Stop Start Deactivation with DDT4ALL in the Renault Megane IV

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 231

  • @MicheleP
    @MicheleP  2 года назад +2

    ⚠⚠ NEW OBD 2 INTERFACE TO USE ⚠⚠
    Guys Important: USE THIS OBD 2 INTERFACE INSTEAD THAN THE ONE I MENTIONED IN VIDEOS. THEY “MODIFIED” IT AND NOW IT NO LONGER WORKS WITH DDT4ALL. USE THIS ONE, IT’S 100% OK 👉🏻 amzn.to/3UkIrdQ
    CHECK OUT THE FULL PLAYLIST OF DDT4ALL HACKS AND ACTIVATIONS FOR OUR RENAULT: ruclips.net/p/PL0_lM34jB4W-P_XvmnT1dxEKMvjcf8WKj

    • @alpman1144
      @alpman1144 2 года назад

      I bought the model you mentioned before. Is it correct that even reading with the dd4all is not possible?

    • @antim-andrei3279
      @antim-andrei3279 2 года назад

      Same. It arrived 5 minutes ago the first obd2 interface. There is no other solution for using this instead of the new one?

    • @MicheleP
      @MicheleP  2 года назад

      @@antim-andrei3279 unfortunately yes. I'm sorry guys but at the moment I made the video the first OBD worked great. The probably changed some internal chips. You can send back to Amazon and pick the new one

    • @alpman1144
      @alpman1144 2 года назад

      I got today the new type obd tool. It works. I have clio IV, for that I need to find the correct variables. But I could manage to disable the TPMS and seatbelt warning sound. Not the light. That is ok for me. Thanks Michele. Maybe one time a movie of some abrivations in ddt4all, explaination the ones you know.

    • @antim-andrei3279
      @antim-andrei3279 2 года назад

      @@MicheleP i got the new one. A little problem: i need to stay with the finger on the power button. If I let go all leds turn off. Do you know what is the problem?

  • @kawarinus
    @kawarinus 5 лет назад +16

    Hello Michele. I have switched off the start / stop system, switched on the cornering lights, switched off the video restriction, changed Km / Liters in the on-board computer and have the parking sensors visible in the dashboard. Thanks for the good videos.

    • @MicheleP
      @MicheleP  5 лет назад

      You’re welcome!

    • @Ycamasayer
      @Ycamasayer 3 месяца назад

      Without calculator problems ?

  • @K_Sadek
    @K_Sadek 4 года назад +3

    Can I change the start and stop setting so that it is controlled by the switch under the radio, but does not reset itself every trip?

  • @grtbgf
    @grtbgf 5 месяцев назад

    what other things can you code? Maybe enable scrolling through songs/radio stations while climate screen is on? And the peeping alarm when the car locks itself?

  • @andreaferrandes9662
    @andreaferrandes9662 5 лет назад

    Megane 1.5dci 09/2016 ha funzionato! Grazie x la guida!

    • @MicheleP
      @MicheleP  5 лет назад +1

      Grande, sono contento!!

  • @anthonysuckerman9432
    @anthonysuckerman9432 4 года назад +1

    Hello Michele could you Please give me a answer for my Renault Master 2017 settings if Possible.Thanks

  • @radugenis9698
    @radugenis9698 2 года назад

    Can you activate the blind spot warnin?
    I have parking ecu, all wiring and mirrors from a car that has the feature.

  • @andreipupaza38
    @andreipupaza38 Год назад

    Dear Michele, could you please let me know if these steps can be applied also to Kadjar model? I have the same interface and software like you. Thank you in advance

    • @MicheleP
      @MicheleP  Год назад +2

      yes! of course! no problema at all for your Kadjar! Just select the correct car at the beginning and you're done!

    • @andreipupaza38
      @andreipupaza38 Год назад

      @@MicheleP thank you for your reply and also for the tutorials related DDT4ALL, very useful information! All the best.

    • @andreipupaza38
      @andreipupaza38 Год назад

      @@MicheleP Now, I saw something that it concerns me related the ACTIVE EMERGENCY BRAKING. Could you please make a video and show us where to check if this is available on our cars? If the system works with front camera or with bumber radar and how can be tested? Thank you in advance

    • @MicheleP
      @MicheleP  Год назад

      @@andreipupaza38 i guess that on kadjar the AEBS is not available. The problem is that in the Kadjar you don't have the front radar under the renault logo (the distance from the vehicle behind is shown in the dashboard). If you don't have this rada you won't be able to have the AEBS

    • @andreipupaza38
      @andreipupaza38 Год назад

      @@MicheleP it is strange because couple of days ago I had the orange warning light on the dashboard showing two cars colliding with a message Active Braking disconnected. Rainy weather with mud.

  • @ivantozzi423
    @ivantozzi423 3 года назад

    Ciao Michele e complimenti per i tuoi video. Una volta disattivato lo start e stop e' possibile eliminare la notifica/spia sul quadro?

  • @GregTheGuitarist
    @GregTheGuitarist 25 дней назад

    Thank you so much. I will try this in my Clio IV. Hope it will help to save my battery and alternator as well 😅

  • @lucairondog5466
    @lucairondog5466 5 лет назад +1

    congratulations for your videos. In your opinion, is it possible to create a latency on the start & stop insertion time? I have a Megane with an automatic gearbox, so every time I stop, the engine stops. At intersections it's a little annoying, as the instructions for use and maintenance, you should touch on the brake pedal, but it isn't always possible. What do you say?

    • @MicheleP
      @MicheleP  5 лет назад

      i say that start and stop is bulllshit :) i mean, i hate it too, and i deactivated it permanently; unfortunately you are only able to do an on off, you can't modify latency (or i never saw a flag o cluster to change time)

  • @vincent7875
    @vincent7875 3 года назад

    Hello Michele, very good video thnak yopu.
    I have a question, is there a way to turn off the idle when in eco mode permanently?

    • @MicheleP
      @MicheleP  3 года назад

      Yep, in the DDT menu there’s a flag called “sailing in eco mode”

  • @robertobobby100
    @robertobobby100 Год назад

    Hola Michelle, me gustaría saber si sabes de algún programa para poner CarPlay pantalla completa en Megane pantalla vertical muchas gracias

  • @Marco80web
    @Marco80web Месяц назад

    Ciao Michele ho acquistato il dispositivo OBD2 e installato su pc ddt4all: a me compare dappertutto NODATA, nel corso di questi anni ci sono state delle variazioni? la mia auto è una Megane IV serie di fine 2020. dovrebbe funzionare oppure non è più possibile?

  • @stasvikeshin7766
    @stasvikeshin7766 Год назад

    Hello
    I have a question
    I had Megane 4 2018, I programmatically disabled the start stop
    now I bought a megane 4 2023 and the ecu does not respond to shutdown start stop commands and other data changes.
    after saving the changes, all parameters are returned to stock
    Maybe new models have some kind of protection?

  • @gabbodj10
    @gabbodj10 3 года назад

    Facendo così sarebbe permanentemente spento o normalmente spento e al tocco del pulsante si riattiverebbe?

  • @alessandrobottalico810
    @alessandrobottalico810 11 месяцев назад

    Ciao Michele,
    oggi ho provato a disattivare lo S&S ma nella pagina dove c'è il bit da cambiare ho tutto in rosso con NO DATA. Utilizzo l'adattatore da te consigliato nel tuo commento posto in primo piano. Per quanto riguarda la lettura dei km effettivi dell'auto tramite centralina ABS così come tutti i valori visualizzabili in marcia, nessun problema funziona tutto perfettamente come da tuoi video. La mia è una Mégane Sporter del 2019.
    Grazie
    Alessandro

  • @adylol162005
    @adylol162005 5 лет назад +2

    Why dont u config the cluster so u dont have that start and stop light allways on in it?

    • @MicheleP
      @MicheleP  5 лет назад +2

      Because that light is not annoying me 😂

    • @adylol162005
      @adylol162005 5 лет назад

      Michele Predieri 😂.i also have this mod on my Clio 4 Rs Trophy but also disabled light in cluster.

    • @MicheleP
      @MicheleP  5 лет назад

      How’s the trophy? I bet it’s bloody quick!

    • @adylol162005
      @adylol162005 5 лет назад

      Michele Predieri its great! Also the edc gearbox makes it even more fun to drive!

    • @adylol162005
      @adylol162005 5 лет назад

      Tadas Balasaitis u need ddt4all . Then go to cluster. Its easy

  • @DannySardo1
    @DannySardo1 Год назад

    Ciao Michele. Do you know where I can find the "new" codes for the Megane phase 2? The names for the ECU's in my car (12-2021) are different from the ones you mention

    • @MicheleP
      @MicheleP  Год назад

      maybe different names, but same working path

    • @DannySardo1
      @DannySardo1 Год назад

      @MicheleP that may be so. But if you mention ECU 1.2 for example and my car shows only AB1 how do I know which to choose

  • @NevilleBaker-u7l
    @NevilleBaker-u7l Год назад

    How do you download the 'yellow' shortcut engine logo on windows to apply the adjustment

  • @peterr6761
    @peterr6761 4 года назад

    Hello! Can I turn off the start / stop green pictogram on the display? I don't want to be there after deactivating in ddt4all.

  • @Columbariusify
    @Columbariusify 3 года назад

    Very nice! Is it same procedure for Dacia Duster II ?

  • @qlimaxseeunextyear
    @qlimaxseeunextyear 4 года назад

    Dear Michele !!! first of all bug fan of your videos. now...I have a renault espace v and i saw on internet you can buy head up display and a rear view camera. i know functions are not in the menu so i ask can you activate them on ddt4all after i install them? plz let me know and keep up the good work !!!

  • @luigirossi3231
    @luigirossi3231 3 года назад

    Ciao Michele non sono riuscito a modificare la velocità dei tergi dato che ho un grand scenic IV con settaggi di fabbrica penosi. Ma purtroppo un valore non lo sovrascrive. Ci sarebbero delle soluzioni??? Se vuoi in pvt ti spiego tutto meglio nel dettaglio. Grazie anticipatamente

  • @alemtalic5535
    @alemtalic5535 Год назад

    Hello Michele !
    I followed the exact same procedure ( except car select, I have Megane 4 Sedane ) , I double checked, the values did go from 0 to 1, but START/STOP remains same... When I press the phisical button, the STARTSTOP is OFF, and when its not pressed, its ON ...

    • @davutcrak
      @davutcrak Год назад

      do you have solution for this,I have same issue

    • @alemtalic5535
      @alemtalic5535 Год назад

      @@davutcrak yes, when I wrote that comment, I also had a problem, steering wheel started locking as soon as u turn the engine off, 100% of the times, no exception, regardless of steer wheel position...
      So I went to revert changes, and tried again, all the same. And it just " worked " but, dont touch the button, turn the engine on, put it out of gear, and just raise the handbrake.
      After a few moments, a green crossed "A" will appear, letting u know that the start stop is off . If you press the button, it will say that it is "OFF" now, but it will actually be "ON"

  • @josephine2639
    @josephine2639 Месяц назад

    Hi, would this work on a 2017 renault kangoo 1.5dci?

  • @mtsoworld
    @mtsoworld 4 года назад +1

    Hi man thanks for your all tutorial videos.
    Is it possible to activate Start Stop with just the using button after DDT4ALL editing? I mean the car always start unactivated startstop after I press button its start working?

  • @vicentejaimeolmedovelazque5727
    @vicentejaimeolmedovelazque5727 11 месяцев назад

    hola buenos dias se puede desactivar el aviso de star&stop desactivado gracias

  • @tanitab2
    @tanitab2 5 лет назад

    Ciao Michele, complimenti per il canale e per le guide. Ho provato questa guida sulla mia Megane 4 che ho ritirato questo mese 10/2019 ma dopo che disattivo lo S&S da DDT4ALL faccio un pezzo di strada e mi fermo, spengo l'auto riaccendo e riparto ma lo S&S si inserisce di nuovo. ti e' capitato anche a te per caso? Grazie

    • @MicheleP
      @MicheleP  5 лет назад

      ti consilgio di: vedere che la modifica sia stata effettivamente fatta.. dai un occhiata a DDT4ALL e assicurati che il parametro modificato venga letto correttamente. nel caso prova a rifare la modifica e prima di avviare l'auto chiudila a chiave per una decina di minuti, in modo che tutte le centraline si "addormentino". Quando la vai a riaprire le centraline ripartono "da zero" e dovrebbero acquisire il nuovo valore. a volte capita che le centraline non si spengano del tutto e tengano comunque in memoria il valore precedente

    • @tanitab2
      @tanitab2 5 лет назад

      @@MicheleP Perfetto, grazie. Ho eseguito di nuovo la procedura ed ora funziona correttamente. Mi domando cosa può succedere se premo sulla plancia il pulsante fisico di S&S? Si riattiva o rimane sempre disattivato? Grazie di nuovo

    • @MicheleP
      @MicheleP  5 лет назад +1

      @@tanitab2 non succede assolutamente nulla 👍🏻

  • @karledenvann6354
    @karledenvann6354 Месяц назад

    The latest videos i seen, they use a modified obd2 cable with 4pins switched. is this needed for any of your modifications on a Renault Espace V 2016?
    Best regards!

    • @MicheleP
      @MicheleP  29 дней назад

      THE pin switch is for entering some specific ecus. For “normal” mods you don’t need a modified pin obd

    • @karledenvann6354
      @karledenvann6354 29 дней назад

      Great! Thank you! i start without and see how far i will go. Most often i test things to the breaking point "till i break it 😂" then get stressed and works out a solution most often. You dont know if you dont try :) ​@@MicheleP

    • @karledenvann6354
      @karledenvann6354 25 дней назад

      @@MicheleP Can you Please help with one more question :) I get mixed answers from internet and my Renault shop. I have 2016 Espace and 2.2.19.300, can i safetly "understand at my own risk" install 3.3 from internet and will android auto work to activate from service menu then? Have a Great weekend! Best regards Karl

  • @MrJabichocu
    @MrJabichocu Год назад +1

    Hello, i have used this method on Captur I and stop-start is inhibited, but I have DTC 926755 on diagnosis (not on the cluster) anybody else has this error??

  • @EugeneHennessy
    @EugeneHennessy 4 года назад +1

    When i try to use dd4all on my megane 3 i keep getting "no data" in red, i have the same wifi connection as you have, any ideas why im getting no data?

  • @paolodrago806
    @paolodrago806 3 года назад

    E la disattivazione dello Start / Stop? Traduci Michele per favore

  • @מוטיפלצי
    @מוטיפלצי 4 года назад

    Hi, Thank you for the exalent video. Is there a way to open and close the side mirrors in 2016 Renault kadjar?

  • @cosmina8173
    @cosmina8173 4 года назад

    Ciao! Con ddt4all è possibile programmare una nuova chiave?

  • @giorgospapadopoulos1416
    @giorgospapadopoulos1416 4 месяца назад

    Hello, I got the message "Check SOS Call".
    I am trying to go through ddt4all in order to deactivate "Aux-In Info/Tel-Mute-Output" and "Virgin Configuration", but it doesn't work. I press the "Einstein" button in order to activate expert mode and change the values from "Activated" to "Deactivated", I press "Write activation status of DTC" and then "Key On/Off Reset" but nothing happens. If I refresh or close and reopen ddt4all both options are still "Activated".
    Also, in the "Read" right column, I can't see if an option is "Activated" or "Deactivated", they are all write "NO DATA".
    Do you know what do I have to do in order to be able to deactivate both options or if there is any other way to remove the error "Check SOS Call"?
    I would appreciate any kind of help.
    Thank you in advance.

  • @tinko975
    @tinko975 4 года назад

    very nice tutorial. i have older megane 3 with lights automatically turned on. it is called "scandinavian mode" , vhen i start engine, front and rear lights turns on and i cant turnt them off. how to deactivate that mode that i can turn off all lights manually? also i noticed instalation and bulbs for front daylight lights but those bulbs not working. how to activate thode daylight lights? thanks.

    • @MicheleP
      @MicheleP  4 года назад +1

      You have to search in the lights cluster a value called Scandinavian mode cf, it should be 1, you have to put 0

    • @tinko975
      @tinko975 4 года назад

      @@MicheleP thanks. Engine must running while doing this or just card inserted in place?

    • @MicheleP
      @MicheleP  4 года назад +1

      Card in place, with dash on 👍🏻

    • @tinko975
      @tinko975 4 года назад

      Michele Predieri thanks, then how to turn on DRL lights? I have bulbs and instalation, but bulbs are not working, should work when switch is turned in off position.. thanks in advance.

  • @anthonysuckerman9432
    @anthonysuckerman9432 4 года назад +1

    Hello Michele.I have a Renualt Master 2017.Can i do the same.

    • @szefu0
      @szefu0 3 года назад

      I would like to know myself but matey is not responding 😔

  • @brunolopes3865
    @brunolopes3865 Год назад

    is posible disable energy safe mode (not turn off usb ports) ?

  • @strahinjadjordjevic9361
    @strahinjadjordjevic9361 2 года назад

    Hey king, I got the same obd2 reader and ddt4all software but my wifi dongle won't connect with ddt4all. always trying to find the connection but won't find and connect. Can you please help me ?

  • @mariusking0
    @mariusking0 Год назад

    Hello , I have a question , I have a Kadjar 2016 , which one from the 3 from ddt4all should i use?

    • @jokso22
      @jokso22 Месяц назад

      I have Kadjar 2015, used first

  • @stefaneduard8169
    @stefaneduard8169 4 года назад

    Is it the same for the Dacia Logan 2 faze 2? I'm wondering this because it is owned by renault...

  • @MauroDiMauro82
    @MauroDiMauro82 2 года назад

    Ciao I tuoi video sono molto utili ma a me farebbe comodo che lo start & stop fosse disabilitato quando accendo la macchina ma che sia possibile abilitarlo con il tasto. in pratica l'esatto contrario di quello che succede di default. E' possibile?
    Grazie in anticipo

  • @rafadudek2613
    @rafadudek2613 2 года назад

    It worked on my 2017 Kadjar aswell

  • @motocalinnarcis
    @motocalinnarcis Год назад

    I don't like this method, I had it done like this but the start stop cannot start notification from board is crazing me. Try to deactivate it from Engine Control Module, one of the EDC17C84 lines, and go to start stop, help start stop configuration and change the 1st line to "Start Stop disabled for diagnostic tool". I said one of EDC17C84 beacause usually is working with 1st one, but in my case worked 2nd. With this proceedure no board notification is displayed, the led from start stop button start bright and cannot be actioned.

  • @ihammadb
    @ihammadb 4 года назад +1

    You saved my life bro 🌹🌹🌹🙏🙏🙏

  • @SilvioRodrigues-h5y
    @SilvioRodrigues-h5y 5 месяцев назад

    Extraordinary!! Thank you very much!

  • @alexshady31
    @alexshady31 5 месяцев назад

    After this i had dtc error. How the duck i switch to factory?

  • @RhinecnthusAssasi
    @RhinecnthusAssasi 2 года назад

    What about Megane IV 2019 GeandCoupe (Sedan) What to chose?

  • @enghaigoh5885
    @enghaigoh5885 5 лет назад +1

    Hi, thanks for the video. Do you have an Amazon link for this model of OBD2 adapter?

  • @vasilissideris4687
    @vasilissideris4687 Год назад

    Hi Michele, is this possible with Renault Clio IV dci 2017 ? Because in DDT4ALL i can't find the same command for start-stop deactivation in the menu for CLIO IV ...

  • @youssnouf
    @youssnouf Год назад

    hi is there a menu to desactivate the message "start stop problem"

  • @Dallco83
    @Dallco83 6 лет назад +1

    I am sure you can deactivate the stop start by pressing a button on the megane. Surely this is the same as doing it through the software ?

    • @MicheleP
      @MicheleP  6 лет назад +2

      yes, but by only pressing the button you have to do it every time you start the car, with this modify you write a value in the ECU, so it's permanent. you don't have to press the button every time

    • @JohnJohn-fn8qn
      @JohnJohn-fn8qn 5 лет назад

      Michele Predieri
      Does this also work on Captur 2016 ? My start stop is not working at all i want to get iT working again do i have to set the value to 0 to get iT working? And other question if its not working How can i remove the message from the dash? Everytime i get a message wich says start stop not working and its very annoying. Thanks for the great vid

    • @JohnJohn-fn8qn
      @JohnJohn-fn8qn 5 лет назад

      Michele Predieri
      sorry other question i see also on the web elm327 is this one better wich you have the Bluetooth device?

  • @KarimDK81
    @KarimDK81 2 года назад

    You are TOP bro!!!
    I have a question I have been in delvoper mode in my grandscenic 4. I did something stupid inside there then I get black screen. everything work fine the radio and touch on the screen but the screen is black I can't see anything 😅
    do you think I can fix this with ddt4all?

    • @MicheleP
      @MicheleP  2 года назад

      well... i think you have to go at dealership...

    • @KarimDK81
      @KarimDK81 2 года назад

      @@MicheleP have been 3 renault places they don't know how to do it 😅

  • @lianghao2352
    @lianghao2352 4 года назад

    Excuse me, ddt4all (KOLEOSII M5R) is there any way to activate cruise?

  • @peterr6761
    @peterr6761 4 года назад

    Hello! I wanted to turn the start stop system back on, but even though I reset the value to 0, the startstop doesn't work. What else to do? Please help!

    • @javierg.q.5546
      @javierg.q.5546 4 года назад

      I have the same problem. Could you help me?

    • @MicheleP
      @MicheleP  4 года назад +1

      You guys have to wait, it take some time to recalibrate, it could take even a week

    • @peterr6761
      @peterr6761 4 года назад

      @@MicheleP Thank You! :-)

  • @justinchan5797
    @justinchan5797 4 года назад

    Thanks for the video. Do you happen to know how to install google play app on rlink2?

  • @robertoromano1384
    @robertoromano1384 3 года назад

    Buona sera.dove posso scaricare il software grazie

  • @imseyd
    @imseyd 5 лет назад

    How can i enable eco mode in my clio 4 1.2 joy 2018 with ddt4all ? Thank you.

  • @lloydlow873
    @lloydlow873 2 года назад

    Hi bro, can this be used on Grand Scenic IV too?

  • @alansouza07
    @alansouza07 Месяц назад

    how to memorize the last choose after turn off vehicle ?

  • @samyrbutic6232
    @samyrbutic6232 2 года назад

    Non mi si collega obd come devo fare ?
    Ho una espace 5 serie e un pc w10

    • @MicheleP
      @MicheleP  2 года назад

      Probabilmente il nuovo standard che hanno implementato sulla OBD non la rende più compatibile con DDT4ALL. Ora consigliamo di usare questa, che funziona al 100%: amzn.to/3g770w5

  • @ibrahimetemcetinkaya
    @ibrahimetemcetinkaya 5 лет назад +1

    Stop-start nasıl aktiflestirebilirim

  • @milanmladenovic7654
    @milanmladenovic7654 3 года назад

    Dacia duster 1.6sce 84kw 115ks 2018g stop and start deactivation?

  • @dimyz7435
    @dimyz7435 3 года назад

    funziona anche con la nuova renault captur?

  • @francesconardellilippolis867
    @francesconardellilippolis867 2 года назад

    funziona anche con clio 4 2015?

  • @SPLaserworks
    @SPLaserworks 3 года назад

    Theres a a way to close the Windows when you lock the doors?

  • @kawarinus
    @kawarinus 5 лет назад

    Michele Some cars with a rain sensor can automatically close the roof when the rain sensor detects drops when the car is locked and the roof is open. Is this also possible with the Megane 4?

    • @MicheleP
      @MicheleP  5 лет назад

      unfortunately no, only talisman initiale paris have those sensors

    • @kawarinus
      @kawarinus 5 лет назад

      Okay too bad it's not an option. Thanks

  • @MoroboshiAtaru79
    @MoroboshiAtaru79 2 года назад

    Funziona su megane 3 2012?

  • @soldiers303
    @soldiers303 6 лет назад

    do you think it will work on megane 3? I have seen the settings for my car but when i disabled in in the uch it just says check start stop. But i want to remove it properly.

  • @heinng9385
    @heinng9385 4 года назад

    Hi, do you have video on how to activate Lane Departure Warning?

    • @MicheleP
      @MicheleP  4 года назад +1

      you need to have the front camera, if you have it you will find the relative option in drive assistant menu

    • @heinng9385
      @heinng9385 4 года назад

      @@MicheleP I can see the front camera inside a housing at top centre of wind screen, but LDW seems like disabled by Renault/ local car vendor. I understand from others, my car is hardware ready but was disabled because not included in sales package and only activated for more expensive version. If you have such video to activate LDW through DDT4ALL, please enlighten us.

  • @micsik6653
    @micsik6653 5 лет назад

    Hi Michele. After the changes I made in my Megane 4 GT (R-Sound and start-stop deactivation) in Multi Sense, the view of the vehicle on the Grand Scenic changed. Unfortunately, I can't change this graphic. I have a screenshot of what you see in ddt4all. Can you help me somehow?

    • @MicheleP
      @MicheleP  5 лет назад

      you have to change it with DDT4ALL, in radnav submenu

  • @miladinseratlic5984
    @miladinseratlic5984 3 года назад

    does it work on dacia sandero II (1.5dci) ?

  • @aarontan4430
    @aarontan4430 5 лет назад

    Hi! I have the the Kobra ODB2 with WiFi. I have loaded the ddt4all software on my Windows 10 notebook computer. I can connect to the ODB by WiFi and run the programme. I can select Megan IV Sedan (mine is sedan) and follow your steps. But when I try to double click the '... sailing_b4' then the software hangs and says 'not responding'. What do you think has gone wrong?

    • @MicheleP
      @MicheleP  5 лет назад

      hi, unfortunately that ECU is very "difficult" to read. probably your OBD is not fully compatible..try to buy the one i provided in the description, that is the only one FULLY compatible with Renault ECUs and DDT4ALL

    • @aarontan4430
      @aarontan4430 5 лет назад

      Thank you! I'll try other ways

  • @SAVYCAR1992
    @SAVYCAR1992 5 лет назад

    Salve, ma nel momento in cui imposti questo valore, il bottone del SeS smette di funzionare del tutto o premendolo si può riattivare lo SeS??

    • @MicheleP
      @MicheleP  5 лет назад

      nel momento in cui lo imposti è completamente disattivo, il pulsante non ha più funzione

    • @SAVYCAR1992
      @SAVYCAR1992 5 лет назад

      Ok, grazie della risposta!!

  • @frankcellini9363
    @frankcellini9363 5 лет назад

    Buongiorno Michele, I have tried to deactivate Stop/Start on my Clio RS 2017 and I got some advice from some Russian garage and they said to do the following...
    UPC-EMM
    T4_EMM_DDT2000
    EMM_AlternatorManagement - Configuration
    C-B_STOPSTARTInhibit, SET TO 1
    But when I get to second step I have many selections that start with "T4_EMM_DDT2000"... including T4_EMM_DDT2000_SW8_V2.1, T4_EMM_DDT2000_SW8.4_V1, T4_EMM_DDT2000_SW7_V1.2.5, T4_EMM_DDT2000_SW8.5_V1.1, T4_EMM_DDT2000_SW6_V3_1_3, T4_EMM_DDT2000_SW5_V2_4
    So I don't know which one to select... do you know what to do or where I can find out? Thanks

    • @MicheleP
      @MicheleP  5 лет назад

      Hi frank! I always suggest you to pick the highest one, so on your case is the second on the list!

    • @meniost
      @meniost 4 года назад

      Hello Frank, did it work for you?
      I tried to deactivate Stop Start but it doesn't work. The C_B_STOPSTARTInhibit value was already set to 1.

    • @frankcellini9363
      @frankcellini9363 4 года назад +1

      @@meniost Did not work... But I did it another way.. I checked the signals on the back of the switch that activates/deactivates STOPSTART and designed a circuit that switches the button electrically that you would do manually. When engine starts after 1 minute my circuit checks that light is not active and if not it contacts the switch with relay on my circuit.

    • @meniost
      @meniost 4 года назад +1

      @@frankcellini9363 I found the following procedure on a forum and it works!!
      Enable / Disable StartStop Function
      X98Ph2 - ClioIV Ph2
      ECU name -> BCM/UCH -> T4_VS_BCM_DDT2000_SW16_5
      Screens -> GEE -> GEE - Configuration
      Change value of E_B_STOPSTARTINHIBIT_CF to True
      And if you want to remove the sign from the dashboard, you can do the following
      Cluster X98_X87_X82 \
      GENERAL CONFIGURATION - SCREEN 1 \
      StopStartPresent_CF
      Change the value to "without something" in order to eliminate on the CdB messages related to S&S.

    • @frankcellini9363
      @frankcellini9363 4 года назад

      @@meniost Good job... might give it a try... where did you get your DDT4ALL software from because it has to have the necessary database included

  • @hirayaman246
    @hirayaman246 5 лет назад

    Can you also deactivate the start/stop dashboard light? I see the SS- function is deactivated but the dashboard light still shows.....when you push the SS deactivate button it also deactivates the dashboard light......

    • @MicheleP
      @MicheleP  5 лет назад +1

      nope.. unfortunatley not..

    • @hirayaman246
      @hirayaman246 5 лет назад

      @@MicheleP Thank you very much !
      Can i use an Elm interface to connect to my ECU ( wire interface)?

    • @MicheleP
      @MicheleP  5 лет назад

      @@hirayaman246 actually i never used a wired ELM, i prefer to use the wifi interface i suggest in my videos (link in description)

  • @grubre.2174
    @grubre.2174 4 года назад

    I tried doing this on my opel traffic but I don't see the batterygauge option.

  • @zaikavirus
    @zaikavirus 4 года назад

    Hello man do you know how to dezactivated antipoluation sistem???

    • @MicheleP
      @MicheleP  4 года назад

      You have to cut it off 😅

    • @zaikavirus
      @zaikavirus 4 года назад

      @@MicheleP ok but with ddt4all error need tu turn off :)

  • @skyline7891
    @skyline7891 9 месяцев назад

    Talisman 1.6 dci 160. 2017 its work. Thx. Greating from Polen ✌️🔥❤️

  • @AG-kx2up
    @AG-kx2up 5 лет назад

    Hy,can i do the same on my Dacia Logan 0.9 Tce from 2019?

    • @MicheleP
      @MicheleP  5 лет назад +1

      Hi Angelo! yes, you can, just simply choose the Dacia Logan when you open DDT4ALL!

    • @AG-kx2up
      @AG-kx2up 5 лет назад

      @@MicheleP Thank you!

    • @leonardmarcus7919
      @leonardmarcus7919 4 года назад

      Is working whit windows 7 ?, I need also to install a virtual machine? Becose I don't have a clue how to install a virtual machine on windows,in conclusion is working only whit windows 7 and DD4?

  • @patrykpekalski613
    @patrykpekalski613 6 лет назад +1

    Is this your new channel? all new movies will be here?

    • @MicheleP
      @MicheleP  6 лет назад

      Yes Mate! This is my new channel!

    • @MicheleP
      @MicheleP  6 лет назад +1

      I really don’t know why RUclips deleted my other channel! So I’m reuploading all videos here, plus many new ones!

    • @patrykpekalski613
      @patrykpekalski613 6 лет назад

      @@MicheleP What will be the next movie r-sound activation or how to turn off Esp.

    • @MicheleP
      @MicheleP  6 лет назад +2

      I guess r-sound activation and RS welcome screen with RS sound! But now it’s Christmas time! Give me some days off 😉😉

    • @patrykpekalski613
      @patrykpekalski613 6 лет назад

      @@MicheleP Merry Christmas😊

  • @brunolourenco6754
    @brunolourenco6754 5 лет назад

    Best mod ever. thanks

    • @MicheleP
      @MicheleP  5 лет назад +1

      THANKS!! 🙏🏻

  • @jackyyang3427
    @jackyyang3427 6 лет назад

    Hi, does it work in Megane RS, i mean do we have the Megane RS in ddt4all? Thank you.

    • @MicheleP
      @MicheleP  6 лет назад +1

      hi! yes it works! simply choose megane IV :)

    • @vagpro2546
      @vagpro2546 5 лет назад

      @@MicheleP ddt4all have language english or french !!

    • @MicheleP
      @MicheleP  5 лет назад +1

      @@vagpro2546 yes but i'm italian ;)

  • @matteo150893
    @matteo150893 5 лет назад

    Ciao Michele ! Innanzitutto complimenti per l inglese ! Ti invidio ahahaha , io ho una Megane sporter IV 1.5dci del 2016 con allestimento business navi R link , per quanto riguarda lo start and stop , la temperatura nel cluster dovrebbe funzionare lo stesso no ? Stasera provo con l iMac tu che programma usi come virtual machine per emulare windows ? Grazie in anticipo !

    • @MicheleP
      @MicheleP  5 лет назад +1

      ciao! si si dovrebbe funzionare lo stesso! basta che scegli la megane sw nel cluster scelta auto. io per emulare windows uso virtual box e mi trovo da dio, emulo windows 10 professional

    • @matteo150893
      @matteo150893 5 лет назад

      @@MicheleP intendi nella scelta del modello Megane IV sw ? Stasera provo ho installato anchio virtualbox con windows 10 Home 😉 grazie !

    • @MicheleP
      @MicheleP  5 лет назад

      @@matteo150893 yes! 👍🏻

    • @matteo150893
      @matteo150893 5 лет назад

      @@MicheleP grazie gentilissimo !

    • @matteo150893
      @matteo150893 5 лет назад

      Sono riuscito a fare tutto ! Start and stop , cinture , temperatura e sensori 😉😉 grazie mille !

  • @TheMrJanez
    @TheMrJanez 5 лет назад

    Hi, good chest! Tnx! Anything by engine upgrade? There should be back-up up to 10-20%

    • @MicheleP
      @MicheleP  5 лет назад +1

      engine upgrade? you mean a chip to add more power?

    • @TheMrJanez
      @TheMrJanez 5 лет назад

      @@MicheleP yes, something like that

  • @BzikuTOJEJO
    @BzikuTOJEJO 5 лет назад

    I must reset r link when im change?

    • @MicheleP
      @MicheleP  5 лет назад +2

      No, with this hack the reset is not necessary. But I suggest you to lock the car and leave it locked for a while, so all the ECUS go in sleep mode and once you unlock the car they will restart. 👍🏻

    • @BzikuTOJEJO
      @BzikuTOJEJO 5 лет назад

      @@MicheleP I can't connect to the car: the port is not shining in red and yellow, everything works despite this I can't connect, what am I doing wrong? please help

    • @MicheleP
      @MicheleP  5 лет назад

      @@BzikuTOJEJO be sure to deeply insert the obd interface in the port. sometimes also mine doesn't work and the error is just that i didn't deeply plugged the interface to the port. it has do sound like a "click"

    • @BzikuTOJEJO
      @BzikuTOJEJO 5 лет назад

      @@MicheleP ok works i clicked on wi fi and it didn't connect and i had to click on 1 icon this modem and everything works the system off, please more movies from megane

  • @killuaN95
    @killuaN95 5 лет назад

    It can work with linux yea mac have problem with python but i tested in ubuntu it work

    • @MicheleP
      @MicheleP  5 лет назад

      Thanks for the info mate! I actually use it on a Mac with a virtual machine!

    • @killuaN95
      @killuaN95 5 лет назад

      ​@@MichelePdo you use Bridge on your Mac Wireless NIC or you just plug another WIFI adapter !!

    • @MicheleP
      @MicheleP  5 лет назад +1

      I simply use the WiFi interface with the onboard WiFi of my mac

  • @legioner9
    @legioner9 5 лет назад

    I can not disable the engine sounds. All I have is Normal, Comfort and Sport, but no OFF option. Please help.

    • @MicheleP
      @MicheleP  5 лет назад

      Did you activated it via DDT?

    • @legioner9
      @legioner9 5 лет назад

      @@MicheleP I did not. Today, at 1:30 PM, I am going to Renault for many problems. I will mention this problem also. I have a Megane 4 Sedan Intense with 140 bhp at it has many quality issues which generate many unpleasant noises inside the cabin.

    • @peterr6761
      @peterr6761 4 года назад

      @@MicheleP Hello! I would also ask if it is possible to disable this engine sound feature completely with ddt4al?

    • @MicheleP
      @MicheleP  4 года назад +1

      Yep, you have to disable the ESE (engine sound enhancement)

    • @peterr6761
      @peterr6761 4 года назад

      @@MicheleP And where is this ESE in ddt4all? Cluster, bcm or whatever? Please help! :-)

  • @taffypride1983
    @taffypride1983 5 лет назад

    Assume this is the same for the Twingo III/Smart ForFour?

    • @MicheleP
      @MicheleP  5 лет назад

      yep! you have to select the right car in the DDT4ALL interface

    • @taffypride1983
      @taffypride1983 5 лет назад

      @@MicheleP ah ok. Reason I was asking is the modules don't seem to be named the same or have even the same options.....

    • @MicheleP
      @MicheleP  5 лет назад

      unfortunately sometimes modules and clusters have different name, depending on the vehicle type

  • @BigBlockEntertainmentCanada
    @BigBlockEntertainmentCanada 5 лет назад

    2016 Smart 453 with out Start Stop Switch. Can I activate it with out the switch?

    • @MicheleP
      @MicheleP  5 лет назад

      You probably have to choose Renault Twingo, it shares many components with the Smart

  • @paolodrago806
    @paolodrago806 3 года назад

    Ciao Michele potresti tradurlo in italiano per piacere?

  • @vladiancu3821
    @vladiancu3821 Год назад

    Esiste un altro modo x farlo senza che ti rimanga il simbolo accesso nel cruscotto

  • @michelfarey6190
    @michelfarey6190 4 года назад

    Thank you

  • @masc4144
    @masc4144 2 года назад

    You can damage the Turbo, the alternator and the battery 🤣🤣🤣🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪🤪

  • @FixMain672
    @FixMain672 5 лет назад

    Ma parla come mangi !

    • @MicheleP
      @MicheleP  5 лет назад

      se lo facessi solo in italiano tutti gli utenti esteri ne risulterebbero tagliati, che ne dici?

    • @FixMain672
      @FixMain672 5 лет назад

      @@MicheleP E' una tua scelta, ma esistono altre possibilità, ad esempio Davide Cironi parla in italiano e mette i sottotitoli in inglese e non mi sembra gli manchino visualizzazioni.

    • @MicheleP
      @MicheleP  5 лет назад

      Se paragoni me a davide Cironi sei proprio fuori strada. E sinceramente se non capisci l’inglese non è un problema mio, buona serata.

  • @stasvikeshin7766
    @stasvikeshin7766 Год назад

    Hello I have a question I had Megane 4 2018, I programmatically disabled the start stop now I bought a megane 4 2023 and the ecu does not respond to shutdown start stop commands and other data changes. after saving the changes, all parameters are returned to stock Maybe new models have some kind of protection?

    • @Baptistonneau
      @Baptistonneau Год назад +1

      Yes, all Renault cars after 2020 block writing...