Good teacher, your organized workshop and reassebly us a mirror image of the way i work ,46 years doing a 2E head now /snapped cambelt only broke no 11 rocker/small inlet valve,it was a good point when you mentioned that rear pipe on drivers side for the cooling system and to make sure nothing is trapped in that area when you put the head on ,great video, i taught 3 apprentices.
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE.
Thank you very much, you gave me some great instructions, I have to change crank seal. Im not ready to take engine apart, will leave that to a professional
Thanks for the content, my Tazz has the same problem within the cylinder the rockers are breaking last time I took it the service I had to pay 6k for that whole part and the whole thing wasn't fixed.. If only I knew I could've sent it to you..
Good day brother.... What is the torque settings for the 2E head...... And also the valve clearance for the tappets please..... Im tackling this project today
You probably gona respond when im done with the job lol..... But it sounded like u said 29Nm + 90°>>>>> but thanks for the great video of timing marks also.... Gona finish coz car must be finished today
Hi. Does a head gasket sealer really work? My car has symptoms of a blown gasket, white smoke, steam and it once overheated! The oil is still ok, it not mixed with water. The car Mazda 1.3 B3.
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE.
my 2e corolla doesn't have one, alot of people say to remove it coz when that thing fails in the close position and you dont have any tools at the side of the road then youre in big trouble, my fan also runs with key on the ON position, the temp sender unit and fan switch stopped working when it came from backyard mechanic, I replaced the sender unit but I just unplugged the fan switch
I had my cylinder head done at the engineer no taped was set after setting the tapeta and starting the tapeta has a big nok sound what is the the problem
Uncle Gary, I know you shouldn't but in your experience, how many times can you reuse stretch bolts before you should start getting worried wbout them breaking?
1st stage - 29nm 2nd stage - 49nm 3rd stage - 90 degrees inlet (hot) .20mm exhaust(hot).20mm best of luck Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE
I am in Cape Town. Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you. Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA, It is FREE.
Good teacher, your organized workshop and reassebly us a mirror image of the way i work ,46 years doing a 2E head now /snapped cambelt only broke no 11 rocker/small inlet valve,it was a good point when you mentioned that rear pipe on drivers side for the cooling system and to make sure nothing is trapped in that area when you put the head on ,great video, i taught 3 apprentices.
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
It is FREE.
Great job Mr G i always appreciat your work thanks for always helping us👌
Thank you very much, you gave me some great instructions, I have to change crank seal. Im not ready to take engine apart, will leave that to a professional
Some jobs are better left to experienced pro's Len agreed, if one lacks confidence for the bigger jobs.
Thanks for the content, my Tazz has the same problem within the cylinder the rockers are breaking last time I took it the service I had to pay 6k for that whole part and the whole thing wasn't fixed.. If only I knew I could've sent it to you..
Good day brother.... What is the torque settings for the 2E head...... And also the valve clearance for the tappets please..... Im tackling this project today
You probably gona respond when im done with the job lol..... But it sounded like u said 29Nm + 90°>>>>> but thanks for the great video of timing marks also.... Gona finish coz car must be finished today
Hi. Does a head gasket sealer really work? My car has symptoms of a blown gasket, white smoke, steam and it once overheated! The oil is still ok, it not mixed with water. The car Mazda 1.3 B3.
Did you replace the cylinder head or did you just clean it?
Cleaned it up
Thanks for great vid.
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
It is FREE.
My cam snapped so will my valve b bent sir ? Or can i jus replace cam
Best in the game 👍👍🙌 I'd you with any vehicle I own
Really great work
Thanks for the support and kind words Mus, appreciated.
great job sir please explain more about setting the tappets
It is explained in this video from 14:48 to 19:31
Hello there
Did you install a new thermostat
my 2e corolla doesn't have one, alot of people say to remove it coz when that thing fails in the close position and you dont have any tools at the side of the road then youre in big trouble, my fan also runs with key on the ON position, the temp sender unit and fan switch stopped working when it came from backyard mechanic, I replaced the sender unit but I just unplugged the fan switch
@@jaars911 that's why you install original or oe quality parts and have a good mechanic who can tell when your thermostat is about to give up
Hi what kind of a camera do you use when both your hands are free
Hi Dana, I am using a GoPro 4 Silver with a chest strap, that frees up my hands.
I had my cylinder head done at the engineer no taped was set after setting the tapeta and starting the tapeta has a big nok sound what is the the problem
Set the tappets and see if the knocking goes away if not you may have a bearing knock.
Uncle Gary, I know you shouldn't but in your experience, how many times can you reuse stretch bolts before you should start getting worried wbout them breaking?
The rule says new head gasket new bolts using stretched bolts i dont think can have guarantee
1st stage - 29nm
2nd stage - 49nm
3rd stage - 90 degrees
inlet (hot) .20mm exhaust(hot).20mm
best of luck
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
It is FREE
hello l'ami , je vois sur ta vidéo que tu fais un réglage de soupapes a froid ,quel jeux mets tu a l'admission et l'échappement . cordialement
intake .30mm exhaust .30mm (cold), when run hot I reset to intake .20mm exhaust .20mm
@@vehiclemaintenanceandrepai3790 merci l'ami pour l'info
@@marcmittler2375 A great pleasure, all the best to you going forward.
Hi mr G can you maybe sent your location for me pls I've got big problems with my tazz pls
I am in Cape Town.
Thank You for supporting my channel with your visit and interaction, I am pleased this video was helpful to you.
Please feel free to check out the rest of my channel by clicking PLAYLISTS www.youtube.com/@vehiclemaintenanceandrepai3790/playlists for more helpful service and repair videos on most makes of cars available here in SOUTH AFRICA,
It is FREE.
Como,se,desaoma,una,caja,de,Optra,tapa,amarilla
again thanks
Como,se, desalma una caja de Optra tapa amarilla
Thank you.
I had my cylinder head don
Great.