BRRROOOOOOOOOOO!!! I know i said that mopar parts where compatible with each other, but this was something i always wondered about. I need this in my life bro. I honestly can stand the downshifts in the 200 limited. Omg this got me excited. Boi you best believe, first chance i get, IM DOING THIS!! As always bro, another great video!! I enjoyed the shit outta this one!!
On one of your videos you had said you were going to do a review on the obd scanner and proxy machine. Currently my radio doesn’t work which I’ve seen it’s typically the bms controller. I want to try to fix it myself and then run a proxy to see if it fixes it
i feel like if i were to do this i would somehow break my whole 200....also on my tiktok people keep asking me to do a Hellcat swap for the engine, but idk if it would even fit, ik it would fit in the 300, but idk about the 200
Thanks bro it worked 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥 , I just have one more question how did you . How did you get your cluster to tell you when to shift up on the side of the mph while you driving in the video cause my doesn’t tell me that
Dope I was planning on getting the shifters because I dont like the auto shift feels weird but was you test driving it with that Throttle Controller from the other video? Or was that removed?
i followed your video to a T. but it doesnt work on my car. The only thing I diddnt do is upgrade the gage cluster. i have 2015 200 limited. installed both, the s shifter and wheel with paddles. did the proxy alignment but the padles wont work. any suggestions?
say boss the proxy alignment works the paddles work but when i put the car in sport or just want to use the the paddles it doesn't show the D1 or the S1 it shows D or S but what should i need help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.
Paddle shifter enabling 1. Select your vehicle 2. Body computer 3. Select body computer Delphi/Marelli 4. Connect to OBD link MX 5. Click the little red car(bottom right corner) 6. Select procedure to start: Select “Car Configuration change” 7. Select options: Select “paddle shift”( scroll almost half way) 8. Select value : Enabled Shifter module PRNDS enabling 1. Do the first 6 steps for paddle shifter enabling 2. Select options: Select “shifter type variant” (Scroll half way and scroll a little further down) 3. Select Value: “5 position Rotary Eshifter PRNDS” (Last one on the list) At the End of either of these steps Proxy AGAIN !!!! Enable first then Proxy !
Hello friend, I am a follower of yours and I am writing to ask you why my 2017 chrysler 200 limited does not deactivate the traction control. In fact, it doesn't even turn on. Thank you, I would appreciate more if you could help me.
Were you able to get the mileage to stop flashing? Everything works as it should, it fails to update instrument panel during proxy. says wrong request length or invalid request format.
Not having any luck with my install. Do you NEED the upgraded gauge cluster? You and I have the same car, just wondering if thats a missing feature I nees
If you are at the proxy part , make sure you are enabled for paddle and sport mode , if you don’t know how here is the steps bro ! Paddle shifter enabling 1. Select your vehicle 2. Body computer 3. Select body computer Delphi/Marelli 4. Connect to OBD link MX 5. Click the little red car(bottom right corner) 6. Select procedure to start: Select “Car Configuration change” 7. Select options: Select “paddle shift”( scroll almost half way) 8. Select value : Enabled Shifter module PRNDS enabling 1. Do the first 6 steps for paddle shifter enabling 2. Select options: Select “shifter type variant” (Scroll half way and scroll a little further down) 3. Select Value: “5 position Rotary Eshifter PRNDS” (Last one on the list)
Helppp!! I did all that you did buttttt non of my buttons are working on my wheel . I can’t set nor res and the paddles don’t work . Thank you if you can help!🙏🏽
Paddle shifter enabling 1. Select your vehicle 2. Body computer 3. Select body computer Delphi/Marelli 4. Connect to OBD link MX 5. Click the little red car(bottom right corner) 6. Select procedure to start: Select “Car Configuration change” 7. Select options: Select “paddle shift”( scroll almost half way) 8. Select value : Enabled Shifter module PRNDS enabling 1. Do the first 6 steps for paddle shifter enabling 2. Select options: Select “shifter type variant” (Scroll half way and scroll a little further down) 3. Select Value: “5 position Rotary Eshifter PRNDS” (Last one on the list) At the End of either of these steps Proxy AGAIN !!!! Enable first then Proxy ! Try this bro
@@moderatemods98 is there a way you can ft me or dm on Instagram ? You can block me after idc I just want this to work 😭😭 I’m already getting pops when it downshifts itself but this will help
Just out of curiosity. If I don't have the computer to do the proxy , would the dealer be able to do it ? I mean thanks to your help they did a proxy on my radio when I changed it to the 8.4 inch.. so would they do it with the paddle and shifter too?
@@moderatemods98 and just another question bro.. can I just installed the knob shifter first and do the paddle later ? Because I can get the knob shifter anytime but I don't if I need both to make work... because I was thinking about to put the knob shifter first and do the proxy .. so do you think it will work like that? Or do I need both ?
@@moderatemods98 I see thanks.. and I forgot to mention something else... I changed my cluster to the 7 inch and it was originally from an S so when I put my car on L I noticed on the cluster says S , you know instead of saying L it says S so does that means that when I get the S knob shifter I won't need a proxy. ? Like if I put the S knob shifter how would I know if is working?? . Thanks in advance
No there isn’t a really true way to change the millage , I heard you can send it out and people can possibly change it but I don’t think it’s worth it !
my bad for the extremely late response GEEZ!! but yeah bro to do the proxy and enable for the paddles you will need the obd link as well as Alpha OBD (App) to connect to it with !
I don’t know the part number unfortunately bro but if you type in Chrysler paddle shifters you will find them , they work off the dodges Jeep’s and SRTs !
@@avetisghevondyan7868 hey man no problem ! And your welcome ! So if it does then you should be able to use it ! You will also need “Alpha OBD” android App Store $50 and then you will be able to do everything! If you ever need anything else let me know !
@@moderatemods98 Ok, should be the last question, my paddle shifters come in tmr, and my new transmission gear selector comes in a few days from now, do I need to do a proxy to make the paddle shifters work? Also can I install the new module without a proxy, to at least get myself to the dealership to have the proxy done? Or what should I do? Thx!
@@moderatemods98 No they don't. I have a Gen 1, and I love paddle shifting, and its so frustrating that I've gotten like 10 different answers, and none of them seem to be reliable across sources xD The shifter knob already has the manual gear selection mode, but I'm not totally sure what it would take to install paddle shifters.
@@OverAndOverAndOver bro honestly anything is possible now will it be simple like this , probably not just because these cars have literally the exact same set up , except one has paddles one doesn’t so it’s just plug and proxy enable and play ! So unfortunately I am another one of those sources because I don’t want to give you wrong info , now you could try like a custom shop in your area and see if they can create something lol it would be awesome and definitely a first ! 💯🔥
@@moderatemods98 Have to say, you have the best instructions on this installation. Other are suing a lot of different things. I’ll give this a shot. Thanks!
So if I put paddles on my limited do I need to swap out the stock shifter with Low mode to a sport shifter with Sport mode? Will the paddles not work with the stock limited shifter?
Damn bro you a year late😭, but nah I did everything he said I even took it a step up and got the hellcat paddles bc he said they would work I got my obd tool I did the whole install and I turned my car on and they never worked I installed the s shifter too didn’t work it said s on the dashboard but never worked
@Theyluhhjai try these steps make sure you always proxy align with alpha OBD Paddle shifter enabling 1. Select your vehicle 2. Body computer 3. Select body computer Delphi/Marelli 4. Connect to OBD link MX 5. Click the little red car(bottom right corner) 6. Select procedure to start: Select “Car Configuration change” 7. Select options: Select “paddle shift”( scroll almost half way) 8. Select value : Enabled Shifter module PRNDS enabling 1. Do the first 6 steps for paddle shifter enabling 2. Select options: Select “shifter type variant” (Scroll half way and scroll a little further down) 3. Select Value: “5 position Rotary Eshifter PRNDS” (Last one on the list) 7” Cluster Enabling Change Cluster Type From TFT Black and white to TFT Color At the End of either of these steps Proxy AGAIN !!!! Enable first then Proxy !
@@moderatemods98 dang man you’re a year late too I enjoyed watching your build your car is beautiful but I don’t even have my 200 anymore sadly my girl was totaled last November
BRRROOOOOOOOOOO!!! I know i said that mopar parts where compatible with each other, but this was something i always wondered about. I need this in my life bro. I honestly can stand the downshifts in the 200 limited. Omg this got me excited. Boi you best believe, first chance i get, IM DOING THIS!! As always bro, another great video!! I enjoyed the shit outta this one!!
All I can say is your welcome 💯💪🏽🔥
From 1:40 to 1:52 lmaoo i was watching without watching and had to rewind to see what’s going on
🤣🤣🔥 keep up bro lmfao
That’s dope. I’m definitely going to do this as soon as possible
Hell yeah bro hit me up on IG if you have any questions at all !! 🔥💯
On one of your videos you had said you were going to do a review on the obd scanner and proxy machine. Currently my radio doesn’t work which I’ve seen it’s typically the bms controller. I want to try to fix it myself and then run a proxy to see if it fixes it
YESSS LETS GO BRO !!
Yessss 🔥💯💪🏽😈
i feel like if i were to do this i would somehow break my whole 200....also on my tiktok people keep asking me to do a Hellcat swap for the engine, but idk if it would even fit, ik it would fit in the 300, but idk about the 200
Ehhh the hell cat swap would be nuts but trust me you got a better chance of breaking the car with that then this 🤣 you could do it bro trust me
@@moderatemods98 lmaoooo, maybe i could do the 3.6L v6 for it but idk, i want to make is faster, but idk what to di
Bro yes I was thinking the same thing , but I found out stuff about our trannys so I’m moving towards a dart turbo kit !
Thanks bro it worked 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥 , I just have one more question how did you . How did you get your cluster to tell you when to shift up on the side of the mph while you driving in the video cause my doesn’t tell me that
What’s up bro !! So do you have the 7” cluster like the bigger one ?
@@moderatemods98 yeah I do I went all out the same as you
Broo you is legendary
I appreciate it homie 💯💪🏽🔥
hi bro, it's worked, thank you!!!
Your very welcome bro !!!
Can you add paddle shifters to a Chrysler 300c 2006 5.7 hemi?
You guys are great
Thank you man ! Really appreciate that ! Hope this helps and if you ever have other questions let me know !
Dope I was planning on getting the shifters because I dont like the auto shift feels weird but was you test driving it with that Throttle Controller from the other video? Or was that removed?
That was with both on a medium setting !
My boy 🔥💪🏾
😈🔥💯yeahhhh man
Does this work on the 200C also? I know it seems like a stupid question but I'm new to chrysler.
Yes it does! Your all good bro!
Really cool
Will this work for my 300?
Maybe bro look into some forums on alpha OBD on the 300 , it may be doable !
Can you do this with a base model 200?
i followed your video to a T. but it doesnt work on my car. The only thing I diddnt do is upgrade the gage cluster. i have 2015 200 limited. installed both, the s shifter and wheel with paddles. did the proxy alignment but the padles wont work. any suggestions?
Yes one last step !!
say boss the proxy alignment works the paddles work but when i put the car in sport or just want to use the the paddles it doesn't show the D1 or the S1 it shows D or S but what should i need help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.
and as well on the the screen where it say Gear - OR + it pops when it wants to when in sport mode should do the proxy again.???????
Got you bro !!! Follow these steps here !!
Paddle shifter enabling
1. Select your vehicle
2. Body computer
3. Select body computer Delphi/Marelli
4. Connect to OBD link MX
5. Click the little red car(bottom right corner)
6. Select procedure to start: Select “Car Configuration change”
7. Select options: Select “paddle shift”( scroll almost half way)
8. Select value : Enabled
Shifter module PRNDS enabling
1. Do the first 6 steps for paddle shifter enabling
2. Select options: Select “shifter type variant” (Scroll half way and scroll a little further down)
3. Select Value: “5 position Rotary Eshifter PRNDS” (Last one on the list)
At the End of either of these steps Proxy AGAIN !!!! Enable first then Proxy !
I saw you at south bend
574 baby 💯🔥
You think this would work for a 2017 300 limited? Also why not just use the 200 s steering wheel? With paddles already installed?
Do I need to get the paddle shifters if I want to install the gear knob?
No you do not !!
@@moderatemods98 awesome! Thanks
Heck yeah bro !
Do you really have to remove the air bag to get to connector for the shifter connectors?
Yeah :( but it’s not that bad bro !
@@moderatemods98 I’m scare my airbag won’t deploy. 😬
@@carljean Lolol just in hook battery and wait a while before doing anything and you will be all good bro !
@@moderatemods98 okay. I’ll do that
Help! I can’t find that alpha obd app for iphone!! 😢
Hello friend, I am a follower of yours and I am writing to ask you why my 2017 chrysler 200 limited does not deactivate the traction control. In fact, it doesn't even turn on. Thank you, I would appreciate more if you could help me.
Were you able to get the mileage to stop flashing? Everything works as it should, it fails to update instrument panel during proxy. says wrong request length or invalid request format.
Not having any luck with my install. Do you NEED the upgraded gauge cluster? You and I have the same car, just wondering if thats a missing feature I nees
What step are you getting too bro ?
If you are at the proxy part , make sure you are enabled for paddle and sport mode , if you don’t know how here is the steps bro !
Paddle shifter enabling
1. Select your vehicle
2. Body computer
3. Select body computer Delphi/Marelli
4. Connect to OBD link MX
5. Click the little red car(bottom right corner)
6. Select procedure to start: Select “Car Configuration change”
7. Select options: Select “paddle shift”( scroll almost half way)
8. Select value : Enabled
Shifter module PRNDS enabling
1. Do the first 6 steps for paddle shifter enabling
2. Select options: Select “shifter type variant” (Scroll half way and scroll a little further down)
3. Select Value: “5 position Rotary Eshifter PRNDS” (Last one on the list)
And once you enable those you have to do another proxy alignment ! And then you should be good !
Would this be the same with updating the speedometer by chance? Tying to save a buck going to the dealer
Lol I have a 200 s and I love it but it’s definitely fun
Yes sir !
will this work for a 2018 chrysler 300?
Hi friend,
I would like to know, paddle shifter is working in D (drive mode) or only in S (sport model)???
Both bro check out my video showing how they work !
ruclips.net/video/ppigPGMRtbw/видео.html
I can’t find the original obd Mx scanner, do you know if the mx+ can do the same thing ?
Yes it defiantly should be able to bro !
So if i don’t want the heated steering wheel i can just buy a whole new one with paddle shifters and install it ?
Yes ! You can get those flat bottom ones anything that holds the dodge , Chrysler’s air bags !!
@modere mods
I was trying to update my radio and it stopped at step 11 .any idea?
Hmmm make sure you enable, then proxy again if using Alpha OBD
I added the paddle shifters and ran the proxy alignment and it isnt working what should I do
Helppp!! I did all that you did buttttt non of my buttons are working on my wheel . I can’t set nor res and the paddles don’t work . Thank you if you can help!🙏🏽
And yes everything is plugged in , I check twice
Paddle shifter enabling
1. Select your vehicle
2. Body computer
3. Select body computer Delphi/Marelli
4. Connect to OBD link MX
5. Click the little red car(bottom right corner)
6. Select procedure to start: Select “Car Configuration change”
7. Select options: Select “paddle shift”( scroll almost half way)
8. Select value : Enabled
Shifter module PRNDS enabling
1. Do the first 6 steps for paddle shifter enabling
2. Select options: Select “shifter type variant” (Scroll half way and scroll a little further down)
3. Select Value: “5 position Rotary Eshifter PRNDS” (Last one on the list)
At the End of either of these steps Proxy AGAIN !!!! Enable first then Proxy !
Try this bro
@@moderatemods98 I did
@@moderatemods98 is there a way you can ft me or dm on Instagram ? You can block me after idc I just want this to work 😭😭 I’m already getting pops when it downshifts itself but this will help
Lololol your funny as hell saying block me right after ! I can for sure message me on IG ! “Moderate_mods”
Dopeeee
Yes Broo 🙏💯🔥
Were these 2016 parts that worked on your 2015?
Yes sir!
Hey what app can you use on apple
At the moment I just don’t know :(
Just out of curiosity. If I don't have the computer to do the proxy , would the dealer be able to do it ? I mean thanks to your help they did a proxy on my radio when I changed it to the 8.4 inch.. so would they do it with the paddle and shifter too?
Yes they would bro !
@@moderatemods98 and just another question bro.. can I just installed the knob shifter first and do the paddle later ? Because I can get the knob shifter anytime but I don't if I need both to make work... because I was thinking about to put the knob shifter first and do the proxy .. so do you think it will work like that? Or do I need both ?
Yup you can do the knob first get it proxyed and have sport mode just no paddles buddy !
@@moderatemods98 I see thanks.. and I forgot to mention something else... I changed my cluster to the 7 inch and it was originally from an S so when I put my car on L I noticed on the cluster says S , you know instead of saying L it says S so does that means that when I get the S knob shifter I won't need a proxy. ? Like if I put the S knob shifter how would I know if is working?? . Thanks in advance
Can you use the obd link mix to change your mileage..I'm looking to upgrade my speedometer
No there isn’t a really true way to change the millage , I heard you can send it out and people can possibly change it but I don’t think it’s worth it !
@@moderatemods98 thanks bro but keep the videos coming I'm getting a lot of ideas 2 upgrade my 200
Will do bro I’m sorry we can’t change it :/ kinda sucks lol but I’m not stopping anytime soon ! 💯💪🏽
Will the obdLink mx plus work the same for proxy or does it need to be the regular mx to work
I already got the S but do you have the obd mx +?
my bad for the extremely late response GEEZ!! but yeah bro to do the proxy and enable for the paddles you will need the obd link as well as Alpha OBD (App) to connect to it with !
Got a resource purchase link for the pedal shifters?
No unfortunately because they are single sales on EBay but they are all over bro !
@@moderatemods98 well what's the part number you got?
I don’t know the part number unfortunately bro but if you type in Chrysler paddle shifters you will find them , they work off the dodges Jeep’s and SRTs !
You are using ObdLink MX+ for programming
Can I programming with ObdLink LX???
Not to sure does it have Bluetooth to android?
@@moderatemods98 yea, it's have
@@moderatemods98 I am from Armenia, sorry for my English, and thank you for responding
@@avetisghevondyan7868 hey man no problem ! And your welcome ! So if it does then you should be able to use it ! You will also need “Alpha OBD” android App Store $50 and then you will be able to do everything! If you ever need anything else let me know !
@@moderatemods98 ok, thanks
I can’t find the app
Can you please put some link to help me find it
do you think this would work on a dart
Crazy like a fox
😈🔥
@@moderatemods98 all you need now the S badge and the seats which some have cooling and heating seats with the S badge sitching
@@Joeyblackblue1408 yes I know lololol
Do I gotta have shifters to do s mode
No bro, no need to have paddles to add sport
Do I have to have the new dial shifter to make the paddle shifters work?
No bro !
@@moderatemods98 Awesome! Cause I ordered some paddle shifters, and gonna get a new shifter soon, and wasn’t sure if it was gonna work or not.
Yeah bro ! It’s all good !
@@moderatemods98 Ok, should be the last question, my paddle shifters come in tmr, and my new transmission gear selector comes in a few days from now, do I need to do a proxy to make the paddle shifters work? Also can I install the new module without a proxy, to at least get myself to the dealership to have the proxy done? Or what should I do? Thx!
Link to that OBD reader on amazon please
Should be in description bro but if not “ MX+ OBD LINK “
@@moderatemods98 where you get the windshield banner?
Got it made at my buddy’s tint shop , “ ATS Window Tint” in Rochester IN.
@@moderatemods98long live chryslers 200 limited. I got the same one too
Where’s the link to this?
I can’t link the specific paddles I got cause they were a one time sale but there is more out there bro !
Does this same method work with a Gen 1, like a 2011?
That’s a awesome question , so I don’t know exactly , do the gen 1 have a paddle shifter option on some of there cars ?
@@moderatemods98 No they don't. I have a Gen 1, and I love paddle shifting, and its so frustrating that I've gotten like 10 different answers, and none of them seem to be reliable across sources xD The shifter knob already has the manual gear selection mode, but I'm not totally sure what it would take to install paddle shifters.
@@OverAndOverAndOver bro honestly anything is possible now will it be simple like this , probably not just because these cars have literally the exact same set up , except one has paddles one doesn’t so it’s just plug and proxy enable and play ! So unfortunately I am another one of those sources because I don’t want to give you wrong info , now you could try like a custom shop in your area and see if they can create something lol it would be awesome and definitely a first ! 💯🔥
Is this compatible with the 2.4L 4- Cylinder?
Oh yes ! Mine is the 2.4 bro !
@@moderatemods98 You the man! Appreciate you! Do you have any recommendations on bigger fuel Injectors?
Bro keep uploading 200 content haha
for sure bro not stopping anytime soon !
Would this process work for a 300 as well?
Honestly bro it damn near might ! It’s all proxy ! You may need to do some research! But it just might 💯💪🏽
@@moderatemods98 Have to say, you have the best instructions on this installation. Other are suing a lot of different things. I’ll give this a shot. Thanks!
@@rylovlogs6756 my best wishes to you bro and please hit me up if you got any more questions !!
Can I pay you to do it?
Install I can do but proxy would need to be done with dealer I don’t have the equipment to use Alpha OBD
tnx !
Welcome bro !
So if I put paddles on my limited do I need to swap out the stock shifter with Low mode to a sport shifter with Sport mode? Will the paddles not work with the stock limited shifter?
That shit don’t work I just did the whole install yesterday proxy and all and the paddles don’t even work smh
@@Theyluhhjaiwoahhh what happened?
Damn bro you a year late😭, but nah I did everything he said I even took it a step up and got the hellcat paddles bc he said they would work I got my obd tool I did the whole install and I turned my car on and they never worked I installed the s shifter too didn’t work it said s on the dashboard but never worked
@Theyluhhjai try these steps make sure you always proxy align with alpha OBD
Paddle shifter enabling
1. Select your vehicle
2. Body computer
3. Select body computer Delphi/Marelli
4. Connect to OBD link MX
5. Click the little red car(bottom right corner)
6. Select procedure to start: Select “Car Configuration change”
7. Select options: Select “paddle shift”( scroll almost half way)
8. Select value : Enabled
Shifter module PRNDS enabling
1. Do the first 6 steps for paddle shifter enabling
2. Select options: Select “shifter type variant” (Scroll half way and scroll a little further down)
3. Select Value: “5 position Rotary Eshifter PRNDS” (Last one on the list)
7” Cluster Enabling
Change Cluster Type From TFT Black and white to TFT Color
At the End of either of these steps Proxy AGAIN !!!! Enable first then Proxy !
@@moderatemods98 dang man you’re a year late too I enjoyed watching your build your car is beautiful but I don’t even have my 200 anymore sadly my girl was totaled last November
LOL wassup
Yooo!
@@moderatemods98 I showed my channrl
@@raf3745 haha yes bro it will be big soon !
Признавайся следишь за украинскими крайслерами ?
Hey bro I love this idea and I wanna make that same change to mine too, I can’t seem to fine your buddy on IG
Buy your own