Salut Super boulot , j'envisage de tester , tu utilises quoi comme colle liquide ? le coton pharma ou du coton filtre tabac pour associer les rocher ? Cdt
I made one but all I get is a little volcano spew at the sand Feeder hole and tiny amount of sand at the mouth of the sand water fall part what am I doing wrong .I put more support at the feed portion so that I don't get a water pressure loss at feed portion of pipe ..but still a problem
Maybe the pump is too weak or too strong. Waterfall too high can not. You should do the right sanding reed and I have full instructions on the channel.
What kind of glue is this that your using, also is that cotton that your using to connect the pieces? I’ve seen this done on several videos but can’t figure out the type of glue and material being used
Full instructions here, good luck: waterfallaquarium.weebly.com
🎉🎉🎉👌 beautiful
Beautifull job. Friend can you tell me what size is de sand you use for the sandfall? Thanks
I don't know the size but the sand grains are not too big or too small
Can i use flexible pipe, used for electrical work
That's fine, but the inside must be smooth so the sand moves smoothly
hi sir . i want to make my own too. what pump do you use.? thank you.
I use pump 18W 1000l/h
ok sir. ill try to find that . its power is enough to pump a water fall like you build.?
Cooler Sandwasserfall. Habe auch einen gemacht. Meiner verstopft immer, weil Schnecken in die Röhren gehen. Wie gehst du vor wenn alles verstopft ist?
Sie sollten Kupferdraht oder flexiblen Kunststoffdraht verwenden, um das Rohr zu reinigen
Sy klo bikin air terjun, koq pasir y malah mumbul kayak lapindo, knp kak ya, padahal teori y sdh benar...
Mungkin butiran pasirnya terlalu besar
Hi welchen kleber benutzt du denn?
Ich verwende Sekundenkleber
Which sand you use. Is it available online
I have an introduction to the sand I use on the channel
I didn’t even click on the video u til I seen him heat the pvc with that crack lighter 😂
Can you link the pump that you used to pump the sand?
I use a submersible pump, capacity 18W
Hola, enhorabuena por el trabajo. La arena donde la puedo conseguir?
También tengo problema con la T, revoca el agua hacia arriba.
Saludos
La letra T que pusiste deja 1/3 del espacio.
Hola, me puedes mandar el enlace para comprar la arena ?
Saludos
Kurze Frage.. welche Pumpe haben Sie Benutzen?!
Ich verwende eine 18-W-Tauchpumpe
Können Sie mir sagen welches Modell ist? Oder können Sie mir Link schicken, wo man diese Pumpe kaufen kann?
Christmas music in July LOL
Buen contenido Bro 👾
Gracias
Tres jolie
😊😊😊😊
Please give details about water pump. Like volt amp
Pump capacity 18w 1200l/h
@@RelaxLifeVIP is it available on Amazon...then please give link
Hi do you also sell some kind of work or design like this? 😊
Currently I do not have a store that sells products
@@RelaxLifeVIP ohh i see, but you also do thru online transaction?
Olá gostaria de saber a bombinha que é usada para fazer a cascata
Não entendo o que você quer dizer, você está perguntando sobre rochas vulcânicas?
Salut
Super boulot , j'envisage de tester , tu utilises quoi comme colle liquide ? le coton pharma ou du coton filtre tabac pour associer les rocher ?
Cdt
Le coton médical adhère très bien à la pierre
@@RelaxLifeVIP ah parfait , et pour la roche c'est quoi exactement ? vendu chez un particulier? merci
⭐️😊⭐️😊⭐️
😊😊😊😊😊
I made one but all I get is a little volcano spew at the sand Feeder hole and tiny amount of sand at the mouth of the sand water fall part what am I doing wrong .I put more support at the feed portion so that I don't get a water pressure loss at feed portion of pipe ..but still a problem
Maybe the pump is too weak or too strong. Waterfall too high can not. You should do the right sanding reed and I have full instructions on the channel.
I have the same issue! I have a adjustable pump on mine and I’ve tried it’s lowest setting and highest setting with no change.
When i start waterfall after 1-2 hr water look cloudy. I wash sand 5-6 times
You should wash the sand with soap and let it dry in the sun before using
@@RelaxLifeVIP i wash it 10-15 times
bang filter yang di gunakan ph berapa bang
Saya menggunakan filter barel, untuk air terjun saya menggunakan pompa 18w
Maaf tanya mass tinggi & lebar pipa berapa cm ya & pake pompa yg ukuran berapa liter/jam & merk apa
Tinggi pipa 22cm dan pompa 1000l/h dengan kapasitas 18w
Buat 3 input pasir kuat mass?
What kind of glue is this that your using, also is that cotton that your using to connect the pieces? I’ve seen this done on several videos but can’t figure out the type of glue and material being used
The glue I use is super glue, I use medical cotton to make the connection more secure
What time of glue and plastic sheets are you using please?
Use time can reach 4 years
ผมอยากรู้หินที่ใช้ทำ มันเป็นของจริงไหมครับ
หินที่ผมใช้คือหินลาวาสีดำ
Ph berapa in ya, ak bikin kok gak sempurna pake ph 1600
Pompa yang saya gunakan adalah 1000L/jam
Merk lem nya apa mass.. & belii di mana
Saya pakai lem super, dijual di toko furniture
Saya nyari di toko offline gak ada mass...online juga gak ada
Gak jadi subscribe tanya merk lem aja gak di jawab
Tanya merk kok lem super ha.... Lem super itu jenis bukan merk
Panjang pipa yg ukuran 27mm berapa cm mass
Tergantung lebar alirannya, biasanya 1 aliran saya pakai 11 atau 12 cm
Saya bikin tinggi 35 cm pake recent 1600/lh kok pasirnya berhamburan ya...pdhl 2 output di kerjakan semua
Tinggi pipa berapa CM& pake pompa yg ukuran berapa ya
Bút bi Thiên Long. Made in Vietnam 🥰
KAkaka tinh mắt đấy fen
07' and 31'' without real instructions and information about the final result... too bad
The water is passed 😢 from T
You should not make the waterfall too high or the pump too strong or too weak
Please 🙏 give a sandfall waterfall. I would be grateful to you