I'm sure Hyundai will correct the "error" soon. There used to be a time when you could sign up for free to access the factory service information online. That's no longer the case.
It's not boring! It's not tedious! And you could simply fill the time telling a "YOU KNOW WHAT ROCCO DID TO ME LAST NIGHT" story, or a "YOU MAY NEED TO CYCLE THE KEY, OR TAP YOUR FOOT AND SAY I want to reprogram, I want to reprogram, I want to reprogram, TO GET IT TO GO FASTER" story.
The life of an auto tech, staring at a computer screen and watching a percentage bar.sorry about the cold Keith, I know it's not much fun being in the elements and not feeling 100%.🤧
Keith, 4 questions. 1. If a hyundai already has latest programming (calibration), would it pop up a message saying "Could not find valid reprogramming event!! This error occurred because pre-condition does not match...." 2. Can an Autel Maxisys Elite J2534 box work? 3. Will older version of the J2534HMA work when they have newer one out? 4. When the program is run, does it ask for a login authentication? Or just anyone can run it?
So basically Keith I just need to buy the j box and have a lap top and then buy subscriptions. Then I can do what u do?😉. Which lap top do I get? Heard u can't just get any one. U know better than I do. Also which j box would u recommend. Thank u and feel better. Hope rocco is doing fine and ur family
Will the vehicles automatically reprogram,fix glitches, etc once the vehicle has WiFi access in the future? Or will the manufacturers go the other way and require that all reprogramming must be completed at dealer.
No sir . It will not be limited to the dealer. And we are unsure of all the programming via 5g systems. It's possible but we dont have anything solid yet
@@NewLevelAuto Oh I must've missed it, thanks. Do you use that 70 amp for BMW's too? Don't they have the possibility of pulling 100 amps during a program?
lol, if it was up to me, I;d burn all the junktronics from all vehicles.... FORCING people to actually have and use their brain and pay attention to drive ;) manual transmission, carburetor, points, etc. was the OLD School anti drunken/druggy driving prevention......................................
I want to use your service. Where are you located? I have a hard time finding some "technical" mechanic. Or how do you title yourself? Any way you can send me your company website or somehow contact me?
I like to see the whole process through. Even if it takes long it gives you the reality of the flash and how long the process should take.👍
First Hyundai programming vid I've ever seen. Thanks again! 👍👍
Wow. We get to watch the Maestro work. Plus if your question isn’t to stupid, he will answer it for u.
Thanks for the info. Nice of them to leave out that important step!
That was painless. Thanks for the videos.
Thank you Keith. Good job. I appreciate your videos.
Always a great video and great job
Thanks for the video Sensei Keith!
Tommorow there is a update lol. Great Video goodnto know info
Can you program a Hyundai to be fun?
I'm sure Hyundai will correct the "error" soon. There used to be a time when you could sign up for free to access the factory service information online. That's no longer the case.
What is the tool used for programming
It's not boring! It's not tedious! And you could simply fill the time telling a "YOU KNOW WHAT ROCCO DID TO ME LAST NIGHT" story, or a "YOU MAY NEED TO CYCLE THE KEY, OR TAP YOUR FOOT AND SAY I want to reprogram, I want to reprogram, I want to reprogram, TO GET IT TO GO FASTER" story.
Did you hear about what Roc did to me last night?
New Level Auto...hahaha! Did he sneak one of your NEW SCAN TOOLS out to test it, to make sure it worked before you got into the field and needed it???
I'll let you know on the next programming 😜
Can the Autel Maixflash pro J2534 be used by Hyundai HMA? It is not listed on their supported device list..
Great question
The life of an auto tech, staring at a computer screen and watching a percentage bar.sorry about the cold Keith, I know it's not much fun being in the elements and not feeling 100%.🤧
The payment of the software to reprogram is only a payment and can you reprogram the times that you need?
So that software/application on your lap top.... how do you acquire it.... from the manufacture website?
That's correct
Michael Johnson eBay is called gds
Can you reset adaptive TCM learning values with a J2534 passthru for Hyundai, or do you need an official GDS?
where can i download the j2534?
Keith, 4 questions. 1. If a hyundai already has latest programming (calibration), would it pop up a message saying "Could not find valid reprogramming event!! This error occurred because pre-condition does not match...." 2. Can an Autel Maxisys Elite J2534 box work? 3. Will older version of the J2534HMA work when they have newer one out? 4. When the program is run, does it ask for a login authentication? Or just anyone can run it?
Same for me, you ever figure this out? Trying to program a new airbag module
So basically Keith I just need to buy the j box and have a lap top and then buy subscriptions. Then I can do what u do?😉. Which lap top do I get? Heard u can't just get any one. U know better than I do. Also which j box would u recommend. Thank u and feel better. Hope rocco is doing fine and ur family
Will the vehicles automatically reprogram,fix glitches, etc once the vehicle has WiFi access in the future? Or will the manufacturers go the other way and require that all reprogramming must be completed at dealer.
No sir . It will not be limited to the dealer. And we are unsure of all the programming via 5g systems. It's possible but we dont have anything solid yet
Dear is the programming free or not from Hyundai or you should pay yearly
Number 6👍
75$ no limit vin ?
What device you use for that ¡¡
Could you talk about what battery maintainer(s) you use for programming sometime?
Otc700a. I mentioned in earlier videos a few times.
@@NewLevelAuto Oh I must've missed it, thanks. Do you use that 70 amp for BMW's too? Don't they have the possibility of pulling 100 amps during a program?
Do you really handle 20 diags.a day???
20 vehicles. Sometimes 3 at once in one shop. The programmings are what slows me down. I wish it was all just diag 🤗
Hustling... thanks for taking us along for the ride....
@@NewLevelAuto We'll talk about that! If you are interested of course!
Always interested in hearing from you my friend
lol, if it was up to me, I;d burn all the junktronics from all vehicles.... FORCING people to actually have and use their brain and pay attention to drive ;)
manual transmission, carburetor, points, etc. was the OLD School anti drunken/druggy driving prevention......................................
is it just powertrain flashing or all modules like gm/ford chrysler
Powertrain only
First !!
Keith what was the DTC ?
P0456 apparently
@@NewLevelAuto
Is this DTC evaporative emission system leak!!
I want to use your service. Where are you located? I have a hard time finding some "technical" mechanic. Or how do you title yourself? Any way you can send me your company website or somehow contact me?
I'm in NYC , are you anywhere close?
Calfornia. San Francisco Bay Area. I could not find anyone like you here. I prefer not to go to Stealer.
I wouldn't say anything, Keith! Hyundai is liable to call you in to help reprogram their reprogramming, because of a NO CHARGE FAULT!!
🤣
😎
This is the Hyundai Programming Police! You are under arrest for taking advantage of our stupidity!
😇