Few people know this technique? The idea of joining 2 hoses without buying an adapter!
HTML-код
- Опубликовано: 29 сен 2024
- The Owner Of The Hardware Store Wouldn't Want You To Know This? An Idea To Join 2 Hoses Without Buying An Adapter - PVC Pipes
#plumber
#pipeline
#plumber
#pvc
#Water
#plumbing
#plumbing
#pipe
#plumbing
#plumbing
#tubodepvc
#works
#workfromhome
#carpentry
#carpenters
#emergency
![Yailin La Mas Viral, @kreizyk.official - Dale 2 (Remix) [Video Oficial]](http://i.ytimg.com/vi/JaYHBzgqz94/mqdefault.jpg)
Amazing that he had a NPS fitting in his toolbox. Probably cost a lot more than a plastic double male.
La NASA deberia contratarte carnal
Si de echo estoy escondido digo no me vayan a andar buscando jajaja ntc saludos mi amigo!
Not sure why you would ever need to connect 2 female couplings together, creative nonetheless.
I understand, thank you
what a cumbersome way to connect these 2 ends. Who has the materials to fabricate the solution shown?
You can repipe a house in that country with garden hoses pvc and a heat gun
How about using the other end and screw them together? You gotta be smarter than what you're working on.
Why do that when you already had an adapter 😂
Where ?
Only for a washing machine would you buy a male/male-ended hose.
Why not just buy an adaptor???
just buy an adapter
Tamaño de la tuerca ?
3/4
The other end is a male. Why all the theater.
A plastic double female hose thread connector bought from the hardware store is going to be cheaper, more reliable and take less time.
Ha. I could drive to and get back from Lowes in less time this video took, let alone the time that fabrication _actually_ took. But if I lived "out back" somewhere, it's a good trick to keep in mind.
@@MarkTubeG... You would still have to drive to a hardware store to buy a nut large enough to use as a mold.
A lot of work and need to have the tools and items - I rather buy an adapter if I need one. BUT - well done!
I guess it’s useful in those areas where there is a lack of adequate plumbing supplies!
If you have these things just laying around, you probably already have an adapter.
First off, if you're actually buying water hoses without a female coupler on one end, and a male coupler on the other end, then you have bigger issues than just needing a coupler! Second, this hack ONLY works if you have that type/size of PVC laying around, and the exact size nut you need to make the threads. If you don't have either of those, you will need to buy those items, thus negating the need to come up with the hack!
Thanks. You forgot the two orange washers!
You have hit the nail on the head.
These hackers assume/ presume that we all have these exact-fit items lying at home. This is NOT the case. So most of these hacks are NOT for the average DIY.
Exactly just go buy the adapter.
How about just replacing one of those female ends with a male end? Why do you have 2 female ends anyway?
Because otherwise this video would not be necessary then 😆
What's if he only got three female Then you got to do that It's just showing what you can do if you get into a problem
Since when is having 2 females a problem?
Can we even Call them/they female ends anymore!?! F*CK!
Then we couldn’t have male ends being transitioned to female ends and male ends to female ends! Get with the woke program dude… or dudette. (Sorry… I don’t know how you “self or gender” identity. No offense intended.)
Es mas facil comprar el niple en la ferretera que tener todos los materiales a la mano para realizar nuestro "niple casero"
Desde el punto de vista de una persona que no maneja herramientas, etc, si es complicado, pero para alguien que maneja herramientas por su trabajo, es una solución fácil y sencilla.
Ya metidos en gastos, mejor compras el conector macho para la manguera
I mean, it's a cool idea and all, but I think I can swing the .97 for the connector should I ever find myself in such a situation.
thank you very much, I understand you
This method requires a very specific set of circumstances.
1: you need to connect 2 female adapters. You have no other option.
2: You need to be in possesion of a nut with the correct thread.
3: You need to be in possesion of a plastic pipe with the correct diameter, made from a type of plastic that melt instead of burning to a crisp.
4: you need to have immediate access to a heat source that will heat the nut to a specific temperature.
If at all possible, I would just buy a quick connect set instead. I live in Denmark, so a set from Gardena (one that would only let water through when connected) would be the obvious choice...
Hi, interesting method of making an adapter, however in the U. S. Our hoses come with one male and one female end so such a coupler is not necessary.
oh thanks i understand
@@satbobsmith7261 If it is required and you already have one, you can do the other
Wrong threads per inch too!
Or maybe he just wants to connect 2 hoses to get extra length, however,,immnot sure about that method, I would have screwed in the pipe while holding the threaded part with the pliers to ensure its fully threaded
Now he has two male ends, so????????
Since each female coupling was added to the hoses aftermarket, just buy, and have on hand, a double male when you bought the females.
You still bought the pipe,brass fittings,natural gas,tools to use.think it would have easier to just get the adaptor
I, like many men, already have all those things in our garage.
Didn’t realize adapters were that expensive
They are cheap but this is a solution when you have no option to get it
@@Mrinventor93
OK, but who has a metal threaded bolt like that lying around?
@@justgivemethetruth If it would be the same problem, not having the adapter minus the threaded bolt
so that if I solved it very well I save gasoline plus traffic@@cjlaity1
Te tardas más que ir a comprarlo
Gracias
Better to close your mouth if you are unable to do so.
That's only if you can 'get to the shop' far faster than Superman 😂 😂
Estos tips son para personas que quieren solo agrandar el conocimiento pues nunca se sabe si vas a estar cerca de algun lugar para comprar o simplemente no vas a tener dinero asi que por favor los cracks que comentan incoerencias miren videos de power rangers.
Зачем изобретать Велосипед????🤭
"WOW'😲'MAN", GREAT IDEA 💡,
When I was a kid, I would fix
My G.I.Joe's or He-man Plastic
Toy's in a Similar💥Fashion.
`But', Thank You for Your Great
Idea. The Brain 🧠 Need's to be used at Time's, With Simple Fixe's as we seen here. Instead of Running back and forth couple of times to the hardware store.
Simple, But EFFECTIVE SOLUTIONS is what we all need. Once again
THANK YOU & MAY YOU ALL' HAVE A WONDERFUL NEW👍YEAR.
Thanks ☺️
Admire your ingenuity 👍 but I’m off to the garden centre to get the $1 proper connector 😂
Para aquellos "sabelotodo" que dicen "mejor voy a la ferretería y me ahorro tiempo" . Este video y muchos otros que he visto de este canal se me hacen excelentes, soy mujer y en el lugar donde vivo las ferreterías están lejos de mi casa. Me ha pasado que cuando necesito algo (algun imprevisto no deseable) siempre me pasa en domingo, y despues de las 6 pm y es cuando las ferreterías cercanas a mi casa estan cerradas. Estos trucos son excelentes cuando en ese momento quieres salir del apuro. En mi casa habia baja presión de agua y no podía lavar por que mi tinaco estaba vacío debido a la presión por lo que uni dos mangueras como en el video (con material que tenía), no igual pero me dio la idea y resultó, pude llenar mi lavadora, directamente con las mangueras de la toma de alimentación principal de agua. De lo contrario tendría que haberla llenado con cubetas (unas 5 o 6 cubetas mas otras 5 para enjuagar).
Igual soy un sabelotodo pero la manera mas sencilla es un trozo de tubo por dentro y dos abrazaderas.
Soooooo, instead of just buying the coupler, likely with included washers as well, for a few bux, you need to have:
-- a metal fitting of the exact size and thread,
-- a length of plastic pipe the exact right diameter,
-- a convenient gas stove to heat the fitting,
-- a utility knife to trim the finished pipe, etc., and
-- *still* need washers to prevent leaks.
Like, great, it can be done if you have all that stuff handy, but why bother?
I can just imagine someone walking into a supply store to buy the metal fitting, pipe, etc., and making a kludgey homebrew adapter, instead of just buying the exact perfectly-fitting adapter directly.
So instead of buying a 2 dollar plastic connecter you instead use 2 10 dollar bress connectors, a price of PVC that cost around 10 bucks and take about 30 minutes of time.... gotcha... -.-
I can't believe the number of commenters that think this makes sense!! Anyone with a brain would know there is absolutely NO TIME you would NEVER want to join 2 female ends together
Hi, interesting method of making an adapter, however in the U. S. Our hoses come with one male and one female end so such a coupler is not necessary.
good way! highly practical , applicable to temporary cases !😊
It's just easier to buy a female-male connector. Why go through all of that trouble for a $2.00 part?
This way can be applied to temporary cases ! you are so creative
Thank you
What a lot of trouble for something so simple - if you haven’t got a connector why would you have any of this other stuff - just lying around? Bit stupid really.
I don't get it. I can go to my local hardware store and purchase an adapter to join those two ends together. It was abt $1.50 last time I looked so probably $2.25 now.
Gracias por compartir tus videos, para mi lo que yo haría es comprar un conector macho sin necesidad de hacer tanto rollo
De nada, entiendo, gracias a ti por tomarte el tiempo de comentar
i would sooner go out and buy a host of different types of fittings, as some hackes are not as realiable as manufactured products. P.S. your drill bits should be standing upright, rather than in a pile for moisture to rust them out
If the adapter was designed well, why did something to change the way of function that was not necessary. Did the little connection device hard to find or it was far too expensive to buy it once for facilitate own consumption daily?
You connected to female ends together leaving two male ends. How could you hook it up to the spicket? This doesn't make any sense.
Awesome for the recyclable 3rd world countries… Home Depot and Lowe’s are forbidden…
Like always the KENT EXPERT don't get the concept of these videos He just showing you if you only got three female replacement what you can do
It is easy to understand, this video is to be able to create something if you don't have it nearby or you have a hard time getting it or simply to learn something new, this time we learned how to make a hose coupling
easiest way..1/2 pex..3/4 worm clamps 50 one ebay 10$...comprendo..
Demasiado complicado, el metodo es bueno y da resultado, pero si no tienes una rosca hembra ni un trozo de manguera y esa manguera es muy buena , pero tb cara, la verdad es mucho mas practico comprar la pieza de union q ya viene hecha y no gastas ni energia en calentar , solo enroscas , si acaso un poco de aislante y ya esta sobre las roscas
Perder tiempo valioso cuando un niple le cuesta menos,,, hay que estar pndjs
Total waste of time. I use a short piece of copper pipe, soften the hose ends with heat and push the ends over the copper. No fittings of any kind required.
How to join 2 hoses without spending an hour making an adapter... Buy an adapter.
Its called the amazing technique of turning one of the hoses around and using the freaking end with the female thread. Duh.
If an American plumber came to that country they would think an alien from an advanced civilization had landed
So spend .20 cents on an adapter or do more work than the 20 cents is worth. CHECK! waste of video
I can't imagine who would need to join two hoses with female ends. Hoses usually come with a male connector at one end and a female connector at the other. Turn the hose around!
Simplemente ponerle una union con doble rosaca y teflon.
Costs more for gas to heat the coupling than it does to buy the adapter.
It may be, but if the hardware store is a long distance away, gasoline can also cost much more, my friend.
@@Mrinventor93 It's not
Why are there two female ends? I have never seen a water hose where both ends have the same male or female ends except as an adapter to hook two faucets together to find a break in the or a bad leak when one faucet does not have water coming out of it or very little pressure.
Click bait, a trip to your local overpriced Ace would have got the same results.
Or, you could just turn one hose around as the other will fit just fine... DUH.
Of course, you just happen to have a metal coupler of the right size in your toolbox, instead of just the proper male part.
yes, thanks
Yes but the Ferrell was pipe tread not hose thread. Won't work
@@douglasgordon654 Exactly, two different threads. Ferrule thread is a fine thread where the hose thread is a coarse thread. Will not work. Also, the tube should have been threaded/twisted into the ferrule, not forced/pushed into the ferrule.
What a stroke of luck that he had a brass fitting that was exactly the same diameter and thread size as the black plastic ones on the ends of the hose 😀
That doesn't make any sense at all what you were going to end up with are two pieces of hose with male ends on each end that you can't connect to a faucet
Maybe just select the other end of the hose … the male end is on the other end??? Never seen a hose with a female connection on both ends???
Out Standing
Thanks
Llevo toda la mañana intentando encontralo por internet por favor si no te sabe mal me puedes dar una direccion de internet
Good idea if you have the parts lying about to make it,if not just as easy to buy the connector for under $1
Thanks
Of course most of us would have just purchased a male connector instead of a female one.
Ordered a new one from Amazon and it was delivered while I was watching this video :)
You sad sad man… Jesus you actually think that’s impressive
O.. M.. G...!
A Gas flame stove..👀
re..... Re...... REEEEEEEEEE.....
REEEEEEEEEEEE...EEEEE..!!!
😂😂😂😂😂😂😂😂😂
If I thought about that, I would consider myself a genius! Good job!
thank you my friend
This video has a few fails. 1st How many people have a broken end of a hose end in their junk pile?
2nd How many people have spare plastic pipes that they're using hanging around their house.
3rd What country has the same end hoses around their house.
3rd The two hoses that they're trying to connect together have been modified from their original origins.
4th The connectors that he pictured are relatively cheap and serve multi usage throught out it life time.
Thanks for the information friend 😥
Life must be hard in foreign, 3rd world countries
Why would u wanna connect female side with another female side????
Now ur gonna have male side on both ends. How are you gonna connect it on ur house water valve😂😂😂😂😂
It connected to the house, solutions to get out of trouble
The key is to have these pieces on hand, and a gas stove or a torch handy to heat up the metal nut enough to be able to melt a thread in to the PVC tubing. Nice and creative idea for sure!
If I didn't already have one, I would buy a 2" male-male 3/4" piece just like that for .25-.50 cents at the Restore down the street from me....just has to be the large threads version to work with the hose, most aren't because they're for interior fixtures hose and line connections....lol
En caso de no poder hacerlo, dónde y cuanto costaria ese adaptador?
All that messing on for the sake of a 50p connector 😂😂
My Mrs wouldn't be to impressed. Using her new stove to make something I don't need . Man there less than 50p at the local B&Q . I have quick release connections that come in a complete kit for a £1 at pound shop .FFS
Just go to the store and buy a 1/2" nipple.
When was this made? Back in the 30s? Gas stove has pilot lights in this generation
Also the gas he used cost more than an adapter
Well what if you don’t have the metal fitting or the scrap plastic pipe in the correct size. So it’s likely cheaper to buy the adapter if you need it.
The most likely thing is to buy the adapter but if you are far from the city you would have to drive to get them anyway, the idea is for if you have recycling at home
It looks like somebody put the wrong connector on one hose.
Why would you fit two female ends together???
La estafa de los tecnicos ?Hace dos dias se paro la lavadora .se llamo al tecnico por estar en garantia .el tecnico abre y mira algo en ella,cierra todo y dice que la averia es fuera de la lavadora y tiene que cobrar 107 euros por desplazamiento .dice que la averia esta en el tubo de desague .imposible porque es el mismo tubo del fregadero .
Es de aamsung el técnico ?
Un terminal macho y uno hembra en cada extremo de la manguera.
Lo hace más complicado. Los dos extremos de la manguera ya de por sí tienen adaptador
Personally I'd simply use the other end of the hose. The one that already has a male end on it.
right? :)
No vas a comprar un adaptador, pero si no tienes una tuerca de la medida no un pedazo de tubo, vas a tener que comprarlos...
En conclusión...
Mejor si compro el adaptador. 😅🤣😂
Real genius like myself if I was in that predicament what was wrong with the first coupling you showed..way too much time on your hands sir..let's get r done...ridiculous video man
Reparación de una manguera rota? Por fis
I’m going back to bed 🛏️. I cannot believe what I have just seen.😮😮😮😮😮😮😮😮😮😮😮
But, why would anyone ever need to do this?
I’ve never had a need to hook up hose backwards.
Aunque eso tal vez sirva para manguera rota 🙄
Más caro que comprarlo listo.
where I'm from, it's easier to buy the correct part than making one... coz most will not have the necessary material to make one anyways
Why would anyone want to join hoses like that?
I can still go to the store or turn the hose around
At least you have me an idea of how to directly connect PVC piping to a garden hose without having to buy a bunch of adapters and/or how to make a new PVC connector for a stripped one.
It would have been easier to just remove one of those hose ends and put those threads on the plain hose end exposed instead of making a double-ended piece.