulic brake
disk brake
motor
chain
etc.
I love scooters but can't rid them.
They have no shocks and all the bumps on the road get transferred to my spine.
Beautiful build nevertheless.
Everything is fine, but the front light, it seems to me, will still strongly blind oncoming people.
It's just over-exposing the camera.
@@asdfghjkl7507 At 4:50 you can see the design of the body - it does not take into account the tilt of the steering column and, when glued, directs the LEDs slightly upwards.
I took into account the tilt of the steering wheel! Look at the lamp at 4:52. The LEDs holes are at an angle, large enough to finally point the lighting down
@@OBN_RacerMan At 9:38 you can see how bright they are against the road. Really not that bright.
@@maciejnowakprojects I understood - it was just not very obvious from this angle.
What about the range?
Why 36v? I mean, more volt means more speed, and the 1kw motor can support it too.
Also, I can see there is some free space to fit the extra battaries too (for 48v).
I understand that you may not care about top speed and care only about torque, but then you should chose a dual motor instead, big motor in the rear wheel is recommended if you want high speeds
yes but if you dont need more top speed or more torque, you can have the benefits of a lighter scooter.
2 motors 2 ESC more battery the weight would increase a lot.
Those batteries were not new? They had weld marks on them and looked to be re shrink-wrapped
You are showing us what you can do but you provide no link to were we can buy parts. It is sad and it will also be good to tell us whats the range.
Could you please add the item list
🤔 - Interesting...
How much to make a scooter like this?
Is it possible to share sizes of PDFs like that it will help others.
Please provide links
Links of products please
Ile mniej więcej kosztuje Cię zrobienie takiej hulajnogi?
how do i get the plan?
Question if it's max @ 38kmph how far it can go, how long it can be use sir and how long it can be charge before being full charge? Thank you if you ever notice my comment and get a reply 🥰🥰🥰
whats the weight of it?
Sir what will be its range
Heavy?
How much does it cost?
Jest opcja pogadać na priv z panem?
How much would you charge to sell one to a customer?
So if I try to do some what are the things I will need please comment it dowe
Can you help me? I want to upgrade a razor rx200 I tried direct 24v lipo through a relay and the stock motor was too weak I need to know what motor I need and controller please!?!
Aku mau, belinya dimana bang?
Link of the motor
How much to have 1 built
Can I buy 😂
здається дуже важкий, можливо було б використовувати матеріал щось полегше... але все одно хороша річь ...
Maciej nowak can you build me one
Do you want to sell it?
I am from India.
Will you make for me?.
or send me component details
Temiz iş