I Made a Battery Spot Welder from an Old Microwave and Excessive Mahogany
HTML-код
- Опубликовано: 3 окт 2024
- Tools and Things:
Stepcraft CNC: www.stepcraft....
3D Printer: amzn.to/3E9jXge
Solder Breadboard: amzn.to/3DWLfX1
Solid State Relay: amzn.to/3hdRYlD
Arduino Starter Kit: amzn.to/3BTT1it
Arduino Uno: amzn.to/3yWY2oq
Info:
Original Instructables: www.instructab...
My Arduino Sketch: pastebin.com/q...
''Honey where is our microwave?''
''Funny you mention that, actually...''
Hot in here, or is it just me...
Just swap out the welding tips for skewers and instant kabob cooker!
He put it back and waited for someone to use it and discover it don't work. Then he just went out and bought another one. They will never know.
Spot welder go BZZZZT
"I'm using it"
"Transformers are electromancy"
*Proceeds to build and program a solid state arduino controlled curcuit capable of handling a massive amount of current supplied by a basic single phase step-down transformer that works on the very first try*
That is technomancy. Technomancy is totally different from EElectromancy.
Technically, it's controlling the primary which isn't a massive amount of current.
But it is indeed wizardry
@@Gcrilla It's not even controlling the primary. It's controlling the relay that is controlling the primary. Much like an ogre, electrowizardry has layers.
The machine spirit wills it today -Random Adeptus Mechanicus
Black box theory my dude
shout out for making something that so perfectly gives off that vibe of "i found this in my grandpas old shop and have no idea what it is but it seems scary"
you mean like the arc welder i inherited from my grandfather that has cloth covered wires?
What you want for your welder's cables is funnily enough called Welding Cable. It uses much finer strands then typical wire and EPDM or neoprene insulation for greatly improved flexibility. FYI it is also great for use in high power rv dc power systems because it's much easier to route and work with in confined spaces.
You can also use silicone cable from eBay etc (maybe 8GA?), car jumper cables, or the wire they use for high power audio amplifiers. The silicone cable from eBay will be the most flexible (by far).
@@johncoops6897 I agree. Probably much cheaper. The key is using oxygen free copper or ofc with silicone insulation. Stay away from copper clad aluminum or ccl, it will also usually be cheaper than the ofc
@@georgec1979 - Don't be so silly. This is very low frequency AC so _"Electron flow happens primarily on the surface of the wire strands"_ is just rubbish. Where do people pick up this idiotic ideas, Audiofool Forums?
EDIT TO ADD: At 60 Hz in copper, the skin depth is about 8.5 mm. So, unless each *strand* in the cable is greater than 17mm (about 3/4") the skin effect is totally irrelevant.
@@Moonsauc3 - no need to worry about "Oxygen Free" or similar marketing rubbish. Plain old copper is what you need - oxygen is useful stuff in the air you breathe, but isn't significant in power cables.
The conductivity of common C11000 Copper (ETP) and higher-cost C10200 oxygen-free (OF) Copper is identical. The extremely expensive C10100 grade OFC used in cryogenics is only 1% higher conductivity (insignificant)
@@johncoops6897 it's not the conductivity that I was concerned about, it's about the rigidity of the wire itself. The ccl is much more stiff than pure copper. Plus it doesn't break as easily over time.
We are so here for this kind of fabricobbling content! It's always a joy to watch.
Seeing you comment about security Torx fasteners gives many of us AvE vibes. 😁👍
It's funny who you'll meet in a youtube comment section. Watched your videos years ago and suddenly you show up on InRange and now here. It's indeed a small world or rather there's only little quality content.
@@Amarok41 hah, I broke into this comment section because it wasn't locked in a serious way 😉👍
He must not have his attack chicken out.
@@zendell37 indeed, nobody wants to mess with an angry chicken 🐔 😯
Hah, I wouldn't have even looked at the name if it hadn't been for that first reply. I just got roped in by the word "fabricobbling"
5:30 - You learned tolerances! Hurray! The worst part about taking your beautiful CAD model and bringing it into the real world.
The real world is a jerk..
@@Entarra Meatspace is worst space.
Actually also tuning a 3D printer can be a pain in the ash. Filament and slicing settings can offset even more than the tolerances in normal substraction manufacturing
for the size of those copper chop sticks i would have just given each side a skim with the grinder rather than printing a new one.
With how fancy of a box Robert made for his spot welder, I cant wait to see the box that he makes for his batteries!
That's gonna be Sandalwood with Yew Wood accents. 🤣🤣🤣
If he makes it out of wood maybe we can get to see some of the magic smoke. If there's tung/linseed oil it'll be extra coochy.
I am here from the future! He hated it, so he did the Robert thing and made an even more complicated one out of metal and acrylic! :D
"Have you seen the microwave Robert?" **Zap** 'No'
Hey Robert, I have looked through your arduino code and I think it might be worth adding a safety feature to it. Currently, you're checking if the button is pressed on every loop of the program and activating the relay if that is the case. So if you hold the button pressed in all the time, the relay will activate again and again on every loop of the program. As a result, if you set the activation time low enough and/or don't release the button quickly enough, the relay will activate multiple times.
You might want to add some code, to check if the button had been released and pressed in again, so it would only activate the relay once for every button press. Might save you from burning up the connections you want to spot weld and save you from a fire, in case the button gets stuck pressed in.
Anyway, great project, you might have convinced me to try it myself. There have been times when I wished I had a battery spot welder, but not often enough to go out and actually buy one and I've been hesitant to make it myself.
if(isButtonPressed()) {
activateRelay(300); //hard coded during development
delay (500); //debounce delay
while (isButtonPressed()) { //this while loop hangs until the button is released for the next activation
// Do nothing
}
}
}
"How do you get people to stop using your tools?"
Dude I almost spit out my coffee! Nicely done
I get the feeling we're going to see a ton more 3D printing in the future. "When all you have is a hammer, everything starts to look like a nail"
Make that switch button into a foot switch! You'll really like having a free hand. 13:37 - You will desire!
he could make a handle with the button on it and literally weld with it lol
@@yurmofuggndad - yes, he did not protect in the code against re-triggering, so actually possible! 🤓😁
The channel might be called Under Dunn, but I'd say that spot welder might be Over Dunn. Makes me want to make one now, even though I have no use for one.
*Easy to assemble **Fastly.Cool*
Scammer
you seem to have an endless supply of mahogany. When we get the next tour of the woodshop, I expect to see the only mahogany French cleat wall in existence.
"Excessive Mahogany" - it's interesting to see the different region RUclipsrs with their different locally available excessive species.
In the vague hope that you'll see this - I just thought I should mention that your regular channel is not featured on this channel! I actually came for the woodworking content and now suddenly I'm watching a guy deconstruct a bus, but it took me months until the algorithm told me about the other channel!
I came for the bus and only found out about this channel because Robert mentioned his "other channel", ie this one.
Even then I had to search for it.
The audio edit about 4 minutes in, with the sound of it being on only stopping when you touched the transformer, but you had it unplugged the entire time, is pure genius. Thank you for being you and trusting us enough sharing it.
Another Channel where RUclips recommendations algorithm was eerily spot-on. Enjoyed the info and delivery.
I see you're flaunting your RUclipsr wealth with all that copper!
As others have mentioned, we're here for the fabricobbling!
This guy's the best. Best sense of humor too.
Building cool stuff while exercising self deprecation at the highest level. Awesomeness
Your edit on cutting the box joints is my favourite part.
*I'M GLAD I FOUND THIS CHANNEL!!*
Best "how to" on these DIY welders I've seen.
I really love how over-under-over-engineered this project is!
Until 9:15 I was wondering where the mahogany in the title was going to be used. Awesome spot welder! Amazing how we now typically use Arduinos where we used to use a simple 555 timer or even a single transistor with an r-c circuit to time it. But then, it wouldn't have worked the first time.
Having precise control of the timing is nice, although analog has a certain charm to it
Seems like wasteful overkill to me.....
@@sugarbooty u also don't have to spend day reprogramming shit if it blows up.
@@plainedgedsaw1694 it would take me 10 or 20 minutes to program something this simple, and if it blows up its probably not the microcontrollers fault
@@sugarbooty I meant the scenario in which the uC would get blown up, both more expensive and time consuming to repair than just swapping socketed 555 or smtg.
Hi Robert, I found your channel through the Hackaday blog, super happy they linked it! Having a blast going through your videos, love 'em!
This is a masterpiece and I loved the humour involved in it's making, but I particularly liked the unintentional Teckno music effect when making the box joints.
That was totally intentional. It's way too good.His editing is amazing.
I like you, you're hilarious. This video was brilliant, thank you. I more-than-half expected the finger-joint cutting montage to turn into a song.
RE ripping that board vertically on the bandsaw, well done & hilarious! hahahaha
Love the way you approach things and your sense of humour!!
I'm getting some real Mattias Wandel vibes from the woodworking, I love it.
Segfaults... That is one seriously nerdy shirt. Respect.
Just FYI: if you can, it's better to remove the secondary without cutting the transformer open (you can for example cut the winding in half and punch it out) because if you break the core you'll never weld it together perfectly and it's gonna change both the inductance of the primary and in general increase the loss of the transformer. You can see this in the video when the transformer vibrates really loudly and draws a lot of current even with no load
Would be cool if he could try this with a different transformer and see how much current it draws without load.
Microwave transformers are purposely lossy. Wasting power with no load was the cheapest way to current limit the magnetron tube.
@@anullhandle Yeah, but still, drawing 10A @120V is a lot of power loss. I don't think they're supposed to waste a kW just sitting there idling
@@gigigigiontis8 yeah that's a cubic butt load. I think they had magnetic shunt pcs in there making them lossy but kw idle is a BIT much :)
Yeah, there was a visible gap where he welded it back together.
If you had half as much fun doing it as we had viewing it, you had a lot of fun indeed!
We used to say that the most dangerous thing in the world is a programmer with a soldering iron… and that was before people started tearing apart microwave ovens.
Nice job!
You should have made the arduino play some short annoying tune every time it has produced a welding pulse. It helps in remembering that tune for the rest of your life when seeing a battery pack.
Your Dad has an awesome garage.
The best part of your videos is just how fearless you are! Thanks for sharing.
Making things that make things are my favourite things to make.
I made one a year ago and used it to cobble a 18V 18650 bosch battery for dirt cheap. Almost the exact same setup as yours just it featured a foot switch which i also made from microwave relay from doors lol
First “safe” one of these I’ve seen. Nice job
No comment. Just a +1. But a real, a heartfelt +1 .... lovely.
Cool, I've used a wine bottle box and instead of cutting the core I've sawed off one end of high voltage coin and pushed it out. For the switch I've used a "wall mounted" 230V spring loaded light/doorbell switch bolted to a plank so that I can operate it with a foot.... Although I've never made a spot welder head, instead I've used it to heat wire to cut Styrofoam. And for melting stuff :)
FYI those switches are not designed for inductive loads AFAIK.
@@nyetloki And what's a classic door bell if not an electromagnet pulling the bell hammer? But sure, these are drawing milliamps so wear of the contacts is minimal. On the other hand same switch design, lacking only a spring is used for light switches and some lights, e.g. linear fluorescent are inductive loads.
@@mibars you think a common doorbell switch is made to handle 1400W inductive loads?
@@nyetloki That's a tricky question because the switch is rated for 10 A with no mention of type of load. That switch, in a regular light switch variant which only lacks a spring could be used to switch dozens of linear fluorescent tubes with magnetic ballasts which will be below 10 A, but would be definitely an inductive load. I think it would wear out prematurely.
Do NOT open a microwave over unless you know what you are doing.
Lots of angry pixies in there even when it's unplugged.
This thing has been unplugged for years. There is no way the caps had any charge left. I should've added a disclaimer for everyone else though
I love your bench mounted bandsaw
LOL Heirloom spot welder. omg, that's amazing.
Congrats on being featured by HAD!
I like how it's called the 'Zip-Zap' yet looks like a professional modern but tasteful well made box haha.
People who can create both software and hardware will rule the future world.
Nice methods and solutions on the box. I can see I am going to have to watch more of your videos.
I don't even care about what you are building, I'm here for the famous commentary!!
You’ll need a fan in there! Will get mighty hot over a day working! 🔥
Barbeque taser, my new most favorite phrase
The joy of making useful tools, I also enjoy making tools by myself instead of buying them if I can make that happen, so thanks to you for that, I have all the necessary parts and going to start as soon.
Any time I hear microwave transformer, I get incredibly nervous! Looks like you did a great job, and didn't hurt yourself (at least that you've shown on video!)
Microwave transformers rock. Lichtenberg burning!
Man, Can you believe his patience and attention to detail. Incredible. truly Incredible.
some youtube videos I can walk away and listen while I go grab something from another room.
here, as soon as I do that, there's a childish giggle and i have to finish what I'm doing, come back, and rewind to see Robert knock half a transformer off with a chisel.
You are fun to watch and clear to understand. Congratulations 👍
I think that it's great that you show your mistakes, makes your videos more enjoyable to watch knowing you're human like most of us! Plus I learn best from making mistakes! Keep up the good work!
10:14 sounds like the intro to an 80's song
"I made a Battery Spot Welder..." - How big of a battery is needed to run a spot welde.... oh, nevermind. That makes more sense!
Actually that is a thing too, and since the pulses are short, the battery doesn't have to be thaaat big. It's cool. Look up kerpu mini on Amazon, it's basically just a big USB battery bank with spot welder leads
I forgot you mentioned this channel. I only found it on this video when watching videos on batteries. Now I get to hear you talk about more stuff. I don't know why but I enjoy your style of videos.
I had no idea you were a professional level wood worker. Fantastic work!
This was fun to watch. Don’t know why. My medication may need adjustments.
Mad scientist woodworking!
This must be one of the most terrifying things I've ever seen you do! :) ++applause++
Great content. I specially liked the notice at the end saying that the most important thing is the spot welder itself, and not the fancy box and all the tools needed to build it.
People often do not make difference between a RUclips channel and real life.
Cutting out the box joints reminded me of the song Doubt by Delphic
Also, brushed vacuum headers for CNC machines don't last all that long and don't look nice for most of their life cycle.
When they get all messed up just replace them with stiff enough silicone sheets spliced near the bottom - works perfectly and stays decent for years.
Oh man, this is giving me flashbacks. I used to work at Batteries Plus store, and we would rebuild battery packs for customers. Most of the time it was things like odd drill pack batteries which are just a bunch of Sub-C's spot welded together. Our machine had a foot lever lever that that would lower the probe and trigger it; I swear it had a bicycle pedal on it. I don't know why, but there was some finesse to it, if you pressed down too hard you would "pop" the weld. You're set up with the trigger looks much easier!
I'm so glad he didn't over engineer the case or anything else in his build! xD Glad it worked and that his wife got a new microwave.
That's not a given.....
Combination of electrical interest and woodworking. Man after my own heart. Subscribed!
As a longtime software engineer and an advocate for removing code biggotry from dev teams 6:59 had me laughing my ass off, so well put.
I included code for a project submitted to hackaday once.
Never again.
@@TheAwfulInternet That's really sad, it's such a horrible experience for people like yourself. I've got absolutely no time for devs that have a code superiority complex, it's got many business' into hot water too.
With a program like VCarve or Aspire, you can easily CNC parts from 3D printer models. There is no reason your handle or button grip should not be a matching wood for your case.
I was thinking he could have cut his box parts and joints using the CNC as well.
Fusion 360 would do the same job, and Robert's clearly familiar with the software.
I was also thinking that he (you, Robert) could've designed his circuit in Fusion 360 and had a PCB made especially for the spot welder, all within Fusion 360. Then it would've been COMPLETELY OTT.
@@tomconway6808 It's hard to cut square corners with a spinning router bit, so there would be a lot of hand-finishing to make the two sides of the boxjoint interface correctly (unless he also applied a corresponding convex 3d profile to the fingers of the boxjoint).
@@EmyrDerfel Oh duh right.
Well I think some of the better electric cars you have sitting around are going to get functional better battery upgrades soon and you have a cool new toy to do it with, a win win in my book. Wish I'd watched this sooner but glad I finally did, that was fun to watch and maybe you get a microwave upgrade 😉👍
You are one clever bastard. Well done.
As an ex-Yugoslavian ... that Yugo logo :D ... props
I don't know if I've watched too much of these, but my first reaction when I saw the box-joint jig was a "did he mess this up".
I know this is pure torture, but I'd like you to know that "twas was for naught" as some twisted person half-way around the got a hefty chuckle out of this and the first smile of the day :D
I short, a humble thank you!
wow, that enclosure is seriously professional looking, except more stylish! i love it!
I guess that "modern man" has forgotten the special digits that form a magical number: 555
All that hardware and programming, for a simple pulse?
A potentiometer, with a dial that you calibrate, two capacitors, a couple of resistors, a potentiometer, and a 555...
to learn enough arduino to fabricobble your ideas in to reality is in general way easier that analogue circuitry. of course the analogue solution is way more elegant but i think it's great that people can make shit without much barrier of entry. also he can update functionality of this device with software updates.
Well, if you hadn't gone that fancy with the woodworking, then you couldn't have posted it to your woodworking channel! I love it, what a great device you made and you survived to upload the tale!
thx for talking about the simplification of it like not needing arduino and stuff
Can't wait to hear you merge CNC router, the router table, drill, and brad nailer into a rhythmic symphony. Great job!
"and this other box"
*proceeds to lay down a sick beat*
Thank you for the code. Love the clever wit.
I appreciate you making videos like this mr Dunn. I love watching them.
You are absolutely correct having it work the first time is an amazing feeling. Nicely done!
This guy really reminds me of this one car guy I used to watch. But idk can't be him. No school bus parts in the background
If you want to go Super Fancy with your power cords, you can get IEC power cord (think "computer power cord") receptacles off of a bunch of different things, and the hole shape is cad file is easy to find.
"That should be PLENTY for spot welding. . . and killing someone." Love it =).
Unfortunately or perhaps fortunately it would not kill you. That is the maximum output current, the current you get depends on the resistance between the electrodes, and at a resistant level like human skin, it would be like a 2.2-volt battery. Touching both ends of the lithium-ion cells it will be welding will expose you to a 3.7volt so higher current. You would get a tinkle of you let it touch your tongue where the resistance is lower.
The best way to kill someone with the transformer is to put them in contact with the 120V side or just hit them in the head with it. If
Now that was cool. :)
An awesome spot welder project, LOVE IT Rob!
Super super nice episode !! Here you get different elements, such as electronics, some data coding, welding current, and wood work. Stop saying you're an idiot, because you are not. I look forward to more such episodes, it's fun and you are very skilled, and now I have to work on my own projects... .. and as before, fantastic video editing!
Nice. I didn’t see a fuse in there. Hope ya got one! I’d feel bad if I didn’t say anything
This was an epic video because the first part is ripping apart appliances, then we learn about Transformers/magnetism/induction theory(sort of), then we learn programming/electronics and finally we get to do custom wood working 😂😂 You've basically described my garage in a nutshell. 😊😊👍👍
CNC, 3D printing. This is getting fancy! Have fun with the welder!
Microwave parts can be used to build spot welders, BBQ tazers and Stargates.
Idea you can use* for merch, in shirt form, for ease of explaining:
top line: "The Main"
line 2: "Component"
picture of the rewired transformer
line 3: "Of The"
line 4: "Barbecue"
line 5: "Taser"
I hope you still have the remains of that microwave. There are a couple of pretty good magnets in there that you can salvage.
Turntables can be fun for photography or other projects too.
Plus some microswitches that would work well for a foot pedal.
Loved the show wicked build from mostly scrap
👍👍👍😜🏴🦕🙂🤞✌
that box was more work than the welder itself but what a beautiful welder box this is!