Thanks to show your good work, but this all simulation i found in the stationery object, can you please make tutorial video of Flow Simulation in the rotating object, in short Fluid behavior under the rotating object, object such like, square tank rotating on its shaft mounted on the center Thanks
Hi, I want to find out Fan rotational speed according to Wind! how can i simulate this problem? I have a blade under the influence of wind and i want to know it's rotational speed. thank you
To turn the solid bodies created by the surface cut mentioned in this video into Water and/or Air do the following. 1. Right Click "Initial Conditions" in the Flow Feature Tree and click "Insert Initional Condition." 2. Click on the Air or Water body. You will see if show up in the Selection box and highlight blue in the graphics window. 3. Check the "Disable solid components" check box. 4. Set the "Substance Concentrations" drop down menu to Water if you are specifying the Water body or Air if you are specifying the Air body. 5. Click the green check mark and you are done with that body now follow the same workflow for the other body.
![Eminem - Somebody Save Me (feat. Jelly Roll) [Official Music Video]](http://i.ytimg.com/vi/Vwa0HenQMi4/mqdefault.jpg)
Hello, nice tutorial. Why the water level has not changed? When will the water drain?
Thanks to show your good work, but this all simulation i found in the stationery object, can you please make tutorial video of Flow Simulation in the rotating object, in short Fluid behavior under the rotating object, object such like, square tank rotating on its shaft mounted on the center
Thanks
Thanks you for your video, It's very interested me!!!
I want to study about Liquid turn to air? Is it this video show that? Could you guide for me?
Hi, I want to find out Fan rotational speed according to Wind! how can i simulate this problem? I have a blade under the influence of wind and i want to know it's rotational speed. thank you
How to create Fluid sub body and after surface cut
To turn the solid bodies created by the surface cut mentioned in this video into Water and/or Air do the following.
1. Right Click "Initial Conditions" in the Flow Feature Tree and click "Insert Initional Condition."
2. Click on the Air or Water body. You will see if show up in the Selection box and highlight blue in the graphics window.
3. Check the "Disable solid components" check box.
4. Set the "Substance Concentrations" drop down menu to Water if you are specifying the Water body or Air if you are specifying the Air body.
5. Click the green check mark and you are done with that body now follow the same workflow for the other body.
good
Great feature ! Can we include multiple fluid inside the control volume?
Hi Salah,
Yes, multiple fluids can be included in the fluid domain.
GoEngineer thanks for your reply! Another question, this feature consider the mass transfer (intermixing) ?
Salah,
You will have to expound on what you mean. This short description does not explain what you are looking to find.
Can you do a video about the noise prediction feature?
We will get this suggestion in front of our content creation team. Thanks for watching.
cad files and simulation files
can you upload
Hi Hüseyin,
We do not maintain copies of the files used in these videos so I do not have anything to send to you for this.