Hydraulic brake install on the Doodlebug minibike / Top speed run
HTML-код
- Опубликовано: 2 окт 2024
- Hydraulic brake install on the Doodlebug minibike / Top speed run
Installed a hydraulic brake kit on the Doodlebug minibike. It took a total of about ten minutes to do the install. Did a top speed run to test the brakes?
Doodlebug minibike playlist - • Baja Racer/ Doodle Bug...
Instagram - Doubledown555black66
----------------------------------------------------------------------------------------------------
Parts used -
Hydraulic brake kit - www.amazon.com...
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Great upgrade
I need some street tires like those
I swapped my mechanical breaks for the hydrolic on my db30 and it was the best upgrade ever! With alot go u need alot of WOAH! 🛑
How does it compare when you think about how hard it is to pull the lever. I’m thinking it would be a good option for my daughters doodle bug if it’s easier for her to pull back she’s 9 and I’m in the process for removing the governor we got a header and a 19mm Mikuni style carburetor from eBay
I hope working with my mini was that smooth.
Why do my hydraulic brakes lock up ?
I wish I had cool neighbors like you instead of uptight crybabies who don't like my old junk😂
😂
Did the brakes come with the fluid in them already? Sorry if I asked you this I don't remember if I did or not?
The sound when you started it and let it idle made my soul smile man I miss mine so much I'm going on FB marketplace now
Hey, @Black66 I have a doodlebug and I bought the same brake but whenever I hit the brakes the caliper moves in such a way that the caliper itself (not just the pads) is getting chewed up real bad. Just wondering if you have any tips on how to stop the caliper from moving around since it has a system on it that makes it move.
I have the same problem
@@warzone7571 My issue was that the idle was set too high, so when I was rolling and hit the brake, the caliper was taking too much load, I turned my idle down to where the tire doesn't spin at all, then put one washer on each side of the mount between the frame and the mounting part of the caliper. Hope this helps, I spent months figuring this one out.
@@mythicalcircle you no what I figured that yesterday as well I thought maybe my will is spinning to much
@@mythicalcircle by any chance do you know the size of the axle from the front wheel on a doodlebug db30 I just upgraded to a go powersports suspension and axle in to short?
@@warzone7571 unfortunately, I am running with no suspension, and I don't know the size. Maybe measure it and try to get close?
when i installed mine it was to small i don’t know what to do i have a proxy earth
Black66. Good Video. Where Did You Get The Tires For The Doddlebug And What Size Are They
They are 6 inch ultimate street tires . I have a video coming out on them
@@Black66 Thank's I'll Be Watching
Arizona ?
I bought 2 of those brakes and they both broke within an hour of use DO NOT BUY
Check out the playlist for bikes to buy... ruclips.net/video/bAchgrp5AZ0/видео.html
Black66 where did you get those breaks? I'm trying to find some that work with a 212 and that's exactly what I need for my Baja racer minibike. Please send the link that would be greatly appreciated 👍😌
Links are in the description of the videos. Thanks for watching!
Wow, that thing flies lol. Can I ask you where you bought those tires?
Check out the doodlebug playlist for all the mods on this bike. I usually put the links for the parts used in the description of the videos. ruclips.net/video/141owDJWJgw/видео.html
Do u think that hydraulic brake caliper would bolt up to a ct100u?
I'm not sure. Even if it doesn't, it wouldn't be too hard to fabricate a bracket to make it fit.
Do you have old school drum
I just bought a hydraulic brake for my doodlebug. But i apparently bought the wrong one. The spacing for the mounting holes are off and it seems like there wouldnt be enough clearance between the brake and the tire if i did install it. Is there anyway i could make it work or will i need to buy a whole new brake?
If your willing to weld or add spacers you can pretty much get any brake to work. The link is in the description of the video for the brake I used. Check out the playlist on the channel for many more brake installs. ruclips.net/video/Qmoop0FkxOM/видео.html
@black66. Thanks! I dont have a welder. So I'd have to find someone who could weld a bracket on. But that's kind of the route im thinking of going, as i dont have much for money and dont want to have to buy a whole new brake if i dont have to
Slide pins kept coming loose on mine. Lock tighted them and they fell out completely.
Brakes are over rated anyway !
I used jb weld and it hasn't let go yet. You guys definitely see more heat on your slow downs but I'm on mine hard off and on......I still want dual pistons....😒
@@fatbuddycat Duel pistons would be sweet!! I’m super skinny lol 😂 That’s why I get away with one …for now
@@fatbuddycat the gy6 caliper is the way to go
@@tashatorrid that's what I've been told.
Hey could you give me the dimensions on the caliber bracket welded to the frame? I need to make one and have it welded. Thank you
Do you brake pads wear un evenly with this kit? Mine do because of the crappy floating caliper design
I have the same problem
same
What mounting bracket do you have on your bike? The one I used for my mechanical brakes don't fit the hydraulic
Love it, thank you my friend I've been looking for a bolt on upgrade for awhile. It's a bit annoying changing brake pads before refilling the fuel
sMooooth!!!!!!!
What do you all have done to that bike to get 60 mph
Check out the Doodlebug playlist for many engine and part combos with this bike. ruclips.net/video/141owDJWJgw/видео.html
Had a mini bike that went 90mph with the stock brake on it
Not sure why your taking pride in that lol it’s better to have quality than ehhh it does the job
What stand is that your bike was on?
I picked the stand up used. Not sure the make .
Do you happen to know the hole pattern messerment for the doodlebug breaks I bought 2 now and they won't fit. Going to buy my first hydrolic break kit for it and wanted to make sure it's the same as yours. Please try to answer my question I know your a busy man and stuff have a great day and God bless.
The link for the brake kit that I used is in the description of the video. Check out the Doodlebug playlist for more brake installs and part comparisons on the Doodlebug. ruclips.net/video/141owDJWJgw/видео.html
@@Black66 thanks man I'm going to get one ride on and be safe man!
@@Black66 thanks man.
@@Black66 did you have to put the break fluid in it or dose it come pre filled and blead already?
@@ShawnMurphy-hg8ib They are ready to go.
What kind of brake light will plug into this?
Check out the lighting video ruclips.net/video/75arrzEwOvc/видео.html
@@Black66 just checked out the video. I must say I had so many questions! You made it very easy. Thank you
I squeezed the break handle when it was in there and it won’t go back what do I do?
Very nice. I'll have to upgrade my 100cc Coleman with this mod. Great vid!
What's it hard to put on because I got a ct100u too looking do this set up
Did you have to bleed them ?
No. they come fully assembled.
what size bolt and nut is used for this i lost the original nut and bolt
Black 66 what’s your location ??
Great video have a question can the brake lever for the hydraulic kit be installed on the right grip side? Or is it a left grip install only? Thanks SB
Thanks! It's a left handed kit. You can get a right handed kit.
damn bro i sanded down my old db and it was that color under it. how impressive you haven't painted it yet
I painted it. Check out the Doodlebug playlist ruclips.net/video/SuBNz0jH5pU/видео.html
Can I use this one for my b100 mini bike?
Why skip the bleed?
The brake comes already blead ready to go. No need to bleed.
I just put a hydraulic disc brake on my MURRAY "Track 2", replaced the band-brake without any cutting or welding by making a bolt-on caliper bracket. NOT a 10-minute job but I ended up with total adjustability. The disc mounted where the drum was, used coupling nuts for stand-offs. Cost=$80
That sounds like a pretty nice addition!
You should build a street legal minibike
hydraulic brakes are night and day.. your doodles pretty quick whats ur engine build?
Tillotson 212 , 265 cam , 22lb springs , .010 head gasket , billet rod and flywheel , 24MM flat slide and header pipe . The build has changed over multiple videos . I’m always trying something new .
@@Black66 Nice sounds like a great build. I recently went from the 275 black mamba to a 308 dynocam, and love it. 308 sounds so much better at idle.
Have you heard of the Hooligan pull start indoor mini bike race?
No
@@Black66 check it out. I'm not sure how to share the link. But it's under that title.
@@igokarts4510 ok sweet! I’ll check it out
Man you trust those forks
What kind of a exhaust are your running? Or is it custom made it sounds amazing.
Thanks! That pipe does sound good . It’s an F&B pipe . You can get one directly from-their web site . I think go power sports has them too .
i need this were did he get the brakes🙏
Great install video and demo!
What size bolt do you need to
Will this fit on a mega moto 80
What bolts do you use?
Zippy tey zippy tie zippy toe !!
What type of dot3 or dot4 are you using sinthethic/glycol based or what?
My doodlebug has a Tillotson 212 with just an exhaust and I did the zip tie trick and adjusted the linkage to get it up to about 45mph. I ran the same disc and brake as you and it broke in half on me. Should I just be more gentle on the brakes or am I doing something wrong 😂
Does it come with brake fluid already in it?
Yes it does
What brand did you buy
did you custom make that break plate to connect it?
No,direct bolt on
wish i would have watched before i bought some that didn't fit
What kind of clutch you running on the tilly
It has a Max-Torque, but I have had a Noram Cheetah on it also. Check out this video ruclips.net/video/UjHi8-IPRy4/видео.html
Badass👌🏼
That's great! I have two bikes just like that and have the same brake kits yet to install on both of them. That was useful, thanks. You don't happen to recall what size bolts you mounted it with?
Thanks! I used the bolts off of the mechanical brake.
Can you post a link for the brakes? Im trying to find one that fits my Baja racer
Hey could you provide a link to a brake light that would work with this kit? That would plug into the switch on the handle..
OK.....cool !
Can you get a stinger clutch that helps with more miles per hour 💯
The quality on these brakes are absolute garbage they work good at 1st but longevity is terrible..
That is because the pads are small. Simply change out pads or go with a dual piston. Easy fix.
I've actually had problems with the guide pins bending under braking stress. I finally said to hell with it and got two piston Chinese atv caliper and master cylinder and made it work I now have a foot brake that is solid and will stop a mack truck..
@@ThePhatGuy1776 I hear Ya. I have did quite a few brake installs on the channel. These small padded brakes work pretty good for lite riders.
@@ThePhatGuy1776 The small padded brakes work good for lite weight riders. They are not designed for high speed riding or heavy riders. If you are not a smaller rider I wouldn't recommend them.
@@Black66 🤣 The average Chinese Mini bike usually has a weight limit of a 150 pounds. So I guess in China I am fat..🤷
Where can i get those tires?
Here is a link
www.ebay.com/itm/185367099049?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
Were can I purchase one
The links for the parts used in the video are in the description. Thanks for watching!
The garage is filling up !!!
I need to get rid of some of this stuff
@@Black66 no! It’s good stuff! Really all the different test platforms is a great part of your channel imho
Quick question I just bought a predator 212 hooked it up on my mini bike just like yours and when I turn it on the shaft is moving without touching the throttle trying to figure it out why
Could be idling to high
Definitely sounds like high idle also check your throttle cable
Can I have your old breaks?
Niceee÷e