Thanks for all the amazing feedback and glad I could help so many of you out! I recently switched it up a bit 👀 Check out my new setup here 👉🏼 ruclips.net/video/O73OHOKuIi4/видео.html
That's the perfect setup I want to do to my 2020 sierra. It's not to wide but just enough stance for me. Simple and clean is what I'm looking for and you just confirmed it for me. Clean truck man
Love the look dude. This is exactly what I'm looking for, not looking for anything more than 35" tires and I don't want a big lift. My trail boss is also my daily too.
Just finished installing the Pro Comp 2.25 leveling kit. Took me 6 hours altogether. Now comes the fun part of getting some tires and rims like yours. Great video.
I purchased a 2 inch rough country leveling kit for our 2020 rst. It's scheduled to go under the knife on Thursday and after see this let's just say I'm excited 😁
Man I definitely would have went with chrome wheels to match that front end. I have a 21 LT Trail Boss and love the color matched front end on my truck but damn that chrome actually looks good. Its weird because I am usually not a fan of chrome.. Looks good tho!
Good video. Just got a 2019 gmc sierra. Ordered my leveling kit and spacers now. Hopefully order wheels and tires soon. Debating between 18 or 20 wheel though still
I love ur truck I just got 2021 gmc 5.3 x31 4x4 but I wanted the newest heavy that has that grill they didn’t have it ima copy ur specs on ur wheels though so ima save this video good video man
I’m about to do this same set up on my 2021 Chevy Silverado I was wondering how did your gas mileage change from stock after you put the lift and the wheels on?
If I may ask, where can I get the front end style like yours? I have a reg 2020 LT Silverado and I just fell in love with how yours looks. Sweet truck and thank you for helping me decide on the stance I want for my beauty!
I got the same set up by any chance does your passenger rear tire stick out more then the driver rear I notice my tire sticks out about a 1/2 inch wider
Love the truck. I have a 2020 RST that I'm looking to do the same to. 2 questions. Did you have to trim any metal to make these fit or just plastic? Did any of this void your factory warranty?
Adam AC Woodworking had to trim plastic liner not any metal. As far as the warranty goes, it should not void anything outside of maybe your control arms since “technically” you’re modifying the angles by installing the leveling kit, but to be honest it isn’t anything crazy with the angles or wheels that I am running, so it shouldn’t cause any major issues down the line. Factory tires are ~32” so I only went up about 1” in tire size and only came up 2” in the front so the angles should be fine and not cause any crazy stress on my ball joints or cv axles. Now I’ve seen some people running 22x12s and that would be a major stress on stock components. My point is, I honestly don’t know if it voided the warranty but even if it did I’m not concerned. It would only void the parts affected by the mods. Everything else is still covered.
So, the 33’s doesn’t fit at all? My trail boss came with 275/60r20. I really like the aggressive look, but I refuse to put leveling kit or lift my truck since I’m a short guy. I got depressed after seeing this video, but sweet ride, man.
Do the LTZ & RST have the same stock Suspension? I just bought my first truck RST, & I’m looking for this wheel setup for past week, but this video you uploaded really reassured me & let me see how they would actually sit on the truck. But was not sure if the LTZ or RST has same suspension from factory? I know the Trail Boss has the lift from factory but not sure about LTZ
Very nice! I have the same truck with the factory blacked out logo and emblems. How did you remove the badges on the tailgate without scratching the paint?
I used some fishing line, heat gun, and a 3M magic eraser. Hit the badges with a heatgun very lightly just to loosen the glue up, otherwise can melt the clear coat. Then take fishing wire and run it behind the badges. Then take the 3M magic eraser to remove the residue and you’re good to go
Beaut bow tie! I just bought my 2021 same color and your look is what I’m going for as well, how do you like your vent visors on it? I’ve always had them on my other trucks & haven’t decided if I’m going to put them on (I love in channel weather tech’s vent visors, they’re great, I have my weather tech floor mats arriving tomorrow so I’m excited about those. Do you have a link for your tires you bought? Just curious. Thanks for walking around & showing your bow tie
Thanks! I love the vent visors and I have the EGR In-channel visors. As for tires, I got them on eBay.. they are the Venom Power Terra Hunter XT in size 33x12.50r20
Great looking truck! I have a 2020 RST and want to do a 2" level but worried the back will look lower. My front seems to be only 1 1/4 lower than the back. Did you measure before you installed the kit? If so what was the difference before ? Thanks
I got a ‘19 Silverado RST with the same size wheels and tires. Custom offsets told me to get a 3/8 spacer but are hard to find. Does any other size spacer work. Like a 1/4 or 1/2 inch?
With 12.5 wide tires how close are the tires to the UCA? I just bought 33/12.5/20 for my stock 20.9 wheels. My truck is leveled with the Eibach pro lift kit
1/4”. I did not initially plan to run the spacers but I had to for the rim to clear the brake caliper. Did a quick google search and found some. www.americantrucks.com/coyote-silverado-14-inch-wheel-spacers-911130.html
Is that the diesel? If so what kind of MPG are you getting with set up. I’m on the verge of buying a 21 diesel 4x4 now and was curious what happens to MPG after bigger tires
How are those tires holding up? I’ve bought cheap knock offs before and told myself I’d never do it again. I want to go with the BFG a/t 2’s but they are over $400 a tire! Crazy!
truck looks great im planning to the same set up to my 19 i also drive my daily, so i dont want that off road sound inside thw truck lol , what tires are u using thanks
Just used a standard 2” rough country level. That’s all. Maybe you installed something wrong is the only thing I can think of because I have had zero issues rides like stock
Yes I’m sure there is. However the calipers are so large in the front (they’re 4 piston) that most wheels require a 1/4” spacer at least. There has been no issues with me running them. Rides smooth as stock.
Rides like factory and no I didn’t need to upgrade them. 33s on 20x10s isn’t anything super aggressive. If you go 35s or 12 wides then I would upgrade them.
What exactly did you cut out at the back of the wheel well, I have a 2020 Sierra sle 1500 I know the wheel wells are a little different, I have 20x10 -18 fuel blitz with bf Goodrich ko2 ats with a leveling kit and it rubs really bad in that spot you cut out, I’m gonna have to do the same thing
Kevyn, I'm going to be running the same setup as you but I'll have the 3.5 rc lift, did you have to put spacers on those rims, I'll have the same setup
I’ve laser measured in my garage which is perfectly flat ground and I am 3’ 4” from the ground from each wheel well. However I can kinda see it but I only go off what the laser measure says so it’s level to me
They’re great. Coming up on 5k miles and getting my first rotate / balance since install. No uneven wear that I can see. Ride super smooth and perform very well for a daily tire. Also very good in wet conditions, feel very planted. Slight hum at 50+ mph but that’s to be expected. I love the aggressive, yet moderate hybrid design. You can’t beat these for the price and honesty they’re riding just as good as my BFG KO2s I had before these which are double the price! I will be getting these again.
@@bradtswims I’ve had nothing but issues with balancing after about 8k miles on the same set of tires. They were great up until then. Just swapped mine out for Toyo AT2’s. Just couldn’t handle the bouncing. Hope you have better luck with yours friend. Nice set up btw.
@@JC-th2rl sorry to hear that man. I’m right around the 8k-ish mark and just had them rotated and balanced. They are still riding good for me. Maybe you got a bad set
Rides just like factory. Only thing is the tires have a little more road noise but that is to be expected with a more aggressive tread pattern. It’s barley even noticeable. Rides amazing
Wish I could say the same for the darn 8 speed. Mine has those shuddering and hard shift issues. They put the blue transmission fluid and it helped the shuddering go away, but still shifts hard at times.
Thanks for all the amazing feedback and glad I could help so many of you out! I recently switched it up a bit 👀 Check out my new setup here 👉🏼 ruclips.net/video/O73OHOKuIi4/видео.html
This is exactly what I was looking for to set my 2019 up!!! Thx man!
That's the perfect setup I want to do to my 2020 sierra. It's not to wide but just enough stance for me. Simple and clean is what I'm looking for and you just confirmed it for me. Clean truck man
Awesome! Glad I could help. Clean & simple is the way to go 👍🏼
This is what ive been looking for my 19 silverado!!!!! My man!!! Thanks!!!!!
Perfect rims and set kits for everyday drive. I love it and it did help with my decision.
Yes it is perfect for daily driving! Glad it helped with your decision.
Love the look dude. This is exactly what I'm looking for, not looking for anything more than 35" tires and I don't want a big lift. My trail boss is also my daily too.
Pretty much same as my 2019 and I love it. No rubbing ethier.
Saludos desde México Veracruz está divina esa camioneta 😍
Just finished installing the Pro Comp 2.25 leveling kit. Took me 6 hours altogether. Now comes the fun part of getting some tires and rims like yours. Great video.
Post a video of your truck when you get your wheels and tires on!
Yup I’m in the same process with my gmc 2021 Thursday will level it then comes wheels happy
Looks good. This is the exact look that I want.
Clean simple but sharp nice job
Almost identical to my truck… didn’t realize how good it looks!
Nice dude. Truck looks great and thanks for sharing your specs.
I like it! Sweet set up!
I think the chrome looks prefect with that grey! I’ve got one in north sky blue but that grey just looks better lol.
Looks real good man! 👍🏼
CLEAN! Thanks for sharing
Great set up 👍
Nice look! By any chance did you add any spacers behind the wheels? I heard some rims get hung up one the brake calipers.
Looks awesome man
Mines as scrubbing too have the same set up looks nice definitely have to do a little cutting
Perfect look!
Thanks!
super clean!
Looks amazing great job I’m gone do the same on my 2020 1500. Keep up the great videos
Thanks man!
@@bradtswims hey how is the road noise with those venoms powers?
@@colombia596 not too bad at all, there is a slight hum but that’s to be expected.
I purchased a 2 inch rough country leveling kit for our 2020 rst. It's scheduled to go under the knife on Thursday and after see this let's just say I'm excited 😁
TheRenegadeBad_Dog great choice! You’re gonna love it
Any update just got the rest want to do a 2in on it?
Steve Meyers Do the 2”. It’ll level it perfectly
That’s the look I want. Looks nice
Thanks for info truck look amazing 👍
Love that look and good video.
Looks good man
Looks awesome!
Thank you!
Man I definitely would have went with chrome wheels to match that front end. I have a 21 LT Trail Boss and love the color matched front end on my truck but damn that chrome actually looks good. Its weird because I am usually not a fan of chrome.. Looks good tho!
Nice truck!
Good video. Just got a 2019 gmc sierra. Ordered my leveling kit and spacers now. Hopefully order wheels and tires soon. Debating between 18 or 20 wheel though still
Looks good 👍
I love ur truck I just got 2021 gmc 5.3 x31 4x4 but I wanted the newest heavy that has that grill they didn’t have it ima copy ur specs on ur wheels though so ima save this video good video man
That stance though nice truck
Looks great
what brand of spacer did you use I want to do the same with my truck your truck is very nice thank you
Did you have to remove bracket on the inside/bck part of your front wheel well?
Great looking truck! Are those wheels heavier than stock wheels including tires, just curious. Thanks in advance.
I’m about to do this same set up on my 2021 Chevy Silverado I was wondering how did your gas mileage change from stock after you put the lift and the wheels on?
Good looking truck. About as much as I’d do to my Denali
Thanks man, I love the Denali’s.
Can you run 20x10s with 33'' tires without the leveling kit? (I have the same vehicle)
Love it 😍
If I may ask, where can I get the front end style like yours? I have a reg 2020 LT Silverado and I just fell in love with how yours looks. Sweet truck and thank you for helping me decide on the stance I want for my beauty!
The front end style changes based upon trim levels. This is the LTZ.
I got the same set up by any chance does your passenger rear tire stick out more then the driver rear I notice my tire sticks out about a 1/2 inch wider
Love the truck. I have a 2020 RST that I'm looking to do the same to. 2 questions. Did you have to trim any metal to make these fit or just plastic? Did any of this void your factory warranty?
Adam AC Woodworking had to trim plastic liner not any metal.
As far as the warranty goes, it should not void anything outside of maybe your control arms since “technically” you’re modifying the angles by installing the leveling kit, but to be honest it isn’t anything crazy with the angles or wheels that I am running, so it shouldn’t cause any major issues down the line. Factory tires are ~32” so I only went up about 1” in tire size and only came up 2” in the front so the angles should be fine and not cause any crazy stress on my ball joints or cv axles. Now I’ve seen some people running 22x12s and that would be a major stress on stock components. My point is, I honestly don’t know if it voided the warranty but even if it did I’m not concerned. It would only void the parts affected by the mods. Everything else is still covered.
badass truck bro 😎 I'm looking to get one of these in the next couple of months. Thanks for the tips.
Jonathan Vick thanks man! Go for it, you will love it!
So, the 33’s doesn’t fit at all? My trail boss came with 275/60r20. I really like the aggressive look, but I refuse to put leveling kit or lift my truck since I’m a short guy. I got depressed after seeing this video, but sweet ride, man.
You said This truck is a 4 x 4? Does it come with a 2 inch lift already installed like the trail boss or just regular factory?
Nice truck.
Thanks!
Which 2" level kit? Bottom or Top of strut? Thanks very nice
Just perfect
Do the LTZ & RST have the same stock Suspension? I just bought my first truck RST, & I’m looking for this wheel setup for past week, but this video you uploaded really reassured me & let me see how they would actually sit on the truck. But was not sure if the LTZ or RST has same suspension from factory? I know the Trail Boss has the lift from factory but not sure about LTZ
They have the same suspension man! Glad I could help!
Badass looking truck! I just got my 2020 also and wanna know if the shop trimmed any metal or just plastic from the mud flap?
Just plastic
Hey man, thanks for the video, nice ride!! When you added the 1/4 spacers, did you have to replace the factory lugs ?
Question about spacer, did you put them on the back too or just front? Cause the place where I got them they only put them on front
Very nice! I have the same truck with the factory blacked out logo and emblems. How did you remove the badges on the tailgate without scratching the paint?
I used some fishing line, heat gun, and a 3M magic eraser. Hit the badges with a heatgun very lightly just to loosen the glue up, otherwise can melt the clear coat. Then take fishing wire and run it behind the badges. Then take the 3M magic eraser to remove the residue and you’re good to go
Thanks so much!
What exactly did you have to trim there? This set up is what I need! Nice and clean with just enough stance for me.
Thanks man, However I Did not do the trimming. My local shop did everything.
Beaut bow tie! I just bought my 2021 same color and your look is what I’m going for as well, how do you like your vent visors on it? I’ve always had them on my other trucks & haven’t decided if I’m going to put them on (I love in channel weather tech’s vent visors, they’re great, I have my weather tech floor mats arriving tomorrow so I’m excited about those.
Do you have a link for your tires you bought? Just curious.
Thanks for walking around & showing your bow tie
Thanks! I love the vent visors and I have the EGR In-channel visors. As for tires, I got them on eBay.. they are the Venom Power Terra Hunter XT in size 33x12.50r20
Are these the 10 or 12 ply tires? See they offer both
1/4 spacer just on front or back too?
i have the same truck how did you mod the well
Getting a 2.5 level. 33x12.50 Toyo Rt trails, on 20x10 Fuel Throttle
How are the wheels balance any trouble?
Great looking truck! I have a 2020 RST and want to do a 2" level but worried the back will look lower. My front seems to be only 1 1/4 lower than the back. Did you measure before you installed the kit? If so what was the difference before ?
Thanks
Have the same truck it doesnt look low in the back with a 2”
@@ethancarter4475 what you think about a 2.5" level?
Looks great! Is the rough country level kit the one at the lower control arms? Thanks
It’s the 2” rough country hockey puck style I believe. My local shop did all the work and ordered all the parts.
I got a ‘19 Silverado RST with the same size wheels and tires. Custom offsets told me to get a 3/8 spacer but are hard to find. Does any other size spacer work. Like a 1/4 or 1/2 inch?
Eddie Anderson I have 1/4” all around
Do you have the link to the tailgate lettering ?
truck looks clean man. with running those spacers did you not modify the lug studs?
Nope no modification to the studs
With 12.5 wide tires how close are the tires to the UCA? I just bought 33/12.5/20 for my stock 20.9 wheels. My truck is leveled with the Eibach pro lift kit
I’m honestly not sure. They fit fine. But 12.50 wide tires wouldn’t be a good idea on 9 wide wheels. You need at least 10 wide.
Did you say 1/4” spacers? Or 1-1/4”? I can’t find any 1/4” but the truck looks great! Exactly what I wanna do.
1/4”. I did not initially plan to run the spacers but I had to for the rim to clear the brake caliper. Did a quick google search and found some. www.americantrucks.com/coyote-silverado-14-inch-wheel-spacers-911130.html
You post this on reddit? Your truck is badass looking
Very clean truck man! What exact 2in lift did you go with from rough country
Thanks! Just the standard 2” leveling kit
What size rim? And was that the factor size ?
I’m about to do omost this same set up on my 2031 Chevy Silverado. How did you gas mileage change from stock after you put this fit and wheels on?
No noticeable difference
Is that the diesel? If so what kind of MPG are you getting with set up. I’m on the verge of buying a 21 diesel 4x4 now and was curious what happens to MPG after bigger tires
No it’s not the diesel. I have the 5.3L v8
I’m get around 22+ on highway and around 17-18 around town
What color is GM calling your truck?
I have what’s called “Satin Steel Metallic “ & I love the color.
I have iced silver
If you ran a 3.5” lift in the front would the trimming still need to be done?
No idea since I don’t have a 3.5” lift.
Looks awesome . Did you paint the Chevrolet on the tailgate ?
Nope! They’re decal inserts I got off Amazon.
Funsport Tailgate Insert Letters... www.amazon.com/dp/B087CQHHDQ?ref=ppx_pop_mob_ap_share
What’s the backspacing on your wheels? Anything 5.5 should’ve cleared without a spacer
-24 and it didn’t clear.
How are those tires holding up? I’ve bought cheap knock offs before and told myself I’d never do it again. I want to go with the BFG a/t 2’s but they are over $400 a tire! Crazy!
Tires are holding up great and wearing perfectly even. Ride amazing!
Do you like the amount of poke? I'm really debating if I want that much or not, looking more at -12
Personally I love the stance. It is a bit wide but I like the look.
CLEEEEEEAAAANNNNNN!!!!
Preciate it!
Clean
😎👍🏼
truck looks great im planning to the same set up to my 19 i also drive my daily, so i dont want that off road sound inside thw truck lol , what tires are u using thanks
I’m running the venom power terra hunter XT, 33x12.50r20
thanks got a similar set up with the same tires getting them put on next week
I put a 2" levelling kit and I had problems with clunking in the front steering you had no problems.what parts you use
Just used a standard 2” rough country level. That’s all. Maybe you installed something wrong is the only thing I can think of because I have had zero issues rides like stock
Nice, exactly what I'm looking for on my 2019. Is there a wheel that will fit similar without the 1/4 inch spacer?
Yes I’m sure there is. However the calipers are so large in the front (they’re 4 piston) that most wheels require a 1/4” spacer at least. There has been no issues with me running them. Rides smooth as stock.
@@bradtswims thanks bud
@@bradtswims what brand spacer are they?
@@garybermudez6392 no idea man sorry. Shop installed them.
Do you get any rubbing now
I have a 2020 Z71 RST, that I want to do something very similar to this set up.
Do it! It’s the perfect daily setup.
@@bradtswims Yeah, im taking notes on set ups. though I probably wont get one until i move back to Texas
Did you need to upgrade the control arms and how does it ride?
Rides like factory and no I didn’t need to upgrade them. 33s on 20x10s isn’t anything super aggressive. If you go 35s or 12 wides then I would upgrade them.
What exactly did you cut out at the back of the wheel well, I have a 2020 Sierra sle 1500 I know the wheel wells are a little different, I have 20x10 -18 fuel blitz with bf Goodrich ko2 ats with a leveling kit and it rubs really bad in that spot you cut out, I’m gonna have to do the same thing
Just the fabric Liner and removed the bracket
Kevyn, I'm going to be running the same setup as you but I'll have the 3.5 rc lift, did you have to put spacers on those rims, I'll have the same setup
Why the 1/4” spacers for the caliper? …… The 20” diameter wheels aren’t big enough?
Rim wouldn’t clear the caliper.
You might want to measure that again. To me it looks like the back little lower then the front?
I’ve laser measured in my garage which is perfectly flat ground and I am 3’ 4” from the ground from each wheel well. However I can kinda see it but I only go off what the laser measure says so it’s level to me
How's it ride? I've been considering going up to 20s but was scared to loose my extra cushion of the bigger tires on my 18s
Rides just fine!
@@bradtswims awesome! I appreciate the reply
BTW, I have LTZ 2WD with same satin steel color & chrome package.
Doing same to my 2020 2 inch level 20x10
how are your tires performing? Considering buying some and was curious if you still like them or if you wished you had gone with a different brand
They’re great. Coming up on 5k miles and getting my first rotate / balance since install. No uneven wear that I can see. Ride super smooth and perform very well for a daily tire. Also very good in wet conditions, feel very planted. Slight hum at 50+ mph but that’s to be expected. I love the aggressive, yet moderate hybrid design. You can’t beat these for the price and honesty they’re riding just as good as my BFG KO2s I had before these which are double the price! I will be getting these again.
@@bradtswims I’ve had nothing but issues with balancing after about 8k miles on the same set of tires. They were great up until then. Just swapped mine out for Toyo AT2’s. Just couldn’t handle the bouncing. Hope you have better luck with yours friend. Nice set up btw.
@@JC-th2rl sorry to hear that man. I’m right around the 8k-ish mark and just had them rotated and balanced. They are still riding good for me. Maybe you got a bad set
With everything you’ve done to it, how’s the ride vs stock ride?
Rides just like factory. Only thing is the tires have a little more road noise but that is to be expected with a more aggressive tread pattern. It’s barley even noticeable. Rides amazing
Have you had any issues with the transmission shuttering or shifting hard?
Nope not at all. The 10 speed shifts smooth as butter
Wish I could say the same for the darn 8 speed. Mine has those shuddering and hard shift issues. They put the blue transmission fluid and it helped the shuddering go away, but still shifts hard at times.
Is this the loaded strut kit? Or just the regular $50 kit?
Looks great- looking to do this as well