Build BTS-2 ARV in scale 1/8. Собираем модель тягача БТС-2 в масштабе 1/8. forum.rcdesign.... www.parkflyer.r... www.parkflyer.r... Clint Mansell - Requiem For A Dream
How can anyone give this a thumbs down. The amount of work alone deserves a thumbs up. And your attention to detail is amazing. Very inspiring. Thanks for sharing this.
I am in awe........I just need to lay down all my tools and quit the rc game. That was simply amazing. This craftsman is a true artist and I can't show enough respect. My hat is off to you. Please don't mind the bloody flesh in the back of my head because that is evidence that my mind is blown. Awesome.
Great craftsmanship!And what a coincidence the music from Requiem for a Dream, just discussed this movie yesterday for the first time in many years. Best greetings from Holland
I had a feeling this guy was Russian then I saw on the engines he marked left and right and the Russian language and then I knew this was Russian engineering at the best great job buddy молодец
and your two motors seem to be fixed/ connected together on the same drive pinion gear, am I correct? So there is just two motors for power, it would have been possible to use one large motor, correct?
All right, two motors rotate one gear. First there was one big motor, but its power was not enough. And I had to make another drive scheme. ruclips.net/video/TbZ83lcwtEE/видео.html
my "craftsmanship" comment I posted when I was not even halfway through the video. The second part: Wow. Mind blown. Btw, on my channel there is an animation of the Cletrac differential steering system.
Yes, it's a very effective system. I Always like simple ingenious stuff! I had to make the animation because it wasn't there on the Internet. This "Cletrac" system has been used a lot, probably there are still tracked vehicles being built new using it. Nice thing is that the vehicle doesn't reduce power to the two shafts conbined (one slows down, the other speeds up) -- they call this "regenerative". The invention is almost 100 years old.
I am working on my Tamiya Gepard... I already made a custom "dual motor" gearbox many years ago, which works fine but I would like to do a redesign. I am looking into brushless "outrunner" high torque motors along with LiPo battery. Although cost may be prohibitive. I will post a video on this gearbox soon.
+dubok78 this is ok for me. now how can make it turn. I remote control system that can only back and forth, I thinking of a clutch control on both motors
the guy with a laser cutter calls it home made.... we need to start coining a new word for people who have a home lab! I have a home lab but do not have a laser cutter.. I have a CNC machine but would not call anything I made in my hobby "HOMEMADE" Homemade implies common tools and cutters plotter, cnc, laser cutter, and 3d printers are not exactly common place just yet... Other htan that, great job...
Everything they made here can be made with hand tools, it would take years instead of months to make but can be done. It was just accelerated due to higher efficiency tools.
I read from the "forum" that you lasercut these "thin metal plates" that you attach by soldering...do you have this equipment at home or work or something...i was just wondering, could you make some company make em for you?
How can anyone give this a thumbs down. The amount of work alone deserves a thumbs up. And your attention to detail is amazing. Very inspiring. Thanks for sharing this.
I am in awe........I just need to lay down all my tools and quit the rc game. That was simply amazing. This craftsman is a true artist and I can't show enough respect. My hat is off to you. Please don't mind the bloody flesh in the back of my head because that is evidence that my mind is blown. Awesome.
Thank you for your comment. I am pleased to hear that you liked our project.
Автору- Уважение! Следил за проектом на "дизайне".. PS музыка-эпик))
Pure genius, beautiful workmanship!
Pure determination with the simple tools create a masterpiece.👍👍👍
Thanks
Amazing. Saying dedication doesnt do it justice.
The amount of work that went into that ! Amazing, top class.
Great craftsmanship!And what a coincidence the music from Requiem for a Dream, just discussed this movie yesterday for the first time in many years. Best greetings from Holland
Thank you.
Brilliant work,well done. Excellent craftsmanship.
Вот это я называю профи......стандартная т55 была б интерестнее, в плане конструкторских решений автора. Но то что он сделал....это божественно!
Андрей Омельченко Т-55 будет на этом шасси, сейчас над ним работаю. Ожидайте.
Ждем с нетерпением)
Андрей Омельченко
ruclips.net/video/t2ZAk3pkeq0/видео.html
ecveff
Very impressive Work man! Respekt and greetings from Germany!
Made your own Christie suspension. Nice.
Hi guy, this is really amazing. You are very talented. Great built. But next time build a King Tiger
Awesome! Very talented and passionate. 10/10.
Excellent craftsmanship, , beautiful job.....
Are you a machinist ?? My goodness your amazing with every substance known to man !! LOVE, I wanna have a beer with you !!!
grant fletcher By specialty mechanic-repairman.
unreal I tried this and failed you are the genius that I tried to be. thank you for showing me what it should have looked like.🈲
Well done my friend, nicely built, looks great, a credit to you
Bravo! Beautifully built.
I haven't watched the video yet (at work now) and I had to subscribe! This is gonna be good!!
Nice work, two thumbs up.
PERFECT JOB. I like people like you.
You are an artist!
You did a really good job on this !
thank you
Супер!!!
Wow! So impresive, beautiful job
Impressive build dude !
nice idea with bike brakes,great job
I had a feeling this guy was Russian then I saw on the engines he marked left and right and the Russian language and then I knew this was Russian engineering at the best great job buddy молодец
Thank you, I live in Ukraine. For this reason, all the inscriptions are in Russian.
Really beautiful work.
Amazing build!
You got skils, bravo
+pumba matata sick+
TOP MODELL !!!!!!! Grat JOB 👍👍👍👍👍👍👍😎😎😎😎
absolutly impressive!
Классно сделано. Особенно гусеницы понравились. Хотелось бы подробнее узнать о них.
forum.rcdesign.ru/f99/thread336584.html#post4524494
Thats so cool man!
This is just amazing man...
Nice work! I like doing similar stuff.
Magnífico, nota 10
you are the ONE
great job
excellent work, tracks are very nice. how is my wooden tank home made rc tank
Good work very creative.
Woow better than a plastic!
Hi this is the best build whit simpel material i hawe seen fantastic work....
You are the real deal ;)
Do you seal this?
Thank U.
The model is completely sealed. All joints are taped and impregnated with an epoxy resin on the outside.
Great work and good ideas.
just amazing
Congratulation !! That's amazing !!
amazing work... great job
OMG THAT WAS GREATTTTT 👍👍👍💙💙
very impressive work :)
Great Work
Insine wormanship keep it up mate.
Amazing! Really awesome work! Any videos of it driving??
BTS-2 ARV rc
Nice job!!
Dobra robota!
truely amazing
Трябваше корпуса да е от Метал а не от Дърво. Но като цяло СТРАХОТНА РАБОТА, БРАВО.
really nice work .)
Thank God for 3d printers.
aweosome build :)
👍
Nice build can you show how to make this gearboks
Awesome!!!!
and your two motors seem to be fixed/ connected together on the same drive pinion gear, am I correct? So there is just two motors for power, it would have been possible to use one large motor, correct?
All right, two motors rotate one gear.
First there was one big motor, but its power was not enough. And I had to make another drive scheme.
ruclips.net/video/TbZ83lcwtEE/видео.html
my "craftsmanship" comment I posted when I was not even halfway through the video. The second part: Wow. Mind blown. Btw, on my channel there is an animation of the Cletrac differential steering system.
I decided to do just such a scheme with a differential, it is simple and cheap (relatively).
Yes, it's a very effective system. I Always like simple ingenious stuff! I had to make the animation because it wasn't there on the Internet. This "Cletrac" system has been used a lot, probably there are still tracked vehicles being built new using it. Nice thing is that the vehicle doesn't reduce power to the two shafts conbined (one slows down, the other speeds up) -- they call this "regenerative". The invention is almost 100 years old.
I am working on my Tamiya Gepard... I already made a custom "dual motor" gearbox many years ago, which works fine but I would like to do a redesign. I am looking into brushless "outrunner" high torque motors along with LiPo battery. Although cost may be prohibitive. I will post a video on this gearbox soon.
great jjob !!
brilliant
wow !
Love the tracks.Where did you buy the hinges?
We sell the loop in hardware stores and market tool.
Amazing advice. Can build AVLB?
Thanks. There will be no construction of a bridge spreader.
good job i built one to where can i get a sound generator from
could you show the detail the size of it
Cool.... ;)
bomba .. :)
nice !!!!!!!1
Waw !
Ya know this is youtube made for videos not slide shows I really don't like tutorials that are slide shows
lol its not even a tutorial, its a compilation of images showing how he made a tank
how can you show it without pic??
Brian Bo Jensen Your question is extremely stupid, you should not ask such questions. Are you fat?
No i am not fat? Why do you ask?
+hillbailey shooterboy Then you make a better one dumbass.I'm surprised you even knew how to login...
Easy; buy one.
very nice, but no turret? :(
Turret was the first tractor on the samples, and the Polish machines, and in the military part of the USSR tractor was no gun.
Kinda was hoping you of tested it at least
ruclips.net/video/qLj7mdVATSs/видео.html
wow nice work
gr tiger 181
i want to make once
how did u make the tracks I am making a t34 and a tiger 1 that all I am stuck on is the tracks
Detailed production can be found here
forum.rcdesign.ru/f99/thread336584.html#post4524494
Hey I mack it Now How i Bild Rc on This Tank
is that T-54?
uuum can you make a simpler one. I only two small motors and a big motor which I got from a fountain
On other models made the way you want.
postimg.org/gallery/2ozk6df2/
+dubok78 this is ok for me. now how can make it turn. I remote control system that can only back and forth, I thinking of a clutch control on both motors
Rotation is controlled reduction of the number of revolutions of the motor, it requires DC regulator.
the guy with a laser cutter calls it home made....
we need to start coining a new word for people who have a home lab!
I have a home lab but do not have a laser cutter.. I have a CNC machine but would not call anything I made in my hobby "HOMEMADE"
Homemade implies common tools and cutters plotter, cnc, laser cutter, and 3d printers are not exactly common place just yet...
Other htan that, great job...
to me homemade implies made at home and in no way alludes to lack of tools, skills, or advanced methods of making said item.
Everything they made here can be made with hand tools, it would take years instead of months to make but can be done. It was just accelerated due to higher efficiency tools.
but how can i make the belts??
eto shikarnoooooooooooooooooooooo!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
How much money have you spent for that items, for whole tank?
Construction of the model without electronics $ 800-850
dubok78 so I see you made these little metal parts yourself? did you use some kind of spot welding? I would like to know...and really nice job indeed
SamD Detailing is made of a thin metal plate, attached by soldering.
The central ridge on the caterpillar is fixed by welding with argon.
oh i see...thanks for the response!
I read from the "forum" that you lasercut these "thin metal plates" that you attach by soldering...do you have this equipment at home or work or something...i was just wondering, could you make some company make em for you?
what wood did you make this out of. balsa
The model is made of plywood.
Ok thanks
What is the music called? I like it
Clint Mansell - Requiem For A Dream
this music is unconfortable...
Michał Bulczak Yeah, and its called Darude - Sandstorm
How long did this take to build?
matthew connor This model has collected about two years. Done in parallel with other models of tanks. If you build only one tank, it takes 6-7 months.
Ok
wait a miniut. . . Slender!?
Doo you make on order?
No.
Нет слов, одни междометия!))))) У автора руки не золотые а, наверное, платиновые)))
Спасибо, но руки обычные, как у всех :)
why dit the music make me cry????
Henk Beenen I do not know.
Watch the movie Requiem for a dream, you'll cry again.
What's this song?
Hunter Meadows Clint Mansell - Requiem For A Dream
This is Pakistani music