Aye man BIG KAPP was never aware of the madness you are speaking of but with that being said I will definitely be purchasing 2 tubes for all the dope projects to come
Troy...Troy...Troy.. Troyyyyyyy!! These look great!! Wow! All I can say is WOW! Now, as for the edges.. there is a little something you can try, as I've had to fix sanded acrylic edges many times... take a torch of some sort, I used a blow torch, and go over the edges with it... you will have to try it on a test piece first just to get the right distance and speed. It will look like glass if you do it right! Thank you for the video!
@@TroytheMaker hahahaha.. I hear you! You can also use a fine sandpaper and Acrylic clear spray..but that's a lot of work. It still is very nice! Thank you again for sharing. Keep up the great projects!
Nice Troy...If you cut half inch acrylic in 2 passes more power to ya...lol. I`m on my 3rd Glowforge due to them tearing up, but it use to take me 3 passes to get it cut. At full power and speed 105. Have not tried it on my new one yet gonna have to see. Anyway Great Boxes. Love em.
Another great project Troy!! To center your polygons you can also use the same set of x and y coordinates for each. For example click the ruler, click the big polygon and set x to 7 and y to 7 (number doesn't matter) then click the small polygon and set x to 7 and y to 7.
Troy, the next time you show a project in the glowforge app, can you please 🙏 place a piece of wood or pain the bed so that we can see the images as you design them? Other that that it was a Great video.❤
Love the videos! Any way to change the workspace from black to another color? I can hardly see what you’re doing but it could be my phone brightness as well
These are really cool! Great finished pieces. Very minor recommendation - have you tried acrylic bonding solution to glue the layers? I'm sure the e6000 will hold just fine but the acrylic bonding solution is the professional, permanent way to bond acrylic together (and it's a nearly instant bond).
Hello. I enjoy watching your projects. Can you try doing some of the 2 piece bar menus or maybe a business QR code sign? There aren’t any videos out there of these. Also, would you happen to know what settings I should cut 1/4 thick acrylic on? I was trying to cut some the other night and saw some flames and got scared and canceled the print. I’m thinking maybe it wasn’t at full speed
I have did business sign but with printed QR code put inside them. I will make a video in the future. I believe the speed is 115 Full Power for the settings.
Half inch! I need to get brave like that, I'm missing out! That ring box looks so awesome!
Really creative 👌 Thank you for sharing
Great Content Troy!
Aye man BIG KAPP was never aware of the madness you are speaking of but with that being said I will definitely be purchasing 2 tubes for all the dope projects to come
💯💯😂😂
My favorite project video so far bro. keep pumping them out
Thanks! Will do!
Troy...Troy...Troy.. Troyyyyyyy!! These look great!! Wow! All I can say is WOW! Now, as for the edges.. there is a little something you can try, as I've had to fix sanded acrylic edges many times... take a torch of some sort, I used a blow torch, and go over the edges with it... you will have to try it on a test piece first just to get the right distance and speed. It will look like glass if you do it right! Thank you for the video!
Thank a Million! I think I can see what you saying with the torch, but I live in an apartment. I'll burn the building down.
@@TroytheMaker hahahaha.. I hear you! You can also use a fine sandpaper and Acrylic clear spray..but that's a lot of work. It still is very nice! Thank you again for sharing. Keep up the great projects!
These are gorgeous! You've inspired me!
THAT'S DOPE MY BOY... 💯💯💯 CAME OUT GOOD
Thanks a Million!
Beautiful work as always!
Nice Troy...If you cut half inch acrylic in 2 passes more power to ya...lol. I`m on my 3rd Glowforge due to them tearing up, but it use to take me 3 passes to get it cut. At full power and speed 105. Have not tried it on my new one yet gonna have to see. Anyway Great Boxes. Love em.
Thanks a Million! I don't cut 1/2 that much.
Another great project Troy!! To center your polygons you can also use the same set of x and y coordinates for each. For example click the ruler, click the big polygon and set x to 7 and y to 7 (number doesn't matter) then click the small polygon and set x to 7 and y to 7.
Ok I didn't think of doing it like that. I appreciate the tip. ❤️
This is amazing 🤩 and great job on this project. 👏🏽👍🏽
Thanks a Million!
Just used your referral code because I love the content you share!!!❤❤
Thanks a Million! I appreciate it more than you think!
@@TroytheMaker glad to know. I ordered the basic. I hope the month goes by fast
Likewised. I ordered my gf under his referral link too.
Troy, the next time you show a project in the glowforge app, can you please 🙏 place a piece of wood or pain the bed so that we can see the images as you design them? Other that that it was a Great video.❤
✍🏾 I got you!
These is amazing!! I was just wondering why I can't put bell on your channel. I can on everyone else's. 🥴🥴🥴
Thanks a Million! That is weird. I don't know.
I love this! Thank you for continuing to make great content. I've got my GF using your code.
Thanks a Million! I appreciate it more than you think!
Love the videos! Any way to change the workspace from black to another color? I can hardly see what you’re doing but it could be my phone brightness as well
✍🏾 I got you on the next tutorials.
I wonder what it look like with felt and led lights in them
Dope idea!
Where did you get the 1/2 inch acrylic from?
I brought it locally from a plastic supply store.
Great video! Do you sell fines? Also what software are you using?
troythemaker.sellfy.store/
I use coreldraw.
These are really cool! Great finished pieces. Very minor recommendation - have you tried acrylic bonding solution to glue the layers? I'm sure the e6000 will hold just fine but the acrylic bonding solution is the professional, permanent way to bond acrylic together (and it's a nearly instant bond).
Yeah I use acrylic solvent all the time just wanted to use the E6000 its a on going joke. Haha
Hello. I enjoy watching your projects. Can you try doing some of the 2 piece bar menus or maybe a business QR code sign? There aren’t any videos out there of these.
Also, would you happen to know what settings I should cut 1/4 thick acrylic on? I was trying to cut some the other night and saw some flames and got scared and canceled the print. I’m thinking maybe it wasn’t at full speed
I have did business sign but with printed QR code put inside them. I will make a video in the future. I believe the speed is 115 Full Power for the settings.
I need to make a shoe box ? Have you made one Troy
Hey Troy have you made a shoe box ?
It is in the works. A custom shoe box. Can't wait to share.
Was it just me seeking a black screen for the first 4min 🤷😅 nice job 👍
Troy do you sell files ?
Working on it. Coming soon. Send me an email I can send you the pdf troythemaker@gmail.com
@@TroytheMaker yay! Definitely want to support!