Thank you so much. This was very helpful for two reasons. Number one, the little cap with tongue on the shifter cable, and two, the fact that there is no cap inside the shifter for the brake cable.
Your video saved me a lot of time as I am a newbie, those popular youtube cycling videos doesn't even helped me because they skipped or trim their videos a lot and focus the video more on their faces. Thank you Sir Godbless you
Does the cabling housing for the brake have to go all the way in till it stops, or it can it stop a bit short before it reaches the end? I may have cut my cable housing wrong :(.
Both the cables come out on the inside of the lever right? My bars have a cable hole on outside of lever and a cable hole on inside of lever, so these levers might not work unless I use bar tape to guide one of the cables externally right?
Hi thanks for this, do you think the ferules with the tounges are essential? Could a regular cable ferrule without the tounge be used or would it spoil the cable action. It's a right pain trying to get hold of a ferule (end cap) with that tounge. thx
Hi, Just picked up a pair of these shifters second hand. Unfortunately no plastic end caps came with them (3:20 on your video). Can these be purchased separately or would any other ferrule with a groove work? Thanks
I’ve just checked all the gear cable kits I have and everyone has two of the shifter ferrels in the pack!! That’s why it’s a kit to fit inner and outer cables to both derailleurs from both shifters!
Thanks for this great vid! Really helpful. I have a question - I can't quite see on the vid... is there a grey plastic runner inside the slot for the gear cable stopper? I'm just trying to change mine and have noticed that on the left shifter there is a grey inner plastic part that isn't present on the right shifter. Is it supposed to be like that, or have I lost a piece? Complete novice here so sorry if that's a ridiculous question!
excellent vid, thank you. for us having to upgrade 20 yr old non serviceable ultegra shifters to sora (because they're 9 speed) is a pain. Q. would you reuse the old shimano outers on the gear cable or switch to the new sora outers which look a bit different (using the new gear cable).
It took me a while to test it but Sora shifters works with Acera rd, it's just a little more sensitive shifting upwards to easier gears, also it works well with 11-40 cassette
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
This video is literally 1000 times better than anything I have seen online for installing these cables.
Thank you so much. This was very helpful for two reasons. Number one, the little cap with tongue on the shifter cable, and two, the fact that there is no cap inside the shifter for the brake cable.
This is the best guide on the Internet
Your video saved me a lot of time as I am a newbie, those popular youtube cycling videos doesn't even helped me because they skipped or trim their videos a lot and focus the video more on their faces. Thank you Sir Godbless you
Great maintenance and repair videos. The direct no-nonsense style is spot on.
Perfect video!!! Best I've seen. Short, sweet, and to the point.
Excellent, excellent, excellent! Was so scared to attempt this but now feel very confident, extremely good guided video
Short and good video, thanks! I can’t say how much this helped giving confidence on the first time
Million thanks mate 😀 really couldn’t find any other video except yours. Very helpful for me as I’m doing my DIY upgrade using same equipment.
Basic tutorial. İt is perfect. I know little bit English but I understand. Thank you very much.
Thank you, been struggling to see how these go in.
Excellent tutorial. Exactly the information I needed. Thank you!
Exactly. Thanks!
Thanks!
Thank you ! Simple but really effective.
Thank you for putting up this vid..this will make it easier for sure when time comes for mine. Cheers !
Thanks for taking the time to do these videos they have helped me a lot .hope you keep doing them .
Thank you, this video was perfect.
Thank you for this,This really helped alot
The Video is good but the accent is fabulous! Thanks a lot!
Thanks for posting it helped me today .
Thanks!!! This video really helped me out.
Good video. Right to the point.
Thanks man. This is a brilliant video, so clear
thanks mate a was lost trying to get me old one out so watched this to figure it out ,,nice one
Hi, how did you get the shifter head out? I tried to push the cable outward but the head just go down deeper. Can please advise?
Excellent, thank you for sharing this!
perfect for what we needed it for
Thank you so much... you save my day
Thanks mate for the tips
I love it , It is really useful
Good video, thanks👍
Very useful, thank you
Thanks mate!! That was usefull now.. 😂
cheers dude didnt have a clue !
Perfect! Thanks!
Good guide but my old cable broke near the nipple and is stuck in there… is there an easy way to get this out?
What do you do if the cable is already cut and not in the lowest gear?
Very helpful
Does the cabling housing for the brake have to go all the way in till it stops, or it can it stop a bit short before it reaches the end? I may have cut my cable housing wrong :(.
Both the cables come out on the inside of the lever right? My bars have a cable hole on outside of lever and a cable hole on inside of lever, so these levers might not work unless I use bar tape to guide one of the cables externally right?
Bravo. Super.
What is the seat post made of?
thank u so much sir!
Legend
hi, are these shifters Sora compatible with any 3x9 front derailleur ?
Thank you
Fantastic
Is it the same for the left shifter?
Yes!
same process for claris 2000 or tiagra 4700?
Obrigado pelo vídeo 😸
awesome, thank you!
Sorted. Cheers!
Thank you!
hello, is it difficult to install road shifters on a fintess flat bar bike ?
Trying to find outer cable ends. Amazon?
Search online for Shimano SIS outer gear casing.
Thanks a lot!
Hi thanks for this, do you think the ferules with the tounges are essential? Could a regular cable ferrule without the tounge be used or would it spoil the cable action. It's a right pain trying to get hold of a ferule (end cap) with that tounge. thx
I'm finding it hard to get thebuld cable out. I suppose I just have to use a small flat screwdriver or something to lift the end out.
This video may help you!
ruclips.net/video/MWDuQRXiGO4/видео.html
That’s a very specific gear cable end. I just bought some of these 2nd hand but don’t see the ends. Will any end do please?
The correct cable end for the shifter comes in any Shimano gear cable set.
Thanks mate
Hi,
Just picked up a pair of these shifters second hand. Unfortunately no plastic end caps came with them (3:20 on your video). Can these be purchased separately or would any other ferrule with a groove work?
Thanks
You will get the correct ones in a Shimano gear cable kit!
@@FreeToCycle Thanks for the reply - I can't see a ferrule with that groove in the gear cable pack from shimano... Is it a special order item?
I’ve just checked all the gear cable kits I have and everyone has two of the shifter ferrels in the pack!! That’s why it’s a kit to fit inner and outer cables to both derailleurs from both shifters!
Thanks for this great vid! Really helpful. I have a question - I can't quite see on the vid... is there a grey plastic runner inside the slot for the gear cable stopper? I'm just trying to change mine and have noticed that on the left shifter there is a grey inner plastic part that isn't present on the right shifter. Is it supposed to be like that, or have I lost a piece? Complete novice here so sorry if that's a ridiculous question!
My old cable snapped and the head is now stuck inside, is there a way of getting it out e.g. removing the whole thing and taking it apart? TIA
ruclips.net/video/MWDuQRXiGO4/видео.html
Parabéns... Ficou ótimo
excellent vid, thank you. for us having to upgrade 20 yr old non serviceable ultegra shifters to sora (because they're 9 speed) is a pain. Q. would you reuse the old shimano outers on the gear cable or switch to the new sora outers which look a bit different (using the new gear cable).
I would use the outer cables that came with the gear cable kit!
Gracias, fue de mucha ayuda
thanks
Can you shift Sora rd with Acera shifter for flat bar?
my guess is yes. they are both 9 spd and from memory the mtn bike also uses the HG50 rear 9 speed cassette. Just a guess though.
It took me a while to test it but Sora shifters works with Acera rd, it's just a little more sensitive shifting upwards to easier gears, also it works well with 11-40 cassette
Is it possible to install this lever onto Shimano Sora R3500?
Of course
@@renzocipriani Thanks
thanks.
Brilliant.Except of course I couldn't even make it to that bit coz I can't remove the old cable.
TOO LATE ! I've pulled so hard to get it out I've probably damaged the shifter beyond repair !
ruclips.net/video/MWDuQRXiGO4/видео.html
Anyone who has idea if I can convert sora r3500 to r3000 by just changing the shifter?
Brilliant thanks !!
Thank You!!
Thanks!
Great. Thanks!
Thank you!