Это видео недоступно.
Сожалеем об этом.
Choosing ESCs for FPV
HTML-код
- Опубликовано: 1 авг 2019
- Learn to FPV Episode 13
See our full lineup of ESCs here - rotorriot.com/...
Great resource to see what ESCs others are using - rotorbuilds.com/
- - - - - - - - - -
Support Rotor Riot by purchasing from our store:
rotorriot.com
Want to fly FPV like the pros? Start here:
learn.rotorrio...
Get Rotor Riot Apparel here:
rotorriot.com/...
Get Rotor Riot Motors here:
rotorriot.com/...
Get Pre-Built Drones here:
rotorriot.com/...
Check out the latest FPV Parts on the market:
rotorriot.com/new
Would you like a monthly goodie box?! Check out Kwad Box:
www.kwadbox.com/
- - - - - - - - -
-Hosted By
Jeff Orta [VORT3X]
/ vort3xfpv
www.rotorriot.com
![FPV Gear on the Ground [Radio, Goggles, Charger...]](http://i.ytimg.com/vi/6RF5LMlo9OE/mqdefault.jpg)
Finally the thing I needed I'm making a fpv drone for my schools science fair and I'm learning a few things about it so thanks for this series so I don't waste money
Im not totally new to the hobby , but I find your videos very informative for beginners or like myself once’s who have been slow on learning the pcs and parts of a quad
You forgot to mention- to program BLHeli32 ESC's you need the BLHeli32 software. The software that works with older ESC's like BLHeli S and so on won't work with new 32 ESCs. That info is pretty important as this video is aimed at beginners that would be stumped when they need to change motor rotation.
Great point, and the most current version. I have had issues trying to flash firmware and getting my settings to save properly, then I realized that my version of the configurator was not current, after updating the configurator I was able to successfully load firmware and write settings to the ESCS
@@xtkfpv5306 , my esc burned while running fpv , my esc 30a but same model not available in india but I have 45a esc, what if happens when I connected to this motor my motor rpm is 2150 and max continues current is 31a.
@@seenivasan2541 Hi Seeni, Yes you can put a larger Amp rated ESC no problems, the RPM is only determined by the KV of the motor multiplied by the battery voltage, so current does not factor in. but you should make sure to try to find the route cause of the failure or the new ESC may fail as well. Common causes of ESC failure include: Short Circuits, Bad tuning, bent motor bell/ out of balance motor, severely damaged prop or sometimes just hitting the ground hard with motor spun up can all cause esc to fail. Sometimes shorted motor wires can also be the cause, insepect your wires and the carbon fiber chasis anywhere the motor wires contact, for burns or burnt smells. Remember carbon fiber is conductive, if you have cuts in your motor wire insulation caused by wire ties or prop strike, the wires can short to each other either directly or through the carbon fiber chasis. Smell your motor on the failed channel or esc circuit, does it smell burnt? If motor windings to get too hot it can melt the insulation, if the motor windings look black or dark brown in color or smell burned, the motor could be internally shorted and cause the new ESC to fail also. When you install new ESC follow instuctions for setup and remember to update your betaflight config to new ESC settings.
A video on choosing the right wire between each component might also be nice. I've seen some funny choices on a couple of occations.
Getting interested in making my own drone, thank you for being the logical voice in a see of Vblogs and non-scripted double-talk "tutorials".
Thank you.
Nicely done Jeff.
Man, this song slaps.
Great informative video for beginners . 👍
While it’s nice to have to only replace one individual ESC if it fails, the individual ESC’s quadruple the chance of failure. More parts=More failure points.
Great video, very informative . Thanx a lot
I keep trying to buy a DIY kit somewhere, but everyone is out of stock of all the decent kits. If I part it out I can’t get the good components either because everything is always out of stock. It’s so annoying! Where is all the inventory?
Kids these days, with their beeping motors and turtle modes...back in my day we used to make ESCs out of iron we had to mine ourselves. With our teeth!
It looks like you lived in gold age. 💪
Great job vortex! Your my boy blue!
Bwaahaa 🤣
We're going streaking, through the QUAD!
Good Job on this one!
Weird. This vid DID NOT and still IS NOT being shown in my subscription notifications. It came up as a random recommendation
fp free same for me!
At last I learned about this fucking ESC ... Thank you so much
Great info. Thanks
This is what I luv to see from rotor riot great 👍🏼 luv the video
can i use 25a esc for my motor that has max at 24.1a..sorry for my bad english
Yes it would work great
In fact now that I check, in the last 2 weeks alone there are at least 6 RR vids missing from my subs list
I’ve never built a drone and this video helps a lot. Just one quick question. The current number on the ESC, is it dependent on the battery or the motors? Do I match the current number to the “C” number on the battery or the amp hour on the battery. Or do i look at the motors to tell me what ESC current number to get?
Really fuck w the intro! And maybe do a video or two on tutorials for the new DJI digital system? Could ride on the trend for views and also be very helpful for beginners/new viewers which I would assume is increasing a little cause of the new commotions around new products?
Good stuff.
Question: If I buy an individual ESC that is capable of DSHOT 1200 can I expect that any flight controller can communicate with it via DSHOT1200?
I have a bl hali s 20x20 dshot 15a. 4 in 1. 2-4 S. What would be a good flight controler to pair with it. Can I build a 3 inch had with this?
nice info 👍🎬
Hey yall! Just got one.. question.. is 20 amps on a 4s 5 inch drone enough to get started with freestyle? I dont wanna punch too much money in my drone as i dont know if im going to continue FPV or not. I just got 4 of XM 20A laying around and wanna use them for good. Thanks
first song=best liftoff song
Whats a good FC for individual ESCs
Question:
Does each each esc on a 65a 4in1 esc deliver 65a to each motor or is it total of the whole esc?
65A x 4 = 260a
@@MircoBonfiglio why would they not advertise that a 260a esc seems a lot more powerful than a 65a esc and plus you’ll blow up the esc before the battery meaning the total draw for the esc is 65a
I have 3 30 a esc and 1 diffrent brand 25a to 30a can i combine?
What's the difference between a 10 dollar esc vs a 25 dollar esc???
More filtration and high quality FETs and bigger more powerful fets... Higher quality PCBs...
Cheap ESCs always have very cheap low quality fets and cheap fets like to pop.... More costly FETs on higher end ESCs are larger and much more robust, can switch faster and cleaner and will withstand abuse much better and have a much less chance of popping.
15 dollars hahaha
why are these still not showing in my subbox
What do you think of ESC for DJI Mavic Pro?
I recomend ESC Pro
What do you mean? Those ESCs don't need to be ultra high preformance but rather need to be ultra reliable and smooth with a near zero chance of desync... They would not preform nothing like what a race quad esc does... The switch rate will be far lower, they don't have to deal with massive RPM changes all the time and have to respond to those changes instantly and spool up and spool down the motors and insanely quick rates... A camera ship esc has 2 goals that is ultra reliable and as close to zero chance of desync as possible.
that music from liftoff!
Very useful from a newb
Hes shooting this vid in his tighty whities and tube socks
Naas RR is going under and he knows it... That's why he's so ridged right now and sounds sad.
🚀🛩️VORTEX SENSEI🛩️🚀
Can i burn my esc when i'm dissarmed?
I think Uncle Rob demonstrates that in one of his videos...
One shot? No one uses oneshot anymore... The correct two would be Dshot or Multishot...
I fly dshot 2400! He he he
#2
3rd lol
First. Lol.
Yea same